Showing 10 of 34 results
The production cross-sections for $W^{\pm}$ and $Z$ bosons are measured using ATLAS data corresponding to an integrated luminosity of 4.0 pb$^{-1}$ collected at a centre-of-mass energy $\sqrt{s}=2.76$ TeV. The decay channels $W \rightarrow \ell \nu$ and $Z \rightarrow \ell \ell $ are used, where $\ell$ can be an electron or a muon. The cross-sections are presented for a fiducial region defined by the detector acceptance and are also extrapolated to the full phase space for the total inclusive production cross-section. The combined (average) total inclusive cross-sections for the electron and muon channels are: \begin{eqnarray} \sigma^{\text{tot}}_{W^{+}\rightarrow \ell \nu}& = & 2312 \pm 26\ (\text{stat.})\ \pm 27\ (\text{syst.}) \pm 72\ (\text{lumi.}) \pm 30\ (\text{extr.})\text{pb} \nonumber, \\ \sigma^{\text{tot}}_{W^{-}\rightarrow \ell \nu}& = & 1399 \pm 21\ (\text{stat.})\ \pm 17\ (\text{syst.}) \pm 43\ (\text{lumi.}) \pm 21\ (\text{extr.})\text{pb} \nonumber, \\ \sigma^{\text{tot}}_{Z \rightarrow \ell \ell}& = & 323.4 \pm 9.8\ (\text{stat.}) \pm 5.0\ (\text{syst.}) \pm 10.0\ (\text{lumi.}) \pm 5.5 (\text{extr.}) \text{pb} \nonumber. \end{eqnarray} Measured ratios and asymmetries constructed using these cross-sections are also presented. These observables benefit from full or partial cancellation of many systematic uncertainties that are correlated between the different measurements.
Measured fiducial cross section times leptonic branching ratio for W+ production in the W+ -> e+ nu final state.
Measured fiducial cross section times leptonic branching ratio for W+ production in the W+ -> mu+ nu final state.
Measured fiducial cross section times leptonic branching ratio for W- production in the W- -> e- nu final state.
Measured fiducial cross section times leptonic branching ratio for W- production in the W- -> mu- nu final state.
Measured fiducial cross section times leptonic branching ratio for Z/gamma* production in the Z/gamma* -> e+ e- final state.
Measured fiducial cross section times leptonic branching ratio for Z/gamma* production in the Z/gamma* -> mu+ mu- final state.
Measured total cross section times leptonic branching ratio for W+ production in the W+ -> e+ nu final state.
Measured total cross section times leptonic branching ratio for W+ production in the W+ -> mu+ nu final state.
Measured total cross section times leptonic branching ratio for W- production in the W- -> e- nu final state.
Measured total cross section times leptonic branching ratio for W- production in the W- -> mu- nu final state.
Measured total cross section times leptonic branching ratio for Z/gamma* production in the Z/gamma* -> e+ e- final state.
Measured total cross section times leptonic branching ratio for Z/gamma* production in the Z/gamma* -> mu+ mu- final state.
Combined fiducial cross-section measurements for W+ boson production in the W+ -> l+ nu (l = e, mu) final state.
Combined fiducial cross-section measurements for W- boson production in the W- -> l- nu (l = e, mu) final state.
Combined fiducial cross-section measurements for W boson production in the W -> l nu (l = e, mu) final state.
Combined fiducial cross-section measurements for Z/gamma* production in the Z/gamma* -> l- l+ (l = e, mu) final state.
Combined total cross-section measurements for W+ boson production in the W+ -> l+ nu (l = e, mu) final state.
Combined total cross-section measurements for W- boson production in the W- -> l- nu (l = e, mu) final state.
Combined total cross-section measurements for W boson production in the W -> l nu (l = e, mu) final state.
Combined total cross-section measurements for Z/gamma* production in the Z/gamma* -> l- l+ (l = e, mu) final state.
Measured fiducial cross-section ratio R_{W+-/Z} = sigma (W+/- -> l+/- nu/nubar) / sigma (Z/gamma^* -> l+ l-) where l = e, mu.
