Showing 50 of 51 results
A search is presented for the pair production of higgsinos $\tilde{\chi}$ in gauge-mediated supersymmetry models, where the lightest neutralinos $\tilde{\chi}_1^0$ decay into a light gravitino $\tilde{G}$ either via a Higgs $h$ or $Z$ boson. The search is performed with the ATLAS detector at the Large Hadron Collider using 139 fb$^{-1}$ of proton-proton collisions at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV. It targets final states in which a Higgs boson decays into a photon pair, while the other Higgs or $Z$ boson decays into a $b\bar{b}$ pair, with missing transverse momentum associated with the two gravitinos. Search regions dependent on the amount of missing transverse momentum are defined by the requirements that the diphoton mass should be consistent with the mass of the Higgs boson, and the $b\bar{b}$ mass with the mass of the Higgs or $Z$ boson. The main backgrounds are estimated with data-driven methods using the sidebands of the diphoton mass distribution. No excesses beyond Standard Model expectations are observed and higgsinos with masses up to 320 GeV are excluded, assuming a branching fraction of 100% for $\tilde{\chi}_1^0\rightarrow h\tilde{G}$. This analysis excludes higgsinos with masses of 130 GeV for branching fractions to $h\tilde{G}$ as low as 36%, thus providing complementarity to previous ATLAS searches in final states with multiple leptons or multiple $b$-jets, targeting different decays of the electroweak bosons.
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <b>Histograms:</b><ul> <li><a href=?table=Distribution1>Figure 3a: $m_{\gamma\gamma}$ Distribution in VR1</a> <li><a href=?table=Distribution2>Figure 3b: $E_{\mathrm{T}}^{\mathrm{miss}}$ Distribution in VR1</a> <li><a href=?table=Distribution3>Figure 3c: $m_{\gamma\gamma}$ Distribution in VR2</a> <li><a href=?table=Distribution4>Figure 3d: $E_{\mathrm{T}}^{\mathrm{miss}}$ Distribution in VR2</a> <li><a href=?table=Distribution5>Figure 4a: N-1 $m_{\gamma\gamma}$ Distribution for SR1h</a> <li><a href=?table=Distribution6>Figure 4b: N-1 $m_{\gamma\gamma}$ Distribution for SR1Z</a> <li><a href=?table=Distribution7>Figure 4c: N-1 $m_{\gamma\gamma}$ Distribution for SR2</a> <li><a href=?table=Distribution8>Auxiliary Figure 1: Signal and Validation Region Yields</a> </ul> <b>Tables:</b><ul> <li><a href=?table=YieldsTable1>Table 3: Signal Region Yields & Model-independent Limits</a> <li><a href=?table=Cutflow1>Auxiliary Table 1: Benchmark Signal Cutflows</a> </ul> <b>Cross section limits:</b><ul> <li><a href=?table=X-sectionU.L.1>Figure 5: 1D Cross-section Limits</a> <li><a href=?table=X-sectionU.L.2>Auxiliary Figure 3: 2D Cross-section Limits</a> </ul> <b>2D CL limits:</b><ul> <li><a href=?table=Exclusioncontour1>Figure 6: Expected Limit on $\mathrm{BF}(\tilde{\chi}_1^0\rightarrow h\tilde{G})$</a> <li><a href=?table=Exclusioncontour2>Figure 6: $+1\sigma$ Variation for Expected Limit on $\mathrm{BF}(\tilde{\chi}_1^0\rightarrow h\tilde{G})$</a> <li><a href=?table=Exclusioncontour3>Figure 6: $-1\sigma$ Variation for Expected Limit on $\mathrm{BF}(\tilde{\chi}_1^0\rightarrow h\tilde{G})$</a> <li><a href=?table=Exclusioncontour4>Figure 6: Observed Limit on $\mathrm{BF}(\tilde{\chi}_1^0\rightarrow h\tilde{G})$</a> <li><a href=?table=Exclusioncontour5>Figure 6: $+1\sigma$ Variation for Observed Limit on $\mathrm{BF}(\tilde{\chi}_1^0\rightarrow h\tilde{G})$</a> <li><a href=?table=Exclusioncontour6>Figure 6: $-1\sigma$ Variation for Observed Limit on $\mathrm{BF}(\tilde{\chi}_1^0\rightarrow h\tilde{G})$</a> </ul> <b>2D Acceptance and Efficiency maps:</b><ul> <li><a href=?table=Acceptance1>Auxiliary Figure 4a: Acceptances SR1h</a> <li><a href=?table=Acceptance2>Auxiliary Figure 4b: Acceptances SR1Z</a> <li><a href=?table=Acceptance3>Auxiliary Figure 4c: Acceptances SR2</a> <li><a href=?table=Efficiency1>Auxiliary Figure 5a: Efficiencies SR1h</a> <li><a href=?table=Efficiency2>Auxiliary Figure 5b: Efficiencies SR1Z</a> <li><a href=?table=Efficiency3>Auxiliary Figure 5c: Efficiencies SR2</a> </ul>
Distribution of the diphoton invariant mass in validation region VR1. The solid histograms are stacked to show the SM expectations after the 2×2D background estimation technique is applied. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb̄h, all subdominant in this signature. Statistical and systematic uncertainties are indicated by the shaded area. The lower panel of each plot shows the ratio of the data to the SM prediction for the respective bin. The first and last bins include the underflows and overflows respectively.
Distribution of the missing transverse momentum in validation region VR1. The solid histograms are stacked to show the SM expectations after the 2×2D background estimation technique is applied. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb̄h, all subdominant in this signature. Statistical and systematic uncertainties are indicated by the shaded area. The lower panel of each plot shows the ratio of the data to the SM prediction for the respective bin. The first and last bins include the underflows and overflows respectively.
Distribution of the diphoton invariant mass in validation region VR2. The solid histograms are stacked to show the SM expectations after the 2×2D background estimation technique is applied. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb̄h, all subdominant in this signature. Statistical and systematic uncertainties are indicated by the shaded area. The lower panel of each plot shows the ratio of the data to the SM prediction for the respective bin. The first and last bins include the underflows and overflows respectively.
Distribution of the missing transverse momentum in validation region VR2. The solid histograms are stacked to show the SM expectations after the 2×2D background estimation technique is applied. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb̄h, all subdominant in this signature. Statistical and systematic uncertainties are indicated by the shaded area. The lower panel of each plot shows the ratio of the data to the SM prediction for the respective bin. The first and last bins include the underflows and overflows respectively.
Distribution of the diphoton invariant mass with all selections of the signal regions applied, except on m<sub>γγ</sub> itself, for signal region SR1h. The background estimation techniques described in the text are applied. The different backgrounds are stacked to add up to the total SM prediction in each bin. The predicted yields for signal benchmark models of varying χ̃<sup>0</sup><sub>1</sub> mass are also overlaid (not stacked) assuming B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) to equal 100%. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb̄h, all subdominant in this signature. The sizes of the statistical and systematic uncertainties are indicated by the shaded areas. The lower panels show the ratio of the data to the SM prediction. Arrows indicate the borders of the signal region (|m<sub>γγ</sub>-125 GeV|<5 GeV). The first and last bins include the underflows and overflows respectively.
Distribution of the diphoton invariant mass with all selections of the signal regions applied, except on m<sub>γγ</sub> itself, for signal region SR1Z. The background estimation techniques described in the text are applied. The different backgrounds are stacked to add up to the total SM prediction in each bin. The predicted yields for signal benchmark models of varying χ̃<sup>0</sup><sub>1</sub> mass are also overlaid (not stacked) assuming B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) to equal 50%. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb̄h, all subdominant in this signature. The sizes of the statistical and systematic uncertainties are indicated by the shaded areas. The lower panels show the ratio of the data to the SM prediction. Arrows indicate the borders of the signal region (|m<sub>γγ</sub>-125 GeV|<5 GeV). The first and last bins include the underflows and overflows respectively.
Distribution of the diphoton invariant mass with all selections of the signal regions applied, except on m<sub>γγ</sub> itself, for signal region SR2. The background estimation techniques described in the text are applied. The different backgrounds are stacked to add up to the total SM prediction in each bin. The predicted yields for signal benchmark models of varying χ̃<sup>0</sup><sub>1</sub> mass are also overlaid (not stacked) assuming B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) to equal 100%. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb̄h, all subdominant in this signature. The sizes of the statistical and systematic uncertainties are indicated by the shaded areas. The lower panels show the ratio of the data to the SM prediction. Arrows indicate the borders of the signal region (|m<sub>γγ</sub>-125 GeV|<5 GeV). The first and last bins include the underflows and overflows respectively.
Observed and expected limits on the pure higgsino cross-section at 95% CL assuming B(χ̃<sup>0</sup><sub>1</sub> → hG̃ )=100% for different χ̃<sup>0</sup><sub>1</sub> masses, obtained by a statistical combination of the three signal regions SR1h, SR1Z and SR2. The inner and outer bands indicate the 1σ and 2σ variation on the expected limit respectively.
Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) as a function of the higgsino mass m(χ̃<sup>0</sup><sub>1</sub>) assuming it decays via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The ± 1σ variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by ±1 σ. Values of B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.
Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) as a function of the higgsino mass m(χ̃<sup>0</sup><sub>1</sub>) assuming it decays via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The ± 1σ variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by ±1 σ. Values of B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.
Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) as a function of the higgsino mass m(χ̃<sup>0</sup><sub>1</sub>) assuming it decays via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The ± 1σ variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by ±1 σ. Values of B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.
Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) as a function of the higgsino mass m(χ̃<sup>0</sup><sub>1</sub>) assuming it decays via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The ± 1σ variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by ±1 σ. Values of B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.
Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) as a function of the higgsino mass m(χ̃<sup>0</sup><sub>1</sub>) assuming it decays via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The ± 1σ variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by ±1 σ. Values of B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.
Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) as a function of the higgsino mass m(χ̃<sup>0</sup><sub>1</sub>) assuming it decays via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The ± 1σ variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by ±1 σ. Values of B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.
Numbers of signal and background events in the signal regions. The respective background estimation techniques are applied. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb̄h, all subdominant in this signature. The different backgrounds are stacked to add up to the total Standard Model prediction in each bin. The predicted yields for signal benchmark models of varying χ̃<sup>0</sup><sub>1</sub> mass are also plotted (not stacked), assuming B(χ̃<sup>0</sup><sub>1</sub> → hG̃ )=100% and a χ̃<sup>0</sup><sub>1</sub> mass of 130 or 200 GeV. The statistical and systematic uncertainties are indicated by the shaded areas in the top plot. The bottom panel shows the statistical significance <a href="https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PUBNOTES/ATL-PHYS-PUB-2020-025/">[Ref]</a> of the difference between the SM prediction and the observed data in each region.
Observed 95% CL limits in pb on the pure higgsino cross-section, shown in the m(χ̃<sup>0</sup><sub>1</sub>)-B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) plane. Limits are obtained by a statistical combination of the three signal regions SR1h, SR1Z and SR2, assuming the neutralino to decay via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃.
Acceptances for all signal model points considered in the analysis, shown in the m(χ̃<sup>0</sup><sub>1</sub>)-B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) plane. Acceptances are provided separately for signal region SR1h, assuming the neutralino to decay via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃.
Acceptances for all signal model points considered in the analysis, shown in the m(χ̃<sup>0</sup><sub>1</sub>)-B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) plane. Acceptances are provided separately for signal region SR1Z, assuming the neutralino to decay via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃.
Acceptances for all signal model points considered in the analysis, shown in the m(χ̃<sup>0</sup><sub>1</sub>)-B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) plane. Acceptances are provided separately for signal region SR2, assuming the neutralino to decay via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃.
Efficiencies for all signal model points considered in the analysis, shown in the m(χ̃<sup>0</sup><sub>1</sub>)-B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) plane. Efficiencies are provided separately for signal region SR1h, assuming the neutralino to decay via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃.
Efficiencies for all signal model points considered in the analysis, shown in the m(χ̃<sup>0</sup><sub>1</sub>)-B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) plane. Efficiencies are provided separately for signal region SR1Z, assuming the neutralino to decay via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃.
Efficiencies for all signal model points considered in the analysis, shown in the m(χ̃<sup>0</sup><sub>1</sub>)-B(χ̃<sup>0</sup><sub>1</sub> → hG̃ ) plane. Efficiencies are provided separately for signal region SR2, assuming the neutralino to decay via either χ̃<sup>0</sup><sub>1</sub>→ hG̃ or χ̃<sup>0</sup><sub>1</sub>→ ZG̃.
