Fit of elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\pi^{+}\pi^{-}$ photoproduction off protons with a Soeding-inspired analytic function --- statistical correlations only. Only one half of the (symmetric) matrix is stored.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\pi^{+}\pi^{-}$ photoproduction off protons, differential in the dipion mass and in bins of $W$. The tabulated cross sections are $\gamma p$ cross sections but can be converted to $ep$ cross sections using the effective photon flux $\Phi_{\gamma/e}$.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\pi^{+}\pi^{-}$ photoproduction off protons, differential in the dipion mass and in bins of $W$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction off protons, in bins of the photon-proton energy $W$. The cross section is defined as the integral of the relativistic Breit Wigner resonance in the dipion mass over the range $2m_\pi<m_{\pi\pi}<1.53$ GeV. The tabulated cross sections are $\gamma p$ cross sections but can be converted to $ep$ cross sections using the effective photon flux $\Phi_{\gamma/e}$.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction off protons in bins of the photon-proton energy $W$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Fit of elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction cross sections off protons as a function of energy. Parameters with subscript "el" and "pd" correspond to elastic and proton-dissociative cross sections, respectively.

Fit of elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction cross sections off protons as a function of energy --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Fit of elastic $\rho^0(770)$ photoproduction cross section off protons as a function of energy (various experiments)

Fit of elastic $\rho^0(770)$ photoproduction cross sections off protons as a function of energy (various experiments) --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\pi^{+}\pi^{-}$ photoproduction cross section off protons, double-differential in the dipion mass and the momentum transfer $\vert t\vert$. The tabulated cross sections are $\gamma p$ cross sections but can be converted to $ep$ cross sections using the effective photon flux $\Phi_{\gamma/e}$.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\pi^{+}\pi^{-}$ photoproduction cross section off protons, double-differential in the dipion mass and the momentum transfer $\vert t\vert$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction off protons, single-differential in the momentum transfer $\vert t\vert$. The cross section is defined as the integral of the relativistic Breit Wigner resonance in the dipion mass over the range $2m_\pi<m_{\pi\pi}<1.53$ GeV. The tabulated cross sections are $\gamma p$ cross sections but can be converted to $ep$ cross sections using the effective photon flux $\Phi_{\gamma/e}$.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction off protons, single differential in the momentum transfer $\vert t\vert$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Fit of elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction single-differential cross sections off protons as a function of momentum transfer $t$. Parameters with subscript "el" and "pd" correspond to elastic and proton-dissociative cross sections, respectively.

Fit of elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction single-differential cross sections off protons as a function of momentum transfer $t$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\pi^{+}\pi^{-}$ photoproduction double-differenial cross section off protons, as a function of the dipion mass and the momentum transfer $\vert t\vert$, in bins of the photon-proton energy $W$ The tabulated cross sections are $\gamma p$ cross sections but can be converted to $ep$ cross sections using the effective photon flux $\Phi_{\gamma/e}$.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\pi^{+}\pi^{-}$ photoproduction double-differenial cross section off protons, as a function of the dipion mass and the momentum transfer $\vert t\vert$, in bins of the photon-proton energy $W$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction off protons, single-differential in the momentum transfer $\vert t\vert$, in bins of the photon-proton energy $W$. The cross section is defined as the integral of the relativistic Breit Wigner resonance in the dipion mass over the range $2m_\pi<m_{\pi\pi}<1.53$ GeV. The tabulated cross sections are $\gamma p$ cross sections but can be converted to $ep$ cross sections using the effective photon flux $\Phi_{\gamma/e}$.

Elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction cross section off protons, single differential in the momentum transfer $\vert t\vert$ and in bins of the photon-proton energy $W$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Regge fit of elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction single-differential cross sections off protons as a function of momentum transfer $t$ and photon-proton energy $W$. Parameters with subscript "el" and "pd" correspond to elastic and proton-dissociative cross sections, respectively.