Measured fiducial cross-section ratio R_{W+/W-} = sigma (W+ -> l+ nu) / sigma (W- -> l- nubar) where l = e, mu.
Measured charge asymmetry in W-boson production A_{l} = ( sigma (W+ -> l+ nu) - sigma (W- -> l- nubar) ) / ( sigma (W+ -> l+ nu) + sigma (W- -> l- nubar) ) where l = e, mu.
The ratio of measured W+ cross-sections in the electron and muon decay channels R_{W+} = sigma (W+ -> e+ nu) / sigma (W+ -> mu+ nu)
The ratio of measured W- cross-sections in the electron and muon decay channels R_{W-} = sigma (W- -> e- nu) / sigma (W- -> mu- nu)
The ratio of measured W cross-sections in the electron and muon decay channels R_{W} = sigma (W -> e nu) / sigma (W -> mu nu)
The ratio of measured Z/gamma^* cross-sections in the electron and muon decay channels R_{Z/gamma^*} = sigma (Z/gamma^* -> e+ e-) / sigma (Z/gamma^* -> mu+ mu-)
Correlation coefficients among (W- -> l- nubar), (W+ -> l+ nu), (Z/gamma^* -> l+ l-) where (l = e, mu) excluding the common normalisation uncertainty due to the luminosity calibration.
This paper presents a measurement of forward-forward and forward-central dijet azimuthal angular correlations and conditional yields in proton-proton ($pp$) and proton-lead ($p$+Pb) collisions as a probe of the nuclear gluon density in regions where the fraction of the average momentum per nucleon carried by the parton entering the hard scattering is low. In these regions, gluon saturation can modify the rapidly increasing parton distribution function of the gluon. The analysis utilizes 25 pb$^{-1}$ of $pp$ data and 360 $\mu \mathrm{b}^{-1}$ of $p$+Pb data, both at $\sqrt{s_{\rm NN}}$ = 5.02 TeV, collected in 2015 and 2016, respectively, with the ATLAS detector at the LHC. The measurement is performed in the center-of-mass frame of the nucleon-nucleon system in the rapidity range between $-$4.0 and 4.0 using the two highest transverse momentum jets in each event, with the highest transverse momentum jet restricted to the forward rapidity range. No significant broadening of azimuthal angular correlations is observed for forward-forward or forward-central dijets in $p$+Pb compared to $pp$ collisions. For forward-forward jet pairs in the proton-going direction, the ratio of conditional yields in $p$+Pb collisions to those in $pp$ collisions is suppressed by approximately 20%, with no significant dependence on the transverse momentum of the dijet system. No modification of conditional yields is observed for forward-central dijets.
Unfolded azimuthal angular correlation distributions. Black markers represent p+Pb, red markers p+p
Unfolded width of azimuthal angular correlation distributions. Full markers represent p+Pb, open markers p+p
Unfolded Dijet conditional yields. Full markers represent p+Pb, open markers p+p
Ratio of unfolded width of azimuthal angular correlation distributions (P PB/ P P). Different colors correspond to different combinations of p_{T,1} and p_{T,2}
Ratio of unfolded Dijet conditional yields (P PB/ P P). Different colors correspond to different combinations of p_{T,1} and p_{T,2}
Unfolded width of azimuthal angular correlation distributions (Delta p_{T} > 3). Full markers represent p+Pb, open markers p+p
Unfolded Dijet conditional yields (Delta p_{T} > 3). Full markers represent p+Pb, open markers p+p
Ratio of unfolded width of azimuthal angular correlation distributions (P PB/ P P) (Delta p_{T} > 3). Different colors correspond to different combinations of p_{T,1} and p_{T,2}
Ratio of unfolded Dijet conditional yields (P PB/ P P) (Delta p_{T} > 3). Different colors correspond to different combinations of p_{T,1} and p_{T,2}
Unfolded azimuthal angular correlation distributions. Black markers represent p+Pb, red markers p+p
Unfolded azimuthal angular correlation distributions (Delta p_{T} > 3). Black markers represent p+Pb, red markers p+p
