The PHENIX experiment has measured the suppression of semi-inclusive single high transverse momentum pi^0's in Au+Au collisions at sqrt(s_NN) = 200 GeV. The present understanding of this suppression is in terms of energy-loss of the parent (fragmenting) parton in a dense color-charge medium. We have performed a quantitative comparison between various parton energy-loss models and our experimental data. The statistical point-to-point uncorrelated as well as correlated systematic uncertainties are taken into account in the comparison. We detail this methodology and the resulting constraint on the model parameters, such as the initial color-charge density dN^g/dy, the medium transport coefficient <q^hat>, or the initial energy-loss parameter epsilon_0. We find that high transverse momentum pi^0 suppression in Au+Au collisions has sufficient precision to constrain these model dependent parameters at the +/1 20%-25% (one standard deviation) level. These constraints include only the experimental uncertainties, and further studies are needed to compute the corresponding theoretical uncertainties.
$\pi^0$ $0-5\%$ centrality
Yields for J/psi production in Cu+Cu collisions at sqrt (s_NN)= 200 GeV have been measured by the PHENIX experiment over the rapidity range |y| < 2.2 at transverse momenta from 0 to beyond 5 GeV/c. The invariant yield is obtained as a function of rapidity, transverse momentum and collision centrality, and compared with results in p+p and Au+Au collisions at the same energy. The Cu+Cu data provide greatly improved precision over existing Au+Au data for J/psi production in collisions with small to intermediate numbers of participants, providing a key constraint that is needed for disentangling cold and hot nuclear matter effects.
J/PSI yield versus transverse momentum PT, at mid rapidity : -0.35<y<0.35, for a centrality range of 0-20%.
J/psi-->e+e- invariant yield in Cu+Cu collisions as a function of p_T at mid-rapidity for the 0-20 centrality range. The statistical and systematic uncertainties vary point-to-point and are listed for each measured value. An additional global systematic uncertainty is provided in each column heading, which applies to all data points per column.
J/PSI yield versus transverse momentum PT, at mid rapidity : -0.35<y<0.35, for a centrality range of 20-40%.
A three-dimensional (3D) correlation function obtained from mid-rapidity, low pT pion pairs in central Au+Au collisions at sqrt(s_NN)=200 GeV is studied. The extracted model-independent source function indicates a long range tail in the directions of the pion pair transverse momentum (out) and the beam (long). Model comparisons to these distensions indicate a proper breakup time \tau_0 ~ 9 fm/c and a mean proper emission duration \Delta\tau ~ 2 fm/c, leading to sizable emission time differences (<|\Delta \tau_LCM |> ~ 12 fm/c), partly due to resonance decays. They also suggest an outside-in 'burning' of the emission source reminiscent of many hydrodynamical models.
1D correlation function. Systematic errors are less than the statistical errors.
Experimental correlation moments $R^0(q)$ Data. Systematic errors are less than the statistical errors.
Experimental correlation moments $R^0(q)$ Fit. Systematic errors are less than the statistical errors.
A search for non-resonant new phenomena, originating from either contact interactions or large extra spatial dimensions, has been carried out using events with two isolated electrons or muons. These events, produced at the LHC in proton-proton collisions at sqrt(s) = 7 TeV, were recorded by the ATLAS detector. The data sample, collected throughout 2011, corresponds to an integrated luminosity of 4.9 and 5.0 fb-1 in the e+e- and mu+mu- channels, respectively. No significant deviations from the Standard Model expectation are observed. Using a Bayesian approach, 95% confidence limit lower limits ranging from 9.0 to 13.9 TeV are placed on the energy scale of llqq contact interactions in the left-left isoscalar model. Lower limits ranging from 2.4 to 3.9 TeV are also set on the string scale in large extra dimension models. After combination of these limits with results from a similar search in the diphoton channel, slightly more stringent limits are obtained.
Expected and observed numbers of events in the dielectron channel for the contact interactions search region. The yields are normalized to the Z peak control region and include predictions for SM backgrounds as well as for SM+CI with different CI scales for constructive (LAMBDA-) and destructive (LAMBDA+) interference. The errors quoted originate from both systematic uncertainties and limited MC statistics.
Expected and observed numbers of events in the dimuon channel for the contact interactions search region. The yields are normalized to the Z peak control region and include predictions for SM backgrounds as well as for SM+CI with different CI scales for constructive (LAMBDA-) and destructive (LAMBDA+) interference. The errors quoted originate from both systematic uncertainties and limited MC statistics.
