The Bs meson $p_{\rm{T}}$-dependent RAA in PpPp. The measurment was carried out inside a fiducial region respecting ($p_{\rm{T}}$<10 & 1.5<|y|<2.4) and ($p_{\rm{T}}$>10 & |y|<2.4).

non prompt $\psi(2S)$ $\lambda_\theta$

Summary of results for cross-section of non-prompt $\psi(2S)$ decaying to a muon pair for 13 TeV data in fb/GeV. Uncertainties are statistical and systematic, respectively.

Summary of results for non-prompt fraction of $J/\psi$ decaying to a muon pair as a percentage for 13 TeV data. Uncertainties are statistical and systematic, respectively.

Summary of results for non-prompt fraction of $\psi(2S)$ decaying to a muon pair as a percentage for 13 TeV data. Uncertainties are statistical and systematic, respectively.

Summary of results for prompt $\psi(2S)$ over $J/\psi$ ratio as a percentage for 13 TeV data. Uncertainties are statistical and systematic, respectively.

Summary of results for non-prompt $\psi(2S)$ over $J/\psi$ ratio as a percentage for 13 TeV data. Uncertainties are statistical and systematic, respectively.

Correction factors for an assumed angular dependence $\propto 1+\lambda_{\theta} \cos^2\theta $ in the helicity frame, for several values of the parameter $\lambda_{\theta}$. The correction factors were found to be the same (within 1% - 2%) for $J/\psi$ and $\psi(2S)$ mesons, for prompt and non-prompt production mechanisms, and for the three rapidity intervals considered in this paper.

Charged-hadron spectrum in the centrality interval 5-10% for p+Pb, divided by &#9001;TPPB&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 10-20% for p+Pb, divided by &#9001;TPPB&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 20-30% for p+Pb, divided by &#9001;TPPB&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 30-40% for p+Pb, divided by &#9001;TPPB&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 40-60% for p+Pb, divided by &#9001;TPPB&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 60-90% for p+Pb, divided by &#9001;TPPB&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 0-90% for p+Pb, divided by &#9001;TPPB&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron cross-section in pp collisions. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 0-5% for Pb+Pb, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 5-10% for Pb+Pb, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 10-20% for Pb+Pb, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 20-30% for Pb+Pb, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 30-40% for Pb+Pb, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 40-50% for Pb+Pb, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 50-60% for Pb+Pb, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 60-80% for Pb+Pb, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron cross-section in pp collisions. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 0-5% for Xe+Xe, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 5-10% for Xe+Xe, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 10-20% for Xe+Xe, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 20-30% for Xe+Xe, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 30-40% for Xe+Xe, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 40-50% for Xe+Xe, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 50-60% for Xe+Xe, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 60-80% for Xe+Xe, divided by &#9001;TAA&#9002;. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Differential cross sections as function of transverse momentum imbalance between Z boson and dijet for Z+ ≥ 2 jets events.

Differential cross sections as function of transverse momentum imbalance between leading and subleading jet for Z+ ≥ 2 jets events.

Area normalized distribution as function of Delta Phi between Z boson and the leading jet for Z+ ≥ 1 jet events.

Area normalized distribution as function of transverse momentum imbalance between Z boson and the leading jet for Z+ ≥ 1 jet events.

Area normalized distribution as function of Delta Phi between Z boson and dijet for Z+ ≥ 2 jets events.

Area normalized distribution as function of transverse momentum imbalance between Z boson and dijet for Z+ ≥ 2 jets events.

Area normalized distribution as function of transverse momentum imbalance between leading and subleading jet for Z+ ≥ 2 jets events

Response matrix for Delta Phi between Z boson and the leading jet for Z+ ≥ 1 jet events.

Response matrix for transverse momentum imbalance between Z boson and the leading jet for Z+ ≥ 1 jet events.

Response matrix for Delta Phi between Z boson and dijet for Z+ ≥ 2 jets events.