Observed and expected numbers of events in the three signal regions. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb̄h, all subdominant in this signature. The table also includes model-independent 95% CL upper limits on the visible number of BSM events (S<sup>95</sup><sub>obs</sub>), the number of BSM events given the expected number of background events (S<sup>95</sup><sub>exp</sub>) and the visible BSM cross-section (⟨ε σ⟩<sub>obs</sub><sup>95</sup>), all calculated from pseudo-experiments. The discovery p-value (p<sub>0</sub>) is also shown and its value is capped at 0.5 if the observed number of events is below the expected number of events.
Cutflows of two benchmark signal points assuming B(χ̃<sup>0</sup><sub>1</sub> → hG̃ )=100% for all three discovery signal regions. The initial selection includes the leptons veto. Only statistical uncertainties are included. Expected yields are normalised to a luminosity of 139 fb<sup>-1</sup>.
Higgsinos with masses near the electroweak scale can solve the hierarchy problem and provide a dark matter candidate, while detecting them at the LHC remains challenging if their mass-splitting is $\mathcal{O}$(1 GeV). This Letter presents a novel search for nearly mass-degenerate higgsinos in events with an energetic jet, missing transverse momentum, and a low-momentum track with a significant transverse impact parameter using 140 fb$^{-1}$ of proton-proton collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS experiment. For the first time since LEP, a range of mass-splittings between the lightest charged and neutral higgsinos from 0.3 GeV to 0.9 GeV is excluded at 95% confidence level, with a maximum reach of approximately 170 GeV in the higgsino mass.
Number of expected and observed data events in the SR (top), and the model-independent upper limits obtained from their consistency (bottom). The symbol $\tau_{\ell}$ ($\tau_{h}$) refers to fully-leptonic (hadron-involved) tau decays. The Others category includes contributions from minor background processes including $t\bar{t}$, single-top and diboson. The individual uncertainties can be correlated and do not necessarily sum up in quadrature to the total uncertainty. The bottom section shows the observed 95% CL upper limits on the visible cross-section ($\langle\epsilon\sigma\rangle_{\mathrm{obs}}^{95}$), on the number of generic signal events ($S_{\mathrm{obs}}^{95}$) as well as the expected limit ($S_{\mathrm{exp}}^{95}$) given the expected number (and $\pm 1\sigma$ deviations from the expectation) of background events.
Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.
Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.
Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.
Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.
Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.
Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.
Expected and observed CLs values per signal point represented by the grey numbers. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid along with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively.
Expected and observed CLs values per signal point represented by the grey numbers. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid along with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively.
Expected and observed cross-section upper-limit per signal point represented by the grey numbers. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid along with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively.
Expected and observed cross-section upper-limit per signal point represented by the grey numbers. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid along with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively.
Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.
Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.
Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.
Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.
Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.
Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.
Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.
Event selection cutflows for signal samples with $m(\tilde{\chi}_{1}^0)$ = 150 GeV and $\Delta m(\tilde{\chi}_{1}^\pm, \tilde{\chi}_{1}^0)$ = 1.5, 1.0, and 0.75 GeV, including all six production processes ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$). The cross-section used to obtain the initial number of events ($\sigma(\mathrm{n}_{\mathrm{jets}}) \geq 1$) refers to an emission of at least one gluon or quark with $p_{\mathrm{T}} > 50$ GeV at the parton level.
Event selection cutflows for signal samples with $m(\tilde{\chi}_{1}^0)$ = 150 GeV and $\Delta m(\tilde{\chi}_{1}^\pm, \tilde{\chi}_{1}^0)$ = 0.5, 0.35, and 0.25 GeV, including all six production processes ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$). The cross-section used to obtain the initial number of events ($\sigma(\mathrm{n}_{\mathrm{jets}}) \geq 1$) refers to an emission of at least one gluon or quark with $p_{\mathrm{T}} > 50$ GeV at the parton level.
A search for a new massive charged gauge boson, $W'$, is performed with the ATLAS detector at the LHC. The dataset used in this analysis was collected from proton-proton collisions at a centre-of-mass energy of $\sqrt{s} =13$ TeV, and corresponds to an integrated luminosity of 139 fb$^{-1}$. The reconstructed $tb$ invariant mass is used to search for a $W'$ boson decaying into a top quark and a bottom quark. The result is interpreted in terms of a $W'$ boson with purely right-handed or left-handed chirality in a mass range of 0.5-6 TeV. Different values for the coupling of the $W'$ boson to the top and bottom quarks are considered, taking into account interference with single-top-quark production in the $s$-channel. No significant deviation from the background prediction is observed. The results are expressed as upper limits on the $W' \rightarrow tb$ production cross-section times branching ratio as a function of the $W'$-boson mass and in the plane of the coupling vs the $W'$-boson mass.
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <br><br> <b>Exclusion contours:</b> <ul> <li><a href="?table=contour_lh">$W^{\prime}_L$ exclusion contour</a> <li><a href="?table=contour_rh">$W^{\prime}_R$ exclusion contour</a> </ul> <b>Upper limits:</b> <ul> <li><a href="?table=limit_lh_gf05">$W^{\prime}_L$ $g^{\prime}/g$ = 0.5 upper limit</a> <li><a href="?table=limit_lh_gf10">$W^{\prime}_L$ $g^{\prime}/g$ = 1.0 upper limit</a> <li><a href="?table=limit_lh_gf20">$W^{\prime}_L$ $g^{\prime}/g$ = 2.0 upper limit</a> <li><a href="?table=limit_rh_gf05">$W^{\prime}_R$ $g^{\prime}/g$ = 0.5 upper limit</a> <li><a href="?table=limit_rh_gf10">$W^{\prime}_R$ $g^{\prime}/g$ = 1.0 upper limit</a> <li><a href="?table=limit_rh_gf20">$W^{\prime}_R$ $g^{\prime}/g$ = 2.0 upper limit</a> </ul> <b>Kinematic distributions:</b> <ul> <li><a href="?table=0l_sr1">0L channel Signal Region 1</a> <li><a href="?table=0l_sr2">0L channel Signal Region 2</a> <li><a href="?table=0l_sr3">0L channel Signal Region 3</a> <li><a href="?table=0l_vr">0L channel Validation Region</a> <li><a href="?table=1l_sr_2j1b">1L channel 2j1b Signal Region</a> <li><a href="?table=1l_sr_3j1b">1L channel 3j1b Signal Region</a> <li><a href="?table=1l_sr_2j2b">1L channel 2j2b Signal Region</a> <li><a href="?table=1l_sr_3j2b">1L channel 3j2b Signal Region</a> <li><a href="?table=1l_cr_2j1b">1L channel 2j1b Control Region</a> <li><a href="?table=1l_cr_3j1b">1L channel 3j1b Control Region</a> <li><a href="?table=1l_vr_2j1b">1L channel 2j1b Validation Region</a> <li><a href="?table=1l_vr_3j1b">1L channel 3j1b Validation Region</a> </ul> <b>Acceptance and efficiencies:</b> <ul> <li><a href="?table=acc_0l_lh_gf10">0L channel $W^{\prime}_L$ $g^{\prime}/g$ = 1.0 Acc. X Eff.</a> <li><a href="?table=acc_0l_lh_gf05">0L channel $W^{\prime}_L$ $g^{\prime}/g$ = 0.5 Acc. X Eff.</a> <li><a href="?table=acc_0l_lh_gf20">0L channel $W^{\prime}_L$ $g^{\prime}/g$ = 2.0 Acc. X Eff.</a> <li><a href="?table=acc_1l_lh_gf10">1L channel $W^{\prime}_L$ $g^{\prime}/g$ = 1.0 Acc. X Eff.</a> <li><a href="?table=acc_1l_lh_gf05">1L channel $W^{\prime}_L$ $g^{\prime}/g$ = 0.5 Acc. X Eff.</a> <li><a href="?table=acc_1l_lh_gf20">1L channel $W^{\prime}_L$ $g^{\prime}/g$ = 2.0 Acc. X Eff.</a> <li><a href="?table=acc_0l_rh_gf10">0L channel $W^{\prime}_R$ $g^{\prime}/g$ = 1.0 Acc. X Eff.</a> <li><a href="?table=acc_0l_rh_gf05">0L channel $W^{\prime}_R$ $g^{\prime}/g$ = 0.5 Acc. X Eff.</a> <li><a href="?table=acc_0l_rh_gf20">0L channel $W^{\prime}_R$ $g^{\prime}/g$ = 2.0 Acc. X Eff.</a> <li><a href="?table=acc_1l_rh_gf10">1L channel $W^{\prime}_R$ $g^{\prime}/g$ = 1.0 Acc. X Eff.</a> <li><a href="?table=acc_1l_rh_gf05">1L channel $W^{\prime}_R$ $g^{\prime}/g$ = 0.5 Acc. X Eff.</a> <li><a href="?table=acc_1l_rh_gf20">1L channel $W^{\prime}_R$ $g^{\prime}/g$ = 2.0 Acc. X Eff.</a> </ul>
Distribution (events/100 GeV) of the reconstructed $m_{tb}$ for data and backgrounds in the 0-lepton channel's signal region 1 after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Distribution (events/100 GeV) of the reconstructed $m_{tb}$ for data and backgrounds in the 0-lepton channel's signal region 2 after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Distribution (events/100 GeV) of the reconstructed $m_{tb}$ for data and backgrounds in the 0-lepton channel's the signal region 3 after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Distribution (events/100 GeV) of the reconstructed $m_{tb}$ for data and backgrounds in the 0-lepton channel's validation region before the fit to data. The systematics uncertainty is shown for the pre-fit background sum, including the background statistical uncertainty. The individual background components are obtained before the fit, too. There is also the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Reconstructed $m_{tb}$ distributions (events/50 GeV) for data and backgrounds in the 1-lepton channel's 2j1b signal region after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Reconstructed $m_{tb}$ distributions (events/50 GeV) for data and backgrounds in the 1-lepton channel's 3j1b signal region after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Reconstructed $m_{tb}$ distributions (events/50 GeV) for data and backgrounds in the 1-lepton channel's 2j2b signal region after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Reconstructed $m_{tb}$ distributions (events/50 GeV) for data and backgrounds in the 1-lepton channel's 3j2b signal region after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Reconstructed $m_{tb}$ distributions (events/50 GeV) for data and backgrounds in the 1-lepton channel's 2j1b control region after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Reconstructed $m_{tb}$ distributions (events/50 GeV) for data and backgrounds in the 1-lepton channel's 3j1b control region after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Reconstructed $m_{tb}$ distributions (events/50 GeV) for data and backgrounds in the 1-lepton channel's 2j1b validation region after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Reconstructed $m_{tb}$ distributions (events/50 GeV) for data and backgrounds in the 1-lepton channel's 3j1b validation region after the background-only fit to data. The systematics uncertainty is shown for the post-fit background sum, including the background statistical uncertainty. The individual background components are obtained after the fit, too. There are also the pre-fit background sum and the expected signal distribution. The distribution of the $W^{\prime}$ boson signal for a mass of 3 TeV is normalised to the predicted cross-section. The last bin in each distribution includes overflow.
Observed and expected 95% CL limits on the cross-section times branching ratio for the production of a $W^{\prime}$ boson with decay to tb and left-handed couplings as a function of the mass of the $W^{\prime}$ boson and a coupling value of $g^{\prime}/g$=0.5. The observed and expected limits are derived using a linear interpolation between simulated signal mass hypotheses. The uncertainty on the theory prediction includes components from factorisation and renormalisation scales, PDFs, the strong coupling constant, and the top-quark mass.
Observed and expected 95% CL limits on the cross-section times branching ratio for the production of a $W^{\prime}$ boson with decay to tb and left-handed couplings as a function of the mass of the $W^{\prime}$ boson and a coupling value of $g^{\prime}/g$=1.0. The observed and expected limits are derived using a linear interpolation between simulated signal mass hypotheses. The uncertainty on the theory prediction includes components from factorisation and renormalisation scales, PDFs, the strong coupling constant, and the top-quark mass.
Observed and expected 95% CL limits on the cross-section times branching ratio for the production of a $W^{\prime}$ boson with decay to tb and left-handed couplings as a function of the mass of the $W^{\prime}$ boson and a coupling value of $g^{\prime}/g$=2.0. The observed and expected limits are derived using a linear interpolation between simulated signal mass hypotheses. The uncertainty on the theory prediction includes components from factorisation and renormalisation scales, PDFs, the strong coupling constant, and the top-quark mass.
Observed and expected 95% CL limits on the cross-section times branching ratio for the production of a $W^{\prime}$ boson with decay to tb and right-handed couplings as a function of the mass of the $W^{\prime}$ boson and a coupling value of $g^{\prime}/g$=0.5. The observed and expected limits are derived using a linear interpolation between simulated signal mass hypotheses. The uncertainty on the theory prediction includes components from factorisation and renormalisation scales, PDFs, the strong coupling constant, and the top-quark mass.