Expected and observed 95% C.L. lower limits on the contact interaction energy scale LAMBDA for the dielectron and dimuon channels, as well as for the combination of those channels. Results are provided for constructive and destruc- tive interference as well as different choices of flat priors.
Many extensions of the Standard Model posit the existence of heavy particles with long lifetimes. In this Letter, results are presented of a search for such particles, which decay at a significant distance from their production point, using a final state containing charged hadrons and an associated muon. This analysis uses a data sample of proton-proton collisions at sqrt(s)= 7 TeV corresponding to an integrated luminosity of 4.4 fb-1 collected in 2011 by the ATLAS detector operating at the Large Hadron Collider. Results are interpreted in the context of R-parity violating supersymmetric scenarios. No events in the signal region are observed and limits are set on the production cross section for supersymmetric particles, multiplied by the square of the branching ratio for a neutralino to decay to charged hadrons and a muon, as a function of the neutralino lifetime. To allow these limits to be used in a variety of models, they are presented for a range of squark and neutralino masses.
Efficiency-vs-radial-vertex-position without re-tracking The efficiency for reconstructing a displaced vertex passing all cuts, as a function of radial distance from the z-axis to the vertex positon. The retrack and noretrack suffixes refer to whether or not the procedure known as re-tracking, where the tracking algorithm is re-run with looser cuts, on the leftover hits from standard tracking, was used to select the tracks that were input to the vertexing algorithm.
Efficiency-vs-radial-vertex-position with re-tracking The efficiency for reconstructing a displaced vertex passing all cuts, as a function of radial distance from the z-axis to the vertex positon. The retrack and noretrack suffixes refer to whether or not the procedure known as re-tracking, where the tracking algorithm is re-run with looser cuts, on the leftover hits from standard tracking, was used to select the tracks that were input to the vertexing algorithm.
Event selection efficiency vs mean proper decay length The MH, HH, ML suffix used for overlaying the graphs refers to the combinations of squark and neutralino masses in the signal MC sample: MH is 700GeV squarks and 494GeV neutralinos, HH is 1.5TeV squarks and 494GeV neutralinos, and ML is 700GeV squarks and 108GeV neutralinos. The tables show the efficiency for reconstructing a signal event, where at least one vertex candidate passes all selection requirements, as a function of the proper decay length c*tau of the neutralino.
Measurements of inclusive jet suppression in heavy ion collisions at the LHC provide direct sensitivity to the physics of jet quenching. In a sample of lead-lead collisions at $\sqrt{s_{NN}}$ = 2.76 TeV corresponding to an integrated luminosity of approximately 7 inverse microbarns, ATLAS has measured jets with a calorimeter over the pseudorapidity interval |$\eta$| < 2.1 and over the transverse momentum range 38 < pT < 210 GeV. Jets were reconstructed using the anti-$k_t$ algorithm with values for the distance parameter that determines the nominal jet radius of R = 0.2, 0.3, 0.4 and 0.5. The centrality dependence of the jet yield is characterized by the jet "central-to-peripheral ratio," $R_{cp}$. Jet production is found to be suppressed by approximately a factor of two in the 10% most central collisions relative to peripheral collisions. $R_{cp}$ varies smoothly with centrality as characterized by the number of participating nucleons. The observed suppression is only weakly dependent on jet radius and transverse momentum. These results provide the first direct measurement of inclusive jet suppression in heavy ion collisions and complement previous measurements of dijet transverse energy imbalance at the LHC.
Glauber model calculation of the mean numbers of Npart and its associated errors, the mean Ncoll ratios, and Rcoll with fractional errors as a function of the centrality bins.
The Rcp values as a function of jet PT for the four R values, 0.2, 0.3, 0.4 and 0.5 for the collision centrality in the range 0 - 10 %.
The Rcp values as a function of jet PT for the four R values, 0.2, 0.3, 0.4 and 0.5 for the collision centrality in the range 10 - 20 %.
