Showing 10 of 6816 results
A search for supersymmetry in events with large missing transverse momentum, jets, and at least one hadronically decaying $\tau$-lepton is presented. Two exclusive final states with either exactly one or at least two $\tau$-leptons are considered. The analysis is based on proton-proton collisions at $\sqrt{s}$ = 13 TeV corresponding to an integrated luminosity of 36.1 fb$^{-1}$ delivered by the Large Hadron Collider and recorded by the ATLAS detector in 2015 and 2016. No significant excess is observed over the Standard Model expectation. At 95% confidence level, model-independent upper limits on the cross section are set and exclusion limits are provided for two signal scenarios: a simplified model of gluino pair production with $\tau$-rich cascade decays, and a model with gauge-mediated supersymmetry breaking (GMSB). In the simplified model, gluino masses up to 2000 GeV are excluded for low values of the mass of the lightest supersymmetric particle (LSP), while LSP masses up to 1000 GeV are excluded for gluino masses around 1400 GeV. In the GMSB model, values of the supersymmetry-breaking scale are excluded below 110 TeV for all values of $\tan\beta$ in the range $2 \leq \tan\beta \leq 60$, and below 120 TeV for $\tan\beta>30$.
1$\tau$ Compressed SR eff.
1$\tau$ Compressed SR eff.
1$\tau$ MediumMass SR eff.
1$\tau$ MediumMass SR eff.
2$\tau$ Compressed SR eff.
2$\tau$ Compressed SR eff.
2$\tau$ HighMass SR eff.
2$\tau$ HighMass SR eff.
2$\tau$ multibin SR eff.
2$\tau$ multibin SR eff.
2$\tau$ GMSB SR eff.
2$\tau$ GMSB SR eff.
1$\tau$ Compressed SR eff.
1$\tau$ Compressed SR eff.
1$\tau$ MediumMass SR eff.
1$\tau$ MediumMass SR eff.
2$\tau$ Compressed SR eff.
2$\tau$ Compressed SR eff.
2$\tau$ HighMass SR eff.
2$\tau$ HighMass SR eff.
2$\tau$ multibin SR eff.
2$\tau$ multibin SR eff.
2$\tau$ GMSB SR eff.
2$\tau$ GMSB SR eff.
1$\tau$ Compressed SR acceptance.
1$\tau$ Compressed SR acceptance.
1$\tau$ MediumMass SR acceptance.
1$\tau$ MediumMass SR acceptance.
2$\tau$ Compressed SR acceptance.
2$\tau$ Compressed SR acceptance.
2$\tau$ HighMass SR acceptance.
2$\tau$ HighMass SR acceptance.
2$\tau$ multibin SR acceptance.
2$\tau$ multibin SR acceptance.
2$\tau$ GMSB SR acceptance.
2$\tau$ GMSB SR acceptance.
1$\tau$ Compressed SR acceptance.
1$\tau$ Compressed SR acceptance.
1$\tau$ MediumMass SR acceptance.
1$\tau$ MediumMass SR acceptance.
2$\tau$ Compressed SR acceptance.
2$\tau$ Compressed SR acceptance.
2$\tau$ HighMass SR acceptance.
2$\tau$ HighMass SR acceptance.
2$\tau$ multibin SR acceptance.
2$\tau$ multibin SR acceptance.
2$\tau$ GMSB SR acceptance.
2$\tau$ GMSB SR acceptance.
Cutflow table of the $1\tau$ compressed SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $1\tau$ compressed SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $1\tau$ medium-mass SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $1\tau$ medium-mass SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $2\tau$ compressed SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $2\tau$ compressed SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $2\tau$ high-mass SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $2\tau$ high-mass SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $2\tau$ multibin SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $2\tau$ multibin SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $2\tau$ GMSB SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Cutflow table of the $2\tau$ GMSB SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.
Best performing fit setups entering the final combination as a function of the LSP mass and the gluino mass. 'S' marks the simultaneous fit of the four simplified model single-bin SRs, 'M' denotes the simultaneous fit of the two $1\tau$ SRs and the $2\tau$ multibin SR.
Best performing fit setups entering the final combination as a function of the LSP mass and the gluino mass. 'S' marks the simultaneous fit of the four simplified model single-bin SRs, 'M' denotes the simultaneous fit of the two $1\tau$ SRs and the $2\tau$ multibin SR.