Jets created in association with a photon can be used as a calibrated probe to study energy loss in the medium created in nuclear collisions. Measurements of the transverse momentum balance between isolated photons and inclusive jets are presented using integrated luminosities of 0.49 nb$^{-1}$ of Pb+Pb collision data at $\sqrt{s_\mathrm{NN}}=5.02$ TeV and 25 pb$^{-1}$ of $pp$ collision data at $\sqrt{s}=5.02$ TeV recorded with the ATLAS detector at the LHC. Photons with transverse momentum $63.1 < p_\mathrm{T}^{\gamma} < 200$ GeV and $\left|\eta^{\gamma}\right| < 2.37$ are paired inclusively with all jets in the event that have $p_\mathrm{T}^\mathrm{jet} > 31.6$ GeV and pseudorapidity $\left|\eta^\mathrm{jet}\right| < 2.8$. The transverse momentum balance given by the jet-to-photon $p_\mathrm{T}$ ratio, $x_\mathrm{J\gamma}$, is measured for pairs with azimuthal opening angle $\Delta\phi > 7\pi/8$. Distributions of the per-photon jet yield as a function of $x_\mathrm{J\gamma}$, $(1/N_\gamma)(\mathrm{d}N/\mathrm{d}x_\mathrm{J\gamma})$, are corrected for detector effects via a two-dimensional unfolding procedure and reported at the particle level. In $pp$ collisions, the distributions are well described by Monte Carlo event generators. In Pb+Pb collisions, the $x_\mathrm{J\gamma}$ distribution is modified from that observed in $pp$ collisions with increasing centrality, consistent with the picture of parton energy loss in the hot nuclear medium. The data are compared with a suite of energy-loss models and calculations.
Photon-jet pT balance distributions (1/Ng)(dN/dxJg) in pp events (blue, reproduced on all panels) and Pb+Pb events (red) with each panel denoting a different centrality selection. These panels show results with pTg = 63.1-79.6 GeV. Total systematic uncertainties are shown as boxes, while statistical uncertainties are shown with vertical bars.
Photon-jet pT balance distributions (1/Ng)(dN/dxJg) in pp events (blue, reproduced on all panels) and Pb+Pb events (red) with each panel denoting a different centrality selection. These panels show results with pTg = 79.6-100 GeV. Total systematic uncertainties are shown as boxes, while statistical uncertainties are shown with vertical bars.
Photon-jet pT balance distributions (1/Ng)(dN/dxJg) in pp events (blue, reproduced on all panels) and Pb+Pb events (red) with each panel denoting a different centrality selection. These panels show results with pTg = 100-158 GeV. Total systematic uncertainties are shown as boxes, while statistical uncertainties are shown with vertical bars.
Photon-jet pT balance distributions (1/Ng)(dN/dxJg) in pp events (blue, reproduced on all panels) and Pb+Pb events (red) with each panel denoting a different centrality selection. These panels show results with pTg = 158-200 GeV. Total systematic uncertainties are shown as boxes, while statistical uncertainties are shown with vertical bars.
Selected comparisons of the nominal results in pp (blue) and 0-10% Pb+Pb (red) collisions with the central values obtained using a different photon-jet signal definition. Comparison of the nominal results (with DeltaPhi > 7pi/8) with those obtained using DeltaPhi > 3pi/4 for the pTg = 63.1-79.6 GeV range. Boxes indicate total systematic uncertainties, while vertical bars indicate statistical uncertainties.
Selected comparisons of the nominal results in pp (blue) and 0-10% Pb+Pb (red) collisions with the central values obtained using a different photon-jet signal definition. Comparison of the nominal results (inclusive jet selection) with those obtained using a photon-plus-leading-jet selection for the pTg = 100-158 GeV range. Boxes indicate total systematic uncertainties, while vertical bars indicate statistical uncertainties.