Regge fit of elastic ($m_Y=m_p$) and proton-dissociative ($1<m_Y<10$ GeV) $\rho^0(770)$ photoproduction single-differential cross sections off protons as a function of momentum transfer $t$ and photon-proton energy $W$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Fit of $b$-slopes in elastic ($m_Y=m_p$) $\rho^0(770)$ photoproduction single-differential cross sections off protons as a function of momentum transfer $t$ in bins of photon-proton energy $W$.

Fit of $b$-slopes in elastic ($m_Y=m_p$) $\rho^0(770)$ photoproduction single-differential cross sections off protons as a function of momentum transfer $t$ in bins of photon-proton energy $W$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Fit of Pomeron trajectories in elastic ($m_Y=m_p$) $\rho^0(770)$ photoproduction single-differential cross sections off protons as a function of momentum transfer $t$ in bins of photon-proton energy $W$.

Fit of Pomeron trajectories in elastic ($m_Y=m_p$) $\rho^0(770)$ photoproduction single-differential cross sections off protons as a function of momentum transfer $t$ in bins of photon-proton energy $W$ --- statistical correlations coefficients $\rho_{ij}$ only. Only one half of the (symmetric) matrix is stored. Bins are identified by their global bin number.

Ratio of differential cross section of AK1 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

$\Upsilon(1S)$ production cross-section in $p$Pb and Pb$p$, as a function of $y^*$. The uncertainty is the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ production cross-section in $p$Pb and Pb$p$, as a function of $p_{T}$. The uncertainty is the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ production cross-section in $p$Pb and Pb$p$, as a function of $y^*$. The uncertainty is the sum in quadrature of the statistical and systematic components.

Scaled $pp$ differential cross-section in $p_{T}$ at $\sqrt{s_{NN}}=8.16$ TeV. The first uncertainty is statistical, the second is systematic, which includes the systematic uncertainty from the $pp$ measurement and that estimated by changing the interpolation function.

Scaled $pp$ differential cross-section in $y$ at $\sqrt{s_{NN}}=8.16$ TeV. The first uncertainty is statistical, the second is systematic, which includes the systematic uncertainty from the $pp$ measurement and that estimated by changing the interpolation function.

$\Upsilon(1S)$ nuclear modification factor, $R_{p{\rm Pb}}^{\Upsilon(1S)}$, in $p$Pb and Pb$p$ as a function of $p_{T}$ integrated over $y^*$ in the range $1.5 < y^* < 4.0$ for $p$Pb and $-5.0 < y^* < -2.5$ for Pb$p$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(1S)$ nuclear modification factor, $R_{p{\rm Pb}}^{\Upsilon(1S)}$, in $p$Pb and Pb$p$ as a function of $y^*$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV$/c$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ nuclear modification factor, $R_{p{\rm Pb}}^{\Upsilon(2S)}$, in $p$Pb and Pb$p$ as a function of $p_{T}$ integrated over $y^*$ in the range $1.5 < y^* < 4.0$ for $p$Pb and $-5.0 < y^* < -2.5$ for Pb$p$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ nuclear modification factor, $R_{p{\rm Pb}}^{\Upsilon(2S)}$, in $p$Pb and Pb$p$ as a function of $y^*$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV$/c$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(1S)$ forward-to-backward ratio, $R_{{\rm FB}}^{\Upsilon(1S)}$, as a function of $p_{T}$ integrated over $\vert y^* \vert$ in the range $2.5 < \vert y^* \vert < 4.0$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(1S)$ forward-to-backward ratio, $R_{{\rm FB}}^{\Upsilon(1S)}$, as a function of $\vert y^* \vert$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV/c. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ to $\Upsilon(1S)$ ratio, in $p$Pb and Pb$p$ as a function of $p_{T}$ integrated over $y^*$ in the range $1.5 < y^* < 4.0$ for $p$Pb and $-5.0 < y^* < -2.5$ for Pb$p$. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(2S)$ to $\Upsilon(1S)$ ratio, in $p$Pb and Pb$p$ as a function of $y^*$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV/c. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

$\Upsilon(1S)$ to non-prompt $J/\psi$, in $p$Pb and Pb$p$ as a function of $y^*$ integrated over $p_{T}$ in the range $0 < p_{T} < 25$ GeV/c. The quoted uncertainties are the sum in quadrature of the statistical and systematic components.

