Full experimental (statistical and systematic) correlations (in \%) of the normalized partial decay rates over the $\overline{B}^0\to D^{*+} e^- \bar\nu_e$ and $\overline{B}^0\to D^{*+} \mu^- \bar\nu_\mu$ decays.

Measured partial decay rates $\Delta\Gamma$ (in units of $10^{-15}$ GeV) using the matrix inversion unfolding method

Average of normalized decay rates that are determined using the matrix inversion unfolding method

Full experimental (statistical and systematic) correlations (in \%) of the partial decay rates determined with the matrix inversion unfolding method for the $\overline{B}^0\to D^{*+} e^- \bar\nu_e$ and $\overline{B}^0\to D^{*+} \mu^- \bar\nu_\mu$ decays.

Full experimental (statistical and systematic) correlations (in \%) of the normalized partial decay rates determined using the matrix inversion unfolding method

Expected and observed candidates for $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) as a function of the reduced mediator candidate mass.

Expected and observed candidates for $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) as a function of the reduced mediator candidate mass.

Expected and observed candidates for $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) as a function of the reduced mediator candidate mass.

Expected and observed candidates for $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) as a function of the reduced mediator candidate mass.

Expected and observed candidates for $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) as a function of the reduced mediator candidate mass.

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.001cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.003cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.005cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.007cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.01cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.025cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.05cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.1cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.25cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.5cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$1.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$2.5cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$5.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$10.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$25.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$50.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$100.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$200.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$400.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.001cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.003cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.005cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.007cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.01cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.025cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.05cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.1cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.25cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.5cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$1.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$2.5cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$5.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$10.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$25.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$50.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$100.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$200.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$400.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.001cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.003cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.005cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.007cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.01cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.025cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.05cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.1cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.25cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.5cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$1.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$2.5cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$5.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$10.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$25.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$50.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$100.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$200.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$400.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.001cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.003cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.005cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.007cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.01cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.025cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.05cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.1cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.25cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.5cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$1.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$2.5cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$5.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$10.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$25.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$50.0cm

Expected and observed limits on $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$100.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.001cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.003cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.005cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.007cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.01cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.025cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.05cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.1cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.25cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$0.5cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$1.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$2.5cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$5.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$10.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$25.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$50.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$100.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$200.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$) for a lifetime of $c\tau=$400.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.001cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.003cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.005cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.007cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.01cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.025cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.05cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.1cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.25cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$0.5cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$1.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$2.5cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$5.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$10.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$25.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$50.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$100.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$200.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$) for a lifetime of $c\tau=$400.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.001cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.003cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.005cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.007cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.01cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.025cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.05cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.1cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.25cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$0.5cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$1.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$2.5cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$5.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$10.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$25.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$50.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$100.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$200.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$) for a lifetime of $c\tau=$400.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.001cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.003cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.005cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.007cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.01cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.025cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.05cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.1cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.25cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$0.5cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$1.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$2.5cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$5.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$10.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$25.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$50.0cm

Expected and observed limits on $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$) for a lifetime of $c\tau=$100.0cm

Efficiencies for $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to e^+e^-$)

Efficiencies for $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$)

Efficiencies for $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$)

Efficiencies for $\mathcal{B}($$B^+\to K^+S$$) \times$ $\mathcal{B}($$S\to K^+K^-$)

Efficiencies for $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to e^+e^-$)

Efficiencies for $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \mu^+\mu^-$)

Efficiencies for $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to \pi^+\pi^-$)

Efficiencies for $\mathcal{B}($$B^0\to K^{*0}(\to K^+\pi^-)S$$) \times$ $\mathcal{B}($$S\to K^+K^-$)

Fit results of the simultaneous measurements of the $H\to e\tau$ and $H\to \mu\tau$ signals (2POI) showing best-fit values of the LFV branching ratios of the Higgs boson $\hat{B}$($H\to e\tau$). The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the simultaneous measurements of the $H\to e\tau$ and $H\to \mu\tau$ signals (2POI) showing upper limits at 95% C.L. on the LFV branching ratios of the Higgs boson $H\to \mu\tau$. The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the simultaneous measurements of the $H\to e\tau$ and $H\to \mu\tau$ signals (2POI) showing upper limits at 95% C.L. on the LFV branching ratios of the Higgs boson $H\to \mu\tau$. The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the simultaneous measurements of the $H\to e\tau$ and $H\to \mu\tau$ signals (2POI) showing best-fit values of the LFV branching ratios of the Higgs boson $\hat{B}$($H\to \mu\tau$). The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the simultaneous measurements of the $H\to e\tau$ and $H\to \mu\tau$ signals (2POI) showing best-fit values of the LFV branching ratios of the Higgs boson $\hat{B}$($H\to \mu\tau$). The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the independent searches (1 POI) showing upper limits at 95% C.L. on the LFV branching ratios of the Higgs boson $H\to e\tau$. The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the independent searches (1 POI) showing upper limits at 95% C.L. on the LFV branching ratios of the Higgs boson $H\to e\tau$. The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the independent searches (1 POI) showing best-fit values of the LFV branching ratios of the Higgs boson $\hat{B}$($H\to e\tau$). The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the independent searches (1 POI) showing best-fit values of the LFV branching ratios of the Higgs boson $\hat{B}$($H\to e\tau$). The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the independent searches (1 POI) showing upper limits at 95% C.L. on the LFV branching ratios of the Higgs boson $H\to \mu\tau$. The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the independent searches (1 POI) showing upper limits at 95% C.L. on the LFV branching ratios of the Higgs boson $H\to \mu\tau$. The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the independent searches (1 POI) showing best-fit values of the LFV branching ratios of the Higgs boson $\hat{B}$($H\to \mu\tau$). The results from standalone channel/categories fits are compared with the results of the combined fit.

Fit results of the independent searches (1 POI) showing best-fit values of the LFV branching ratios of the Higgs boson $\hat{B}$($H\to \mu\tau$). The results from standalone channel/categories fits are compared with the results of the combined fit.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{\ell'}$ channel for $e\tau_{\mu}$ final state in the non-VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{\ell'}$ channel for $e\tau_{\mu}$ final state in the non-VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{\ell'}$ channel for $\mu\tau_{e}$ final state in the non-VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{\ell'}$ channel for $\mu\tau_{e}$ final state in the non-VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{\ell'}$ channel for $e\tau_{\mu}$ final state in the VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{\ell'}$ channel for $e\tau_{\mu}$ final state in the VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{\ell'}$ channel for $\mu\tau_{e}$ final state in the VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{\ell'}$ channel for $\mu\tau_{e}$ final state in the VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{had}$ channel for $e\tau_{had}$ final state in the non-VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{had}$ channel for $e\tau_{had}$ final state in the non-VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{had}$ channel for $\mu\tau_{had}$ final state in the non-VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{had}$ channel for $\mu\tau_{had}$ final state in the non-VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{had}$ channel for $e\tau_{had}$ final state in the VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{had}$ channel for $e\tau_{had}$ final state in the VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{had}$ channel for $\mu\tau_{had}$ final state in the VBF category.

BDT score distribution, after the simultaneous fit of the $H\to e\tau$ and $H\to \mu\tau$ signals, obtained by fitting the data of the MC-template $\ell\tau_{had}$ channel for $\mu\tau_{had}$ final state in the VBF category.

NN score distribution, after an independent fit of the $H\to \mu\tau$ signal, obtained by fitting the data of the Symmetry $\ell\tau_{\ell'}$ channel, for the $\mu\tau_{e}$ final state in the non-VBF category.

NN score distribution, after an independent fit of the $H\to \mu\tau$ signal, obtained by fitting the data of the Symmetry $\ell\tau_{\ell'}$ channel, for the $\mu\tau_{e}$ final state in the non-VBF category.

NN score distribution, after an independent fit of the $H\to \mu\tau$ signal, obtained by fitting the data of the Symmetry $\ell\tau_{\ell'}$ channel, for the $\mu\tau_{e}$ final state in the VBF category.

NN score distribution, after an independent fit of the $H\to \mu\tau$ signal, obtained by fitting the data of the Symmetry $\ell\tau_{\ell'}$ channel, for the $\mu\tau_{e}$ final state in the VBF category.

Best-fit $\mathcal{B}(H\to \mu\tau)- \mathcal{B}(H\to e\tau)$ values, given in %, obtained from the standalone fits of the $\ell\tau_\ell'$ final state with either background estimation method. For the MC-template method, the correlated uncertainties are fixed to their best-fit values and the uncertainties are re-derived considering only the uncorrelated sources. For the Symmetry method, the full uncertainty is considered.

Best-fit $\mathcal{B}(H\to \mu\tau)- \mathcal{B}(H\to e\tau)$ values, given in %, obtained from the standalone fits of the $\ell\tau_\ell'$ final state with either background estimation method. For the MC-template method, the correlated uncertainties are fixed to their best-fit values and the uncertainties are re-derived considering only the uncorrelated sources. For the Symmetry method, the full uncertainty is considered.