Measurements of the azimuthal anisotropy in lead-lead collisions at $\sqrt{s_\mathrm{NN}} = 5.02$ TeV are presented using a data sample corresponding to 0.49 $\mathrm{nb}^{-1}$ integrated luminosity collected by the ATLAS experiment at the LHC in 2015. The recorded minimum-bias sample is enhanced by triggers for "ultra-central" collisions, providing an opportunity to perform detailed study of flow harmonics in the regime where the initial state is dominated by fluctuations. The anisotropy of the charged-particle azimuthal angle distributions is characterized by the Fourier coefficients, $v_{2}-v_{7}$, which are measured using the two-particle correlation, scalar-product and event-plane methods. The goal of the paper is to provide measurements of the differential as well as integrated flow harmonics $v_{n}$ over wide ranges of the transverse momentum, 0.5 $
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V2{SP} over V2{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V3{SP} over V3{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V4{SP} over V4{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V5{SP} over V5{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V6{SP} over V6{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-15%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-25%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-35%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-45%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-55%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-15%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-25%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-35%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-45%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-55%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 0-5%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 10-15%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 20-25%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 30-35%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 40-45%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 50-55%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 0-5%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 10-15%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 20-25%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 30-35%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 40-45%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 50-55%
The PT scale factor for V2(PT) as a funtion of collision centrality
The PT scale factor for V3(PT) as a funtion of collision centrality
The V2 scale factor as a funtion of collision centrality
The V3 scale factor as a funtion of collision centrality
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
Correlations of two flow harmonics $v_n$ and $v_m$ via three- and four-particle cumulants are measured in 13 TeV $pp$, 5.02 TeV $p$+Pb, and 2.76 TeV peripheral Pb+Pb collisions with the ATLAS detector at the LHC. The goal is to understand the multi-particle nature of the long-range collective phenomenon in these collision systems. The large non-flow background from dijet production present in the standard cumulant method is suppressed using a method of subevent cumulants involving two, three and four subevents separated in pseudorapidity. The results show a negative correlation between $v_2$ and $v_3$ and a positive correlation between $v_2$ and $v_4$ for all collision systems and over the full multiplicity range. However, the magnitudes of the correlations are found to depend strongly on the event multiplicity, the choice of transverse momentum range and collision system. The relative correlation strength, obtained by normalisation of the cumulants with the $\langle v_n^2\rangle$ from a two-particle correlation analysis, is similar in the three collision systems and depends weakly on the event multiplicity and transverse momentum. These results based on the subevent methods provide strong evidence of a similar long-range multi-particle collectivity in $pp$, $p$+Pb and peripheral Pb+Pb collisions.
The symmetric cumulant $sc_{2,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The symmetric cumulant $sc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The symmetric cumulant $sc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The symmetric cumulant $sc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The symmetric cumulant $sc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The symmetric cumulant $sc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The symmetric cumulant $sc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The symmetric cumulant $sc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The symmetric cumulant $sc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The symmetric cumulant $sc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The symmetric cumulant $sc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The symmetric cumulant $sc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The asymmetric cumulant $ac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The asymmetric cumulant $ac_{2}\{3\}$results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The asymmetric cumulant $ac_{2}\{3\}$results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The asymmetric cumulant $ac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The asymmetric cumulant $ac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The asymmetric cumulant $ac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The normalized symmetric cumulant $nsc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The normalized symmetric cumulant $nsc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The normalized asymmetric cumulant $nac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The normalized symmetric cumulant $nsc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The normalized symmetric cumulant $nsc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The normalized asymmetric cumulant $nac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 13 TeV