Differential cross-sections multiplied by dimuon branching fractions for $\Upsilon$(1S), $\Upsilon$(2S) and $\Upsilon$(3S) states versus $p_T$ integrated over $y$ between 2.0 and 4.5.

Differential cross-sections multiplied by dimuon branching fractions for $\Upsilon$(1S), $\Upsilon$(2S) and $\Upsilon$(3S) states versus $y$ integrated over $p_T$ from 0 to 15 GeV/c.

Ratios of double-differential cross-sections times dimuon branching fractions for $\Upsilon$(2S) to $\Upsilon$(1S).

Ratios of double-differential cross-sections times dimuon branching fractions for $\Upsilon$(3S) to $\Upsilon$(1S).

Ratios of differential cross-sections times dimuon branching fractions versus $p_T$ over $y$ for $\Upsilon$(2S) to $\Upsilon$(1S) and $\Upsilon$(3S) to $\Upsilon$(1S).

Ratios of differential cross-sections times dimuon branching fractions versus $y$ over $p_T$ for $\Upsilon$(2S) to $\Upsilon$(1S) and $\Upsilon$(3S) to $\Upsilon$(1S).

The cross-section ratios between 13 TeV and 8 TeV in different bins of $p_T$ and $y$ for $\Upsilon$(1S).

The cross-section ratios between 13 TeV and 8 TeV in different bins of $p_T$ and $y$ for $\Upsilon$(2S).

The cross-section ratios between 13 TeV and 8 TeV in different bins of $p_T$ and $y$ for $\Upsilon$(3S).

Ratios of differential cross-sections between 13 TeV and 8 TeV measurements versus $p_T$ over $y$ for $\Upsilon$(1S), $\Upsilon$(2S) and $\Upsilon$(3S).

Ratios of differential cross-sections between 13 TeV and 8 TeV measurements versus $y$ over $p_T$ for $\Upsilon$(1S), $\Upsilon$(2S) and $\Upsilon$(3S).

Double-differential cross section times the dimuon branching fraction of the Y(2S) meson for different ranges of pT in bins of |y| and for the full |y| < 1.2 range, for the unpolarized decay hypothesis. The global uncertainty in the integrated luminosity of 2.3% is not included in the systematic uncertainties.

Double-differential cross section times the dimuon branching fraction of the Y(3S) meson for different ranges of pT in bins of |y| and for the full |y| < 1.2 range, for the unpolarized decay hypothesis. The global uncertainty in the integrated luminosity of 2.3% is not included in the systematic uncertainties.

Multiplicative scaling factors to obtain the J/psi differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, +0.10, -1) from the unpolarized cross section measurements given in Table 1.

Multiplicative scaling factors to obtain the psi(2S) differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, +0.03, -1) from the unpolarized cross section measurements given in Table 2.

Multiplicative scaling factors to obtain the Y(1S) differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, k, -1) from the unpolarized cross section measurements given in Table 3. The parameter k corresponds to a linear interpolation of the CMS measured value as a function of pT for pT < 50 GeV. For pT > 50 GeV, where no measurements exist, k is taken as the average of all the measured values for pT < 50 GeV.

Multiplicative scaling factors to obtain the Y(2S) differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, k, -1) from the unpolarized cross section measurements given in Table 3. The parameter k corresponds to a linear interpolation of the CMS measured value as a function of pT for pT < 50 GeV. For pT > 50 GeV, where no measurements exist, k is taken as the average of all the measured values for pT < 50 GeV.