Best-fit value of the branching ratios $\mathcal{B}(H\to e\tau)$ and $\mathcal{B}(H\to \mu\tau)$, given in %, and likelihood contours at 68% and 95% C.L. Obtained from the simultaneous fit of $H\to e\tau$ and $H\to \mu\tau$ signals based on the MC-template method, compared to the SM expectation.

Best-fit value of the branching ratios $\mathcal{B}(H\to e\tau)$ and $\mathcal{B}(H\to \mu\tau)$, given in %, and likelihood contours at 68% and 95% C.L. Obtained from the simultaneous fit of $H\to e\tau$ and $H\to \mu\tau$ signals based on the MC-template method, compared to the SM expectation.

The performance of jet energy resolution (JER) for jets with |y| < 2.1 evaluated as a function of pT_truth in different centrality bins. Simulated hard scatter events were overlaid onto events from a dedicated sample of minimum-bias Xe+Xe data. The fit parameters are listed in a sperate table (Extras 1)

The relative magnitude of systematic uncertainties for per-pair normalized xJ distributions in 0-10% Xe+Xe centrality

The relative magnitude of systematic uncertainties for absolutely normalized xJ distributions in 0-10% Xe+Xe centrality

The relative magnitude of systematic uncertainties for rho distributions for leading jets in 0-10% Xe+Xe centrality

Per-pair normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.

Per-pair normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.

Per-pair normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.

Absolutely normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.

Absolutely normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.

Absolutely normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.

Per-pair normalized xJ distribution in Xe+Xe collisions.

Per-pair normalized xJ distribution in Pb+Pb collisions.

Per-pair normalized xJ distribution in Xe+Xe collisions.

Per-pair normalized xJ distribution in Pb+Pb collisions.

Per-pair normalized xJ distribution in Xe+Xe collisions.

Per-pair normalized xJ distribution in Pb+Pb collisions.

Absolutely normalized xJ distribution in Xe+Xe collisions.

Absolutely normalized xJ distribution in Xe+Xe collisions.

Absolutely normalized xJ distribution in Xe+Xe collisions.

Absolutely normalized xJ distribution in Xe+Xe collisions.

Absolutely normalized xJ distribution in Xe+Xe collisions.

Absolutely normalized xJ distribution in Xe+Xe collisions.

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same centrality intervals.

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same centrality intervals.

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same centrality intervals.

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same centrality intervals.

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same centrality intervals.

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same centrality intervals.

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)

The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)

Parameter a,b, and c from JER fits in Figure 1b.

Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.

Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.

Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.

Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.

Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.

Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.

Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.

Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.

Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for observed data events

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for expected signal events in the strong gluino pair pair production model with m(gluino)=1.8 TeV, m(chi0)=0.2 TeV, tau(chi0)=0.1 ns

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for observed data events

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for expected signal events in the electroweak pair production model

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Exclusion limits at 95% CL on the production cross section in the electroweak pair production model.

Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m(gluino)=2.4 TeV

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m($ ilde{\chi}^0_1$)=1.25 TeV

Acceptance cutflow for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.

Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.

Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.

Acceptance cutflow for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.

Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R < 1150 mm

Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R [1150, 3870] mm

Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R > 3870 mm

Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R < 1150 mm

Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R [1150, 3870] mm

Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R > 3870 mm

Reinterpretation Material: Vertex-level Efficiency for R < 22 mm

Reinterpretation Material: Vertex-level Efficiency for R [22, 25] mm

Reinterpretation Material: Vertex-level Efficiency for R [25, 29] mm

Reinterpretation Material: Vertex-level Efficiency for R [29, 38] mm

Reinterpretation Material: Vertex-level Efficiency for R [38, 46] mm

Reinterpretation Material: Vertex-level Efficiency for R [46, 73] mm

Reinterpretation Material: Vertex-level Efficiency for R [73, 84] mm

Reinterpretation Material: Vertex-level Efficiency for R [84, 111] mm

Reinterpretation Material: Vertex-level Efficiency for R [111, 120] mm

Reinterpretation Material: Vertex-level Efficiency for R [120, 145] mm

Reinterpretation Material: Vertex-level Efficiency for R [145, 180] mm

Reinterpretation Material: Vertex-level Efficiency for R [180, 300] mm

Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.

Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.

Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.

Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.

Comparison between data and background prediction before the fit (Pre-Fit) for the mass of the FCNC top-quark candidate in SR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The four FCNC LH signals are also shown separately, normalized to five times the cross-section corresponding to the most stringent observed branching ratio limits. The first (last) bin in all distributions includes the underflow (overflow). The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction before the fit (Pre-Fit) for the mass of the SM top-quark candidate in SR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The four FCNC LH signals are also shown separately, normalized to five times the cross-section corresponding to the most stringent observed branching ratio limits. The first (last) bin in all distributions includes the underflow (overflow). The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction before the fit (Pre-Fit) for the transverse momentum of the Z boson candidate in SR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The four FCNC LH signals are also shown separately, normalized to five times the cross-section corresponding to the most stringent observed branching ratio limits. The first (last) bin in all distributions includes the underflow (overflow). The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{1}$ discriminant in the mass sideband CR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also separately shown, normalized to 500 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{2}^{u}$ discriminant in the mass sideband CR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also separately shown, normalized to 500 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{1}$ discriminant in SR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also separately shown, normalized to 50 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{2}^{u}$ discriminant in SR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also separately shown, normalized to 50 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZc LH coupling extraction. The distribution is for the $D_{1}$ discriminant in the mass sideband CR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZc LH signals are also separately shown, normalized to 500 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZc LH coupling extraction. The distribution is for the $D_{2}^{c}$ discriminant in the mass sideband CR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZc LH signals are also separately shown, normalized to 500 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZc LH coupling extraction. The distribution is for the $D_{1}$ discriminant in SR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZc LH signals are also separately shown, normalized to 50 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZc LH coupling extraction. The distribution is for the $D_{2}^{c}$ discriminant in SR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZc LH signals are also separately shown, normalized to 50 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the leading lepton $p_{T}$ in the $t\bar{t}$ CR. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also shown separately, normalized to $10^{3}$ times the best fit of the signal yield. The last bin includes the overflow. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the third lepton $p_{T}$ in the $t\bar{t}$ CR. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also shown separately, normalized to $10^{3}$ times the best fit of the signal yield. The last bin includes the overflow. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the leading lepton $p_{T}$ in the $t\bar{t}Z$ CR. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also shown separately, normalized to $10^{3}$ times the best fit of the signal yield. The last bin includes the overflow. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{1}$ discriminant in the $t\bar{t}Z$ CR. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also shown separately, normalized to $10^{3}$ times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).

The $Z'$ signal event selection efficiencies compared to the events passing the previous cut level for several representative mass points. The overall signal efficiencies are the products of the 4$\mu$ MC filter and the combined event selection efficiencies.

The selected 4$\mu$ events in data and the estimated backgrounds and their combined statistical and systematic uncertainties.

The selected 4$\mu$ events in data and the estimated backgrounds and their combined statistical and systematic uncertainties.

Distributions of $p_{T}^{Z_1}$. Small background contributions are denoted as "other backgrounds", including 4$\mu$ events containing non-prompt muons estimated from data and from $ttV$, $VVV$, and Higgs boson production processes.

Distributions of $p_{T}^{Z_1}$. Small background contributions are denoted as "other backgrounds", including 4$\mu$ events containing non-prompt muons estimated from data and from $ttV$, $VVV$, and Higgs boson production processes.

Distributions of $p_{T}^{Z_2}$. Small background contributions are denoted as "other backgrounds", including 4$\mu$ events containing non-prompt muons estimated from data and from $ttV$, $VVV$, and Higgs boson production processes.

Distributions of $p_{T}^{Z_2}$. Small background contributions are denoted as "other backgrounds", including 4$\mu$ events containing non-prompt muons estimated from data and from $ttV$, $VVV$, and Higgs boson production processes.

Distributions of the mass difference of the $Z_1$ and $Z_2$ candidates. Small background contributions are denoted as "other backgrounds", including 4$\mu$ events containing non-prompt muons estimated from data and from $ttV$, $VVV$, and Higgs boson production processes.

Distributions of the mass difference of the $Z_1$ and $Z_2$ candidates. Small background contributions are denoted as "other backgrounds", including 4$\mu$ events containing non-prompt muons estimated from data and from $ttV$, $VVV$, and Higgs boson production processes.

The pDNN output discriminant variable distributions for low mass with a signal sample at 35 GeV and 51 GeV, respectively.

The pDNN output discriminant variable distributions for low mass with a signal sample at 35 GeV and 51 GeV, respectively.

The pDNN output discriminant variable distributions for high mass with a signal sample at 35 GeV and 51 GeV, respectively.

The pDNN output discriminant variable distributions for high mass with a signal sample at 35 GeV and 51 GeV, respectively.

Mass spectra of $m_{Z2}$ for the pDNN-selected events with a signal sample at 15 GeV.

Mass spectra of $m_{Z2}$ for the pDNN-selected events with a signal sample at 15 GeV.