The normalized symmetric cumulant $nsc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The normalized symmetric cumulant $nsc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The normalized asymmetric cumulant $nac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The normalized symmetric cumulant $nsc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The normalized symmetric cumulant $nsc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The normalized asymmetric cumulant $nac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The normalized symmetric cumulant $nsc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The normalized symmetric cumulant $nsc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The normalized asymmetric cumulant $nac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The normalized symmetric cumulant $nsc_{2\,3}\{4\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The normalized symmetric cumulant $nsc_{2\,4}\{4\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The normalized asymmetric cumulant $nac_{2}\{3\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The $v_{2}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The $v_{3}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The $v_{4}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The $v_{2}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The $v_{3}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The $v_{4}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The $v_{2}\{2\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The $v_{3}\{2\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The $v_{4}\{2\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The $v_{2}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The $v_{3}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The $v_{4}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pp collisions at $\sqrt{s_{NN}}$ = 13 TeV
The $v_{2}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The $v_{3}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The $v_{4}\{2\}$ results as a function of multiplicity ($N_{ch}$) in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
The $v_{2}\{2\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The $v_{3}\{2\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The $v_{4}\{2\}$ results as a function of multiplicity ($N_{ch}$) in PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV
The symmetric cumulant $ac_{2}\{3\}$ in Pb+Pb from different methods
The symmetric cumulant $ac_{2}\{3\}$ in Pb+Pb from different methods
The symmetric cumulant $ac_{2}\{3\}$ in p+Pb from different methods
The symmetric cumulant $ac_{2}\{3\}$ in p+Pb from different methods
The symmetric cumulant $ac_{2}\{3\}$ in pp from different methods
The symmetric cumulant $ac_{2}\{3\}$ in pp from different methods
Measurements of the yield and nuclear modification factor, $R_\mathrm{ AA}$, for inclusive jet production are performed using 0.49 nb$^{-1}$ of Pb+Pb data at $\sqrt{s_\mathrm{NN}} = 5.02$ TeV and 25 pb$^{-1}$ of $pp$ data at $\sqrt{s}=5.02$ TeV with the ATLAS detector at the LHC. Jets are reconstructed with the anti-$k_t$ algorithm with radius parameter $R=0.4$ and are measured over the transverse momentum range of 40-1000 GeV in six rapidity intervals covering $|y|<2.8$. The magnitude of $R_\mathrm{ AA}$ increases with increasing jet transverse momentum, reaching a value of approximately 0.6 at 1 TeV in the most central collisions. The magnitude of $R_\mathrm{ AA}$ also increases towards peripheral collisions. The value of $R_\mathrm{ AA}$ is independent of rapidity at low jet transverse momenta, but it is observed to decrease with increasing rapidity at high transverse momenta.
The ⟨TAA⟩ and ⟨Npart⟩ values and their uncertainties in each centrality bin.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
This paper presents a measurement of jet fragmentation functions in 0.49 nb$^{-1}$ of Pb+Pb collisions and 25 pb$^{-1}$ of $pp$ collisions at $\sqrt{s_{NN}} = 5.02$ TeV collected in 2015 with the ATLAS detector at the LHC. These measurements provide insight into the jet quenching process in the quark-gluon plasma created in the aftermath of ultra-relativistic collisions between two nuclei. The modifications to the jet fragmentation functions are quantified by dividing the measurements in Pb+Pb collisions by baseline measurements in $pp$ collisions. This ratio is studied as a function of the transverse momentum of the jet, the jet rapidity, and the centrality of the collision. In both collision systems, the jet fragmentation functions are measured for jets with transverse momentum between 126 GeV and 398 GeV and with an absolute value of jet rapidity less than 2.1. An enhancement of particles carrying a small fraction of the jet momentum is observed, which increases with centrality and with increasing jet transverse momentum. Yields of particles carrying a very large fraction of the jet momentum are also observed to be enhanced. Between these two enhancements of the fragmentation functions a suppression of particles carrying an intermediate fraction of the jet momentum is observed in Pb+Pb collisions. A small dependence of the modifications on jet rapidity is observed.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 398.10 < pTjet < 501.18 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 398.10 < pTjet < 501.18 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 398.10 < pTjet < 501.18 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 398.10 < pTjet < 501.18 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.
The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.
Excess transverse momenta in jet in PbPb compared to pp collisions in different centrality selections for abs(jet rapidity) < 2.1.
The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.
Excess particles in jet in PbPb compared to pp collisions in different centrality selections for abs(jet rapidity) < 2.1.
The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.
Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 126 < pTJet < 158.5 GeV.
The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.
Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 158.5 < pTJet < 199.5 GeV.
The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.
Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 199.5 < pTJet < 251.8 GeV.
Excess transverse momenta in jet in PbPb compared to pp collisions in different centrality selections for abs(jet rapidity) < 2.1.
Excess particles in jet in PbPb compared to pp collisions in different centrality selections for abs(jet rapidity) < 2.1.
Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 126 < pTJet < 158.5 GeV.
Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 158.5 < pTJet < 199.5 GeV.
Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 199.5 < pTJet < 251.8 GeV.
A measurement of $J/\psi$ and $\psi(2\mathrm{S})$ production is presented. It is based on a data sample from Pb+Pb collisions at $\sqrt{s_{\mathrm{NN}}}$ = 5.02 TeV and $pp$ collisions at $\sqrt{s}$ = 5.02 TeV recorded by the ATLAS detector at the LHC in 2015, corresponding to an integrated luminosity of $0.42\mathrm{nb}^{-1}$ and $25\mathrm{pb}^{-1}$ in Pb+Pb and $pp$, respectively. The measurements of per-event yields, nuclear modification factors, and non-prompt fractions are performed in the dimuon decay channel for $9 < p_{T}^{\mu\mu} < 40$ GeV in dimuon transverse momentum, and $-2.0 < y_{\mu\mu} < 2.0$ in rapidity. Strong suppression is found in Pb+Pb collisions for both prompt and non-prompt $J/\psi$, as well as for prompt and non-prompt $\psi(2\mathrm{S})$, increasing with event centrality. The suppression of prompt $\psi(2\mathrm{S})$ is observed to be stronger than that of $J/\psi$, while the suppression of non-prompt $\psi(2\mathrm{S})$ is equal to that of the non-prompt $J/\psi$ within uncertainties, consistent with the expectation that both arise from \textit{b}-quarks propagating through the medium. Despite prompt and non-prompt $J/\psi$ arising from different mechanisms, the dependence of their nuclear modification factors on centrality is found to be quite similar.
Per-event-yield of prompt jpsi production in 5.02 TeV PbPb collision data as a function of pT for three different centrality slices in the rapidity range |y| < 2.
Per-event-yield of non-prompt jpsi production in 5.02 TeV PbPb collision data as a function of pT for three different centrality slices in the rapidity range |y| < 2.
Non-prompt fraction of jpsi production in 5.02 TeV PbPb collision data as a function of pT for three different centrality slices in the rapidity range |y| < 2.
Non-prompt fraction of jpsi production in 5.02 TeV PbPb collision data as a function of pT for integrated centrality in the rapidity range |y| < 2.
The nuclear modification factor as a function of pT for the prompt jpsi for |y|<2, in 0--80% centrality bin.
The nuclear modification factor as a function of pT for the prompt jpsi for |y|<2, in 0--10%, 20--40%, and 40--80% centrality bin.
The nuclear modification factor as a function of pT for the non-prompt jpsi for |y|<2, in 0--80% centrality bin.
The nuclear modification factor as a function of pT for the non-prompt jpsi for |y|<2, in 0--10%, 20--40%, and 40--80% centrality bin.
The nuclear modification factor as a function of pT for the prompt and non-prompt jpsi for |y|<2, in 0--20% centrality bin.
The nuclear modification factor as a function of eta for the prompt jpsi for 9 < pT < 40 GeV, in 0--80% centrality bin.
The nuclear modification factor as a function of eta for the prompt jpsi for 9 < pT < 40 GeV, in 0--10%, 20--40%, and 40--80% centrality bin.
The nuclear modification factor as a function of eta for the non-prompt jpsi for 9 < pT < 40 GeV, in 0--80% centrality bin.
The nuclear modification factor as a function of eta for the non-prompt jpsi for 9 < pT < 40 GeV, in 0--10%, 20--40%, and 40--80% centrality bin.