Multiplicative scaling factors to obtain the Y(3S) differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, k, -1) from the unpolarized cross section measurements given in Table 3. The parameter k corresponds to a linear interpolation of the CMS measured value as a function of pT for pT < 50 GeV. For pT > 50 GeV, where no measurements exist, k is taken as the average of all the measured values for pT < 50 GeV.

Ratio of differential cross section times branching fractions of the prompt psi(2S) to J/psi mesons assuming unpolarized productions as a function of pT for |y| < 1.2.

Ratios of differential cross section times branching fractions of the prompt Y(2S) to Y(1S) and Y(3S) to Y(1S) mesons assuming unpolarized productions as a function of pT for |y| < 1.2.

Inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 16.0-22.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 6 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 22.0-30.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 6 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 30.0-42.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 6 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 42.0-60.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 6 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 60.0-80.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 6 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 5.5-8.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 7 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 8.0-11.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 7 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 11.0-16.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 7 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 16.0-22.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 7 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 22.0-30.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 7 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 30.0-42.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 7 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 42.0-60.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 7 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 60.0-80.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 7 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 5.5-8.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 8 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 8.0-11.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 8 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 11.0-16.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 8 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 16.0-22.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 8 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 22.0-30.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 8 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 30.0-42.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 8 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 42.0-60.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 8 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 60.0-80.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 8 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 5.5-8.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 9 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 8.0-11.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 9 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 11.0-16.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 9 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 16.0-22.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 9 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 22.0-30.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 9 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 30.0-42.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 9 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 42.0-60.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 9 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised inclusive jet cross sections measured as a function of $P_T^{\rm jet}$ for $Q^2$ = 60.0-80.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 9 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 5.5-8.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 10 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 8.0-11.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 10 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 11.0-16.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 10 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 16.0-22.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 10 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 22.0-30.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 10 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 30.0-42.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 10 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 42.0-60.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 10 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised dijet cross sections measured as a function of $\langle P_T \rangle_2$ for $Q^2$ = 60.0-80.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 10 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 5.5-8.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 11 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 8.0-11.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 11 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 11.0-16.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 11 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 16.0-22.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 11 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 22.0-30.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 11 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 30.0-42.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 11 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 42.0-60.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 11 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised trijet cross sections measured as a function of $\langle P_T \rangle_3$ for $Q^2$ = 60.0-80.0 GeV$^2$. The correction factors on the theoretical cross sections $c^{\rm had}$ are listed together with their uncertainties. The radiative correction factors $c^{\rm rad}$ are already included in the quoted cross sections. Note that the uncertainties labelled $\delta^{E_{e^\prime}}$ and $\delta^{\theta_{e^\prime}}$ in Table 11 of the paper (arXiv:1611.03421v3) should be swapped. See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Matrix of statistical correlation coefficients of the unfolded jet cross sections at low $Q^2$.

Matrix of statistical correlation coefficients of the unfolded normalised jet cross sections at low $Q^2$.

Inclusive jet cross sections for $P_T^{\rm jet}$ = 5-7 GeV$^2$ measured as a function of $Q^2$ in the range 150-15000 GeV$^2$. The cross section values and uncertainties have been determined in the scope of the analysis of an earlier H1 publication (<a href="https://inspirehep.net/record/1301218">INSPIRE</a>, <a href="https://www.hepdata.net/record/ins1301218">HEPData</a>). See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Normalised inclusive jet cross sections for $P_T^{\rm jet}$ = 5-7 GeV$^2$ measured as a function of $Q^2$ in the range 150-15000 GeV$^2$. The cross section values and uncertainties have been determined in the scope of the analysis of an earlier H1 publication (<a href="https://inspirehep.net/record/1301218">INSPIRE</a>, <a href="https://www.hepdata.net/record/ins1301218">HEPData</a>). See Table 5 of arXiv:1406.4709v2 for details of the correlation model.