Mass spectra of $m_{Z1}$ for the pDNN-selected events with a signal sample at 51 GeV.

Mass spectra of $m_{Z1}$ for the pDNN-selected events with a signal sample at 51 GeV.

The $p_0$-value scan across the Z' mass signal regions.

The $p_0$-value scan across the Z' mass signal regions.

95% CL upper limits (expected and observed) on the cross-sections times branching fraction. The discontinuity at 42 GeV represents the border of the low/high mass classifiers.

95% CL upper limits (expected and observed) on the cross-sections times branching fraction. The discontinuity at 42 GeV represents the border of the low/high mass classifiers.

95% CL upper limits (expected and observed) on the coupling parameter. The discontinuity at 42 GeV represents the border of the low/high mass classifiers.

95% CL upper limits (expected and observed) on the coupling parameter. The discontinuity at 42 GeV represents the border of the low/high mass classifiers.

The parameterized mass resolution $\sigma_{m_{\mu\mu}}$ as a function of $m_{Z'}$ using fully simulated $Z' \rightarrow \mu^+\mu^-$ events.

The parameterized mass resolution $\sigma_{m_{\mu\mu}}$ as a function of $m_{Z'}$ using fully simulated $Z' \rightarrow \mu^+\mu^-$ events.

The transverse momentum $p_{T}$ distributions for each muon (ordered with $p_{T}$ from (a) to (d)). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

The transverse momentum $p_{T}$ distributions for each muon (ordered with $p_{T}$ from (a) to (d)). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

The transverse momentum $p_{T}$ distributions for each muon (ordered with $p_{T}$ from (a) to (d)). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

The transverse momentum $p_{T}$ distributions for each muon (ordered with $p_{T}$ from (a) to (d)). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

The transverse momentum $p_{T}$ distributions for each muon (ordered with $p_{T}$ from (a) to (d)). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

The transverse momentum $p_{T}$ distributions for each muon (ordered with $p_{T}$ from (a) to (d)). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

The transverse momentum $p_{T}$ distributions for each muon (ordered with $p_{T}$ from (a) to (d)). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

The transverse momentum $p_{T}$ distributions for each muon (ordered with $p_{T}$ from (a) to (d)). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. The plots (a) to (d) are the $\eta$ distributions of the 4 muons ($p_{T}$ ordered). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. The plots (a) to (d) are the $\eta$ distributions of the 4 muons ($p_{T}$ ordered). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. The plots (a) to (d) are the $\eta$ distributions of the 4 muons ($p_{T}$ ordered). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. The plots (a) to (d) are the $\eta$ distributions of the 4 muons ($p_{T}$ ordered). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. The plots (a) to (d) are the $\eta$ distributions of the 4 muons ($p_{T}$ ordered). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. The plots (a) to (d) are the $\eta$ distributions of the 4 muons ($p_{T}$ ordered). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. The plots (a) to (d) are the $\eta$ distributions of the 4 muons ($p_{T}$ ordered). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. The plots (a) to (d) are the $\eta$ distributions of the 4 muons ($p_{T}$ ordered). In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. Plots (a) to (d) are the angular separations, $\Delta R$ of the two muons that formed $Z_1$ and $Z_2$, and the mass distributions of $Z_1$ and $Z_2$. In addition to the major backgrounds from the SM $Z(Z^*)\rightarrow 4\mu$ production, other background, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. Plots (a) to (d) are the angular separations, $\Delta R$ of the two muons that formed $Z_1$ and $Z_2$, and the mass distributions of $Z_1$ and $Z_2$. In addition to the major backgrounds from the SM $Z(Z^*)\rightarrow 4\mu$ production, other background, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. Plots (a) to (d) are the angular separations, $\Delta R$ of the two muons that formed $Z_1$ and $Z_2$, and the mass distributions of $Z_1$ and $Z_2$. In addition to the major backgrounds from the SM $Z(Z^*)\rightarrow 4\mu$ production, other background, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. Plots (a) to (d) are the angular separations, $\Delta R$ of the two muons that formed $Z_1$ and $Z_2$, and the mass distributions of $Z_1$ and $Z_2$. In addition to the major backgrounds from the SM $Z(Z^*)\rightarrow 4\mu$ production, other background, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. Plots (a) to (d) are the angular separations, $\Delta R$ of the two muons that formed $Z_1$ and $Z_2$, and the mass distributions of $Z_1$ and $Z_2$. In addition to the major backgrounds from the SM $Z(Z^*)\rightarrow 4\mu$ production, other background, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. Plots (a) to (d) are the angular separations, $\Delta R$ of the two muons that formed $Z_1$ and $Z_2$, and the mass distributions of $Z_1$ and $Z_2$. In addition to the major backgrounds from the SM $Z(Z^*)\rightarrow 4\mu$ production, other background, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. Plots (a) to (d) are the angular separations, $\Delta R$ of the two muons that formed $Z_1$ and $Z_2$, and the mass distributions of $Z_1$ and $Z_2$. In addition to the major backgrounds from the SM $Z(Z^*)\rightarrow 4\mu$ production, other background, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Kinematic distributions of the pre-selected $4\mu$ events. Plots (a) to (d) are the angular separations, $\Delta R$ of the two muons that formed $Z_1$ and $Z_2$, and the mass distributions of $Z_1$ and $Z_2$. In addition to the major backgrounds from the SM $Z(Z^*)\rightarrow 4\mu$ production, other background, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Data and MC comparison of the $Z \to 4\mu$ invariant mass using pre-selected 4$\mu$ events. Figure (b) shows the distribution between 80 GeV~and 110 GeV~in Figure (a). Figure (c) shows the distribution of transverse momentum of $4\mu$ system. In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Data and MC comparison of the $Z \to 4\mu$ invariant mass using pre-selected 4$\mu$ events. Figure (b) shows the distribution between 80 GeV~and 110 GeV~in Figure (a). Figure (c) shows the distribution of transverse momentum of $4\mu$ system. In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Data and MC comparison of the $Z \to 4\mu$ invariant mass using pre-selected 4$\mu$ events. Figure (b) shows the distribution between 80 GeV~and 110 GeV~in Figure (a). Figure (c) shows the distribution of transverse momentum of $4\mu$ system. In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Data and MC comparison of the $Z \to 4\mu$ invariant mass using pre-selected 4$\mu$ events. Figure (b) shows the distribution between 80 GeV~and 110 GeV~in Figure (a). Figure (c) shows the distribution of transverse momentum of $4\mu$ system. In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Data and MC comparison of the $Z \to 4\mu$ invariant mass using pre-selected 4$\mu$ events. Figure (b) shows the distribution between 80 GeV~and 110 GeV~in Figure (a). Figure (c) shows the distribution of transverse momentum of $4\mu$ system. In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Data and MC comparison of the $Z \to 4\mu$ invariant mass using pre-selected 4$\mu$ events. Figure (b) shows the distribution between 80 GeV~and 110 GeV~in Figure (a). Figure (c) shows the distribution of transverse momentum of $4\mu$ system. In addition to the major background from the SM $Z(Z^*)\rightarrow 4\mu$ production, other backgrounds, including 4$\mu$ events containing non-prompt muons estimated from data, and from $ttV$, $VVV$, and Higgs boson production processes, are included in the plots. Examples of the Z' signal from $pp\rightarrow Z'\mu^+\mu^- \rightarrow 4\mu$ process with masses of 15 and 51 GeV are also shown in the plots.

Event yields of the signal and SM background processes in the six analysis regions after the fit to the data under the $t \rightarrow uX$ hypothesis assuming $m_X = 30$ GeV. Total includes signal and background.The quoted uncertainties take into account correlations and constraints of the nuisance parameters and include both the statistical and systematic uncertainties. Negative correlations between the $t\bar{t} +$ light, $t\bar{t} + \geq1b$ and $t\bar{t} + \geq1c$ modelling uncertainties can make the uncertainty in the total yields smaller than in the individual components.

Event yields of the signal and SM background processes in the six analysis regions after the fit to the data under the $t \rightarrow cX$ hypothesis assuming $m_X = 30$ GeV. Total includes signal and background.The quoted uncertainties take into account correlations and constraints of the nuisance parameters and include both the statistical and systematic uncertainties. Negative correlations between the $t\bar{t} +$ light, $t\bar{t} + \geq1b$ and $t\bar{t} + \geq1c$ modelling uncertainties can make the uncertainty in the total yields smaller than in the individual components.

Event acceptance times efficiency in percent for every $t\rightarrow uX$ and $t\rightarrow cX$ mass signal sample.

Cut flow for the scalar signal in the $t\rightarrow uX$ decay combining both quark and anti-quark samples. Shown for each signal are the corresponding mass, the number of generated events, the number of reconstructed ("Reco") events, the events that pass the lepton triggers, the events that have only one electron ("el") or only one muon ("mu") with p$_{\text{T}}$ larger than 27 GeV, the number of events with at least four jets with p$_{\text{T}}$ larger than 25 GeV, the number of events with at least three $b$-tagged jets at the 70% efficiency working point, and the number of events with at least two $b$-tagged jets at the 60% efficiency working point and at least another one at the 70%. The quoted yields do not include reweighting.