Observed and expected 95% CL limits on the cross-section times branching ratio for the production of a $W^{\prime}$ boson with decay to tb and right-handed couplings as a function of the mass of the $W^{\prime}$ boson and a coupling value of $g^{\prime}/g$=1.0. The observed and expected limits are derived using a linear interpolation between simulated signal mass hypotheses. The uncertainty on the theory prediction includes components from factorisation and renormalisation scales, PDFs, the strong coupling constant, and the top-quark mass.
Observed and expected 95% CL limits on the cross-section times branching ratio for the production of a $W^{\prime}$ boson with decay to tb and right-handed couplings as a function of the mass of the $W^{\prime}$ boson and a coupling value of $g^{\prime}/g$=2.0. The observed and expected limits are derived using a linear interpolation between simulated signal mass hypotheses. The uncertainty on the theory prediction includes components from factorisation and renormalisation scales, PDFs, the strong coupling constant, and the top-quark mass.
95% CL limits on the coupling value ($g^{\prime}/g$) and the $W^{\prime}$-boson mass for left-handed $W^{\prime}$-boson couplings. The area above the line is excluded.
95% CL limits on the coupling value ($g^{\prime}/g$) and the $W^{\prime}$-boson mass for right-handed $W^{\prime}$-boson couplings. The area above the line is excluded.
The product of fiducial acceptance and selection efficiency for the three signal regions of the 0-lepton channel as a function of the mass of the $W^{\prime}$ boson with left-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=1$.
The product of fiducial acceptance and selection efficiency for the three signal regions of the 0-lepton channel as a function of the mass of the $W^{\prime}$ boson with left-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=0.5$.
The product of fiducial acceptance and selection efficiency for the three signal regions of the 0-lepton channel as a function of the mass of the $W^{\prime}$ boson with left-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=2$.
The product of fiducial acceptance and selection efficiency for the four signal regions of the 1-lepton channel as a function of the mass of the $W^{\prime}$ boson with left-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=1$.
The product of fiducial acceptance and selection efficiency for the four signal regions of the 1-lepton channel as a function of the mass of the $W^{\prime}$ boson with left-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=0.5$.
The product of fiducial acceptance and selection efficiency for the four signal regions of the 1-lepton channel as a function of the mass of the $W^{\prime}$ boson with left-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=2$.
The product of fiducial acceptance and selection efficiency for the three signal regions of the 0-lepton channel as a function of the mass of the $W^{\prime}$ boson with right-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=1$.
The product of fiducial acceptance and selection efficiency for the three signal regions of the 0-lepton channel as a function of the mass of the $W^{\prime}$ boson with right-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=0.5$.
The product of fiducial acceptance and selection efficiency for the three signal regions of the 0-lepton channel as a function of the mass of the $W^{\prime}$ boson with right-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=2$.
The product of fiducial acceptance and selection efficiency for the four signal regions of the 1-lepton channel as a function of the mass of the $W^{\prime}$ boson with right-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=1$.
The product of fiducial acceptance and selection efficiency for the four signal regions of the 1-lepton channel as a function of the mass of the $W^{\prime}$ boson with right-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=0.5$.
The product of fiducial acceptance and selection efficiency for the four signal regions of the 1-lepton channel as a function of the mass of the $W^{\prime}$ boson with right-handed chirality. The $W^{\prime}$ boson coupling strength is set to $g^{\prime}/g=2$.
A search for pair production of squarks or gluinos decaying via sleptons or weak bosons is reported. The search targets a final state with exactly two leptons with same-sign electric charge or at least three leptons without any charge requirement. The analysed data set corresponds to an integrated luminosity of 139 fb$^{-1}$ of proton$-$proton collisions collected at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC. Multiple signal regions are defined, targeting several SUSY simplified models yielding the desired final states. A single control region is used to constrain the normalisation of the $WZ$+jets background. No significant excess of events over the Standard Model expectation is observed. The results are interpreted in the context of several supersymmetric models featuring R-parity conservation or R-parity violation, yielding exclusion limits surpassing those from previous searches. In models considering gluino (squark) pair production, gluino (squark) masses up to 2.2 (1.7) TeV are excluded at 95% confidence level.
Observed exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Expected exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Observed exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Expected exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Observed exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Expected exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Observed exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Expected exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Observed exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Expected exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Observed exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Expected exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRGGWZ-H.
N-1 distribution for $E_{\mathrm{T}}^{\mathrm{miss}}$of observed data and expected background in SRGGSlep-M.
N-1 distribution for $\sum{p_{\mathrm{T}}^\mathrm{jet}}$of observed data and expected background in SRUDD-ge2b.
N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRLQD.
N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRSSWZ-H.
N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRSSSlep-H(loose).
Signal acceptance for SRGGWZ-H signal region from Fig 10(c) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGWZ-H signal region from Fig 15(c) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGWZ-M signal region from Fig 10(b) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGWZ-M signal region from Fig 15(b) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGWZ-L signal region from Fig 10(a) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGWZ-L signal region from Fig 15(a) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGSlep-L signal region from Fig 12(a) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGSlep-L signal region from Fig 17(a) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGSlep-M signal region from Fig 12(b) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGSlep-M signal region from Fig 17(b) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGSlep-H signal region from Fig 12(c) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGSlep-H signal region from Fig 17(c) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRUDD-1b signal region from Fig 14(b) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal efficiency for SRUDD-1b signal region from Fig 19(b) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal acceptance for SRUDD-2b signal region from Fig 14(c) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal efficiency for SRUDD-2b signal region from Fig 19(c) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal acceptance for SRUDD-ge2b signal region from Fig 14(d) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal efficiency for SRUDD-ge2b signal region from Fig 19(d) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal acceptance for SRUDD-ge3b signal region from Fig 14(e) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal efficiency for SRUDD-ge3b signal region from Fig 19(e) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal acceptance for SRLQD signal region from Fig 14(a) in a SUSY scenario where direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Signal efficiency for SRLQD signal region from Fig 19(a) in a SUSY scenario where direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Signal acceptance for SRSSWZ-L signal region from Fig 11(a) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSWZ-L signal region from Fig 16(a) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSWZ-ML signal region from Fig 11(b) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSWZ-ML signal region from Fig 16(b) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSWZ-MH signal region from Fig 11(c) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSWZ-MH signal region from Fig 16(c) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSWZ-H signal region from Fig 11(d) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSWZ-H signal region from Fig 16(d) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-H signal region from Fig 13(d) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-H signal region from Fig 18(d) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-MH signal region from Fig 13(c) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-MH signal region from Fig 18(c) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-L signal region from Fig 13(a) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-L signal region from Fig 18(a) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-ML signal region from Fig 13(b) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-ML signal region from Fig 18(b) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-H(loose) signal region from Fig 13(e) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-H(loose) signal region from Fig 18(e) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGWZ-H in a susy scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1000 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGWZ-M in a susy scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1000 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGWZ-L in a susy scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1000 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGSlep-L in a susy scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 500 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGSlep-M in a susy scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 500 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGSlep-H in a susy scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 500 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-1b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-2b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-ge2b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-ge3b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRLQD in a susy scenario where direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2200 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1870 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-L in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-ML in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-MH in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-H in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-H in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-MH in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-L in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-ML in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-H(loose) in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Cross-section upper limits at 95% CL from Fig1(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Cross-section upper limits at 95% CL from Fig1(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Cross-section upper limits at 95% CL from Fig1(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Cross-section upper limits at 95% CL from Fig1(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Cross-section upper limits at 95% CL from Fig1(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Cross-section upper limits at 95% CL from Fig1(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
A search is presented for a heavy resonance $Y$ decaying into a Standard Model Higgs boson $H$ and a new particle $X$ in a fully hadronic final state. The full Large Hadron Collider Run 2 dataset of proton-proton collisions at $\sqrt{s}= 13$ TeV collected by the ATLAS detector from 2015 to 2018 is used, and corresponds to an integrated luminosity of 139 fb$^{-1}$. The search targets the high $Y$-mass region, where the $H$ and $X$ have a significant Lorentz boost in the laboratory frame. A novel signal region is implemented using anomaly detection, where events are selected solely because of their incompatibility with a learned background-only model. It is defined using a jet-level tagger for signal-model-independent selection of the boosted $X$ particle, representing the first application of fully unsupervised machine learning to an ATLAS analysis. Two additional signal regions are implemented to target a benchmark $X$ decay into two quarks, covering topologies where the $X$ is reconstructed as either a single large-radius jet or two small-radius jets. The analysis selects Higgs boson decays into $b\bar{b}$, and a dedicated neural-network-based tagger provides sensitivity to the boosted heavy-flavor topology. No significant excess of data over the expected background is observed, and the results are presented as upper limits on the production cross section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) for signals with $m_Y$ between 1.5 and 6 TeV and $m_X$ between 65 and 3000 GeV.
Acceptance times efficiency for signal grid in anomaly signal region.
Acceptance times efficiency for signal grid in anomaly signal region.
Acceptance times efficiency for signal grid in merged two-prong signal region.
Acceptance times efficiency for signal grid in merged two-prong signal region.
Acceptance times efficiency for signal grid in resolved two-prong signal region.
Acceptance times efficiency for signal grid in resolved two-prong signal region.
The obtained p-value from comparing data to background estimation across all bins, defined by windows in the X and Y particle masses, in the anomaly signal region.
The obtained p-value from comparing data to background estimation across all bins, defined by windows in the X and Y particle masses, in the anomaly signal region.
The expected 95% CL limits on the cross-section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) in pb in the two-dimensional space of $m_Y$ versus $m_X$, obtained from a simultaneous fit of both merged and resolved two-prong signal regions with all statistical and systematic uncertainties.
The expected 95% CL limits on the cross-section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) in pb in the two-dimensional space of $m_Y$ versus $m_X$, obtained from a simultaneous fit of both merged and resolved two-prong signal regions with all statistical and systematic uncertainties.
The observed 95% CL limits on the cross-section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) in pb in the two-dimensional space of $m_Y$ versus $m_X$, obtained from a simultaneous fit of both merged and resolved two-prong signal regions with all statistical and systematic uncertainties.
The observed 95% CL limits on the cross-section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) in pb in the two-dimensional space of $m_Y$ versus $m_X$, obtained from a simultaneous fit of both merged and resolved two-prong signal regions with all statistical and systematic uncertainties.
A search for supersymmetry targeting the direct production of winos and higgsinos is conducted in final states with either two leptons ($e$ or $\mu$) with the same electric charge, or three leptons. The analysis uses 139 fb$^{-1}$ of $pp$ collision data at $\sqrt{s}=13$ TeV collected with the ATLAS detector during Run 2 of the Large Hadron Collider. No significant excess over the Standard Model expectation is observed. Simplified and complete models with and without $R$-parity conservation are considered. In topologies with intermediate states including either $Wh$ or $WZ$ pairs, wino masses up to 525 GeV and 250 GeV are excluded, respectively, for a bino of vanishing mass. Higgsino masses smaller than 440 GeV are excluded in a natural $R$-parity-violating model with bilinear terms. Upper limits on the production cross section of generic events beyond the Standard Model as low as 40 ab are obtained in signal regions optimised for these models and also for an $R$-parity-violating scenario with baryon-number-violating higgsino decays into top quarks and jets. The analysis significantly improves sensitivity to supersymmetric models and other processes beyond the Standard Model that may contribute to the considered final states.
Observed exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 13(b) and Fig 8(aux).
positive one $\sigma$ observed exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 13(b) and Fig 8(aux).
negative $\sigma$ variation of observed exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 13(b) and Fig 8(aux).
Observed excluded cross-section at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 8(aux).
Expected exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Observed exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from from Fig 13(a) and from Fig 7 and Fig 10(aux).
Observed excluded cross-section at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 7(aux) and Fig 10(aux).
positive one $\sigma$ observed exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from from Fig 13(a) and from Fig 7 and Fig 10(aux).
negative one $\sigma$ observed exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from from Fig 13(a) and from Fig 7 and Fig 10(aux).
Expected exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Expected exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Expected exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{bRPV}_{2l-SS}$. in a susy scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV, tan$\beta$=5. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{bRPV}_{3l}$. in a susy scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV, tan$\beta$=5. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{WZ}_{high-m_{T2}}$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 150 GeV, $m(\tilde{\chi}^{0} _{1})$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{WZ}_{low-m_{T2}}$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 150 GeV, $m(\tilde{\chi}^{0} _{1})$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the low mass $SR^{RPV}_{2l1b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the medium mass $SR^{RPV}_{2l1b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the low mass $SR^{RPV}_{2l2b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the medium mass $SR^{RPV}_{2l2b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the high mass $SR^{RPV}_{2l2b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the low mass $SR^{RPV}_{2l3b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the medium mass $SR^{RPV}_{2l3b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the high mass $SR^{RPV}_{2l3b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the $SR^{Wh}_{low-m_{T2} }$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Higgs bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 300 GeV, $m(\tilde{\chi}^{0} _{1})$ = 100 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the $SR^{Wh}_{high-m_{T2} }$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Higgs bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 300 GeV, $m(\tilde{\chi}^{0} _{1})$ = 100 GeV. Only statistical uncertainties are shown.