Matrix of statistical correlation coefficients of the unfolded jet cross sections at high $Q^2$. The statistical correlations have been determined in the scope of the analysis of an earlier H1 publication (<a href="https://inspirehep.net/record/1301218">INSPIRE</a>, <a href="https://www.hepdata.net/record/ins1301218">HEPData</a>).

Matrix of statistical correlation coefficients of the unfolded normalised jet cross sections at high $Q^2$. The statistical correlations have been determined in the scope of the analysis of an earlier H1 publication (<a href="https://inspirehep.net/record/1301218">INSPIRE</a>, <a href="https://www.hepdata.net/record/ins1301218">HEPData</a>).

The strong coupling extracted from the normalised inclusive jet, dijet and trijet data at NLO as a function of the renormalisation scale $\mu_r$. For each $\mu_r$ the values of the strong coupling $\alpha_s(\mu_r)$ and the equivalent values $\alpha_s(M_Z)$ are given with experimental (exp) and theoretical (th) uncertainties.

The electron channel Born-level single-differential cross section DSIG/DM. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-". The ratio of the dressed-level to Born-level predictions (kDressed) is also provided.

The electron channel Born-level double-differential cross section D2SIG/DM/DABSYRAP. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-". The ratio of the dressed-level to Born-level predictions (kDressed) is also provided.

The electron channel Born-level double-differential cross section D2SIG/DM/DABSDETA. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-". The ratio of the dressed-level to Born-level predictions (kDressed) is also provided.

The muon channel Born-level single-differential cross section DSIG/DM. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-". The ratio of the dressed-level to Born-level predictions (kdressed) is also provided.

The muon channel Born-level double-differential cross section D2SIG/DM/DABSYRAP. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-". The ratio of the dressed-level to Born-level predictions (kdressed) is also provided.

The muon channel Born-level double-differential cross section D2SIG/DM/DABSDETA. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-". The ratio of the dressed-level to Born-level predictions (kdressed) is also provided.

Born-level differential fiducial cross section prediction DSIG/DM at NNLO including NLO electroweak corrections and the PI contribution. The calculation is performed using the MMHT2014 NNLO PDF set and with dynamic scales set equal to the invariant mass. The predictions are listed together with the statistical uncertainty, the PDF eigenvector variation, the uncertainty from the variation of alpha_s, the combined uncertainty from mu_F and mu_R, and the uncertainty from the variation of the photon PDF in the PI contribution. The fraction of the PI contribution, f(PI), is also given.

Born-level differential fiducial cross section prediction D2SIG/DM/DABSYRAP at NNLO including NLO electroweak corrections and the PI contribution. The calculation is performed using the MMHT2014 NNLO PDF set and with dynamic scales set equal to the invariant mass. The predictions are listed together with the statistical uncertainty, the PDF eigenvector variation, the uncertainty from the variation of alpha_s, the combined uncertainty from mu_F and mu_R, and the uncertainty from the variation of the photon PDF in the PI contribution. The fraction of the PI contribution, f(PI), is also given.

Born-level differential fiducial cross section prediction D2SIG/DM/DABSDETA at NNLO including NLO electroweak corrections and the PI contribution. The calculation is performed using the MMHT2014 NNLO PDF set and with dynamic scales set equal to the invariant mass. The predictions are listed together with the statistical uncertainty, the PDF eigenvector variation, the uncertainty from the variation of alpha_s, the combined uncertainty from mu_F and mu_R, and the uncertainty from the variation of the photon PDF in the PI contribution. The fraction of the PI contribution, f(PI), is also given.

Statistical correlation between the measurement bins in mass, absolute rapidity and absolute pseudorapidity separation in the electron channel for 116 GeV < M(EE) < 150 GeV.

Statistical correlation between the measurement bins in mass, absolute rapidity and absolute pseudorapidity separation in the electron channel for 150 GeV < M(EE) < 200 GeV.