Cut flow for the scalar signal in the $t\rightarrow cX$ decay combining both quark and anti-quark samples. Shown for each signal are the corresponding mass, the number of generated events, the number of reconstructed ("Reco") events, the events that pass the lepton triggers, the events that have only one electron ("el") or only one muon ("mu") with p$_{\text{T}}$ larger than 27 GeV, the number of events with at least four jets with p$_{\text{T}}$ larger than 25 GeV, the number of events with at least three $b$-tagged jets at the 70% efficiency working point, and the number of events with at least two $b$-tagged jets at the 60% efficiency working point and at least another one at the 70%. The quoted yields do not include reweighting.

Normalisation factors for the major background processes and ttW ($\Delta \eta < 0$) from the fit using only statistical uncertainties (fixing Nuisance Parameters (NP) to their fitted values) to data in all analysis regions.

Normalisation factors for the major background processes and ttW ($\Delta \eta < 0$) from the fit using using both statistical and systematic uncertainties to data in all analysis regions.

Correlation matrix between the Normalisation Factors in the fit using only statistical uncertainties (fixing Nuisance Parameters (NP) to their fitted values) to data in all analysis regions.

The most relevant systematic uncertainties ranked by their impact on the leptonic charge asymmetry ($A_c^{\ell}$) parameter at reconstructed level. The impact of the uncertainties is shown before and after the combined profile-likelihood fit to data in the signal and control regions. Pulls introduced by the fitting procedure are also shown. The entries shown in bold are the uncertainties of the freely floating background normalisations. ME stands for "matrix element", PS for "parton shower" and JER for "jet energy resolution". The gamma-uncertainties refer to the MC statistical uncertainties in a specific region and bin.

The most relevant systematic uncertainties ranked by their impact on the ttW Normalisation Factor ($\Delta \eta < 0$) parameter at reconstructed level. The impact of the uncertainties is shown before and after the combined profile-likelihood fit to data in the signal and control regions. Pulls introduced by the fitting procedure are also shown. ME stands for "matrix element", PS for "parton shower" and JER for "jet energy resolution". The gamma-uncertainties refer to the MC statistical uncertainties in a specific region and bin.

The predicted and observed numbers of events in the control and signal regions. The predictions are shown before the fit to data. The indicated uncertainties consider statistical as well as all experimental and theoretical systematic uncertainties. Background categories with event yields with a value of 1.0e-6 have a negligible contribution to the region and are manually set to that value.

The predicted and observed numbers of events in the control and signal regions. The predictions are shown after the fit to data. The indicated uncertainties consider statistical as well as all experimental and theoretical systematic uncertainties. Background categories with event yields with a value of 1.0e-6 have a negligible contribution to the region and are manually set to that value.

Electron $p_{T}$ distribution using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

$p_{T}^{miss}$ distribution in the electron channel using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

Muon $p_T$ distribution using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

$p_T^{miss}$ distribution in the muon channel using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

$M_T$ distribution for the E+INVISIBLE system using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

$M_T$ distribution for the MU+INVISIBLE system using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

Theoretical prediction for the production and decay cross-section of SSM WPRIME bosons (W --> LEPTON + NU) as a function of the WPRIME mass, for the range 200-6400 GeV and inclusive in phase-space (no cuts). The uncertainty shown covers PDF and ALPHAS uncertainties. These theoretical predictions are obtained with PYTHIA (LO) and corrected to NNLO in QCD using FEWZ program.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the product of WPRIME cross-section production and BF(WPRIME --> LEPTON + NU) for an SSM WPRIME boson, as a function of the boson mass, for the electron decay channel. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits. The theoretical predictions for the SSM at NNLO precision in QCD are shown with narrow gray bands corresponding to the PDF and ALPHAS uncertainties.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the product of WPRIME cross-section production and BF(WPRIME --> LEPTON + NU) for an SSM WPRIME boson, as a function of the boson mass, for the muon decay channel. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits. The theoretical predictions for the SSM at NNLO precision in QCD are shown with narrow gray bands corresponding to the PDF and ALPHAS uncertainties.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the product of WPRIME cross-section production and BF(WPRIME --> LEPTON + NU) for an SSM WPRIME boson, as a function of the boson mass, for the combined electron and muon decay channels. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits. The theoretical predictions for the SSM at NNLO precision in QCD are shown with narrow gray bands corresponding to the PDF and ALPHAS uncertainties.

The 95% CL observed (solid line) and expected (dashed line) model independent cross section upper limits as function of the $MT_{min}$ threshold, for the electron decay channel. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits.

The 95% CL observed (solid line) and expected (dashed line) model independent cross section upper limits as function of the $MT_{min}$ threshold, for the muon decay channel. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits.

The 95% CL observed (solid line) and expected (dashed line) model independent cross section upper limits as function of the $MT_{min}$ threshold, for the combined electron and muon decay channels. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the coupling strength ratio, gWprime/gW as a function of the mass of the WPRIME boson, for the electron channel. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The area above the limit curve is excluded. The dotted line represents the case of SSM coupling, gWprime, being equal to gW, the SM coupling.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the coupling strength ratio, gWprime/gW, as a function of the mass of the WPRIME boson, for the muon channel. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The area above the limit curve is excluded. The dotted line represents the case of SSM coupling, gWprime , being equal to gW, the SM coupling.

Exclusion limits in the 2D plane (1/R, $\mu$) for the split-UED interpretation for the n = 2 case, for the electron channel for the 2016-2018 data sets. R is the radius of the additional spatial dimension and $\mu$ the bulk mass for the fermion field in five dimensions. The expected limit is depicted as a black dashed line. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The experimentally excluded region is the entire area to the left of the solid black line.

Exclusion limits in the 2D plane (1/R, $\mu$) for the split-UED interpretation for the n = 2 case, for the muon channel for the 2016-2018 data sets. R is the radius of the additional spatial dimension and $\mu$ the bulk mass for the fermion field in five dimensions. The expected limit is depicted as a black dashed line. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The experimentally excluded region is the entire area to the left of the solid black line.

Exclusion limits in the 2D plane (1/R, $\mu$) for the split-UED interpretation for the n = 2 case, for the combined electron and muon channels for the 2016-2018 data sets. R is the radius of the additional spatial dimension and $\mu$ the bulk mass for the fermion field in five dimensions. The expected limit is depicted as a black dashed line. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The experimentally excluded region is the entire area to the left of the solid black line.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the ${\lambda}_{231}$ coupling in the RPV SUSY model with a STAU mediator, as a function of the mass of STAU, for the electron channel and for the production coupling, ${\lambda}^{'}_{3ij}$=0.5 . The couplings ${\lambda}^{'}_{3ij}$, ${\lambda}_{231}$, and ${\lambda}_{132}$ are defined in Fig. 1. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The area above the limit curve is excluded. Limits for other values of ${\lambda}^{'}_{3ij}$ are obtained multiplying the ones shown by the ratio ${\lambda}^{'}_{3ij}$/0.5

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the ${\lambda}_{132}$ coupling in the RPV SUSY model with a stau mediator, as a function of the mass of the stau, for the muon channel and for the production coupling, ${\lambda}^{'}_{3ij}$ = 0.5 . The couplings ${\lambda}^{'}_{3ij}$, ${\lambda}_{231}$, and ${\lambda}_{132}$ are defined in Fig. 1. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The area above the limit curve is excluded. Limits for other values of ${\lambda}^{'}_{3ij}$ are obtained multiplying these ones by the ratio ${\lambda}^{'}_{3ij}$/0.5

Region in the oblique (W,Y) parameter phase space allowed by the current analysis at 95% CL. The combination of the electron and muon channel distributions from the 2017 and 2018 data sets at sqrt(s) = 13 TeV is used, having 101 fb-1 of luminosity.

Negative Log-Likelihood for the determination of the oblique W parameter, for the combination of the electron and muon channel and for 2017 and 2018 data sets (L=101 fb-1) at sqrt(s) = 13 TeV.

Total background estimate and observed data in all bins used in the limit calculation for the SSM WPRIME limits. The total event sample is split into the three years of data taking and the two lepton flavors.The distributions being shown are $M_T$ ones. The associated integrated luminosities for each year are of 35.9, 41.5, and 59.4 fb$̣^{-1}. The mass bins are numbered in ascending order.