Response matrix for transverse momentum imbalance between Z boson and dijet for Z+ ≥ 2 jets events.

Response matrix for transverse momentum imbalance between the leading jet and subleading jet for Z+ ≥ 2 jets events.

Correlation matrix for Delta Phi between Z boson and the leading jet for Z+ ≥ 1 jet events (for absolute differential cross section measurements).

Correlation matrix for transverse momentum imbalance between Z boson and the leading jet for Z+ ≥ 1 jet events (for absolute differential cross section measurements).

Correlation matrix for Delta Phi between Z boson and dijet for Z+ ≥ 2 jets events (for absolute differential cross section measurements).

Correlation matrix for transverse momentum imbalance between Z boson and dijet for Z+ ≥ 2 jets events (for absolute differential cross section measurements).

Correlation matrix for transverse momentum imbalance between the leading jet and subleading jet for Z+ ≥ 2 jets events (for absolute differential cross section measurements).

Correlation matrix for Delta Phi between Z boson and the leading jet for Z+ ≥ 1 jet events (for normalized differential cross section measurements).

Correlation matrix for transverse momentum imbalance between Z boson and the leading jet for Z+ ≥ 1 jet events (for normalized differential cross section measurements).

Correlation matrix for Delta Phi between Z boson and dijet for Z+ ≥ 2 jets events (for normalized differential cross section measurements).

Correlation matrix for transverse momentum imbalance between Z boson and dijet for Z+ ≥ 2 jets events (for normalized differential cross section measurements).

Correlation matrix for transverse momentum imbalance between the leading jet and subleading jet for Z+ ≥ 2 jets events (for normalized differential cross section measurements).

Differential fiducial cross section (without the acceptance correction) for the DY process measured in the muon channel, as a function of $p_{\textrm{T}}$ for $15<m_{\mu\mu}<60$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential fiducial cross section (without the acceptance correction) for the DY process measured in the muon channel, as a function of $p_{\textrm{T}}$ for $60<m_{\mu\mu}<120$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential fiducial cross section (without the acceptance correction) for the DY process measured in the muon channel, as a function of $\phi^*$ for $15<m_{\mu\mu}<60$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential fiducial cross section (without the acceptance correction) for the DY process measured in the muon channel, as a function of $\phi^*$ for $60<m_{\mu\mu}<120$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Integrated fiducial cross section for the DY process measured in the muon channel. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential cross section for the DY process measured in the muon channel, as a function of dimuon invariant mass. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential cross section for the DY process measured in the muon channel, as a function of rapidity in the centre-of-mass frame for $15<m_{\mu\mu}<60$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential cross section for the DY process measured in the muon channel, as a function of rapidity in the centre-of-mass frame for $60<m_{\mu\mu}<120$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential cross section for the DY process measured in the muon channel, as a function of $p_{\textrm{T}}$ for $15<m_{\mu\mu}<60$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential cross section for the DY process measured in the muon channel, as a function of $p_{\textrm{T}}$ for $60<m_{\mu\mu}<120$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential cross section for the DY process measured in the muon channel, as a function of $\phi^*$ for $15<m_{\mu\mu}<60$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Differential cross section for the DY process measured in the muon channel, as a function of $\phi^*$ for $60<m_{\mu\mu}<120$ GeV. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Integrated cross section for the DY process measured in the muon channel. The quoted error is the quadratic sum of the statistical and systematic uncertainties. The global normalisation uncertainty of 3.5% is listed separately.

Forward-backward ratios for $15<m_{\mu\mu}<60$ GeV. Quoted uncertainties are the quadratic sum of the statistical and systematic uncertainties.

Forward-backward ratios for $60<m_{\mu\mu}<120$ GeV. Quoted uncertainties are the quadratic sum of the statistical and systematic uncertainties.

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of dimuon invariant mass.

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of rapidity in the centre-of-mass frame for $15<m_{\mu\mu}<60$ GeV.