Observed exclusion contour at 95% CL as a function of tanBeta and the SUSY-breaking mass scale Lambda.
Observed exclusion contour at 95% CL as a function of tanBeta and the SUSY-breaking mass scale Lambda.
Expected exclusion contour at 95% CL as a function of tanBeta and the SUSY-breaking mass scale Lambda.
Expected exclusion contour at 95% CL as a function of tanBeta and the SUSY-breaking mass scale Lambda.
Observed exclusion contour at 95% CL as a function of the LSP mass and the gluino mass.
Observed exclusion contour at 95% CL as a function of the LSP mass and the gluino mass.
Expected exclusion contour at 95% CL as a function of the LSP mass and the gluino mass.
Expected exclusion contour at 95% CL as a function of the LSP mass and the gluino mass.
Observed upper limits on the production cross section at 95% CL in pb as a function of tanBeta and SUSY breaking mass scale Lambda.
Observed upper limits on the production cross section at 95% CL in pb as a function of tanBeta and SUSY breaking mass scale Lambda.
Observed upper limits on the production cross section at 95% CL in pb as a function of the LSP mass and the gluino mass.
Observed upper limits on the production cross section at 95% CL in pb as a function of the LSP mass and the gluino mass.
Yields of the expected background from the SM in the bins of the multibin SR of the $2\tau$ channel with all bins being simultaneously used to constrain the background prediction. Expectation is given with the scalings computed in the combined fit applied. Uncertainties are statistial plus systematrics. Only the subsamples contributing the respective region are considered.
Yields of the expected background from the SM in the bins of the multibin SR of the $2\tau$ channel with all bins being simultaneously used to constrain the background prediction. Expectation is given with the scalings computed in the combined fit applied. Uncertainties are statistial plus systematrics. Only the subsamples contributing the respective region are considered.
$m_{\mathrm{T}}^{\tau}$ in the compressed $m_{\mathrm{T}}^{\tau}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$m_{\mathrm{T}}^{\tau}$ in the compressed $m_{\mathrm{T}}^{\tau}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$E_{\mathrm{T}}^{\mathrm{miss}}$ in the compressed $E_{\mathrm{T}}^{\mathrm{miss}}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$E_{\mathrm{T}}^{\mathrm{miss}}$ in the compressed $E_{\mathrm{T}}^{\mathrm{miss}}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$m_{\mathrm{T}}^{\tau}$ in the medium-mass $m_{\mathrm{T}}^{\tau}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$m_{\mathrm{T}}^{\tau}$ in the medium-mass $m_{\mathrm{T}}^{\tau}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$E_{\mathrm{T}}^{\mathrm{miss}}$ in the medium-mass $E_{\mathrm{T}}^{\mathrm{miss}}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$E_{\mathrm{T}}^{\mathrm{miss}}$ in the medium-mass $E_{\mathrm{T}}^{\mathrm{miss}}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$H_{\mathrm{T}}$ in the medium-mass $H_{\mathrm{T}}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$H_{\mathrm{T}}$ in the medium-mass $H_{\mathrm{T}}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$m_{\mathrm{T}}^{\tau_1}$ + $m_{\mathrm{T}}^{\tau_2}$ in the top VR of the $2\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$m_{\mathrm{T}}^{\tau_1}$ + $m_{\mathrm{T}}^{\tau_2}$ in the top VR of the $2\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$H_{\mathrm{T}}$ in the $W$ VR of the $2\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$H_{\mathrm{T}}$ in the $W$ VR of the $2\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$m_{\mathrm{T}}^{\tau_1}$ + $m_{\mathrm{T}}^{\tau_2}$ in the $Z$ VR of the $2\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$m_{\mathrm{T}}^{\tau_1}$ + $m_{\mathrm{T}}^{\tau_2}$ in the $Z$ VR of the $2\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.