Measured differential cross section as a function of observable $ p_{T}^{ll} - p_{T}^{\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll} + p_{T}^{\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll} + p_{T}^{\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ \Delta R (l,l)$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ \Delta R (l,l)$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ N_{jets}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ N_{jets}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{Jet1}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{Jet1}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{Jet2}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{Jet2}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{Jet2}/p_{T}^{Jet1}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{Jet2}/p_{T}^{Jet1}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ m_{jj}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ m_{jj}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ m_{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ m_{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ H_{T}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ H_{T}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{\gamma} / \sqrt{H_{T}}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{\gamma} / \sqrt{H_{T}}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ \Delta \phi (Jet,\gamma)$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ \Delta \phi (Jet,\gamma)$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ \phi_{CS}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ \phi_{CS}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ \cos \theta_{CS}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ \cos \theta_{CS}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma} / m_{ll\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma} / m_{ll\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma} / m_{ll\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma} / m_{ll\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma} / m_{ll\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma} / m_{ll\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll} - p_{T}^{\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll} - p_{T}^{\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll} - p_{T}^{\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll} - p_{T}^{\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll} - p_{T}^{\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll} - p_{T}^{\gamma}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Measured differential cross section as a function of observable $ p_{T}^{ll\gamma j}$. Error on the measured cross-section include all the systematic uncertainties. SM predictions are produced with the event generators at particle level: Sherpa 2.2.4, Sherpa 2.2.11, MadGraph5_aMC@NLO, and MiNNLO$_{PS}$. Fixed order calculations results use MATRIX NNLO. Error represent statistical uncertainty and theoretical uncertainty (PDF and Scale variations).

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{\gamma} / \sqrt{H_{T}}$ (Fig. 8 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{\gamma} / \sqrt{H_{T}}$ (Fig. 8 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ H_{T}$ (Fig. 8 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ H_{T}$ (Fig. 8 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ \Delta \phi (Jet,\gamma)$ (Fig. 8 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ \Delta \phi (Jet,\gamma)$ (Fig. 8 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ \Delta R (l,l)$ (Fig. 5 (d))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ \Delta R (l,l)$ (Fig. 5 (d))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} - p_{T}^{\gamma}$ (Fig. 5 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} - p_{T}^{\gamma}$ (Fig. 5 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} - p_{T}^{\gamma} \textrm{ in bin } p_{T}^{ll} + p_{T}^{\gamma} < 200 GeV$ (Fig. 11 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} - p_{T}^{\gamma} \textrm{ in bin } p_{T}^{ll} + p_{T}^{\gamma} < 200 GeV$ (Fig. 11 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} - p_{T}^{\gamma} \textrm{ in bin } 200 GeV < p_{T}^{ll} + p_{T}^{\gamma} < 300 GeV$ (Fig. 11 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} - p_{T}^{\gamma} \textrm{ in bin } 200 GeV < p_{T}^{ll} + p_{T}^{\gamma} < 300 GeV$ (Fig. 11 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} - p_{T}^{\gamma} \textrm{ in bin } p_{T}^{ll} + p_{T}^{\gamma} > 300 GeV$ (Fig. 11 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} - p_{T}^{\gamma} \textrm{ in bin } p_{T}^{ll} + p_{T}^{\gamma} > 300 GeV$ (Fig. 11 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ m_{jj}$ (Fig. 7 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ m_{jj}$ (Fig. 7 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ m_{ll\gamma j}$ (Fig. 7 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ m_{ll\gamma j}$ (Fig. 7 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ N_{jets}$ (Fig. 6 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ N_{jets}$ (Fig. 6 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{Jet1}$ (Fig. 6 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{Jet1}$ (Fig. 6 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{Jet2}$ (Fig. 6 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{Jet2}$ (Fig. 6 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{Jet2}/p_{T}^{Jet1}$ (Fig. 6 (d))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{Jet2}/p_{T}^{Jet1}$ (Fig. 6 (d))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll}$ (Fig. 5 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll}$ (Fig. 5 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma j}$ (Fig. 8 (d))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma j}$ (Fig. 8 (d))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma j} \textrm{ in bin } p_{T}^{ll\gamma} < 50 GeV$ (Fig. 12 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma j} \textrm{ in bin } p_{T}^{ll\gamma} < 50 GeV$ (Fig. 12 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma j} \textrm{ in bin } 50 GeV < p_{T}^{ll\gamma} < 75 GeV$ (Fig. 12 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma j} \textrm{ in bin } 50 GeV < p_{T}^{ll\gamma} < 75 GeV$ (Fig. 12 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma j} \textrm{ in bin } p_{T}^{ll\gamma} > 75 GeV$ (Fig. 12 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma j} \textrm{ in bin } p_{T}^{ll\gamma} > 75 GeV$ (Fig. 12 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma} / m_{ll\gamma} \textrm{ in bin } 125 GeV < m_{ll\gamma} < 200 GeV$ (Fig. 10 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma} / m_{ll\gamma} \textrm{ in bin } 125 GeV < m_{ll\gamma} < 200 GeV$ (Fig. 10 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma} / m_{ll\gamma} \textrm{ in bin } 200 GeV < m_{ll\gamma} < 300 GeV$ (Fig. 10 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma} / m_{ll\gamma} \textrm{ in bin } 200 GeV < m_{ll\gamma} < 300 GeV$ (Fig. 10 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma} / m_{ll\gamma} \textrm{ in bin } m_{ll\gamma} > 300 GeV$ (Fig. 10 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll\gamma} / m_{ll\gamma} \textrm{ in bin } m_{ll\gamma} > 300 GeV$ (Fig. 10 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} + p_{T}^{\gamma}$ (Fig. 5 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ p_{T}^{ll} + p_{T}^{\gamma}$ (Fig. 5 (c))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ \cos \theta_{CS}$ (Fig. 9 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ \cos \theta_{CS}$ (Fig. 9 (b))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ \phi_{CS}$ (Fig. 9 (a))

Correlation matrix of the statistical uncertainties in the measured fiducial cross section for the observable $ \phi_{CS}$ (Fig. 9 (a))

Best fit of the cross section.

Probability of finding at least one TAR jet, where the p_T-leading TAR jet passes the m_Wcand and D₂^&beta;=1 requirements, as a function of m_s. The probability is determined in a sample of signal events with m_Z'=2100 GeV, with the preselections applied.

Probability of finding a W_had candidate reconstructed as a pair of R=0.4 PFlow jets, as a function of m_s. The probability is determined in a sample of signal events with m_Z'=500 GeV, with the preselections applied that do not pass the requirements of the merged category.

Probability of finding a W_had candidate reconstructed as a pair of R=0.4 PFlow jets, as a function of m_s. The probability is determined in a sample of signal events with m_Z'=1000 GeV, with the preselections applied that do not pass the requirements of the merged category.

Probability of finding a W_had candidate reconstructed as a pair of R=0.4 PFlow jets, as a function of m_s. The probability is determined in a sample of signal events with m_Z'=1700 GeV, with the preselections applied that do not pass the requirements of the merged category.

Probability of finding a W_had candidate reconstructed as a pair of R=0.4 PFlow jets, as a function of m_s. The probability is determined in a sample of signal events with m_Z'=2100 GeV, with the preselections applied that do not pass the requirements of the merged category.

Observed exclusion contour at 95&#37; C.L. for the dark Higgs model in the (m_Z', m_s) plane for g_q=0.25, g_&chi;=1, m_&chi;=200 GeV, and sin&theta;=0.01.

Expected exclusion contour at 95&#37; C.L. for the dark Higgs model in the (m_Z', m_s) plane for g_q=0.25, g_&chi;=1, m_&chi;=200 GeV, and sin&theta;=0.01.

Expected+1&sigma; exclusion contour at 95&#37; C.L. for the dark Higgs model in the (m_Z', m_s) plane for g_q=0.25, g_&chi;=1, m_&chi;=200 GeV, and sin&theta;=0.01.

Expected-1&sigma; exclusion contour at 95&#37; C.L. for the dark Higgs model in the (m_Z', m_s) plane for g_q=0.25, g_&chi;=1, m_&chi;=200 GeV, and sin&theta;=0.01.

Expected+2&sigma; exclusion contour at 95&#37; C.L. for the dark Higgs model in the (m_Z', m_s) plane for g_q=0.25, g_&chi;=1, m_&chi;=200 GeV, and sin&theta;=0.01.

Expected-2&sigma; exclusion contour at 95&#37; C.L. for the dark Higgs model in the (m_Z', m_s) plane for g_q=0.25, g_&chi;=1, m_&chi;=200 GeV, and sin&theta;=0.01.

Observed upper limits at 95&#37; C.L. on &sigma;(pp &rarr; s &chi;&chi;) &times; B(s &rarr; W^&pm; W^&mp;) for m_Z'=0.5 TeV as a function of m_s. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the &sigma;(pp &rarr; s &chi;&chi;) &times; B(s &rarr; W^&pm; W^&mp;) process for m_Z'=0.5 TeV, shown in dashed blue.

Observed upper limits at 95&#37; C.L. on &sigma;(pp &rarr; s &chi;&chi;) &times; B(s &rarr; W^&pm; W^&mp;) for m_Z'=1 TeV as a function of m_s. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the &sigma;(pp &rarr; s &chi;&chi;) &times; B(s &rarr; W^&pm; W^&mp;) process for m_Z'=1 TeV, shown in dashed blue.

