Summary of results for cross-section of non-prompt $\psi(2S)$ decaying to a muon pair for 13 TeV data in fb/GeV. Uncertainties are statistical and systematic, respectively.

Summary of results for non-prompt fraction of $J/\psi$ decaying to a muon pair as a percentage for 13 TeV data. Uncertainties are statistical and systematic, respectively.

Summary of results for non-prompt fraction of $\psi(2S)$ decaying to a muon pair as a percentage for 13 TeV data. Uncertainties are statistical and systematic, respectively.

Summary of results for prompt $\psi(2S)$ over $J/\psi$ ratio as a percentage for 13 TeV data. Uncertainties are statistical and systematic, respectively.

Summary of results for non-prompt $\psi(2S)$ over $J/\psi$ ratio as a percentage for 13 TeV data. Uncertainties are statistical and systematic, respectively.

Correction factors for an assumed angular dependence $\propto 1+\lambda_{\theta} \cos^2\theta $ in the helicity frame, for several values of the parameter $\lambda_{\theta}$. The correction factors were found to be the same (within 1% - 2%) for $J/\psi$ and $\psi(2S)$ mesons, for prompt and non-prompt production mechanisms, and for the three rapidity intervals considered in this paper.

Charged-hadron spectrum in the centrality interval 5-10% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 10-20% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 20-30% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 30-40% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 40-60% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 60-90% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 0-90% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron cross-section in pp collisions. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 0-5% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 5-10% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 10-20% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 20-30% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 30-40% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 40-50% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 50-60% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 60-80% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron cross-section in pp collisions. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 0-5% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 5-10% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 10-20% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 20-30% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 30-40% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 40-50% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 50-60% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 60-80% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Final state radiation correction used in the $\phi_{\eta}^{*}$ cross-section measurement. The first uncertainty is statistical and the second is systematic.

Final state radiation correction used in the $y^{Z}-p_{T}^{Z}$ cross-section measurement. The first uncertainty is statistical and the second is systematic.

Final state radiation correction used in the $y^{Z}-\phi_{\eta}^{*}$ cross-section measurement. The first uncertainty is statistical and the second is systematic.

Correlation matrix of statistical uncertainty for one-dimensional $y^Z$ measurement.

Correlation matrix of statistical uncertainty for one-dimensional $p_{T}^{Z}$ measurement.

Correlation matrix of statistical uncertainty for one-dimensional $\phi_{\eta}^{*}$ measurement.

Correlation matrix of statistical uncertainty for two-dimensional $y^Z-p_{T}^{Z}$ measurement.

Correlation matrix of statistical uncertainty for two-dimensional $y^Z-\phi_{\eta}^{*}$ measurement.

Correlation matrix of efficiency uncertainty for one-dimensional $y^Z$ measurement.

Correlation matrix of efficiency uncertainty for one-dimensional $p_{T}^{Z}$ measurement.

Correlation matrix of efficiency uncertainty for one-dimensional $\phi_{\eta}^{*}$ measurement.

Correlation matrix of efficiency uncertainty for two-dimensional $y^Z-p_{T}^{Z}$ measurement.

Correlation matrix of efficiency uncertainty for two-dimensional $y^Z-\phi_{\eta}^{*}$ measurement.

Measured total $Z$-boson cross-section for different datasets. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured single differential cross-sections in interval regions of $y^{Z}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured single differential cross-sections in interval regions of $p_{T}^{Z}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured single differential cross-sections in interval regions of $\phi_{\eta}^{*}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured double differential cross-sections in interval regions of $y^{Z}$ and $p_{T}^{Z}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured double differential cross-sections in interval regions of $y^{Z}$ and $\phi_{\eta}^{*}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Systematic uncertainties in the single differential cross-sections in interval regions of $y^{Z}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Systematic uncertainties in the single differential cross-sections in interval regions of $p_{T}^{Z}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Systematic uncertainties in the single differential cross-sections in interval regions of $\phi_{\eta}^{*}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Systematic uncertainties in the double differential cross-sections in interval regions of $y^{Z}$ and $p_{T}^{Z}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Systematic uncertainties in the double differential cross-sections in interval regions of $y^{Z}$ and $\phi_{\eta}^{*}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Single-differential production cross-sections for nonprompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainties are statistical, the second are correlated systematic uncertainties shared between intervals, and the last are uncorrelated systematic uncertainties.

Single-differential production cross-sections for prompt $J/\psi$ mesons as a function of $y$. The first uncertainties are statistical, the second are correlated systematic uncertainties shared between intervals, and the last are uncorrelated systematic uncertainties.

Single-differential production cross-sections for nonprompt $J/\psi$ mesons as a function of $y$. The first uncertainties are statistical, the second are correlated systematic uncertainties shared between intervals, and the last are uncorrelated systematic uncertainties.