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of rapidity in the centre-of-mass frame for $60<m_{\mu\mu}<120$ GeV.

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of $p_{\textrm{T}}$ for $15<m_{\mu\mu}<60$ GeV.

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of $p_{\textrm{T}}$ for $60<m_{\mu\mu}<120$ GeV.

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of $\phi^*$ for $15<m_{\mu\mu}<60$ GeV.

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of $\phi^*$ for $60<m_{\mu\mu}<120$ GeV.

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of rapidity in the centre-of-mass frame, putting together low and high masses. Each bin is labeled lm_i or hm_i, where lm stands for $15<m_{\mu\mu}<60$ GeV, hm stands for $60<m_{\mu\mu}<120$ GeV, and i is the corresponding bin number in rapidity in the centre-of-mass frame. The global normalisation uncertainty of 3.5% is not included. Data from Figure [3, 4, 4].

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of $p_{\textrm{T}}$, putting together low and high masses. Each bin is labeled lm_i or hm_i, where lm stands for $15<m_{\mu\mu}<60$ GeV, hm stands for $60<m_{\mu\mu}<120$ GeV, and i is the corresponding bin number in $p_{\textrm{T}}$. The global normalisation uncertainty of 3.5% is not included. Data from Figure [3, 4, 4].

Correlation matrix for the systematic uncertainties, excluding integrated luminosity, as a function of $\phi^*$, putting together low and high masses. Each bin is labeled lm_i or hm_i, where lm stands for $15<m_{\mu\mu}<60$ GeV, hm stands for $60<m_{\mu\mu}<120$ GeV, and i is the corresponding bin number in $\phi^*$. The global normalisation uncertainty of 3.5% is not included. Data from Figure [3, 4, 4].

Mean $p_T$ values of the $\Upsilon(1$S$)$, $\Upsilon(2$S$)$, and $\Upsilon(3$S$)$ states with $p_T\,>\,0\,GeV$ and $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $0<p_T<5\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $5<p_T<7\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $7<p_T<9\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $9<p_T<11\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $11<p_T<15\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $15<p_T<20\,$GeV range

Ratio $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $20<p_T<50\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $0<p_T<5\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $5<p_T<7\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $7<p_T<9\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $9<p_T<11\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $11<p_T<15\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $15<p_T<20\,$GeV range

Ratio $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ with $|y|\,<\,1.2$ as a function of track multiplicity $N_{track}$ in $20<p_T<50\,$GeV range

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of "forward" track multiplicity $N_{track}^{\Delta\phi}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$. Forward tracks are those with momentum direction in $\Delta\phi\,<\,\pi/3$ w.r.t. the $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of "transverse" track multiplicity $N_{track}^{\Delta\phi}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$. Transverse tracks are those with momentum direction in $\pi/3\,<\,\Delta\phi\,<\,2\pi/3$ w.r.t. the $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of "backward" track multiplicity $N_{track}^{\Delta\phi}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$. Backward tracks are those with momentum direction in $\Delta\phi\,>\,2\pi/3$ w.r.t. the $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$ and $N^{\Delta R}_{track}\,=\,0$ charged particles produced in $\Delta R\,<\,0.5$ cone around $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$ and $N^{\Delta R}_{track}\,=\,1$ charged particles produced in $\Delta R\,<\,0.5$ cone around $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$ and $N^{\Delta R}_{track}\,=\,2$ charged particles produced in $\Delta R\,<\,0.5$ cone around $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$ and $N^{\Delta R}_{track}\,>\,2$ charged particles produced in $\Delta R\,<\,0.5$ cone around $\Upsilon(n$S$)$ momentum direction.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ in transverse sphericity bin $0.00\,<\,S_T\,<\,0.55$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ in transverse sphericity bin $0.55\,<\,S_T\,<\,0.70$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ in transverse sphericity bin $0.70\,<\,S_T\,<\,0.85$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$.