Observed upper limits at 95&#37; C.L. on &sigma;(pp &rarr; s &chi;&chi;) &times; B(s &rarr; W^&pm; W^&mp;) for m_Z'=1.7 TeV as a function of m_s. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the &sigma;(pp &rarr; s &chi;&chi;) &times; B(s &rarr; W^&pm; W^&mp;) process for m_Z'=1.7 TeV, shown in dashed blue.

Observed upper limits at 95&#37; C.L. on &sigma;(pp &rarr; s &chi;&chi;) &times; B(s &rarr; W^&pm; W^&mp;) for m_Z'=2.1 TeV as a function of m_s. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the &sigma;(pp &rarr; s &chi;&chi;) &times; B(s &rarr; W^&pm; W^&mp;) process for m_Z'=2.1 TeV, shown in dashed blue.

Data overlaid on SM background yields stacked in each SR and CR category after the fit to data ('Post-fit'). The yields in the SR are broken down into their contributions to the individual bins. The maximum-likelihood estimators are set to the conditional values of the CR-only fit, and propagated to SR and CRs.

Dominant sources of uncertainty for three dark Higgs scenarios after the fit to data. The uncertainties are quantified in terms of their contribution to the fitted signal uncertainty that is expressed relative to the theory prediction. Three representative dark Higgs signal scenarios with g_q=0.25, g_&chi;=1.0, sin&theta;=0.01 and m_&chi;=200 GeV are considered, which are indicated using the (m_Z', m_s) format in units of GeV in the table columns.

Cumulative efficiencies in the merged category for three representative dark Higgs signal scenarios with g_q=0.25, g_&chi;=1.0, sin&theta;=0.01, m_Z' = 1 TeV, and m_&chi;=200 GeV considering s&rarr;W(&ell;&nu;)W(qq) decays only.

Cumulative efficiencies in the resolved category for three representative dark Higgs signal scenarios with g_q=0.25, g_&chi;=1.0, sin&theta;=0.01, m_Z' = 1 TeV, and m_&chi;=200 GeV considering s&rarr;W(&ell;&nu;)W(qq) decays only.

Theoretical cross section for &sigma;(pp &rarr; s&chi;&chi;) &times; B(s &rarr; W^&plusmn;W^&#8723;) for each of the dark Higgs signal points at m_Z′ ={300, 350, 400, 500, 750} GeV, with g_q = 0.25, g<sub>&chi; = 1.0, sin&theta; = 0.01, m_Z′ = 1 TeV , and m_&chi; = 200 GeV. Also shown are experimentally excluded cross sections of &sigma;(pp &rarr; s&chi;&chi;) &times; B(s &rarr; W^&plusmn;W^&#8723;) (Obs.) together with the expectations (Exp.) varied up and down by one standard deviation (&plusmn;1&sigma;).

Theoretical cross section for &sigma;(pp &rarr; s&chi;&chi;) &times; B(s &rarr; W^&plusmn;W^&#8723;) for each of the dark Higgs signal points at m_Z′ ={1000, 1700} GeV, with g_q = 0.25, g<sub>&chi; = 1.0, sin&theta; = 0.01, m_Z′ = 1 TeV , and m_&chi; = 200 GeV. Also shown are experimentally excluded cross sections of &sigma;(pp &rarr; s&chi;&chi;) &times; B(s &rarr; W^&plusmn;W^&#8723;) (Obs.) together with the expectations (Exp.) varied up and down by one standard deviation (&plusmn;1&sigma;).

Theoretical cross section for &sigma;(pp &rarr; s&chi;&chi;) &times; B(s &rarr; W^&plusmn;W^&#8723;) for each of the dark Higgs signal points at m_Z′ ={2100, 2500, 2900, 3300} GeV, with g_q = 0.25, g<sub>&chi; = 1.0, sin&theta; = 0.01, m_Z′ = 1 TeV , and m_&chi; = 200 GeV. Also shown are experimentally excluded cross sections of &sigma;(pp &rarr; s&chi;&chi;) &times; B(s &rarr; W^&plusmn;W^&#8723;) (Obs.) together with the expectations (Exp.) varied up and down by one standard deviation (&plusmn;1&sigma;).

Parametrization of the $A_{X}$ factor, defined as the fraction of diphoton resonances satisfying the fiducial acceptance at the particle level, as function of $m_{X}$ obtained from the narrow width simulated signal samples produced in gluon fusion.

The correction factor, $C_{X}$, defined as the ratio between the number of reconstructed signal events passing the analysis cuts and the number of signal events at the particle level generated within the fiducial volume, and acceptance correction factor, $A_{X}$, defined as the fraction of diphoton resonances satisfying the fiducial acceptance at the particle level. Both are computed for NWA spin-0 models as a function of $m_{X}$.

Effect of event selections on a scalar MC signal sample generated for $m_{X}$ = 15 GeV and on the data. For the MC sample, the efficiencies are shown after applying event weights and a truth level filter that requires two photons with $p^{\gamma\gamma}_{T}>40$ GeV; for the data, the absolute yields are shown. The initial yields for data include a trigger preselection that is the OR of a list of single photon and diphoton triggers. The "2 $loose$ photons" step includes the kinematic acceptance cuts.

Parameterization of the Double Sided Crystal Ball function parameters describing the scalar mass resolution model as a function of $m_{X}$ [GeV].

Expected 95% CL upper limits with 1-sigma uncertainty on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 300 GeV.

Expected 95% CL upper limits with 2-sigma uncertainty on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 300 GeV.

Observed 95% CL upper limits on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 300 GeV.

Expected 95% CL upper limits on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 600 GeV.

Expected 95% CL upper limits with 1-sigma uncertainty on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 600 GeV.

Expected 95% CL upper limits with 2-sigma uncertainty on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 600 GeV.

Observed 95% CL upper limits on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 600 GeV.

Expected 95% CL upper limits on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 900 GeV.

Expected 95% CL upper limits with 1-sigma uncertainty on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 900 GeV.

Expected 95% CL upper limits with 2-sigma uncertainty on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 900 GeV.

Observed 95% CL upper limits on the production of a heavy Higgs boson as functions of fw and fww with mass equal to 900 GeV.

Observed (black solid curve) and expected (black dashed curve) 95% CL upper limits on the production of a heavy Higgs boson as functions of its mass with ( fW, fWW) fixed at (0, 6200). The green (inner) and yellow (outer) bands represent 1 and 2 sigma uncertainty in the expected limits. Theoretical predictions (red solid curve) as functions of the heavy Higgs boson mass are overlaid.

Observed (black solid curve) and expected (black dashed curve) 95% CL upper limits on the production of a heavy Higgs boson as functions of its mass with ( fW, fWW) fixed at (1350, 0). The green (inner) and yellow (outer) bands represent 1 and 2 sigma uncertainty in the expected limits. Theoretical predictions (red solid curve) as functions of the heavy Higgs boson mass are overlaid.

Pre-fit comparison between data and background in the baseline SR for two of the variables used as input for the BSM pBDT: HT.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR HF e.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR HF mu.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR Conv.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR ttW.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR lowBDT.

Data and post-fit background comparison obtained with the background-only fit in the validation region defined for ttW+jets events: number of jets.

Data and post-fit background comparison obtained with the background-only fit in the validation region defined for ttW+jets events: SM BDT.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 400 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 1000 GeV.

Observed (black solid line) and expected (black dashed line) 95% CL upper limits on the ttH/A cross-section times branching fraction of H/A->tt as a function of mH/A.

Observed (red line) and expected (black dashed line) exclusion regions at 95% CL in the tan(beta) versus mass plane assuming that both, a heavy scalar H and pseudo-scalar A, contribute to the tttt final state and have the same mass mH=mA.

Observed (red line) and expected (black dashed line) exclusion regions at 95% CL in the tan(beta) versus mass plane assuming that only the scalar H contributes to the tttt final state.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 500 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 600 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 700 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 800 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 900 GeV.

Observed (red line) and expected (black dashed line) exclusion regions at 95% CL in the tan(beta) versus mass plane assuming that only the pseudo-scalar A contributes to the tttt final state.

The product of acceptance and efficiency (A×ε), defined as the number of signal events satisfying the full set of selection criteria of the BSM SR, divided by the total number of generated signal events, for the tt̄H(→ tt̄ ) process in a type-II 2HDM for tanβ = 1 for the different heavy Higgs mass hypotheses.

Observed 95% CL limits on the production cross-section for scalar up-type LQs decaying into a top quark and a neutrino or a bottom quark and an electron.

Expected 95% CL limits on the production cross-section for scalar up-type LQs decaying into a top quark and a neutrino or a bottom quark and an electron.

Observed 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and a muon.

Expected 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and a muon.

Observed 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and an electron.

Expected 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and an electron.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Product of signal acceptance and efficiency in the training region for scalar up-type LQs decaying into top quarks and neutrinos or bottom quarks and muons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^u\rightarrow b\mu)$.

Product of signal acceptance and efficiency in the training region for scalar up-type LQs decaying into top quarks and neutrinos or bottom quarks and electrons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^u\rightarrow be)$.

Product of signal acceptance and efficiency in the training region for scalar down-type LQs decaying into top quarks and muons or bottom quarks and neutrinos depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^d\rightarrow t\mu)$.