Signal Hepdataeptance for $SR^{bRPV}_{2l-SS}$ signal region from Fig 13(a)(aux) in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal Hepdataeptance for $SR^{bRPV}_{3l}$ signal region from Fig 13(b)(aux) in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal acceptance for $SR^{WZ}_{high-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal acceptance for $SR^{WZ}_{low-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal acceptance for $SR^{RPV}_{2l1b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l1b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l2b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l2b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l2b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l3b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l3b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l3b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{bRPV}_{2l-SS}$ signal region in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal efficiency for $SR^{bRPV}_{3l}$ signal region in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal efficiency for $SR^{WZ}_{high-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal efficiency for $SR^{WZ}_{low-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal efficiency for $SR^{RPV}_{2l1b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l1b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l2b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l2b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l2b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l3b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l3b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l3b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{Wh}_{high-m_{T2} }$ signal region from Fig 11(a)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Signal acceptance for $SR^{Wh}_{low-m_{T2} }$ signal region from Fig 11(b)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Signal efficiency for $SR^{Wh}_{high-m_{T2} }$ signal region from Fig 15(a)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Signal efficiency for $SR^{Wh}_{low-m_{T2} }$ signal region from Fig 15(b)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Observed 95% X-section upper limits as a function of higgsino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{1}/\tilde{\chi}^{0}_{2}$ mass in the bilinear RPV model from Fig 14.
Observed 95% X-section upper limits as a function of higgsino $\tilde{\chi}^{0}_{1}/\tilde{\chi}^{0}_{2}$ mass in the UDD RPV model from Fig 18.
Observed 95% X-section upper limits as a function of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ mass in the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 9(aux).
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{WZ}_{high-m_{T2}}$ from publication's Figure 11(a) . The last bin is inclusive.
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{WZ}_{low-m_{T2}}$ from publication's Figure 11(b) . The last bin is inclusive.
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{bRPV}_{2l-SS}$ from publication's Figure 11(c) . The last bin is inclusive.
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{bRPV}_{3l}$ from publication's Figure 11(d) . The last bin is inclusive.
N-1 distributions for $\sum p^{b-jet}_{T}/\sum p^{jet}_{T}$ of observed data and expected background towards $SR^{RPV}_{2l1b}-L$ from publication's Figure 16(a) . The last bin is inclusive.
N-1 distributions for $\sum p^{b-jet}_{T}/\sum p^{jet}_{T}$ of observed data and expected background towards $SR^{RPV}_{2l2b}-M$ from publication's Figure 16(b) . The last bin is inclusive.
N-1 distributions for $\sum p^{b-jet}_{T}/\sum p^{jet}_{T}$ of observed data and expected background towards $SR^{RPV}_{2l3b}-H$ from publication's Figure 16(c) . The last bin is inclusive.
N-1 distribution for $E_{T}^{miss}$ in $SR^{Wh}_{high-m_{T2} }$ in ee channel
N-1 distribution for $E_{T}^{miss}$ in $SR^{Wh}_{high-m_{T2} }$ in e$\mu$ channel
N-1 distribution for $E_{T}^{miss}$ in $SR^{Wh}_{high-m_{T2} }$ in $\mu\mu$ channel
N-1 distribution for $\mathcal{S}(E_{T}^{miss})$ in $SR^{Wh}_{low-m_{T2} }$ in ee channel
N-1 distribution for $\mathcal{S}(E_{T}^{miss})$ in $SR^{Wh}_{low-m_{T2} }$ in e$\mu$ channel
N-1 distribution for $\mathcal{S}(E_{T}^{miss})$ in $SR^{Wh}_{low-m_{T2} }$ in $\mu\mu$ channel
A search is presented for displaced production of Higgs bosons or $Z$ bosons, originating from the decay of a neutral long-lived particle (LLP) and reconstructed in the decay modes $H\rightarrow \gamma\gamma$ and $Z\rightarrow ee$. The analysis uses the full Run 2 data set of proton$-$proton collisions delivered by the LHC at an energy of $\sqrt{s}=13$ TeV between 2015 and 2018 and recorded by the ATLAS detector, corresponding to an integrated luminosity of 139 fb$^{-1}$. Exploiting the capabilities of the ATLAS liquid argon calorimeter to precisely measure the arrival times and trajectories of electromagnetic objects, the analysis searches for the signature of pairs of photons or electrons which arise from a common displaced vertex and which arrive after some delay at the calorimeter. The results are interpreted in a gauge-mediated supersymmetry breaking model with pair-produced higgsinos that decay to LLPs, and each LLP subsequently decays into either a Higgs boson or a $Z$ boson. The final state includes at least two particles that escape direct detection, giving rise to missing transverse momentum. No significant excess is observed above the background expectation. The results are used to set upper limits on the cross section for higgsino pair production, up to a $\tilde\chi^0_1$ mass of 369 (704) GeV for decays with 100% branching ratio of $\tilde\chi^0_1$ to Higgs ($Z$) bosons for a $\tilde\chi^0_1$ lifetime of 2 ns. A model-independent limit is also set on the production of pairs of photons or electrons with a significant delay in arrival at the calorimeter.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ branching ratio to the SM Higgs boson, where the assumed cross-section is for higgsino production, and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 - $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$). Several signal hypotheses are overlaid that are labelled by the $\tilde\chi^0_1$ mass, all with a fixed $\tilde\chi^0_1$ lifetime of 2 ns.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ branching ratio to the SM Higgs boson, where the assumed cross-section is for higgsino production, and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 - $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$). Several signal hypotheses are overlaid that are labelled by the $\tilde\chi^0_1$ mass, all with a fixed $\tilde\chi^0_1$ lifetime of 2 ns.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ branching ratio to the SM Higgs boson, where the assumed cross-section is for higgsino production, and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 - $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$). Several signal hypotheses are overlaid that are labelled by the $\tilde\chi^0_1$ mass, all with a fixed $\tilde\chi^0_1$ lifetime of 2 ns.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ branching ratio to the SM Higgs boson, where the assumed cross-section is for higgsino production, and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 - $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$). Several signal hypotheses are overlaid that are labelled by the $\tilde\chi^0_1$ mass, all with a fixed $\tilde\chi^0_1$ lifetime of 2 ns.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
Cutflow for an example higgsino signal with mass 225 GeV and lifetime 10 ns, in the H decay mode. Acceptance is defined at truth level, and efficiency compares the events passing at reconstruction level with respect to truth.
Cutflow for an example higgsino signal with mass 225 GeV and lifetime 10 ns, in the Z decay mode. Acceptance is defined at truth level, and efficiency compares the events passing at reconstruction level with respect to truth.
Cutflow for an example higgsino signal with mass 225 GeV and lifetime 2 ns, in the H decay mode. Acceptance is defined at truth level, and efficiency compares the events passing at reconstruction level with respect to truth.
Cutflow for an example higgsino signal with mass 225 GeV and lifetime 2 ns, in the Z decay mode. Acceptance is defined at truth level, and efficiency compares the events passing at reconstruction level with respect to truth.
Acceptance across the H decay mode signal grid, calculated using truth information. The selection applied corresponds to the model-independent signal region (i.e. the standard SR with $t_{\text{avg}$ > 0.9 ns).
Acceptance across the Z decay mode signal grid, calculated using truth information. The selection applied corresponds to the model-independent signal region (i.e. the standard SR with $t_{\text{avg}$ > 0.9 ns).
Efficiency across the H decay mode signal grid, calculated using reco information. The selection applied corresponds to the model-independent signal region (i.e. the standard SR with $t_{\text{avg}$ > 0.9 ns). Here, the numerator is the signal yield passing the reco selection and the denominator is the signal yield passing the truth selection.
Efficiency across the Z decay mode signal grid, calculated using reco information. The selection applied corresponds to the model-independent signal region (i.e. the standard SR with $t_{\text{avg}$ > 0.9 ns). Here, the numerator is the signal yield passing the reco selection and the denominator is the signal yield passing the truth selection.
A search for long-lived particles decaying into hadrons is presented. The analysis uses 139 fb$^{-1}$ of $pp$ collision data collected at $\sqrt{s} = 13$ TeV by the ATLAS detector at the LHC using events that contain multiple energetic jets and a displaced vertex. The search employs dedicated reconstruction techniques that significantly increase the sensitivity to long-lived particles decaying in the ATLAS inner detector. Background estimates for Standard Model processes and instrumental effects are extracted from data. The observed event yields are compatible with those expected from background processes. The results are used to set limits at 95% confidence level on model-independent cross sections for processes beyond the Standard Model, and on scenarios with pair-production of supersymmetric particles with long-lived electroweakinos that decay via a small $R$-parity-violating coupling. The pair-production of electroweakinos with masses below 1.5 TeV is excluded for mean proper lifetimes in the range from 0.03 ns to 1 ns. When produced in the decay of $m(\tilde{g})=2.4$ TeV gluinos, electroweakinos with $m(\tilde\chi^0_1)=1.5$ TeV are excluded with lifetimes in the range of 0.02 ns to 4 ns.