$m_{\mathrm{T}}^{\tau}$ in the compressed SR of the $1\tau$ channel before application of the $m_{\mathrm{T}}^{\tau}$ > 80 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
$m_{\mathrm{T}}^{\tau}$ in the compressed SR of the $1\tau$ channel before application of the $m_{\mathrm{T}}^{\tau}$ > 80 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
$H_{\mathrm{T}}$ in the medium-mass SR of the $1\tau$ channel before application of the $H_{\mathrm{T}}$ > 1000 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
$H_{\mathrm{T}}$ in the medium-mass SR of the $1\tau$ channel before application of the $H_{\mathrm{T}}$ > 1000 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
$m_{\mathrm{T}}^{\mathrm{sum}}$ in the compressed SR of the $2\tau$ channel before application of the $m_{\mathrm{T}}^{\mathrm{sum}}$ > 1600 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
$m_{\mathrm{T}}^{\mathrm{sum}}$ in the compressed SR of the $2\tau$ channel before application of the $m_{\mathrm{T}}^{\mathrm{sum}}$ > 1600 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
$H_{\mathrm{T}}$ in the high-mass SR of the $2\tau$ channel before application of the $H_{\mathrm{T}}$ > 1100 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
$H_{\mathrm{T}}$ in the high-mass SR of the $2\tau$ channel before application of the $H_{\mathrm{T}}$ > 1100 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
mT(tau_1) + mT(tau_2) in the multibin SR of the 2T channel. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
mT(tau_1) + mT(tau_2) in the multibin SR of the 2T channel. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
$H_{\mathrm{T}}$ in the GMSB SR of the $2\tau$ channel before application of the $H_{\mathrm{T}}$ > 1900 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
$H_{\mathrm{T}}$ in the GMSB SR of the $2\tau$ channel before application of the $H_{\mathrm{T}}$ > 1900 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.
A search for charged Higgs boson decaying to a charm and a bottom quark (H$^+\to$ c$\overline{\mathrm{b}}$) is performed using 19.7 fb$^{-1}$ of pp collision data at $\sqrt{s} =$ 8 TeV. The production mechanism investigated in this search is $\mathrm{t\overline{t}}$ pair production in which one top quark decays to a charged Higgs boson and a bottom quark and the other decays to a charged lepton, a neutrino, and a bottom quark. Charged Higgs boson decays to $\mathrm{c\overline{b}}$ are searched for, resulting in a final state containing at least four jets, a charged lepton (muon or electron), and missing transverse momentum. A kinematic fit is performed to identify the pair of jets least likely to be the bottom quarks originating from direct top quark decays and the invariant mass of this pair is used as the final observable in the search. No evidence for the presence of a charged Higgs boson is observed and upper limits at 95% confidence level of 0.8-0.5% are set on the branching fraction $\mathcal{B}$(t $\to$ H$^+$b), assuming $\mathcal{B}$(H$^+\to$ $\mathrm{c\overline{b}}) =$ 1.0 and $\mathcal{B}$(t $\to$ H$^+$b) $+$ $\mathcal{B}$(t $\to$ Wb) = 1.0, for the charged Higgs boson mass range 90-150 GeV.
The 95% CL upper limits on the branching fraction of top quark to a charged Higgs boson and bottom quark depending on the expected charged Higgs mass. For this limit calculation, B(t --> H+ b) + B(t --> W b) = 1.0 and B(H+ --> cb) = 1.0 are assumed.
The cross-section for prompt antiproton production in collisions of protons with an energy of $6.5$ TeV incident on helium nuclei at rest is measured with the LHCb experiment from a data set corresponding to an integrated luminosity of $0.5\,nb^{-1}$. The target is provided by injecting helium gas into the LHC beam line at the LHCb interaction point. The reported results, covering antiproton momenta between $12$ and $110\,\mathrm{GeV/}c$, represent the first direct determination of the antiproton production cross-section in ${\rm p He}$ collisions, and impact the interpretation of recent results on antiproton cosmic rays from space-borne experiments.
Double-differential cross-section in antiproton momentum and transverse momentum for antiproton production in collisions of 6.5 TeV protons on He nuclei at rest. The antiproton momentum is defined in the laboratory frame. Results are averaged over the given kinematic range of each bin. The uncertainty is split into an uncertainty delta_uncorr, uncorrelated among the kinematic bins, and an uncertainty delta_corr, fully correlated among the kinematic bins. For both uncertainties, the systematic uncertainty, dominant for most bins, and the statistical uncertainty, are added in quadrature. The average value within each bin is also reported for the antiproton momentum, the transverse momentum, and x-Feynman xF=2 p_Z*/SQRT(S), where p_Z* is the longitudinal antiproton momentum in the center-of-mass system and SQRT(S) the nucleon-nucleon center-of-mass energy. These average values are obtained from simulation (based on EPOS LHC), to avoid biases from reconstruction effects and given the good agreement with data observed for the simulated kinematic spectra.