Fraction of nonprompt $J/\psi$ mesons (in \%) in ($p_\text{T},y$) intervals. The first uncertainty is statistical and the second is systematic.

Nuclear modification factor $R_{p\text{Pb}}$ for prompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Nuclear modification factor $R_{p\text{Pb}}$ for nonprompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 8 TeV and 5 TeV measurements for prompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 8 TeV and 5 TeV measurements for prompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 13 TeV and 5 TeV measurements for prompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 13 TeV and 5 TeV measurements for prompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 8 TeV and 5 TeV measurements for nonprompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 8 TeV and 5 TeV measurements for nonprompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 13 TeV and 5 TeV measurements for nonprompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 13 TeV and 5 TeV measurements for nonprompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Relative changes of cross-sections (in \%), for a polarisation of $\lambda_{\theta}=-0.2$ rather than zero, in ($p_\text{T},y$) intervals.

Relative changes of cross-sections (in \%), for a polarisation of $\lambda_{\theta}=-1$ rather than zero, in ($p_\text{T},y$) intervals.

Relative changes of cross-sections (in \%), for a polarisation of $\lambda_{\theta}=+1$ rather than zero, in ($p_\text{T},y$) intervals.

Nuclear modification factor for prompt charged particles at 5TeV with respect to pseudorapidity and transverse momentum in the forward region region. The pseudorapidity is expressed in the nucleon-nucleon center-of-mass system. First uncertainty is statistical, the second is systematic and the third is from the luminosity. Luminosity uncertainty is fully correlated among the different kinematic ranges.

Nuclear modification factor for prompt charged particles at 5TeV with respect to pseudorapidity and transverse momentum in the backward region region. The pseudorapidity is expressed in the nucleon-nucleon center-of-mass system. First uncertainty is statistical, the second is systematic and the third is from the luminosity. Luminosity uncertainty is fully correlated among the different kinematic ranges.

Mean $p_T$ values of the $\Upsilon(1$S$)$, $\Upsilon(2$S$)$, and $\Upsilon(3$S$)$ states with $p_T\,>\,0\,GeV$ and $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $0<p_T<5\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $5<p_T<7\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $7<p_T<9\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $9<p_T<11\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $11<p_T<15\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $15<p_T<20\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $20<p_T<50\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $0<p_T<5\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $5<p_T<7\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $7<p_T<9\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $9<p_T<11\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $11<p_T<15\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $15<p_T<20\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $20<p_T<50\,$GeV range

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of "forward" track multiplicity $N_{track}^{\Delta\phi}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$. Forward tracks are those with momentum direction in $\Delta\phi\,<\,\pi/3$ w.r.t. the $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of "transverse" track multiplicity $N_{track}^{\Delta\phi}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$. Transverse tracks are those with momentum direction in $\pi/3\,<\,\Delta\phi\,<\,2\pi/3$ w.r.t. the $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of "backward" track multiplicity $N_{track}^{\Delta\phi}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$. Backward tracks are those with momentum direction in $\Delta\phi\,>\,2\pi/3$ w.r.t. the $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$ and $N^{\Delta R}_{track}\,=\,0$ charged particles produced in $\Delta R\,<\,0.5$ cone around $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$ and $N^{\Delta R}_{track}\,=\,1$ charged particles produced in $\Delta R\,<\,0.5$ cone around $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$ and $N^{\Delta R}_{track}\,=\,2$ charged particles produced in $\Delta R\,<\,0.5$ cone around $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$ and $N^{\Delta R}_{track}\,>\,2$ charged particles produced in $\Delta R\,<\,0.5$ cone around $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ in transverse sphericity bin $0.00\,<\,S_T\,<\,0.55$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ in transverse sphericity bin $0.55\,<\,S_T\,<\,0.70$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ in transverse sphericity bin $0.70\,<\,S_T\,<\,0.85$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ in transverse sphericity bin $0.85\,<\,S_T\,<\,1.00$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$.

Efficiency-corrected multiplicity bins used in the $\Upsilon(n$S$)$ ratio analysis and the corresponding mean number of charged particle tracks.

Ratio of differential cross section of AK1 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Differential production cross-sections of $\eta_c$ for production in $b$-hadron inclusive decays. The uncertainties are statistical, systematic, and due to the $\eta_c\to p \bar{p}$ and $J/\psi\to p \bar{p}$ branching fractions and $J/\psi$ production cross-section.

$\Upsilon(1S)$ production cross-section in $p$Pb and Pb$p$, as a function of $y^*$. The uncertainty is the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ production cross-section in $p$Pb and Pb$p$, as a function of $p_{T}$. The uncertainty is the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ production cross-section in $p$Pb and Pb$p$, as a function of $y^*$. The uncertainty is the sum in quadrature of the statistical and systematic components.