Ratios $\Upsilon(2$S$)\,/\,\Upsilon(1$S$)$ and $\Upsilon(3$S$)\,/\,\Upsilon(1$S$)$ as functions of track multiplicity $N_{track}$ in transverse sphericity bin $0.85\,<\,S_T\,<\,1.00$ for $\Upsilon(n$S$)$ states with $p_T\,>\,7\,GeV$ and $|y|\,<\,1.2$.

Efficiency-corrected multiplicity bins used in the $\Upsilon(n$S$)$ ratio analysis and the corresponding mean number of charged particle tracks.

Ratio of differential cross section of AK1 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK2 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK3 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK4 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK5 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK6 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK7 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK8 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK9 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK10 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK11 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range |y|<0.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range 0.5<|y|<1.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.0<|y|<1.5. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of differential cross section of AK12 jets with respect to AK4 jets a function of jet PT in the rapidity range 1.5<|y|<2.0. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range |y|<0.5 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 0.5<|y|<1.0 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.0<|y|<1.5 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 84 < p_{T} < 97 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 97 < p_{T} < 133 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 133 < p_{T} < 196 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 196 < p_{T} < 272 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 272 < p_{T} < 330 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 330 < p_{T} < 395 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 395 < p_{T} < 468 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 468 < p_{T} < 548 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 548 < p_{T} < 638 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

Ratio of cross section of inclusive anti-KT jets with respect to AK4 jets as a function of jet size in the rapidity range 1.5<|y|<2.0 and PT 638 < p_{T} < 1588 GeV. The nonperturbative correction can be used to scale fixed-order theory prediction to compare to data at particle level.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

Double-differential cross section times the dimuon branching fraction of the Y(2S) meson for different ranges of pT in bins of |y| and for the full |y| < 1.2 range, for the unpolarized decay hypothesis. The global uncertainty in the integrated luminosity of 2.3% is not included in the systematic uncertainties.

Double-differential cross section times the dimuon branching fraction of the Y(3S) meson for different ranges of pT in bins of |y| and for the full |y| < 1.2 range, for the unpolarized decay hypothesis. The global uncertainty in the integrated luminosity of 2.3% is not included in the systematic uncertainties.

Multiplicative scaling factors to obtain the J/psi differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, +0.10, -1) from the unpolarized cross section measurements given in Table 1.

Multiplicative scaling factors to obtain the psi(2S) differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, +0.03, -1) from the unpolarized cross section measurements given in Table 2.

Multiplicative scaling factors to obtain the Y(1S) differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, k, -1) from the unpolarized cross section measurements given in Table 3. The parameter k corresponds to a linear interpolation of the CMS measured value as a function of pT for pT < 50 GeV. For pT > 50 GeV, where no measurements exist, k is taken as the average of all the measured values for pT < 50 GeV.

Multiplicative scaling factors to obtain the Y(2S) differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, k, -1) from the unpolarized cross section measurements given in Table 3. The parameter k corresponds to a linear interpolation of the CMS measured value as a function of pT for pT < 50 GeV. For pT > 50 GeV, where no measurements exist, k is taken as the average of all the measured values for pT < 50 GeV.

Multiplicative scaling factors to obtain the Y(3S) differential cross sections for different polarization scenarios (Lambda_{Theta} = +1, k, -1) from the unpolarized cross section measurements given in Table 3. The parameter k corresponds to a linear interpolation of the CMS measured value as a function of pT for pT < 50 GeV. For pT > 50 GeV, where no measurements exist, k is taken as the average of all the measured values for pT < 50 GeV.

Ratio of differential cross section times branching fractions of the prompt psi(2S) to J/psi mesons assuming unpolarized productions as a function of pT for |y| < 1.2.

Ratios of differential cross section times branching fractions of the prompt Y(2S) to Y(1S) and Y(3S) to Y(1S) mesons assuming unpolarized productions as a function of pT for |y| < 1.2.