Double-differential cross-section in antiproton momentum and transverse momentum for antiproton production in collisions of 6.5 TeV protons on He nuclei at rest. The antiproton momentum is defined in the laboratory frame. Results are averaged over the given kinematic range of each bin. The uncertainty is split into an uncertainty delta_uncorr, uncorrelated among the kinematic bins, and an uncertainty delta_corr, fully correlated among the kinematic bins. For both uncertainties, the systematic uncertainty, dominant for most bins, and the statistical uncertainty, are added in quadrature. The average value within each bin is also reported for the antiproton momentum, the transverse momentum, and x-Feynman xF=2 p_Z*/SQRT(S), where p_Z* is the longitudinal antiproton momentum in the center-of-mass system and SQRT(S) the nucleon-nucleon center-of-mass energy. These average values are obtained from simulation (based on EPOS LHC), to avoid biases from reconstruction effects and given the good agreement with data observed for the simulated kinematic spectra.
Measurements of the $\pi^{\pm}$, $K^{\pm}$, and proton double differential yields emitted from the surface of the 90-cm-long carbon target (T2K replica) were performed for the incoming 31 GeV/c protons with the NA61/SHINE spectrometer at the CERN SPS using data collected during 2010 run. The double differential $\pi^{\pm}$ yields were measured with increased precision compared to the previously published NA61/SHINE results, while the $K^{\pm}$ and proton yields were obtained for the first time. A strategy for dealing with the dependence of the results on the incoming proton beam profile is proposed. The purpose of these measurements is to reduce significantly the (anti)neutrino flux uncertainty in the T2K long-baseline neutrino experiment by constraining the production of (anti)neutrino ancestors coming from the T2K target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.
This Letter presents a search for heavy charged long-lived particles produced in proton-proton collisions at $\sqrt{s} = 13$ TeV at the LHC using a data sample corresponding to an integrated luminosity of 36.1 fb$^{-1}$ collected by the ATLAS experiment in 2015 and 2016. These particles are expected to travel with a velocity significantly below the speed of light, and therefore have a specific ionisation higher than any high-momentum Standard Model particle of unit charge. The pixel subsystem of the ATLAS detector is used in this search to measure the ionisation energy loss of all reconstructed charged particles which traverse the pixel detector. Results are interpreted assuming the pair production of $R$-hadrons as composite colourless states of a long-lived gluino and Standard Model partons. No significant deviation from Standard Model background expectations is observed, and lifetime-dependent upper limits on $R$-hadron production cross-sections and gluino masses are set, assuming the gluino always decays in two quarks and a stable neutralino. $R$-hadrons with lifetimes above 1.0 ns are excluded at the 95% confidence level, with lower limits on the gluino mass ranging between 1290 GeV and 2060 GeV. In the case of stable $R$-hadrons, the lower limit on the gluino mass at the 95% confidence level is 1890 GeV.
The number of events in each CR, VR, and SR for the predicted background, for the expected contribution from the signal model normalised to $36.1$ fb$^{-1}$, and in the observed data. The predicted background includes the statistical and systematic uncertainties, respectively. The uncertainty in the signal yield includes all systematic uncertainties except that in the theoretical cross-section.
The number of events in each CR, VR, and SR for the predicted background, for the expected contribution from the signal model normalised to $36.1$ fb$^{-1}$, and in the observed data. The predicted background includes the statistical and systematic uncertainties, respectively. The uncertainty in the signal yield includes all systematic uncertainties except that in the theoretical cross-section.
Expected number of $R$-hadron signal events at different stages of the selection, normalised to $36.1$ fb$^{-1}$. Shown for three different signal points is the number of events expected and the number of events expected in which the selected track has been matched to a generated $R$-hadron. If the gluino decays, it decays to a 100 GeV $\tilde{\chi}^{0}$ and SM quarks.
The observed and expected 95% CL upper limits on model-independent visible cross-sections, along with the observed $p0$ values, for the stable signal region, as a function of different mass windows, for which the lower bound is shown. The upper boundary on the mass window is 5 TeV for all windows.
The observed and expected 95% CL upper limits on model-independent visible cross-sections, along with the observed $p0$ values, for the metastable signal region, as a function of different mass windows, for which the lower bound is shown. The upper boundary on the mass window is 5 TeV for all windows.
For each gluino lifetime and mass in the signal samples, the lower boundary of the mass window in which at least $70\%$ of the reconstructed signal appears. The upper boundary for all mass windows is 5 TeV.