Scaled $pp$ differential cross-section in $p_{T}$ at $\sqrt{s_{NN}}=8.16$ TeV. The first uncertainty is statistical, the second is systematic, which includes the systematic uncertainty from the $pp$ measurement and that estimated by changing the interpolation function.

Scaled $pp$ differential cross-section in $y$ at $\sqrt{s_{NN}}=8.16$ TeV. The first uncertainty is statistical, the second is systematic, which includes the systematic uncertainty from the $pp$ measurement and that estimated by changing the interpolation function.

$\Upsilon(1S)$ nuclear modification factor, $R_{p{\rm Pb}}^{\Upsilon(1S)}$, in $p$Pb and Pb$p$ as a function of $p_{T}$ integrated over $y^*$ in the range $1.5 < y^* < 4.0$ for $p$Pb and $-5.0 < y^* < -2.5$ for Pb$p$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(1S)$ nuclear modification factor, $R_{p{\rm Pb}}^{\Upsilon(1S)}$, in $p$Pb and Pb$p$ as a function of $y^*$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV$/c$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ nuclear modification factor, $R_{p{\rm Pb}}^{\Upsilon(2S)}$, in $p$Pb and Pb$p$ as a function of $p_{T}$ integrated over $y^*$ in the range $1.5 < y^* < 4.0$ for $p$Pb and $-5.0 < y^* < -2.5$ for Pb$p$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ nuclear modification factor, $R_{p{\rm Pb}}^{\Upsilon(2S)}$, in $p$Pb and Pb$p$ as a function of $y^*$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV$/c$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(1S)$ forward-to-backward ratio, $R_{{\rm FB}}^{\Upsilon(1S)}$, as a function of $p_{T}$ integrated over $\vert y^* \vert$ in the range $2.5 < \vert y^* \vert < 4.0$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(1S)$ forward-to-backward ratio, $R_{{\rm FB}}^{\Upsilon(1S)}$, as a function of $\vert y^* \vert$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV/c. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ to $\Upsilon(1S)$ ratio, in $p$Pb and Pb$p$ as a function of $p_{T}$ integrated over $y^*$ in the range $1.5 < y^* < 4.0$ for $p$Pb and $-5.0 < y^* < -2.5$ for Pb$p$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ to $\Upsilon(1S)$ ratio, in $p$Pb and Pb$p$ as a function of $y^*$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV/c. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(1S)$ to non-prompt $J/\psi$, in $p$Pb and Pb$p$ as a function of $y^*$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV/c. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

The covariance matrix for the kinematic bins matrix of the $D_s^+$ production asymmetry measured using the combined $\sqrt{s} =7$ and 8 TeV data sets (corresponding to Table 1). The statistical and systematic uncertainties are combined. The kinematic bins are indexed as follows: the three rapidity bins, y, in the range from 2.0 to 4.5 are indexed with $i_y$ ranging from 0 to 2 with the following bin edges: 2.0, 3.0, 3.5, 4.5. The four $p_{\rm T}$ bins in the range from 2.5 to 25.0 GeV/c are indexed with $i_{p_T}$ from 0 to 3 with the following bin edges: 2.5, 4.7, 6.5, 8.5, 25.0 GeV/c. The index of a kinematic bins is then given by: $i_{\rm bin} = 4 \times i_y + i_{p_T}$.

The covariance matrix for the kinematic bins matrix of the $D_s^+$ production asymmetry measured using the $\sqrt{s} =7$ TeV data set (corresponding to Table 2). The statistical and systematic uncertainties are combined. The kinematic bins are indexed as follows: the three rapidity bins, y, in the range from 2.0 to 4.5 are indexed with $i_y$ ranging from 0 to 2 with the following bin edges: 2.0, 3.0, 3.5, 4.5. The four $p_{\rm T}$ bins in the range from 2.5 to 25.0 GeV/c are indexed with $i_{p_T}$ from 0 to 3 with the following bin edges: 2.5, 4.7, 6.5, 8.5, 25.0 GeV/c. The index of a kinematic bins is then given by: $i_{\rm bin} = 4 \times i_y + i_{p_T}$.

The covariance matrix for the kinematic bins matrix of the $D_s^+$ production asymmetry measured using the $\sqrt{s} =8$ TeV data set (corresponding to Table 3). The statistical and systematic uncertainties are combined. The kinematic bins are indexed as follows: the three rapidity bins, y, in the range from 2.0 to 4.5 are indexed with $i_y$ ranging from 0 to 2 with the following bin edges: 2.0, 3.0, 3.5, 4.5. The four $p_{\rm T}$ bins in the range from 2.5 to 25.0 GeV/c are indexed with $i_{p_T}$ from 0 to 3 with the following bin edges: 2.5, 4.7, 6.5, 8.5, 25.0 GeV/c. The index of a kinematic bins is then given by: $i_{\rm bin} = 4 \times i_y + i_{p_T}$.