The nuclear modification factor as a function of Npart for the prompt jpsi for |y|<2, and 9 < pT < 40 GeV
The nuclear modification factor as a function of Npart for the non-prompt jpsi for |y|<2, and 9 < pT < 40 GeV
The double ratio of nuclear modification factor as a function of Npart for the prompt jpsi and psi(2S) for |y|<2, and 9 < pT < 40 GeV
The double ratio nuclear modification factor as a function of Npart for the non-prompt jpsi and psi(2S) for |y|<2, and 9 < pT < 40 GeV
A detailed study of multi-particle azimuthal correlations is presented using $pp$ data at $\sqrt{s}=5.02$ and 13 TeV, and $p$+Pb data at $\sqrt{s_{\rm{NN}}}=5.02$ TeV, recorded with the ATLAS detector at the LHC. The azimuthal correlations are probed using four-particle cumulants $c_{n}\{4\}$ and flow coefficients $v_n\{4\}=(-c_{n}\{4\})^{1/4}$ for $n=2$ and 3, with the goal of extracting long-range multi-particle azimuthal correlation signals and suppressing the short-range correlations. The values of $c_{n}\{4\}$ are obtained as a function of the average number of charged particles per event, $\left\langle N_{\rm{ch}} \right\rangle$, using the recently proposed two-subevent and three-subevent cumulant methods, and compared with results obtained with the standard cumulant method. The three-subevent method is found to be least sensitive to short-range correlations, which originate mostly from jets with a positive contribution to $c_{n}\{4\}$. The three-subevent method gives a negative $c_{2}\{4\}$, and therefore a well-defined $v_2\{4\}$, nearly independent of $\left\langle N_{\rm{ch}} \right\rangle$, which provides direct evidence that the long-range multi-particle azimuthal correlations persist to events with low multiplicity. Furthermore, $v_2\{4\}$ is found to be smaller than the $v_2\{2\}$ measured using the two-particle correlation method, as expected for long-range collective behavior. Finally, the measured values of $v_2\{4\}$ and $v_2\{2\}$ are used to estimate the number of sources relevant for the initial eccentricity in the collision geometry.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.2 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.4 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.6 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.2 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.4 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.6 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.2 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.4 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.6 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.2 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.4 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.6 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.2 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.4 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.6 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.2 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.4 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.6 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 2-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 2-subevent cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 2-subevent cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 2-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 2-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the standard cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the standard cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.2 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.4 GeV.
The c_3{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.6 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.2 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.4 GeV.
The c_3{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for pT > 0.6 GeV.
The v_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The v_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The v_2{4} values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The v_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The v_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The v_2{4} values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The N_s calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The N_s values calculated for charged particles with 0.3 < pT < 3 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.3 < pT < 3 GeV.
The N_s values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 13 TeV pp data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
The N_s values calculated for charged particles with 0.5 < pT < 5 GeV with the 3-subevent cumulant method from the 5.02 TeV p+Pb data. The event averaging is performed for N_{ch}^{Sel} calculated for 0.5 < pT < 5 GeV.
Multi-particle cumulants and corresponding Fourier harmonics are measured for azimuthal angle distributions of charged particles in $pp$ collisions at $\sqrt{s}$ = 5.02 and 13 TeV and in $p$+Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV, and compared to the results obtained for low-multiplicity Pb+Pb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV. These measurements aim to assess the collective nature of particle production. The measurements of multi-particle cumulants confirm the evidence for collective phenomena in $p$+Pb and low-multiplicity Pb+Pb collisions. On the other hand, the $pp$ results for four-particle cumulants do not demonstrate collective behaviour, indicating that they may be biased by contributions from non-flow correlations. A comparison of multi-particle cumulants and derived Fourier harmonics across different collision systems is presented as a function of the charged-particle multiplicity. For a given multiplicity, the measured Fourier harmonics are largest in Pb+Pb, smaller in $p$+Pb and smallest in $pp$ collisions. The $pp$ results show no dependence on the collision energy, nor on the multiplicity.