<b>Tables of Yields:</b> <a href="?table=validation_regions_yields_highpt_SR">Validation Regions Summary Yields, High-pT jet selections</a> <a href="?table=validation_regions_yields_trackless_SR">Validiation Regions Summary Yields, Trackless jet selections</a> <a href="?table=yields_highpt_SR_observed">Signal region (and sidebands) observed yields, High-pT jet selections</a> <a href="?table=yields_highpt_SR_expected">Signal region (and sidebands) expected yields, High-pT jet selections</a> <a href="?table=yields_trackless_SR_observed">Signal region (and sidebands) observed yields, Trackless jet selections</a> <a href="?table=yields_trackless_SR_expected">Signal region (and sidebands) expected yields, Trackless jet selections</a> <b>Exclusion Contours:</b> <a href="?table=excl_ewk_exp_nominal">EWK RPV signal; expected, nominal</a> <a href="?table=excl_ewk_exp_up">EWK RPV signal; expected, $+1\sigma$</a> <a href="?table=excl_ewk_exp_down">EWK RPV signal; expected, $-1\sigma$</a> <a href="?table=excl_ewk_obs_nominal">EWK RPV signal; observed, nominal</a> <a href="?table=excl_ewk_obs_up">EWK RPV signal; observed, $+1\sigma$</a> <a href="?table=excl_ewk_obs_down">EWK RPV signal; observed, $-1\sigma$</a> <a href="?table=excl_strong_mgluino_2400_GeV_exp_nominal">Strong RPV signal, m($\tilde{g}$)=2.4 TeV; expected, nominal</a> <a href="?table=excl_strong_mgluino_2400_GeV_exp_up">Strong RPV signal, m($\tilde{g}$)=2.4 TeV; expected, $+1\sigma$</a> <a href="?table=excl_strong_mgluino_2400_GeV_exp_down">Strong RPV signal, m($\tilde{g}$)=2.4 TeV; expected, $-1\sigma$</a> <a href="?table=excl_strong_mgluino_2400_GeV_obs_nominal">Strong RPV signal, m($\tilde{g}$)=2.4 TeV; observed, nominal</a> <a href="?table=excl_strong_mgluino_2400_GeV_obs_up">Strong RPV signal, m($\tilde{g}$)=2.4 TeV; observed, $+1\sigma$</a> <a href="?table=excl_strong_mgluino_2400_GeV_obs_down">Strong RPV signal, m($\tilde{g}$)=2.4 TeV; observed, $-1\sigma$</a> <a href="?table=excl_xsec_ewk">EWK RPV signal; cross-section limits for fixed lifetime values.</a> <a href="?table=excl_xsec_strong_mgluino_2400">Strong RPV signal, m($\tilde{g}$)=2.4 TeV; cross-section limits for fixed lifetime values.</a> <a href="?table=excl_strong_mgluino_2000_GeV_exp_nominal">Strong RPV signal, m($\tilde{g}$)=2.0 TeV; expected, nominal</a> <a href="?table=excl_strong_mgluino_2000_GeV_exp_up">Strong RPV signal, m($\tilde{g}$)=2.0 TeV; expected, $+1\sigma$</a> <a href="?table=excl_strong_mgluino_2000_GeV_exp_down">Strong RPV signal, m($\tilde{g}$)=2.0 TeV; expected, $-1\sigma$</a> <a href="?table=excl_strong_mgluino_2000_GeV_obs_nominal">Strong RPV signal, m($\tilde{g}$)=2.0 TeV; observed, nominal</a> <a href="?table=excl_strong_mgluino_2000_GeV_obs_up">Strong RPV signal, m($\tilde{g}$)=2.0 TeV; observed, $+1\sigma$</a> <a href="?table=excl_strong_mgluino_2000_GeV_obs_down">Strong RPV signal, m($\tilde{g}$)=2.0 TeV; observed, $-1\sigma$</a> <a href="?table=excl_strong_mgluino_2200_GeV_exp_nominal">Strong RPV signal, m($\tilde{g}$)=2.2 TeV; expected, nominal</a> <a href="?table=excl_strong_mgluino_2200_GeV_exp_up">Strong RPV signal, m($\tilde{g}$)=2.2 TeV; expected, $+1\sigma$</a> <a href="?table=excl_strong_mgluino_2200_GeV_exp_down">Strong RPV signal, m($\tilde{g}$)=2.2 TeV; expected, $-1\sigma$</a> <a href="?table=excl_strong_mgluino_2200_GeV_obs_nominal">Strong RPV signal, m($\tilde{g}$)=2.2 TeV; observed, nominal</a> <a href="?table=excl_strong_mgluino_2200_GeV_obs_up">Strong RPV signal, m($\tilde{g}$)=2.2 TeV; observed, $+1\sigma$</a> <a href="?table=excl_strong_mgluino_2200_GeV_obs_down">Strong RPV signal, m($\tilde{g}$)=2.2 TeV; observed, $-1\sigma$</a> <a href="?table=excl_strong_mchi0_50_GeV_exp_nominal">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.1 TeV; expected, nominal</a> <a href="?table=excl_strong_mchi0_50_GeV_exp_up">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.1 TeV; expected, $+1\sigma$</a> <a href="?table=excl_strong_mchi0_50_GeV_exp_down">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.1 TeV; expected, $-1\sigma$</a> <a href="?table=excl_strong_mchi0_50_GeV_obs_nominal">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.1 TeV; observed, nominal</a> <a href="?table=excl_strong_mchi0_50_GeV_obs_up">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.1 TeV; observed, $+1\sigma$</a> <a href="?table=excl_strong_mchi0_50_GeV_obs_down">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.1 TeV; observed, $-1\sigma$</a> <a href="?table=excl_strong_mchi0_450_GeV_exp_nominal">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.5 TeV; expected, nominal</a> <a href="?table=excl_strong_mchi0_450_GeV_exp_up">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.5 TeV; expected, $+1\sigma$</a> <a href="?table=excl_strong_mchi0_450_GeV_exp_down">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.5 TeV; expected, $-1\sigma$</a> <a href="?table=excl_strong_mchi0_450_GeV_obs_nominal">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.5 TeV; observed, nominal</a> <a href="?table=excl_strong_mchi0_450_GeV_obs_up">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.5 TeV; observed, $+1\sigma$</a> <a href="?table=excl_strong_mchi0_450_GeV_obs_down">Strong RPV signal, m($\tilde{\chi}^{0}$)=0.5 TeV; observed, $-1\sigma$</a> <a href="?table=excl_strong_tau_0p01_ns_exp_nominal">Strong RPV signal, $\tau$=0.01 ns; expected, nominal</a> <a href="?table=excl_strong_tau_0p01_ns_exp_up">Strong RPV signal, $\tau$=0.01 ns; expected, $+1\sigma$</a> <a href="?table=excl_strong_tau_0p01_ns_exp_down">Strong RPV signal, $\tau$=0.01 ns; expected, $-1\sigma$</a> <a href="?table=excl_strong_tau_0p01_ns_obs_nominal">Strong RPV signal, $\tau$=0.01 ns; observed, nominal</a> <a href="?table=excl_strong_tau_0p01_ns_obs_up">Strong RPV signal, $\tau$=0.01 ns; observed, $+1\sigma$</a> <a href="?table=excl_strong_tau_0p01_ns_obs_down">Strong RPV signal, $\tau$=0.01 ns; observed, $-1\sigma$</a> <a href="?table=excl_strong_tau_0p1_ns_exp_nominal">Strong RPV signal, $\tau$=0.10 ns; expected, nominal</a> <a href="?table=excl_strong_tau_0p1_ns_exp_up">Strong RPV signal, $\tau$=0.10 ns; expected, $+1\sigma$</a> <a href="?table=excl_strong_tau_0p1_ns_exp_down">Strong RPV signal, $\tau$=0.10 ns; expected, $-1\sigma$</a> <a href="?table=excl_strong_tau_0p1_ns_obs_nominal">Strong RPV signal, $\tau$=0.10 ns; observed, nominal</a> <a href="?table=excl_strong_tau_0p1_ns_obs_up">Strong RPV signal, $\tau$=0.10 ns; observed, $+1\sigma$</a> <a href="?table=excl_strong_tau_0p1_ns_obs_down">Strong RPV signal, $\tau$=0.10 ns; observed, $-1\sigma$</a> <a href="?table=excl_strong_tau_1_ns_exp_nominal">Strong RPV signal, $\tau$=1.00 ns; expected, nominal</a> <a href="?table=excl_strong_tau_1_ns_exp_up">Strong RPV signal, $\tau$=1.00 ns; expected, $+1\sigma$</a> <a href="?table=excl_strong_tau_1_ns_exp_down">Strong RPV signal, $\tau$=1.00 ns; expected, $-1\sigma$</a> <a href="?table=excl_strong_tau_1_ns_obs_nominal">Strong RPV signal, $\tau$=1.00 ns; observed, nominal</a> <a href="?table=excl_strong_tau_1_ns_obs_up">Strong RPV signal, $\tau$=1.00 ns; observed, $+1\sigma$</a> <a href="?table=excl_strong_tau_1_ns_obs_down">Strong RPV signal, $\tau$=1.00 ns; observed, $-1\sigma$</a> <a href="?table=excl_strong_tau_10_ns_exp_nominal">Strong RPV signal, $\tau$=10.00 ns; expected, nominal</a> <a href="?table=excl_strong_tau_10_ns_exp_up">Strong RPV signal, $\tau$=10.00 ns; expected, $+1\sigma$</a> <a href="?table=excl_strong_tau_10_ns_exp_down">Strong RPV signal, $\tau$=10.00 ns; expected, $-1\sigma$</a> <a href="?table=excl_strong_tau_10_ns_obs_nominal">Strong RPV signal, $\tau$=10.00 ns; observed, nominal</a> <a href="?table=excl_strong_tau_10_ns_obs_up">Strong RPV signal, $\tau$=10.00 ns; observed, $+1\sigma$</a> <a href="?table=excl_strong_tau_10_ns_obs_down">Strong RPV signal, $\tau$=10.00 ns; observed, $-1\sigma$</a> <a href="?table=excl_xsec_strong_chi0_1250">Strong RPV signal, m($\tilde{\chi}^0_1$)=1.25 TeV; cross-section limits for fixed lifetime values.</a> <br/><b>Reinterpretation Material:</b> See the attached resource (purple button on the left) or directly <a href="https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2016-08/hepdata_info.pdf">this link</a> for information about acceptance definition and about how to use the efficiency histograms below. SLHA files are also available in the reource page of this HEPData record. <a href="?table=acceptance_highpt_strong"> Acceptance cutflow, High-pT SR, Strong production.</a> <a href="?table=acceptance_trackless_ewk"> Acceptance cutflow, Trackless SR, EWK production.</a> <a href="?table=acceptance_trackless_ewk_hf"> Acceptance cutflow, Trackless SR, EWK production with heavy-flavor.</a> <a href="?table=acceptance_highpt_ewk_hf"> Acceptance cutflow, Trackless SR, EWK production with heavy-flavor.</a> <a href="?table=event_efficiency_HighPt_R_1150_mm">Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R < 1150 mm</a> <a href="?table=event_efficiency_HighPt_R_1150_3870_mm">Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R [1150, 3870] mm</a> <a href="?table=event_efficiency_HighPt_R_3870_mm">Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R > 3870 mm</a> <a href="?table=event_efficiency_Trackless_R_1150_mm">Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R < 1150 mm</a> <a href="?table=event_efficiency_Trackless_R_1150_3870_mm">Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R [1150, 3870] mm</a> <a href="?table=event_efficiency_Trackless_R_3870_mm">Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R > 3870 mm</a> <a href="?table=vertex_efficiency_R_22_mm">Reinterpretation Material: Vertex-level Efficiency for R < 22 mm</a> <a href="?table=vertex_efficiency_R_22_25_mm">Reinterpretation Material: Vertex-level Efficiency for R [22, 25] mm</a> <a href="?table=vertex_efficiency_R_25_29_mm">Reinterpretation Material: Vertex-level Efficiency for R [25, 29] mm</a> <a href="?table=vertex_efficiency_R_29_38_mm">Reinterpretation Material: Vertex-level Efficiency for R [29, 38] mm</a> <a href="?table=vertex_efficiency_R_38_46_mm">Reinterpretation Material: Vertex-level Efficiency for R [38, 46] mm</a> <a href="?table=vertex_efficiency_R_46_73_mm">Reinterpretation Material: Vertex-level Efficiency for R [46, 73] mm</a> <a href="?table=vertex_efficiency_R_73_84_mm">Reinterpretation Material: Vertex-level Efficiency for R [73, 84] mm</a> <a href="?table=vertex_efficiency_R_84_111_mm">Reinterpretation Material: Vertex-level Efficiency for R [84, 111] mm</a> <a href="?table=vertex_efficiency_R_111_120_mm">Reinterpretation Material: Vertex-level Efficiency for R [111, 120] mm</a> <a href="?table=vertex_efficiency_R_120_145_mm">Reinterpretation Material: Vertex-level Efficiency for R [120, 145] mm</a> <a href="?table=vertex_efficiency_R_145_180_mm">Reinterpretation Material: Vertex-level Efficiency for R [145, 180] mm</a> <a href="?table=vertex_efficiency_R_180_300_mm">Reinterpretation Material: Vertex-level Efficiency for R [180, 300] mm</a> <br/><b>Cutflow Tables:</b> <a href="?table=cutflow_highpt_strong"> Cutflow (Acceptance x Efficiency), High-pT SR, Strong production.</a> <a href="?table=cutflow_trackless_ewk"> Cutflow (Acceptance x Efficiency), Trackless SR, EWK production.</a> <a href="?table=cutflow_trackless_ewk_hf"> Cutflow (Acceptance x Efficiency), Trackless SR, EWK production with heavy-flavor quarks.</a> <a href="?table=cutflow_highpt_ewk_hf"> Cutflow (Acceptance x Efficiency), High-pT SR, EWK production with heavy-flavor quarks.</a>
Validation of background estimate in validation regions for the High-pT jet selections
Validation of background estimate in validation regions for the Trackless jet selections
Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for observed data events
Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for expected signal events in the strong gluino pair pair production model with m(gluino)=1.8 TeV, m(chi0)=0.2 TeV, tau(chi0)=0.1 ns
Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for observed data events
Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for expected signal events in the electroweak pair production model
Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Exclusion limits at 95% CL on the production cross section in the electroweak pair production model.
Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m(gluino)=2.4 TeV
Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m($ ilde{\chi}^0_1$)=1.25 TeV
Acceptance cutflow for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.
Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.
Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.
Acceptance cutflow for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.
Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R < 1150 mm
Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R [1150, 3870] mm
Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R > 3870 mm
Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R < 1150 mm
Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R [1150, 3870] mm
Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R > 3870 mm
Reinterpretation Material: Vertex-level Efficiency for R < 22 mm
Reinterpretation Material: Vertex-level Efficiency for R [22, 25] mm
Reinterpretation Material: Vertex-level Efficiency for R [25, 29] mm
Reinterpretation Material: Vertex-level Efficiency for R [29, 38] mm
Reinterpretation Material: Vertex-level Efficiency for R [38, 46] mm
Reinterpretation Material: Vertex-level Efficiency for R [46, 73] mm
Reinterpretation Material: Vertex-level Efficiency for R [73, 84] mm
Reinterpretation Material: Vertex-level Efficiency for R [84, 111] mm
Reinterpretation Material: Vertex-level Efficiency for R [111, 120] mm
Reinterpretation Material: Vertex-level Efficiency for R [120, 145] mm
Reinterpretation Material: Vertex-level Efficiency for R [145, 180] mm
Reinterpretation Material: Vertex-level Efficiency for R [180, 300] mm
Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.
Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.
Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.
Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.