Product of signal acceptance and efficiency in the training region for scalar down-type LQs decaying into top quarks and electrons or bottom quarks and neutrinos depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^d\rightarrow te)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the Yang-Mills coupling scenario decaying into top quarks and neutrinos or bottom quarks and muons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{YM}\rightarrow b\mu)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the Yang-Mills coupling scenario decaying into top quarks and neutrinos or bottom quarks and electrons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{YM}\rightarrow be)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the minimal coupling scenario decaying into top quarks and neutrinos or bottom quarks and muons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{min}\rightarrow b\mu)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the minimal coupling scenario decaying into top quarks and neutrinos or bottom quarks and electrons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{min}\rightarrow be)$.

Cut-flow for the four models containing scalar LQs at a mass of $m_{LQ}=1300$ GeV and $\mathcal{B}(LQ_{mix}\rightarrow q_3\ell)=0.5$.

Cut-flow for the four models containing vector LQs at a mass of $m_{LQ}=1300$ GeV and $\mathcal{B}(LQ_{mix}\rightarrow q_3\ell)=0.5$.

Results of applying the BH algorithm to the mass spectra in the leading photon category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the leading electron category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the leading muon category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the leading small-R jet category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the leading bjet category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the leading large-R jet category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the leading photon category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the leading electron category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the leading muon category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the inclusive category, using the fitted background estimations from the initial step

Results of applying the BH algorithm to the mass spectra in the inclusive category, using the fitted background estimations from the initial step

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading small-R jet category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading bjet category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading large-R jet category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading photon category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading electron category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading muon category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading small-R jet category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading bjet category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading large-R jet category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading photon category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading electron category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the leading muon category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the inclusive category

Upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signal with a relative width value of 3% as a function of mass in the inclusive category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading small-R jet category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading bjet category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading large-R jet category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading photon category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading electron category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading muon category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading small-R jet category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading bjet category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading large-R jet category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading photon category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading electron category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the leading muon category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the inclusive category

Comparison of observed upper limits at 95% CL on the cross section times branching fraction times acceptance for a Gaussian-shaped signals with relative width values as a function of mass in the inclusive category

Acceptance times efficiency in an HVT model as a function of mass in the leading large-R jet category

Upper limits at 95% CL on the cross section times the branching fraction($W^{\prime} \to ZW$) for the HVT signal as functions of mass($m_{ZX}$) in the leading large-R jet category.The full(dashed) red curves correspond to the theoretical predictions of HVT model A(B)

Comparison of the identification efficiencies using standard and merged-ee reconstruction as a function of true PT(Z)

Background rejection factor as a function of signal efficiency. The red curve shows the BDT performance whereas the blue curve corresponds to that of a cut-based analysis relying only on the jet energyfraction deposited in the EM calorimeter

BH p-values of the 100 pseudo-experiments as a function of in the leading small-R jet category for an injected Gaussian-shaped signal with a relative width value of 3%. The fractions of the pseudo-experiments that have the correctly identified interval and BH p-values below the threshold of 0.01 are indicated. The background is derived by the background-only fit in the full fitting range.

BH p-values of the 100 pseudo-experiments as a function of in the leading small-R jet category for an injected Gaussian-shaped signal with a relative width value of 3%. The fractions of the pseudo-experiments that have the correctly identified interval and BH p-values below the threshold of 0.01 are indicated. The background is derived by the background-only fit in the range excluding the BH interval.

Fractions of pseudo-experiments in which the detected BH interval agrees with the injected mass point and the BH p-value is below 0.01 as a function of mass in the leading small-R jet category for Gaussian-shaped signal with a relative width of 3%.

Fractions of pseudo-experiments in which the detected BH interval agrees with the injected mass point and the BH p-value is below 0.01 as a function of mass in the leading small-R jet category for Gaussian-shaped signal with a relative width of 3%.

Distribution of exclusion upper limits on signal event yields at 95% CL from 1000 pseudo-experiments for Gaussian-shaped signals with relative width values of 3% at the low boundary of the limit-sensitive mass range for the ZX spectrum of the leading small-R jet category. The vertical line corresponds to the expected nominal exclusion limit at 95% CL.

Distribution of exclusion upper limits on signal event yields at 95% CL from 1000 pseudo-experiments for Gaussian-shaped signals with relative width values of 3% at the high boundary of the limit-sensitive mass range for the ZX spectrum of the leading small-R jet category. The vertical line corresponds to the expected nominal exclusion limit at 95% CL.

Distribution of exclusion upper limits on signal event yields at 95% CL from 1000 pseudo-experiments for Gaussian-shaped signals with relative width values of 5% at the low boundary of the limit-sensitive mass range for the ZX spectrum of the leading small-R jet category. The vertical line corresponds to the expected nominal exclusion limit at 95% CL.

Distribution of exclusion upper limits on signal event yields at 95% CL from 1000 pseudo-experiments for Gaussian-shaped signals with relative width values of 5% at the high boundary of the limit-sensitive mass range for the ZX spectrum of the leading small-R jet category. The vertical line corresponds to the expected nominal exclusion limit at 95% CL.

Distribution of exclusion upper limits on signal event yields at 95% CL from 1000 pseudo-experiments for Gaussian-shaped signals with relative width values of 10% at the low boundary of the limit-sensitive mass range for the ZX spectrum of the leading small-R jet category. The vertical line corresponds to the expected nominal exclusion limit at 95% CL.

Distribution of exclusion upper limits on signal event yields at 95% CL from 1000 pseudo-experiments for Gaussian-shaped signals with relative width values of 10% at the high boundary of the limit-sensitive mass range for the ZX spectrum of the leading small-R jet category. The vertical line corresponds to the expected nominal exclusion limit at 95% CL.

Data yields of the six event categories in the $Z\to e^+e^-$ and $\mu^+\mu^-$ decay channels. The merged-$e^+e^-$ events are included in the $e^+e^-$ channel, increasing the event yield, mainly in the leading large-$R$-jet category, by 0.6 %.

A list of mass spectra, event categories and their corresponding fit ranges, functional forms, numbers of free parameters and global $\chi^2$ $p$-values from background-only fits. The fit range values are rounded to the nearest 5 GeV. Here $f_1(x)=p_0\left(\mathrm{e}^{-p_1x}+p_2\mathrm{e}^{-(p_1+p_3)x}+p_4\mathrm{e}^{-(p_1+p_3+p_5)x}+\cdots\right)$ and $f_2(x)=p_0(1-x)^{p_1}x^{p_2+p_3\ln\!x+p_4\ln^2\!x+\cdots}$

A list of mass spectra, event categories and their corresponding signal-sensitive mass ranges. The initial BH $p$-value is obtained by using the background derived from the background-only fit in the full fit range, whereas the new BH $p$-value uses the background derived from the background-only fit in the range excluding the initial BH interval.

A list of mass spectra, event categories, relative width values of Gaussian-shaped signals and limit-sensitive mass ranges and fractions, corresponding to the mass values in the previous column, of pseudo-experiments having exclusion upper limits higher than the nominal exclusion limit at 95% CL

Cutflow of HVT model $A$ signals ($W^\prime \to ZW \to \ell\ell qq$) with $m_{W^\prime} = 1$ TeV and $m_{W^\prime} = 4$ TeV based on MC simulations.

Acceptance times efficiency ($\mathcal{A} \times \epsilon$) values in % in the dominant event category for $p^Z_{\mathrm{T}} > 100$ GeV in the $Z \to \ell^{+}\ell^{-}$ decay channel.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-0J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.

Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-1J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.

Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

The upper panel shows the observed number of events in each of the binned SRs defined in Table 3, together with the expected SM backgrounds obtained after applying the efficiency correction method to compute the number of expected FSB events. `Others' include the non-dominant background sources, e.g. $t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. The distributions of two signal points with mass splittings $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 30$ GeV and $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 50$ GeV are overlaid. The lower panel shows the significance as defined in Ref. [115].

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

Cutflow table for the chargino signal sample with $m\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0=(125,25)$ GeV, in the SR-SF BDT-signal$\in (0.77,1]$ and SR-DF BDT-signal$\in (0.81,1]$ regions. The yields include the process cross-section and are weighted to the 139 fb$^{-1}$ luminosity. 170000 events were generated for the sample.

Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for chargino-pair production with $W$-boson-mediated decays in the $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ plane. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

The upper panel shows the observed number of events in the SRs defined in Table 3, together with the expected SM backgrounds obtained after the background fit in the CRs. `Others' include the non-dominant background sources, e.g.$t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. Distributions for three benchmark signal points are overlaid for comparison. The lower panel shows the significance as defined in Ref. [115].

Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the $t\bar{t}$ 3-jets VR, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the $t\bar{t}$ 4-jets VR, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the signal region, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $W$+jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $t\bar{t}$ 3-jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $t\bar{t}$ 4-jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Expected distributions of the MEM discriminant $P(S|X)$ in the SR, for the s-channel single-top signal, and for the $t\bar{t}$ and $W$+jets backgrounds, for MEM discriminant values larger than $2.0\times10^{-4}$. Each distribution is normalised to unity. The binning is the same as the optimised binning used in the signal extraction fit, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the $W$+jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty band indicates the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the $t\bar{t}$ 3-jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty band indicates the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the $t\bar{t}$ 4-jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty bands indicate the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the SR before the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$. The lower panel of the figure shows the ratio of the data to the prediction, with different vertical axis ranges. The uncertainty band indicates the total uncertainties and their correlations in each bin. The uncertainties in the $t\bar{t}$ and $W$+jets normalisation factors, as well as in the s-channel signal cross-section, are not defined pre-fit and therefore not included. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the SR after the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$. The lower panel of the figure shows the ratio of the data to the prediction, with different vertical axis ranges. The uncertainty band indicates the total uncertainties and their correlations in each bin. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the SR after the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$, after subtraction of all backgrounds. The fitted distribution for the simulation of the signal is shown together with the post-fit uncertainty in the backgrounds. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.

Pre-fit and post-fit event yields in the SR, for MEM discriminant values larger than $2.0\times10^{-4}$. The central value of the event yield for each process is calculated by summing the values of the discriminant bin contents, using the nominal expected yield for the pre-fit value, and the best-fit estimate for the post-fit value. The error includes statistical and systematic uncertainties summed in quadrature. All sources of systematic uncertainties are included, taking into account correlations and anti-correlations in the post-fit case. The uncertainties in the $t\bar{t}$ and $W$+jets normalisation factors, as well as in the s-channel signal cross-section, are not defined pre-fit and therefore only included in the post-fit uncertainties.

Observed impact of the different sources of uncertainty on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. The 'Systematic uncertainties' category combines all sources of systematic uncertainties. The statistical uncertainty is obtained by repeating the fit after having fixed all nuisance parameters, including the $t\bar{t}$ and $W$+jets normalisation factors. 'Total' gives the total uncertainty on the measurement.

Observed impact of the different sources of $t\bar{t}$ modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, and 'ME/PS matching' to the matching of the ME to the parton shower.

Observed impact of the different sources of s-channel modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, as described in Section 7 in the paper.

Observed impact of the different sources of t-channel modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, as described in Section 7 in the paper.

Observed impact of the different sources of $tW$ modelling uncertainty on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, and '$t\bar{t}$ overlap' to the algorithm removing the overlap between $tW$ and $t\bar{t}$ production at NLO, as described in Section 7 in the paper.

Observed impact of the different sources of PDF uncertainties on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root.

Comparison between data and prediction after the fit to data in the signal region for the leading-jet $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the leading-jet $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the subleading-jet $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the subleading-jet $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the lepton $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the lepton $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the ${E}_{T}^{miss}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the $m_{T}^{W}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Nuisance parameters ranked according to their post-fit impacts on the best-fit value of the ratio $\mu$ of the measured cross-section to the predicted cross-section. In the figure, only the 20 nuisance parameters with the largest post-fit impacts are shown. The empty (solid) blue rectangles illustrate the pre-fit (post-fit) impact on $\mu$, corresponding to the upper axis. The pre-fit (post-fit) impact of each nuisance parameter, $\Delta\mu$, is calculated as the difference in the fitted value of $\mu$ between the nominal fit and the fit when fixing the corresponding nuisance parameter to $\hat{\theta}\pm\Delta\theta$ ($\hat{\theta}\pm\Delta\hat{\theta}$), where $\hat{\theta}$ is the best-fit value of the nuisance parameter and $\Delta\theta$ ($\Delta\hat{\theta}$) is its pre-fit (post-fit) uncertainty. Several systematic uncertainties are split into different nuisance parameters, which are indicated by NP. JES (JER) indicates jet energy scale (resolution), and $\gamma$ indicates a nuisance parameter associated to the MC statistics in one of the 18 bins numbered from 0 to 17. The black points show the best-fit values of the nuisance parameters, with the error bars representing the post-fit uncertainties. Each nuisance parameter is shown wrt. its nominal value, $\theta_0$, and in units of its pre-fit uncertainty, except the free-floating normalisation factors of the $t\bar{t}$ and $W$+jets backgrounds, and the parameters associated to the MC statistics in each bin, for which the post-fit values and uncertainties are shown.

Correlation matrix of the nuisance parameters and of the ratio $\mu$ of the measured cross-section to the predicted cross-section. The correlations are given after the fit to data. In the figure, only the parameters which have a correlation of at least 0.2 with any other parameter are shown.

Distribution of the MEM discriminant $P(S|X)$ in the SR for MEM discriminant values larger than $2.0\times10^{-4}$, for the collision data used for the measurement, and for 1000 pseudo-data replicas, generated using a bootstrapping technique, in order to assess the statistical correlations between this measurement and others, for the purpose of combinations. The replicas are obtained by reweighting each observed data event by a random integer generated according to Poisson statistics, using the <a href="https://zenodo.org/record/5361038">BootstrapGenerator</a> software package , which implements a technique described in <a href="https://cds.cern.ch/record/2759945/">ATL-PHYS-PUB-2021-011</a>. The ATLAS event number and run number of each event are used as seed to uniquely but reproducibly initialise the random number generator for each event. Each pseudo-data replica is assigned an index, ranging from 0 to 999, corresponding to the random number index used consistently for each observed data event.

Measured values of the signal cross-section and of the $t\bar{t}$ and $W$+jets normalisation factors, obtained by statistical-only fits to the collision data used for the measurement, and to 1000 pseudo-data replicas, generated using a bootstrapping technique, in order to assess the statistical correlations between this measurement and others, for the purpose of combinations. The central values and their statistical uncertainties are obtained by repeating the fit after having fixed all nuisance parameters, except the $t\bar{t}$ and $W$+jets normalisation factors, which are let free-floating (unlike for the statistical uncertainty on the cross-section quoted in the paper). The replicas are obtained by reweighting each observed data event by a random integer generated according to Poisson statistics, using the <a href="https://zenodo.org/record/5361038">BootstrapGenerator</a> software package , which implements a technique described in <a href="https://cds.cern.ch/record/2759945/">ATL-PHYS-PUB-2021-011</a>. The ATLAS event number and run number of each event are used as seed to uniquely but reproducibly initialise the random number generator for each event. Each pseudo-data replica is assigned an index, ranging from 0 to 999, corresponding to the random number index used consistently for each observed data event.

Correlation matrix for the individual sources of systematic uncertainty considered in the analysis, for the combined opposite sign (OS) and same sign (SS) binned-template profile likelihood fit to data. The OS or SS refers to the charge signs of the primary lepton and the soft muon. The gamma parameters are NPs used to describe the effect of the limited statistics of the samples.

The $m_{jj}$ distributions for the CRs and the BDT classifier response distribution for the SR after the fit in all regions. The dashed line shows the total background distribution before the fit. The vertical error bars on the data points correspond to the data's statistical uncertainty. Overflows are included in the last bin. The uncertainty band corresponds to the combination of the MC statistical uncertainty and systematic uncertainties obtained in the fit.

The $m_{jj}$ distributions for the CRs and the BDT classifier response distribution for the SR after the fit in all regions. The dashed line shows the total background distribution before the fit. The vertical error bars on the data points correspond to the data's statistical uncertainty. Overflows are included in the last bin. The uncertainty band corresponds to the combination of the MC statistical uncertainty and systematic uncertainties obtained in the fit.

The $m_{jj}$ distributions for the CRs and the BDT classifier response distribution for the SR after the fit in all regions. The dashed line shows the total background distribution before the fit. The vertical error bars on the data points correspond to the data's statistical uncertainty. Overflows are included in the last bin. The uncertainty band corresponds to the combination of the MC statistical uncertainty and systematic uncertainties obtained in the fit.

Observed and expected event yields for the signal and all of the background processes considered in this analysis after the fit to the data in all of the regions. The uncertainty on the expected yield is the combination of statistical and systematic uncertainties obtained in the fit. The individual uncertainties can be correlated and do not necessarily add in quadrature to equal the total background uncertainty.

Summary of the event yield for processes in all regions, after the fit over all regions. The dashed line shows the total background distribution before the fit. The vertical error bars on the data points correspond to the data's statistical uncertainty. The uncertainty band corresponds to the combination of the MC statistical uncertainty and systematic uncertainties obtained in the fit.

Impact of different components of systematic uncertainty on the measured cross section, without taking into account the correlations. The impact is calculated by fixing the value of the corresponding nuisance parameters to the values obtained in the fit used to measure the cross section, performing the fit, estimating the signal strength uncertainty and subtracting it from the nominal uncertainty in quadrature.

Fitted POI values for this analysis, the previous ATLAS analysis, and their combination. The first and second columns present the values obtained in the individual analyses. The third column presents the values obtained in the combination.

Observed and expected one-dimensional limits on dimension 8 aQGC parameters. Limits are obtained by setting all aQGCs parameters except one to zero. Unitarity is not preserved.