$c_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $N_{ch}(p_T < 0.4 GeV)$ (EvSel_$N_{ch}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $N_{ch}(p_T < 0.4 GeV)$ (EvSel_$N_{ch}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $N_{ch}(p_T < 0.4 GeV)$ (EvSel_$N_{ch}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $N_{ch}(p_T < 0.4 GeV)$ (EvSel_$N_{ch}$) for PbPb collisions at $\sqrt{ s_{NN} }$=2.76 TeV.
$c_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{2, | \Delta \eta > 2 \}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_2\{2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_2\{2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_2\{2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{2, | \Delta \eta > 2 \}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{4\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_2\{6\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{6\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_2\{6\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{6\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_2\{8\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{8\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_2\{8\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_2\{8\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$v_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$v_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{2, | \Delta \eta > 2 \}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$v_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$v_2\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{2, | \Delta \eta > 2 \}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{6\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{8\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{4\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{6\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{8\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{4\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{6\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{8\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{4\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{6\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{8\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{4\}/v_2\{2, | \Delta \eta > 2 \}$ ratio for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{6\}/v_2\{4\}$ ratio for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{8\}/v_2\{6\}$ ratio for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{4\}/v_2\{2, | \Delta \eta > 2 \}$ ratio for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{6\}/v_2\{4\}$ ratio for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{8\}/v_2\{6\}$ ratio for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{4\}/v_2\{2, | \Delta \eta > 2 \}$ ratio for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{6\}/v_2\{4\}$ ratio for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{8\}/v_2\{6\}$ ratio for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_2\{4\}/v_2\{2, | \Delta \eta > 2 \}$ ratio for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{6\}/v_2\{4\}$ ratio for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_2\{8\}/v_2\{6\}$ ratio for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_3\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_3\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_3\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_3\{2, | \Delta \eta > 2 \}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_3\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_3\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_3\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_3\{2, | \Delta \eta > 2 \}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_4\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_4\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_4\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_4\{2, | \Delta \eta > 2 \}$ cumulants for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$c_4\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$c_4\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$c_4\{2, | \Delta \eta > 2\}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$c_4\{2, | \Delta \eta > 2 \}$ cumulants for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_3\{2, | \Delta \eta > 2\}$ harmonics for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$v_3\{2, | \Delta \eta > 2\}$ harmonics for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_3\{2, | \Delta \eta > 2 \}$ harmonics for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_3\{2, | \Delta \eta > 2\}$ harmonics for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_3\{2, | \Delta \eta > 2 \}$ harmonics for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_4\{2, | \Delta \eta > 2\}$ harmonics for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$v_4\{2, | \Delta \eta > 2\}$ harmonics for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$v_4\{2, | \Delta \eta > 2\}$ harmonics for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_4\{2, | \Delta \eta > 2 \}$ harmonics for reference particles with 0.3 $< p_T <$ 3.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$v_4\{2, | \Delta \eta > 2\}$ harmonics for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 5.02 TeV.
$v_4\{2, | \Delta \eta > 2\}$ harmonics for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pp collisions at $\sqrt{s}$= 13 TeV.
$v_4\{2, | \Delta \eta > 2\}$ harmonics for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for pPb collisions at $\sqrt{ s_{NN} }$= 5.02 TeV.
$v_4\{2, | \Delta \eta > 2 \}$ harmonics for reference particles with 0.5 $< p_T <$ 5.0 GeV selected according to $M_{ref}$ (EvSel_$M_{ref}$) for PbPb collisions at $\sqrt{ s_{NN} }$= 2.76 TeV.
$ v_2\{4\} $ harmonics for reference particles with 0.2 $ < p_{T} < $ 3.0 GeV as a function of $ < N_{ch}(|\eta|<1) > $ for p+Pb collisions at $ \sqrt{ s_{NN} } $= 5.02 TeV.
$ v_2\{4\} $ harmonics for reference particles with 0.2 $ < p_{T}< $ 3.0 GeV as a function of $ < N_{ch}(|\eta|<1) > $ for Pb+Pb collisions at $ \sqrt{ s_{NN} } $= 2.76 TeV.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.