This paper presents a search for dark matter, $\chi$, using events with a single top quark and an energetic $W$ boson. The analysis is based on proton-proton collision data collected with the ATLAS experiment at $\sqrt{s}=$ 13 TeV during LHC Run 2 (2015-2018), corresponding to an integrated luminosity of 139 fb$^{-1}$. The search considers final states with zero or one charged lepton (electron or muon), at least one $b$-jet and large missing transverse momentum. In addition, a result from a previous search considering two-charged-lepton final states is included in the interpretation of the results. The data are found to be in good agreement with the Standard Model predictions and the results are interpreted in terms of 95% confidence-level exclusion limits in the context of a class of dark matter models involving an extended two-Higgs-doublet sector together with a pseudoscalar mediator particle. The search is particularly sensitive to on-shell production of the charged Higgs boson state, $H^{\pm}$, arising from the two-Higgs-doublet mixing, and its semi-invisible decays via the mediator particle, $a$: $H^{\pm} \rightarrow W^\pm a (\rightarrow \chi\chi)$. Signal models with $H^{\pm}$ masses up to 1.5 TeV and $a$ masses up to 350 GeV are excluded assuming a tan$\beta$ value of 1. For masses of $a$ of 150 (250) GeV, tan$\beta$ values up to 2 are excluded for $H^{\pm}$ masses between 200 (400) GeV and 1.5 TeV. Signals with tan$\beta$ values between 20 and 30 are excluded for $H^{\pm}$ masses between 500 and 800 GeV.
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <br><br> <b>Exclusion contours:</b> <ul> <li><a href="?table=highst_mamh_obs">Combined sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=highst_mamh_exp">Combined sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=highst_mhtb_lowma_obs">Combined sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=highst_mhtb_lowma_exp">Combined sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=highst_mhtb_highma_obs">Combined sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=highst_mhtb_highma_exp">Combined sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=lowst_mamh_obs">Combined sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=lowst_mamh_exp">Combined sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=lowst_mhtb_lowma_obs">Combined sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=lowst_mhtb_lowma_exp">Combined sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=lowst_mhtb_highma_obs">Combined sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=lowst_mhtb_highma_exp">Combined sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=0LBoosted_highst_mamh_obs">0L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=0LBoosted_highst_mamh_exp">0L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=0LBoosted_highst_mhtb_lowma_obs">0L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=0LBoosted_highst_mhtb_lowma_exp">0L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=0LBoosted_highst_mhtb_highma_obs">0L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=0LBoosted_highst_mhtb_highma_exp">0L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=0LBoosted_lowst_mamh_obs">0L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=0LBoosted_lowst_mamh_exp">0L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=0LBoosted_lowst_mhtb_lowma_obs">0L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=0LBoosted_lowst_mhtb_lowma_exp">0L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=0LBoosted_lowst_mhtb_highma_obs">0L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=0LBoosted_lowst_mhtb_highma_exp">0L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=1LBoosted_highst_mamh_obs">1L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=1LBoosted_highst_mamh_exp">1L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=1LBoosted_highst_mhtb_lowma_obs">1L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=1LBoosted_highst_mhtb_lowma_exp">1L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=1LBoosted_highst_mhtb_highma_obs">1L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=1LBoosted_highst_mhtb_highma_exp">1L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=1LBoosted_lowst_mamh_obs">1L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=1LBoosted_lowst_mamh_exp">1L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=1LBoosted_lowst_mhtb_lowma_obs">1L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=1LBoosted_lowst_mhtb_lowma_exp">1L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=1LBoosted_lowst_mhtb_highma_exp">1L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=2L_highst_mamh_obs">2L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=2L_highst_mamh_exp">2L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=2L_highst_mhtb_lowma_obs">2L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=2L_highst_mhtb_lowma_exp">2L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=2L_highst_mhtb_highma_obs">2L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Obs.)</a> <li><a href="?table=2L_highst_mhtb_highma_exp">2L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=2L_lowst_mamh_exp">2L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=2L_lowst_mhtb_lowma_exp">2L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=2L_lowst_mhtb_highma_exp">2L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW signals (Exp.)</a> <li><a href="?table=highst_dmtt_mamh_obs">Combined sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=highst_dmtt_mamh_exp">Combined sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=highst_dmtt_mhtb_lowma_obs">Combined sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=highst_dmtt_mhtb_lowma_exp">Combined sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=highst_dmtt_mhtb_highma_obs">Combined sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=highst_dmtt_mhtb_highma_exp">Combined sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=lowst_dmtt_mamh_obs">Combined sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=lowst_dmtt_mamh_exp">Combined sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=lowst_dmtt_mhtb_lowma_obs">Combined sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=lowst_dmtt_mhtb_lowma_exp">Combined sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=lowst_dmtt_mhtb_highma_obs">Combined sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=lowst_dmtt_mhtb_highma_exp">Combined sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=0LBoosted_highst_dmtt_mamh_obs">0L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=0LBoosted_highst_dmtt_mamh_exp">0L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=0LBoosted_highst_dmtt_mhtb_lowma_obs">0L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=0LBoosted_highst_dmtt_mhtb_lowma_exp">0L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=0LBoosted_highst_dmtt_mhtb_highma_obs">0L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=0LBoosted_highst_dmtt_mhtb_highma_exp">0L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=0LBoosted_lowst_dmtt_mamh_obs">0L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=0LBoosted_lowst_dmtt_mamh_exp">0L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=0LBoosted_lowst_dmtt_mhtb_lowma_obs">0L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=0LBoosted_lowst_dmtt_mhtb_lowma_exp">0L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=0LBoosted_lowst_dmtt_mhtb_highma_obs">0L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=0LBoosted_lowst_dmtt_mhtb_highma_exp">0L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=1LBoosted_highst_dmtt_mamh_obs">1L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=1LBoosted_highst_dmtt_mamh_exp">1L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=1LBoosted_highst_dmtt_mhtb_lowma_obs">1L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=1LBoosted_highst_dmtt_mhtb_lowma_exp">1L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=1LBoosted_highst_dmtt_mhtb_highma_obs">1L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=1LBoosted_highst_dmtt_mhtb_highma_exp">1L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=1LBoosted_lowst_dmtt_mamh_obs">1L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=1LBoosted_lowst_dmtt_mamh_exp">1L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=1LBoosted_lowst_dmtt_mhtb_lowma_obs">1L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=1LBoosted_lowst_dmtt_mhtb_lowma_exp">1L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=1LBoosted_lowst_dmtt_mhtb_highma_obs">1L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=1LBoosted_lowst_dmtt_mhtb_highma_exp">1L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=2L_highst_dmtt_mamh_obs">2L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=2L_highst_dmtt_mamh_exp">2L channel sin$\theta$ = 0.7 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=2L_highst_dmtt_mhtb_lowma_obs">2L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=2L_highst_dmtt_mhtb_lowma_exp">2L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=2L_highst_dmtt_mhtb_highma_obs">2L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=2L_highst_dmtt_mhtb_highma_exp">2L channel sin$\theta$ = 0.7 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=2L_lowst_dmtt_mamh_exp">2L channel sin$\theta$ = 0.35 $m_a$-$m_{H^{\pm}}$ exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=2L_lowst_dmtt_mhtb_lowma_obs">2L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=2L_lowst_dmtt_mhtb_lowma_exp">2L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 150 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> <li><a href="?table=2L_lowst_dmtt_mhtb_highma_obs">2L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Obs.)</a> <li><a href="?table=2L_lowst_dmtt_mhtb_highma_exp">2L channel sin$\theta$ = 0.35 $m_{H^{\pm}}$-tan$\beta$ ($m_{a}$ = 250 GeV) exclusion contour using DMtW+DMtt signals (Exp.)</a> </ul> <b>Upper limits:</b> <ul> <li><a href="?table=mamH_xSecUpperLimit_Comb_st0p7">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.7) cross-sections from combined (0L+1L+2L) fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_Comb_st0p7">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.7) cross-sections from combined (0L+1L+2L) fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_Comb_st0p7">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.7) cross-sections from combined (0L+1L+2L) fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_Comb_st0p7_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM(sin$\theta$ = 0.7) cross-sections from combined (0L+1L+2L) fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_Comb_st0p7_DMtt">Observed upper limit on the 2HDM+a tW+DM +tt+DM (sin$\theta$ = 0.7) cross-sections from combined (0L+1L+2L) fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_Comb_st0p7_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM (sin$\theta$ = 0.7) cross-sections from combined (0L+1L+2L) fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_Comb_st0p35">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.35) cross-sections from combined (0L+1L+2L) fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_Comb_st0p35">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.35) cross-sections from combined (0L+1L+2L) fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_Comb_st0p35">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.35) cross-sections from combined (0L+1L+2L) fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_Comb_st0p35_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM(sin$\theta$ = 0.35) cross-sections from combined (0L+1L+2L) fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_Comb_st0p35_DMtt">Observed upper limit on the 2HDM+a tW+DM +tt+DM (sin$\theta$ = 0.35) cross-sections from combined (0L+1L+2L) fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_Comb_st0p35_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM (sin$\theta$ = 0.35) cross-sections from combined (0L+1L+2L) fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_0L_st0p7">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.7) cross-sections from 0L individual fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_0L_st0p7">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.7) cross-sections from 0L individual fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_0L_st0p7">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.7) cross-sections from 0L individual fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_0L_st0p7_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM(sin$\theta$ = 0.7) cross-sections from 0L individual fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_0L_st0p7_DMtt">Observed upper limit on the 2HDM+a tW+DM +tt+DM (sin$\theta$ = 0.7) cross-sections from 0L individual fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_0L_st0p7_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM (sin$\theta$ = 0.7) cross-sections from 0L individual fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_0L_st0p35">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.35) cross-sections from 0L individual fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_0L_st0p35">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.35) cross-sections from 0L individual fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_0L_st0p35">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.35) cross-sections from 0L individual fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_0L_st0p35_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM(sin$\theta$ = 0.35) cross-sections from 0L individual fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_0L_st0p35_DMtt">Observed upper limit on the 2HDM+a tW+DM +tt+DM (sin$\theta$ = 0.35) cross-sections from 0L individual fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_0L_st0p35_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM (sin$\theta$ = 0.35) cross-sections from 0L individual fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_1L_st0p7">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.7) cross-sections from 1L individual fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_1L_st0p7">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.7) cross-sections from 1L individual fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_1L_st0p7">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.7) cross-sections from 1L individual fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_1L_st0p7_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM(sin$\theta$ = 0.7) cross-sections from 1L individual fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_1L_st0p7_DMtt">Observed upper limit on the 2HDM+a tW+DM +tt+DM (sin$\theta$ = 0.7) cross-sections from 1L individual fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_1L_st0p7_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM (sin$\theta$ = 0.7) cross-sections from 1L individual fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_1L_st0p35">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.35) cross-sections from 1L individual fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_1L_st0p35">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.35) cross-sections from 1L individual fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_1L_st0p35">Observed upper limit on the 2HDM+a tW+DM (sin$\theta$ = 0.35) cross-sections from 1L individual fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mamH_xSecUpperLimit_1L_st0p35_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM(sin$\theta$ = 0.35) cross-sections from 1L individual fit in the $m_a$-$m_{H^{\pm}}$ plane.