Using 1.8 fb-1 of pp collisions at a center-of-mass energy of 7 TeV recorded by the ATLAS detector at the Large Hadron Collider, we present measurements of the production cross sections of Upsilon(1S,2S,3S) mesons. Upsilon mesons are reconstructed using the di-muon decay mode. Total production cross sections for p_T<70 GeV and in the rapidity interval |Upsilon|<2.25 are measured to be 8.01+-0.02+-0.36+-0.31 nb, 2.05+-0.01+-0.12+-0.08 nb, 0.92+-0.01+-0.07+-0.04 nb respectively, with uncertainties separated into statistical, systematic, and luminosity measurement effects. In addition, differential cross section times di-muon branching fractions for Upsilon(1S), Upsilon(2S), and Upsilon(3S) as a function of Upsilon transverse momentum p_T and rapidity are presented. These cross sections are obtained assuming unpolarized production. If the production polarization is fully transverse or longitudinal with no azimuthal dependence in the helicity frame the cross section may vary by approximately +-20%. If a non-trivial azimuthal dependence is considered, integrated cross sections may be significantly enhanced by a factor of two or more. We compare our results to several theoretical models of Upsilon meson production, finding that none provide an accurate description of our data over the full range of Upsilon transverse momenta accessible with this dataset.
Corrected cross-section measurements in the isotopic spin-alignment scenario. The second (sys) error is the uncertainty in the luminosity.
Fiducial Upsilon(1S) production cross-section, where pT>4 GeV and |eta|<2.3 for both muons, as a function of Upsilon(1S) pT in the Upsilon(1S) rapidity (|y|) bins 0-1.2 and 1.2-2.25. The first uncertainty is statistical, the second is systematic.
Fiducial Upsilon(2S) production cross-section, where pT>4 GeV and |eta|<2.3 for both muons, as a function of Upsilon(2S) pT in the Upsilon(2S) rapidity (|y|) bins 0-1.2 and 1.2-2.25. The first uncertainty is statistical, the second is systematic.
This paper presents a search for the t-channel exchange of an R-parity violating scalar top quark (\={t}) in the emu continuum using 2.1/fb of data collected by the ATLAS detector in sqrt(s) = 7 TeV pp collisions at the Large Hadron Collider. Data are found to be consistent with the expectation from the Standard Model backgrounds. Limits on R-parity-violating couplings at 95% C.L. are calculated as a function of the scalar top mass (m_{\={t}}). The upper limits on the production cross section for pp->emuX, through the t-channel exchange of a scalar top quark, ranges from 170 fb for m_{\={t}}=95 GeV to 30 fb for m_{\={t}}=1000 GeV.
The observed E-MU invariant mass distribution plus SM background and signal predicitons for a n stop mass of 95 GeV.
Information about the signal samples used.
The ratios of the observed and expected upper cross section limits to the theoretical cross sections as a function of the scalar top mass.
Measurements are presented of the properties of high transverse momentum jets, produced in proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV. The data correspond to an integrated luminosity of 35 pb^-1 and were collected with the ATLAS detector in 2010. Jet mass, width, eccentricity, planar flow and angularity are measured for jets reconstructed using the anti-kt algorithm with distance parameters R = 0.6 and 1.0, with transverse momentum pT > 300 GeV and pseudorapidity |eta| < 2. The measurements are compared to the expectations of Monte Carlo generators that match leading-logarithmic parton showers to leading-order, or next-to-leading-order, matrix elements. The generators describe the general features of the jets, although discrepancies are observed in some distributions.
The jet mass distribution for R=0.6 jets in the full 2010 dataset corrected for pileup and corrected to the particle level.
The jet mass distribution for R=1.0 jets in the full 2010 dataset corrected for pileup and corrected to the particle level.
The jet width distribution for R=0.6 jets in the full 2010 dataset corrected for pileup and corrected to the particle level.
A search for supersymmetry (SUSY) in events with large missing transverse momentum, jets, and at least one hadronically decaying tau lepton, with zero or one additional light lepton (e/mu), has been performed using 4.7 fb-1 of proton-proton collision data at sqrt(s) = 7 TeV recorded with the ATLAS detector at the Large Hadron Collider. No excess above the Standard Model background expectation is observed and a 95% confidence level visible cross-section upper limit for new phenomena is set. In the framework of gauge-mediated SUSY-breaking models, lower limits on the mass scale Lambda are set at 54 TeV in the regions where the stau is the next-to-lightest SUSY particle (tan(beta) > 20). These limits provide the most stringent tests to date of GMSB models in a large part of the parameter space considered.
The observed number of signal events as a function of Lambda and Tan(Beta).
The Acceptance, Efficiency and Acceptance x Efficiency for the single tau channel as a function of Lambda and Tan(Beta).
The Acceptance, Efficiency and Acceptance x Efficiency for the two tau channel as a function of Lambda and Tan(Beta).
Forum