Acceptance and efficiency for a representative set of pair-produced gluino signal samples. The mass of the gluino ($m(\tilde{g})$), its lifetime ($\tau(\tilde{g})$) and the mass of the neutralino ($m(\tilde{\chi}^{0})$) are given in the first three columns. The Pythia 6.4.27 signal samples shown in this table are not reweighted to match the transverse momentum of the gluino-gluino system as simulated by MadGraph5_aMC@NLO. The acceptance is defined as the fraction of events passing a loose set of fiducial requirements. The full simulation efficiency (Full sim. $\epsilon$) is defined as the ratio of the number of reconstructed events, as expected by the full ATLAS simulation, and the number of events passing the fiducial requirements. The parameterised simulation efficiency (Param. sim. $\epsilon$) is defined as the ratio of the number of events estimated using a set of parametrised efficiencies (see auxiliary Figures 9,10,11,12) and the number of events passing the fiducial requirements alone.
The reconstructed candidate track mass distributions for observed data, predicted background, and the expected contribution from two signal models in the metastable R-hadron signal region. The yellow band around the background estimation includes both the statistical and systematic uncertainties.
The reconstructed candidate track mass distributions for observed data, predicted background, and the expected contribution from two signal models in the stable R-hadron signal region. The yellow band around the background estimation includes both the statistical and systematic uncertainties.
The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 10$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.
The 95% CL upper limit on the cross-section as a function of mass for stable gluino $R$-hadrons, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.
Observed 95% lower limits on the gluino mass in the gluino lifetime--mass plane. The excluded area is to the left of the curves.
Expected 95% lower limits on the gluino mass in the gluino lifetime--mass plane. The excluded area is to the left of the curves.
The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 1$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.
The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 3$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.
The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 30$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.
The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 50$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.
The relationship between generated and reconstructed mass for gluino $R$-hadrons. Above 1500 GeV, the reconstructed mass falls below the generated mass due to bias in the reconstructed momentum. The uncertainty on the reconstructed mass is dominated by momentum uncertainty. The black dots represent the reconstructed mass computed as the most probable value of a Gaussian fit function, with the error bars showing its statistical uncertainty, while the orange band is the full-width at half maximum of the reconstructed mass distribution.
The parameterised efficiency for events to pass metastable event selections (including trigger, E$_{T}^{miss}$, and event cleaning requirements) as a function of the true E$_{T}^{miss}$ in the system, which is calculated at generator level. Event-level efficiencies are evaluated for events which have at least true E$_{T}^{miss} > 50$ GeV. The metastable event efficiencies are evaluated for different radial regions depending on the smallest radial distance, R, at which an R-hadron decays in the detector.
The parameterised efficiency for events to pass metastable event selections (including trigger, E$_{T}^{miss}$, and event cleaning requirements) as a function of the true E$_{T}^{miss}$ in the system, which is calculated at generator level. Event-level efficiencies are evaluated for events which have at least true E$_{T}^{miss} > 50$ GeV. The stable event efficiencies are evaluated for samples in which no R-hadron decays within the detector.
The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.
The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.
The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.
The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.
The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.
The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$. The stable efficiency is evaluated for samples which do not decay within the detector. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.