Statistical correlation between the measurement bins in mass, absolute rapidity and absolute pseudorapidity separation in the electron channel for 200 GeV < M(EE) < 300 GeV.

Statistical correlation between the measurement bins in mass, absolute rapidity and absolute pseudorapidity separation in the electron channel for 300 GeV < M(EE) < 500 GeV.

Statistical correlation between the measurement bins in mass, absolute rapidity and absolute pseudorapidity separation in the electron channel for 500 GeV < M(EE) < 1500 GeV.

The electron channel dressed-level single-differential cross section DSIG/DM. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 116 GeV < M(EE) < 150 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 150 GeV < M(EE) < 200 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 200 GeV < M(EE) < 300 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 300 GeV < M(EE) < 500 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 500 GeV < M(EE) < 1500 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel Born-level double-differential cross section D2SIG/DM/DABSDETA in the bin 116 GeV < M(EE) < 150 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel Born-level double-differential cross section D2SIG/DM/DABSDETA in the bin 150 GeV < M(EE) < 200 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel Born-level double-differential cross section D2SIG/DM/DABSDETA in the bin 200 GeV < M(EE) < 300 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel Born-level double-differential cross section D2SIG/DM/DABSDETA in the bin 300 GeV < M(EE) < 500 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The electron channel Born-level double-differential cross section D2SIG/DM/DABSDETA in the bin 500 GeV < M(EE) < 1500 GeV. The measurements are listed together with the statistical uncertainties. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), electron reconstruction efficiency (reco), electron identification efficiency (id), the isolation efficiency (iso), the electron energy resolution (Eres), the electron energy scale (Escale), the multijet and W+jets background (mult.), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level single-differential cross section DSIG/DM. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 116 GeV < M(MM) < 150 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 150 GeV < M(MM) < 200 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 200 GeV < M(MM) < 300 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 300 GeV < M(MM) < 500 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSYRAP in the bin 500 GeV < M(MM) < 1500 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSDETA in the bin 116 GeV < M(MM) < 150 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSDETA in the bin 150 GeV < M(MM) < 200 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSDETA in the bin 200 GeV < M(MM) < 300 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSDETA in the bin 300 GeV < M(MM) < 500 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

The muon channel dressed-level double-differential cross section D2SIG/DM/DABSDETA in the bin 500 GeV < M(MM) < 1500 GeV. The measurements are listed together with the statistical (stat) uncertainty. In addition the contributions from the individual correlated (cor) and uncorrelated (unc) systematic error sources are also provided consisting of the trigger efficiency (trig), muon reconstruction efficiency (reco), the MS resolution (MSres), the ID resolution (IDres), the muon transverse momentum scale (pT), the isolation efficiency (iso), the top and diboson background normalisation (top, diboson), the top and diboson background MC statistical uncertainty (bgMC), the multijet background uncertainty (mult), the signal MC statistical uncertainty (MC), and the luminosity uncertainty (lumi). The sign of the uncertainty corresponds to a one standard deviation upward shift of the uncertainty source, where +/- means "+" and -/+ means "-".

Inclusive Jet Cross Section for |rapidity| 1.5 TO 2.0 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.7). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| 2.0 TO 2.5 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.7). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| 2.5 TO 3.0 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.7). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| 3.2 TO 4.7 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.7). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| < 0.5 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.4). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| 0.5 TO 1.0 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.4). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| 1.0 TO 1.5 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.4). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| 1.5 TO 2.0 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.4). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| 2.0 TO 2.5 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.4). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| 2.5 TO 3.0 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.4). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.

Inclusive Jet Cross Section for |rapidity| 3.2 TO 4.7 as a function of the jet transverse momentum. Jets are clustered with the anti-kt algorithm ( R = 0.4). The (sys) error is the total systematic error, including the luminosity uncertainty of 2.7%.