</a> <li><a href="?table=mHtblow_xSecUpperLimit_1L_st0p35_DMtt">Observed upper limit on the 2HDM+a tW+DM +tt+DM (sin$\theta$ = 0.35) cross-sections from 1L individual fit in the low $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> <li><a href="?table=mHtbhigh_xSecUpperLimit_1L_st0p35_DMtt">Observed upper limit on the 2HDM+a tW+DM + tt+DM (sin$\theta$ = 0.35) cross-sections from 1L individual fit in the high $m_a$ $m_{H^{\pm}}$-tan$\beta$ plane.</a> </ul> <b>Kinematic distributions:</b> <ul> <li><a href="?table=SR0L_mwtagged">0L region m(b1,W-tagged)</a> <li><a href="?table=SR0L_mtbmet">0L region m_{\mathrm{T}}^{\mathrm{b,E_{\mathrm{T}^{\mathrm{miss}}}}}</a> <li><a href="?table=SR0L_nwtagged">0L region N_{\mathrm{W-tagged}}</a> <li><a href="?table=SR1L_Had_mbj">1L hadronic top $m_{\mathrm{b1},\mathrm{\cancel{b1}}}$</a> <li><a href="?table=SR1L_Lep_mbj">1L leptonic top $m_{\mathrm{b1},\mathrm{\cancel{b1}}}$</a> <li><a href="?table=SR1L_Lep_nwtaggged">1L leptonic top region N_{\mathrm{W-tagged}}</a> </ul> <b>Cut flows:</b> <ul> <li><a href="?table=cutflow_SR0L">Cutflow of 4 signal points in the 0L regions.</a> <li><a href="?table=cutflow_SR1L_Had">Cutflow of 4 signal points in the 1L hadronic top regions.</a> <li><a href="?table=cutflow_SR1L_Lep">Cutflow of 4 signal points in the 1L leptonic top region.</a> </ul> <b>Acceptance and efficiencies:</b> <ul> <li> <b>highst_grid1_0L:</b> <a href="?table=highst_grid1_Acc_0L">Acceptance table of the 0L SRs in the $m_a$-$m_{H^{\pm}}$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and tan$\beta$ = 1.</a> <a href="?table=highst_grid1_Eff_0L">Efficiency table of the 0L SRs in the $m_a$-$m_{H^{\pm}}$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and tan$\beta$ = 1.</a> <li> <b>highst_grid2_0L:</b> <a href="?table=highst_grid2_Acc_0L">Acceptance table of the 0L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and $m_a$ = 150 GeV.</a> <a href="?table=highst_grid2_Eff_0L">Efficiency table of the 0L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and $m_a$ = 150 GeV.</a> <li> <b>highst_grid3_0L:</b> <a href="?table=highst_grid3_Acc_0L">Acceptance table of the 0L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and $m_a$ = 250 GeV.</a> <a href="?table=highst_grid3_Eff_0L">Efficiency table of the 0L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and $m_a$ = 250 GeV.</a> <li> <b>highst_grid1_1L:</b> <a href="?table=highst_grid1_Acc_1L">Acceptance table of the 1L SRs in the $m_a$-$m_{H^{\pm}}$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and tan$\beta$ = 1.</a> <a href="?table=highst_grid1_Eff_1L">Efficiency table of the 1L SRs in the $m_a$-$m_{H^{\pm}}$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and tan$\beta$ = 1.</a> <li> <b>highst_grid2_1L:</b> <a href="?table=highst_grid2_Acc_1L">Acceptance table of the 1L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and $m_a$ = 150 GeV.</a> <a href="?table=highst_grid2_Eff_1L">Efficiency table of the 1L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and $m_a$ = 150 GeV.</a> <li> <b>highst_grid3_1L:</b> <a href="?table=highst_grid3_Acc_1L">Acceptance table of the 1L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and $m_a$ = 250 GeV.</a> <a href="?table=highst_grid3_Eff_1L">Efficiency table of the 1L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.7, $m_{\chi}$ = 10 GeV and $m_a$ = 250 GeV.</a> <li> <b>lowst_grid1_0L:</b> <a href="?table=lowst_grid1_Acc_0L">Acceptance table of the 0L SRs in the $m_a$-$m_{H^{\pm}}$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and tan$\beta$ = 1.</a> <a href="?table=lowst_grid1_Eff_0L">Efficiency table of the 0L SRs in the $m_a$-$m_{H^{\pm}}$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and tan$\beta$ = 1.</a> <li> <b>lowst_grid2_0L:</b> <a href="?table=lowst_grid2_Acc_0L">Acceptance table of the 0L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and $m_a$ = 150 GeV.</a> <a href="?table=lowst_grid2_Eff_0L">Efficiency table of the 0L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and $m_a$ = 150 GeV.</a> <li> <b>lowst_grid3_0L:</b> <a href="?table=lowst_grid3_Acc_0L">Acceptance table of the 0L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and $m_a$ = 250 GeV.</a> <a href="?table=lowst_grid3_Eff_0L">Efficiency table of the 0L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and $m_a$ = 250 GeV.</a> <li> <b>lowst_grid1_1L:</b> <a href="?table=lowst_grid1_Acc_1L">Acceptance table of the 1L SRs in the $m_a$-$m_{H^{\pm}}$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and tan$\beta$ = 1.</a> <a href="?table=lowst_grid1_Eff_1L">Efficiency table of the 1L SRs in the $m_a$-$m_{H^{\pm}}$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and tan$\beta$ = 1.</a> <li> <b>lowst_grid2_1L:</b> <a href="?table=lowst_grid2_Acc_1L">Acceptance table of the 1L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and $m_a$ = 150 GeV.</a> <a href="?table=lowst_grid2_Eff_1L">Efficiency table of the 1L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and $m_a$ = 150 GeV.</a> <li> <b>lowst_grid3_1L:</b> <a href="?table=lowst_grid3_Acc_1L">Acceptance table of the 1L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and $m_a$ = 250 GeV.</a> <a href="?table=lowst_grid3_Eff_1L">Efficiency table of the 1L SRs in the $m_{H^{\pm}}$-tan$\beta$ plane for 2HDM+a signals with sin$\theta$ = 0.35, $m_{\chi}$ = 10 GeV and $m_a$ = 250 GeV.</a> </ul> <b>Truth Code snippets</b> are available under "Resources" (purple button on the left)
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
The distributions of $m_{\mathrm{b1},\mathrm{W-tagged}}$ in the 0L inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $m_{\mathrm{T}}^{\mathrm{b,E_{\mathrm{T}^{\mathrm{miss}}}}}$ in the 0L inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $N_{\mathrm{W-tagged}}$ in the 0L inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $m_{\mathrm{b1},\mathrm{\cancel{b1}}}$ in the hadronic top inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $m_{\mathrm{b1},\mathrm{\cancel{b1}}}$ in the leptonic top inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $m_{\mathrm{b1},\mathrm{\cancel{b1}}}$ in the leptonic top inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
Cutflow for the reference point $(\it{m}_{\mathrm{H^{\pm}}}, \it{m}_{a}, tan\beta, sin\theta )=$ (500,100,1,0.7) , (800,150,20,0.7), (600,250,30,0.7), (1000,400,1,0.7) in 0L regions. Results are shown including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$.
Cutflow for the reference point $(\it{m}_{\mathrm{H^{\pm}}}, \it{m}_{a}, tan\beta, sin\theta )=$ (500,100,1,0.7) , (800,150,20,0.7), (600,250,30,0.7), (1000,400,1,0.7) in 1L leptonic top regions. Results are shown including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$.
Cutflow for the reference point $(\it{m}_{\mathrm{H^{\pm}}}, \it{m}_{a}, tan\beta, sin\theta )=$ (500,100,1,0.7) , (800,150,20,0.7), (600,250,30,0.7), (1000,400,1,0.7) in 1L hadronic top regions. Results are shown including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$.
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
This paper presents a statistical combination of searches targeting final states with two top quarks and invisible particles, characterised by the presence of zero, one or two leptons, at least one jet originating from a $b$-quark and missing transverse momentum. The analyses are searches for phenomena beyond the Standard Model consistent with the direct production of dark matter in $pp$ collisions at the LHC, using 139 fb$^{-\text{1}}$ of data collected with the ATLAS detector at a centre-of-mass energy of 13 TeV. The results are interpreted in terms of simplified dark matter models with a spin-0 scalar or pseudoscalar mediator particle. In addition, the results are interpreted in terms of upper limits on the Higgs boson invisible branching ratio, where the Higgs boson is produced according to the Standard Model in association with a pair of top quarks. For scalar (pseudoscalar) dark matter models, with all couplings set to unity, the statistical combination extends the mass range excluded by the best of the individual channels by 50 (25) GeV, excluding mediator masses up to 370 GeV. In addition, the statistical combination improves the expected coupling exclusion reach by 14% (24%), assuming a scalar (pseudoscalar) mediator mass of 10 GeV. An upper limit on the Higgs boson invisible branching ratio of 0.38 (0.30$^{+\text{0.13}}_{-\text{0.09}}$) is observed (expected) at 95% confidence level.
Post-fit signal region yields for the tt0L-high and the tt0L-low analyses. The bottom panel shows the statistical significance of the difference between the SM prediction and the observed data in each region. '$t\bar{t}$ (other)' represents $t\bar{t}$ events without extra jets or events with extra light-flavour jets. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The total uncertainty in the SM expectation is represented with hatched bands and the expected distributions for selected signal models are shown as dashed lines.
Representative fit distribution in the signal region for the tt1L analysis: each bin of such distribution corresponds to a single SR included in the fit. 'Other' includes contributions from $t\bar{t}W$, $tZ$, $tWZ$ and $t\bar{t}$ (semileptonic) processes. The total uncertainty in the SM expectation is represented with hatched bands and the expected distributions for selected signal models are shown as dashed lines.
Representative fit distribution in the same flavour leptons signal region for the tt2L analysis: each bin of such distribution, starting from the red arrow, corresponds to a single SR included in the fit. 'FNP' includes the contribution from fake/non-prompt lepton background arising from jets (mainly $\pi/K$, heavy-flavour hadron decays and photon conversion) misidentified as leptons, estimated in a purely data-driven way. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The total uncertainty in the SM expectation is represented with hatched bands and the expected distributions for selected signal models are shown as dashed lines.
Summary of the total uncertainty in the background prediction for each SR of the tt0L-low, tt0L-high, tt1L and tt2L analysis channels in the statistical combination. Their dominant contributions are indicated by individual lines. Individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.
Exclusion limits for colour-neutral scalar mediator dark matter models as a function of the mediator mass $m(\phi)$ for a DM mass $m_{\chi} = 1$ GeV. Associated production of DM with both single top quarks ($tW$ and $tj$ channels) and top quark pairs is considered. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for each individual channel and their statistical combination.
Exclusion limits for colour-neutral pseudoscalar mediator dark matter models as a function of the mediator mass $m(a)$ for a DM mass $m_{\chi} = 1$ GeV. Associated production of DM with both single top quarks ($tW$ and $tj$ channels) and top quark pairs is considered. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for each individual channel and their statistical combination.
$E_{\text{T}}^{\text{miss}}$ distribution in SR0X for the tt0L-low analysis. The contributions from all SM backgrounds are shown after the profile likelihood simultaneous fit to all tt0L-low CRs, with the hatched bands representing the total uncertainty. The category '$t\bar{t}$ (other)' represents $t\bar{t}$ events without extra jets or events with extra light-flavour jets. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The expected distributions for selected signal models are shown as dashed lines. The overflow events are included in the last bin. The bottom panels show the ratio of the observed data to the total SM background prediction, with the hatched area representing the total uncertainty in the background prediction and the red arrows marking data outside the vertical-axis range.
$E_{\text{T}}^{\text{miss}}$ distribution in SRWX for the tt0L-low analysis. The contributions from all SM backgrounds are shown after the profile likelihood simultaneous fit to all tt0L-low CRs, with the hatched bands representing the total uncertainty. The category '$t\bar{t}$ (other)' represents $t\bar{t}$ events without extra jets or events with extra light-flavour jets. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The expected distributions for selected signal models are shown as dashed lines. The overflow events are included in the last bin. The bottom panels show the ratio of the observed data to the total SM background prediction, with the hatched area representing the total uncertainty in the background prediction and the red arrows marking data outside the vertical-axis range.
$E_{\text{T}}^{\text{miss}}$ distribution in SRTX for the tt0L-low analysis. The contributions from all SM backgrounds are shown after the profile likelihood simultaneous fit to all tt0L-low CRs, with the hatched bands representing the total uncertainty. The category '$t\bar{t}$ (other)' represents $t\bar{t}$ events without extra jets or events with extra light-flavour jets. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The expected distributions for selected signal models are shown as dashed lines. The overflow events are included in the last bin. The bottom panels show the ratio of the observed data to the total SM background prediction, with the hatched area representing the total uncertainty in the background prediction and the red arrows marking data outside the vertical-axis range.
Exclusion limits for colour-neutral scalar mediator dark matter models as a function of the mediator mass $m(\phi)$ for a DM mass $m_{\chi} = 1$ GeV. Associated production of DM with both single top quarks ($tW$ and $tj$ channels) and top quark pairs is considered. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the nominal cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for the tt0L-high and tt0L-low analyses and their statistical combination.
Exclusion limits for colour-neutral pseudoscalar mediator dark matter models as a function of the mediator mass $m(a)$ for a DM mass $m_{\chi} = 1$ GeV. Associated production of DM with both single top quarks ($tW$ and $tj$ channels) and top quark pairs is considered. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the nominal cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for the tt0L-high and tt0L-low analyses and their statistical combination.
Exclusion limits for colour-neutral scalar mediator dark matter models as a function of the mediator mass $m(\phi)$ for a DM mass $m_{\chi} = 1$ GeV. Only associated production of DM with top quark pairs is considered for this interpretation. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for each individual channel and their statistical combination.
Exclusion limits for colour-neutral pseudoscalar mediator dark matter models as a function of the mediator mass $m(a)$ for a DM mass $m_{\chi} = 1$ GeV. Only associated production of DM with top quark pairs is considered for this interpretation. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for each individual channel and their statistical combination.
Exclusion limits for colour-neutral scalar mediator dark matter models as a function of the mediator mass $m(\phi)$ for a DM mass $m_{\chi} = 1$ GeV. Only associated production of DM with top quark pairs is considered for this interpretation. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the nominal cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for the tt0L-high and tt0L-low analyses and their statistical combination.