Measurements of the azimuthal anisotropy in lead-lead collisions at $\sqrt{s_\mathrm{NN}} = 5.02$ TeV are presented using a data sample corresponding to 0.49 $\mathrm{nb}^{-1}$ integrated luminosity collected by the ATLAS experiment at the LHC in 2015. The recorded minimum-bias sample is enhanced by triggers for "ultra-central" collisions, providing an opportunity to perform detailed study of flow harmonics in the regime where the initial state is dominated by fluctuations. The anisotropy of the charged-particle azimuthal angle distributions is characterized by the Fourier coefficients, $v_{2}-v_{7}$, which are measured using the two-particle correlation, scalar-product and event-plane methods. The goal of the paper is to provide measurements of the differential as well as integrated flow harmonics $v_{n}$ over wide ranges of the transverse momentum, 0.5 $
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V2{SP} over V2{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V3{SP} over V3{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V4{SP} over V4{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V5{SP} over V5{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V6{SP} over V6{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-15%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-25%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-35%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-45%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-55%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-15%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-25%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-35%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-45%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-55%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 0-5%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 10-15%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 20-25%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 30-35%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 40-45%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 50-55%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 0-5%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 10-15%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 20-25%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 30-35%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 40-45%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 50-55%
The PT scale factor for V2(PT) as a funtion of collision centrality
The PT scale factor for V3(PT) as a funtion of collision centrality
The V2 scale factor as a funtion of collision centrality
The V3 scale factor as a funtion of collision centrality
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
A search for charged Higgs bosons heavier than the top quark and decaying via $H^\pm \rightarrow tb$ is presented. The data analysed corresponds to 36.1 fb$^{-1}$ of $pp$ collisions at $\sqrt{s}$ = 13 TeV and was recorded with the ATLAS detector at the LHC in 2015 and 2016. The production of a charged Higgs boson in association with a top quark and a bottom quark, $pp \rightarrow tb H^\pm$, is explored in the mass range from $m_{H^\pm}$ = 200 to 2000 GeV using multi-jet final states with one or two electrons or muons. Events are categorised according to the multiplicity of jets and how likely these are to have originated from hadronisation of a bottom quark. Multivariate techniques are used to discriminate between signal and background events. No significant excess above the background-only hypothesis is observed and exclusion limits are derived for the production cross-section times branching fraction of a charged Higgs boson as a function of its mass, which range from 2.9 pb at $m_{H^\pm}$ = 200 GeV to 0.070 pb at $m_{H^\pm}$ = 2000 GeV. The results are interpreted in two benchmark scenarios of the Minimal Supersymmetric Standard Model.
Expected and observed limits for the production of $H^{+} \to tb$ in association with a top quark and a bottom quark. The bands surrounding the expected limit show the 68% and 95% confidence intervals. The limits are based on the combination of the $\ell+$jets and $\ell\ell$ final states. Theory predictions are shown for three representative values of $\tan\beta$ in the $m_h^{\mathrm{mod-}}$ benchmark scenario. Uncertainties in the predicted $H^+$ cross-sections or branching ratios are not considered.
Expected and observed upper limits on $\tan\beta$ as a function of $m_{H^{+}}$ in the $m_h^{\mathrm{mod-}}$ scenario of the MSSM. Limits are shown for $\tan\beta$ values in the range of 0.5-60, where predictions are available from both scenarios. The bands surrounding the expected limits show the 68% and 95% confidence intervals. The limits are based on the combination of the $\ell+$jets and $\ell\ell$ final states. The production cross-section of $t\bar{t}H$ and $tH$, as well as the branching ratios of the $H$, are fixed to their SM values at each point in the plane. Uncertainties on the predicted $H^{+}$ cross-sections or branching ratios are not considered.
Expected and observed lower limits on $\tan\beta$ as a function of $m_{H^{+}}$ in the $m_h^{\mathrm{mod-}}$ scenario of the MSSM. Limits are shown for $\tan\beta$ values in the range of 0.5-60, where predictions are available from both scenarios. The bands surrounding the expected limits show the 68% and 95% confidence intervals. The limits are based on the combination of the $\ell+$jets and $\ell\ell$ final states. The production cross-section of $t\bar{t}H$ and $tH$, as well as the branching ratios of the $H$, are fixed to their SM values at each point in the plane. Uncertainties on the predicted $H^{+}$ cross-sections or branching ratios are not considered.
Expected and observed upper limits on $\tan\beta$ as a function of $m_{H^{+}}$ in the hMSSM scenario of the MSSM. Limits are shown for $\tan\beta$ values in the range of 0.5-60, where predictions are available from both scenarios. The bands surrounding the expected limits show the 68% and 95% confidence intervals. The limits are based on the combination of the $\ell+$jets and $\ell\ell$ final states. The production cross-section of $t\bar{t}H$ and $tH$, as well as the branching ratios of the $H$, are fixed to their SM values at each point in the plane. Uncertainties on the predicted $H^{+}$ cross-sections or branching ratios are not considered.
Expected and observed lower limits on $\tan\beta$ as a function of $m_{H^{+}}$ in the hMSSM scenario of the MSSM. Limits are shown for $\tan\beta$ values in the range of 0.5-60, where predictions are available from both scenarios. The bands surrounding the expected limits show the 68% and 95% confidence intervals. The limits are based on the combination of the $\ell+$jets and $\ell\ell$ final states. The production cross-section of $t\bar{t}H$ and $tH$, as well as the branching ratios of the $H$, are fixed to their SM values at each point in the plane. Uncertainties on the predicted $H^{+}$ cross-sections or branching ratios are not considered.
Results are reported from a search for long-lived particles in proton-proton collisions at $\sqrt{s} =$ 13 TeV delivered by the CERN LHC and collected by the CMS experiment. The data sample, which was recorded during 2015 and 2016, corresponds to an integrated luminosity of 38.5 fb$^{-1}$. This search uses benchmark signal models in which long-lived particles are pair-produced and each decays into two or more quarks, leading to a signal with multiple jets and two displaced vertices composed of many tracks. No events with two well-separated high-track-multiplicity vertices are observed. Upper limits are placed on models of $R$-parity violating supersymmetry in which the long-lived particles are neutralinos or gluinos decaying solely into multijet final states or top squarks decaying solely into dijet final states. For neutralino, gluino, or top squark masses between 800 and 2600 GeV and mean proper decay lengths between 1 and 40 mm, the analysis excludes cross sections above 0.3 fb at 95% confidence level. Gluino and top squark masses are excluded below 2200 and 1400 GeV, respectively, for mean proper decay lengths between 0.6 and 80 mm. A method is provided for extending the results to other models with pair-produced long-lived particles.
Distribution of the distance between vertices in the $x$-$y$ plane, $d_{VV}$, for simulated multijet signals with $m$ = 800 GeV, production cross section 1 fb, and $c\tau$ = 0.3, 1.0, and 10 mm, with the background template overlaid. All vertex and event selection criteria have been applied. The last bin includes the overflow events.
Signal efficiency as a function of signal mass and lifetime for the multijet signal samples. All vertex and event selection criteria have been applied, as well as the requirement $d_{VV}$ > 0.4 mm.
Signal efficiency as a function of signal mass and lifetime for the dijet signal samples. All vertex and event selection criteria have been applied, as well as the requirement $d_{VV}$ > 0.4 mm.
Distribution of $d_{BV}$ in $\geq$5-track one-vertex events for data and simulated multijet signals with $m$ = 800 GeV, production cross section 1 fb, and $c\tau$ = 0.3, 1.0, and 10 mm. Event preselection and vertex selection criteria have been applied. The last bin includes the overflow events.
Distribution of the distance between vertices in the $x$-$y$ plane in events with two 3-track vertices. The points show the data ($d_{VV}$), and the solid lines show the background template ($d_{VV}^{C}$) normalized to the data. The last bin includes the overflow events. The dotted lines indicate the boundaries between the three bins used in the fit.
Distribution of the distance between vertices in the $x$-$y$ plane in events with one 4-track vertex and one 3-track vertex. The points show the data ($d_{VV}$), and the solid lines show the background template ($d_{VV}^{C}$) normalized to the data. The last bin includes the overflow events. The dotted lines indicate the boundaries between the three bins used in the fit.
Distribution of the distance between vertices in the $x$-$y$ plane in events with two 4-track vertices. The points show the data ($d_{VV}$), and the solid lines show the background template ($d_{VV}^{C}$) normalized to the data. The last bin includes the overflow events. The dotted lines indicate the boundaries between the three bins used in the fit.
Distribution of the distance between vertices in the $x$-$y$ plane in events with two $\geq$5-track vertices. The points show the data ($d_{VV}$), and the solid lines show the background template ($d_{VV}^{C}$) normalized to the data. The last bin includes the overflow events. The dotted lines indicate the boundaries between the three bins used in the fit.
Observed 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of mass and mean proper decay length.
Observed 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of mass and mean proper decay length.
Mass exclusion curves for the multijet signals, assuming gluino pair production cross sections and 100% branching fraction.
Mass exclusion curves for the dijet signals, assuming top squark pair production cross sections and 100% branching fraction.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of mass for a fixed $c\tau$ of 0.3 mm. The gluino pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of mass for a fixed $c\tau$ of 0.3 mm. The top squark pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of mass for a fixed $c\tau$ of 1.0 mm. The gluino pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of mass for a fixed $c\tau$ of 1.0 mm. The top squark pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of mass for a fixed $c\tau$ of 10 mm. The gluino pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of mass for a fixed $c\tau$ of 10 mm. The top squark pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of $c\tau$ for a fixed mass of 800 GeV.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of $c\tau$ for a fixed mass of 800 GeV.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of $c\tau$ for a fixed mass of 1600 GeV.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of $c\tau$ for a fixed mass of 1600 GeV.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of $c\tau$ for a fixed mass of 2400 GeV.
Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of $c\tau$ for a fixed mass of 2400 GeV.
A search for the pair production of resonances, each decaying to two quarks, is reported. The search is conducted separately for heavier resonances (masses above 400 GeV), where each of the four final-state quarks generates a hadronic jet resulting in a four-jet signature, and for lighter resonances (masses between 80 and 400 GeV), where the pair of quarks from each resonance is collimated and reconstructed as a single jet resulting in a two-jet signature. In addition, a b-tagged selection is applied to target resonances with a bottom quark in the final state. The analysis uses data collected with the CMS detector at the CERN LHC, corresponding to an integrated luminosity of 35.9 fb$^{-1}$, from proton-proton collisions at a center-of-mass energy of 13 TeV. The mass spectra are analyzed for the presence of new resonances, and are found to be consistent with standard model expectations. The results are interpreted in the framework of $R$-parity-violating supersymmetry assuming the pair production of scalar top quarks decaying via the hadronic coupling $\lambda_{312}"$ or $\lambda_{323}"$, and upper limits on the cross section as a function of the top squark mass are set. These results probe lower masses than previously explored at the LHC, and extend the top squark mass limits in the $\widetilde{\mathrm{t}}$$\to$qq$'$ scenario.
Signal efficiency as a function of stop mass for the inclusive and b-tagged selections. Efficiency is estimated from the number of events in the simulated sample passing the full signal selection in a two sigma window around the true mass compared with the total number of events generated. No generator-level requirements are applied in the generation.
Boosted search average pruned mass distribution for data (black points) and for the total background prediction for the inclusive selection.
Boosted search average pruned mass distribution for data and for the total background prediction for the b-tagged selection.
Resolved search distribution of average dijet mass for the data, along with the resulting fit to the functional form for the inclusive selection
Resolved search distribution of average dijet mass for the data, along with the resulting fit to the functional form for the b-tagged selection
Signal efficiency as a function of stop mass for the inclusive and b-tagged selections. Efficiency is estimated from the number of events in the simulated sample passing the full signal selection in a two sigma window around the true mass compared with the total number of events generated. No generator-level requirements are applied in the generation.
Observed and expected 95% CL upper limits on the signal cross section as a function of stop mass. The branching fraction to quarks is assumed to be 100%. The boosted analysis probes 80 <= stop mass <= 400 GeV, while the resolved analysis searches for stop masses >= 400 GeV. Limits using the inclusive selection for stop to qq' assuming the RPV coupling lambda''. Theory cross sections correspond to the values agreed upon in the LHC SUSY cross section group.
Observed and expected 95% CL upper limits on the signal cross section as a function of stop mass. The branching fraction to quarks is assumed to be 100%. The boosted analysis probes 80 <= stop mass <= 400 GeV, while the resolved analysis searches for stop masses >= 400 GeV. Limits using the inclusive selection for stop to qq' assuming the RPV coupling lambda''. Theory cross sections correspond to the values agreed upon in the LHC SUSY cross section group.
A combination of the searches for pair-produced vector-like partners of the top and bottom quarks in various decay channels ($T$$\rightarrow$$Zt/Wb/Ht$, $B$$\rightarrow$$Zb/Wt/Hb$) is performed using 36.1 fb$^{-1}$ of $pp$ collision data at $\sqrt{s}$ = 13 TeV with the ATLAS detector at the Large Hadron Collider. The observed data are found to be in good agreement with the Standard Model background prediction in all individual searches. Therefore, combined 95% confidence-level upper limits are set on the production cross-section for a range of vector-like quark scenarios, significantly improving upon the reach of the individual searches. Model-independent limits are set assuming the vector-like quarks decay to Standard Model particles. A singlet $T$ is excluded for masses below 1.31 TeV and a singlet $B$ is excluded for masses below 1.22 TeV. Assuming a weak isospin $(T,B)$ doublet and $|V_{Tb}| \ll |V_{tB}|$, $T$ and $B$ masses below 1.37 TeV are excluded.
Expected and observed 95% lower limits on the vector-like top quark mass as a function of the branching ratio, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks).
Expected and observed 95% lower limits on the vector-like bottom quark mass as a function of the branching ratio, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks).
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 800 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 900 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 950 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1000 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1050 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1100 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1150 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1200 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1300 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1400 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 800 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 900 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 950 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1000 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1050 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1100 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1150 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1200 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1300 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1400 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status
Email
Forum
Twitter
GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.