Exclusion limits for colour-neutral pseudoscalar mediator dark matter models as a function of the mediator mass $m(a)$ for a DM mass $m_{\chi} = 1$ GeV. Only associated production of DM with top quark pairs is considered for this interpretation. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the nominal cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for the tt0L-high and tt0L-low analyses and their statistical combination.
Representative fit distribution in the different flavour leptons signal region for the tt2L analysis: each bin of such distribution, starting from the red arrow, corresponds to a single SR included in the fit. 'FNP' includes the contribution from fake/non-prompt lepton background arising from jets (mainly $\pi/K$, heavy-flavour hadron decays and photon conversion) misidentified as leptons, estimated in a purely data-driven way. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The total uncertainty in the SM expectation is represented with hatched bands and the expected distributions for selected signal models are shown as dashed lines.
Signal acceptance in SR0X, SRWX and SRTX for simplified DM+$t\bar{t}$ model, defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample.
Signal acceptance in SR0X, SRWX and SRTX for simplified DM+$tW$ model, defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample.
Signal acceptance in SR0X, SRWX and SRTX for simplified DM+$tj$ model, defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample.
Signal efficiency in SR0X, SRWX and SRTX for simplified DM+$t\bar{t}$ model, defined as the number of selected reconstructed events divided by the acceptance.
Signal efficiency in SR0X, SRWX and SRTX for simplified DM+$tW$ model, defined as the number of selected reconstructed events divided by the acceptance.
Signal efficiency in SR0X, SRWX and SRTX for simplified DM+$tj$ model, defined as the number of selected reconstructed events divided by the acceptance.
Cutflow for the reference point DM+$t\bar{t}$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 2045000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 2045000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 2045000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(a, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 400000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(a, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 400000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(a, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 400000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 120000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 120000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 120000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(a, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 100000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(a, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 100000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(a, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 100000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 169000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 169000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 169000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(a, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 140000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(a, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 140000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(a, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 140000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
A search for the electroweak production of pairs of charged sleptons or charginos decaying into two-lepton final states with missing transverse momentum is presented. Two simplified models of $R$-parity-conserving supersymmetry are considered: direct pair-production of sleptons ($\tilde{\ell}\tilde{\ell}$), with each decaying into a charged lepton and a $\tilde{\chi}_1^0$ neutralino, and direct pair-production of the lightest charginos $(\tilde{\chi}_1^\pm\tilde{\chi}_1^\mp)$, with each decaying into a $W$-boson and a $\tilde{\chi}_1^0$. The lightest neutralino ($\tilde{\chi}_1^0$) is assumed to be the lightest supersymmetric particle (LSP). The analyses target the experimentally challenging mass regions where $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and $m(\tilde{\chi}_1^\pm)-m(\tilde{\chi}_1^0)$ are close to the $W$-boson mass (`moderately compressed' regions). The search uses 139 fb$^{-1}$ of $\sqrt{s}=13$ TeV proton-proton collisions recorded by the ATLAS detector at the Large Hadron Collider. No significant excesses over the expected background are observed. Exclusion limits on the simplified models under study are reported in the ($\tilde{\ell},\tilde{\chi}_1^0$) and ($\tilde{\chi}_1^\pm,\tilde{\chi}_1^0$) mass planes at 95% confidence level (CL). Sleptons with masses up to 150 GeV are excluded at 95% CL for the case of a mass-splitting between sleptons and the LSP of 50 GeV. Chargino masses up to 140 GeV are excluded at 95% CL for the case of a mass-splitting between the chargino and the LSP down to about 100 GeV.
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <b>Title: </b><em>Search for direct pair production of sleptons and charginos decaying to two leptons and neutralinos with mass splittings near the $W$ boson mass in $\sqrt{s}=13$ TeV $pp$ collisions with the ATLAS detector</em> <b>Paper website:</b> <a href="https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2019-02/">SUSY-2019-02</a> <b>Exclusion contours</b> <ul><li><b>Sleptons:</b> <a href=?table=excl_comb_obs_nominal>Combined Observed Nominal</a> <a href=?table=excl_comb_obs_up>Combined Observed Up</a> <a href=?table=excl_comb_obs_down>Combined Observed Down</a> <a href=?table=excl_comb_exp_nominal>Combined Expected Nominal</a> <a href=?table=excl_comb_exp_up>Combined Expected Up</a> <a href=?table=excl_comb_exp_down>Combined Expected Down</a> <a href=?table=excl_comb_obs_nominal_dM>Combined Observed Nominal $(\Delta m)$</a> <a href=?table=excl_comb_obs_up_dM>Combined Observed Up $(\Delta m)$</a> <a href=?table=excl_comb_obs_down_dM>Combined Observed Down $(\Delta m)$</a> <a href=?table=excl_comb_exp_nominal_dM>Combined Expected Nominal $(\Delta m)$</a> <a href=?table=excl_comb_exp_up_dM>Combined Expected Up $(\Delta m)$</a> <a href=?table=excl_comb_exp_down_dM>Combined Expected Down $(\Delta m)$</a> <a href=?table=excl_ee_obs_nominal>$\tilde{e}_\mathrm{L,R}$ Observed Nominal</a> <a href=?table=excl_ee_exp_nominal>$\tilde{e}_\mathrm{L,R}$ Expected Nominal</a> <a href=?table=excl_eLeL_obs_nominal>$\tilde{e}_\mathrm{L}$ Observed Nominal</a> <a href=?table=excl_eLeL_exp_nominal>$\tilde{e}_\mathrm{L}$ Expected Nominal</a> <a href=?table=excl_eReR_obs_nominal>$\tilde{e}_\mathrm{R}$ Observed Nominal</a> <a href=?table=excl_eReR_exp_nominal>$\tilde{e}_\mathrm{R}$ Expected Nominal</a> <a href=?table=excl_ee_obs_nominal_dM>$\tilde{e}_\mathrm{L,R}$ Observed Nominal $(\Delta m)$</a> <a href=?table=excl_ee_exp_nominal_dM>$\tilde{e}_\mathrm{L,R}$ Expected Nominal $(\Delta m)$</a> <a href=?table=excl_eLeL_obs_nominal_dM>$\tilde{e}_\mathrm{L}$ Observed Nominal $(\Delta m)$</a> <a href=?table=excl_eLeL_exp_nominal_dM>$\tilde{e}_\mathrm{L}$ Expected Nominal $(\Delta m)$</a> <a href=?table=excl_eReR_obs_nominal_dM>$\tilde{e}_\mathrm{R}$ Observed Nominal $(\Delta m)$</a> <a href=?table=excl_eReR_exp_nominal_dM>$\tilde{e}_\mathrm{R}$ Expected Nominal $(\Delta m)$</a> <a href=?table=excl_mm_obs_nominal>$\tilde{\mu}_\mathrm{L,R}$ Observed Nominal</a> <a href=?table=excl_mm_exp_nominal>$\tilde{\mu}_\mathrm{L,R}$ Expected Nominal</a> <a href=?table=excl_mLmL_obs_nominal>$\tilde{\mu}_\mathrm{L}$ Observed Nominal</a> <a href=?table=excl_mLmL_exp_nominal>$\tilde{\mu}_\mathrm{L}$ Expected Nominal</a> <a href=?table=excl_mRmR_obs_nominal>$\tilde{\mu}_\mathrm{R}$ Observed Nominal</a> <a href=?table=excl_mRmR_exp_nominal>$\tilde{\mu}_\mathrm{R}$ Expected Nominal</a> <a href=?table=excl_mm_obs_nominal_dM>$\tilde{\mu}_\mathrm{L,R}$ Observed Nominal $(\Delta m)$</a> <a href=?table=excl_mm_exp_nominal_dM>$\tilde{\mu}_\mathrm{L,R}$ Expected Nominal $(\Delta m)$</a> <a href=?table=excl_mLmL_obs_nominal_dM>$\tilde{\mu}_\mathrm{L}$ Observed Nominal $(\Delta m)$</a> <a href=?table=excl_mLmL_exp_nominal_dM>$\tilde{\mu}_\mathrm{L}$ Expected Nominal $(\Delta m)$</a> <a href=?table=excl_mRmR_obs_nominal_dM>$\tilde{\mu}_\mathrm{R}$ Observed Nominal $(\Delta m)$</a> <a href=?table=excl_mRmR_exp_nominal_dM>$\tilde{\mu}_\mathrm{R}$ Expected Nominal $(\Delta m)$</a> <a href=?table=excl_comb_obs_nominal_SR0j>Combined Observed Nominal SR-0j</a> <a href=?table=excl_comb_exp_nominal_SR0j>Combined Expected Nominal SR-0j</a> <a href=?table=excl_comb_obs_nominal_SR1j>Combined Observed Nominal SR-1j</a> <a href=?table=excl_comb_exp_nominal_SR1j>Combined Expected Nominal SR-1j</a> <li><b>Charginos:</b> <a href=?table=excl_c1c1_obs_nominal>Observed Nominal</a> <a href=?table=excl_c1c1_obs_up>Observed Up</a> <a href=?table=excl_c1c1_obs_down>Observed Down</a> <a href=?table=excl_c1c1_exp_nominal>Expected Nominal</a> <a href=?table=excl_c1c1_exp_nominal>Expected Up</a> <a href=?table=excl_c1c1_exp_nominal>Expected Down</a> <a href=?table=excl_c1c1_obs_nominal_dM>Observed Nominal $(\Delta m)$</a> <a href=?table=excl_c1c1_obs_up_dM>Observed Up $(\Delta m)$</a> <a href=?table=excl_c1c1_obs_down_dM>Observed Down $(\Delta m)$</a> <a href=?table=excl_c1c1_exp_nominal_dM>Expected Nominal $(\Delta m)$</a> <a href=?table=excl_c1c1_exp_nominal_dM>Expected Up $(\Delta m)$</a> <a href=?table=excl_c1c1_exp_nominal_dM>Expected Down $(\Delta m)$</a> </ul> <b>Upper Limits</b> <ul><li><b>Sleptons:</b> <a href=?table=UL_slep>ULs</a> <li><b>Charginos:</b> <a href=?table=UL_c1c1>ULs</a> </ul> <b>Pull Plots</b> <ul><li><b>Sleptons:</b> <a href=?table=pullplot_slep>SRs summary plot</a> <li><b>Charginos:</b> <a href=?table=pullplot_c1c1>SRs summary plot</a> </ul> <b>Cutflows</b> <ul><li><b>Sleptons:</b> <a href=?table=Cutflow_slep_SR0j>Towards SR-0J</a> <a href=?table=Cutflow_slep_SR1j>Towards SR-1J</a> <li><b>Charginos:</b> <a href=?table=Cutflow_SRs>Towards SRs</a> </ul> <b>Acceptance and Efficiencies</b> <ul><li><b>Sleptons:</b> <a href=?table=Acceptance_SR0j_MT2_100_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_100_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_110_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_110_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_120_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_120_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_130_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_130_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_100_105>SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_100_105>SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_105_110>SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_105_110>SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_110_115>SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_110_115>SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_115_120>SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_115_120>SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_120_125>SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_125_130>SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_130_140>SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_130_140>SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ Efficiency</a> <a href=?table=Acceptance_SR0j_MT2_140_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR0j_MT2_140_infty>SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_100_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[100,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_100_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[100,\infty)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_110_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[110,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_110_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[110,\infty)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_120_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[120,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_120_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[120,\infty)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_130_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[130,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_130_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[130,\infty)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_100_105>SR-1j $m_{\mathrm{T2}}^{100} \in[100,105)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_100_105>SR-1j $m_{\mathrm{T2}}^{100} \in[100,105)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_105_110>SR-1j $m_{\mathrm{T2}}^{100} \in[105,110)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_105_110>SR-1j $m_{\mathrm{T2}}^{100} \in[105,110)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_110_115>SR-1j $m_{\mathrm{T2}}^{100} \in[110,115)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_110_115>SR-1j $m_{\mathrm{T2}}^{100} \in[110,115)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_115_120>SR-1j $m_{\mathrm{T2}}^{100} \in[115,120)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_115_120>SR-1j $m_{\mathrm{T2}}^{100} \in[115,120)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_120_125>SR-1j $m_{\mathrm{T2}}^{100} \in[120,125)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_125_130>SR-1j $m_{\mathrm{T2}}^{100} \in[125,130)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_130_140>SR-1j $m_{\mathrm{T2}}^{100} \in[130,140)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_130_140>SR-1j $m_{\mathrm{T2}}^{100} \in[130,140)$ Efficiency</a> <a href=?table=Acceptance_SR1j_MT2_140_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[140,\infty)$ Acceptance</a> <a href=?table=Efficiency_SR1j_MT2_140_infty>SR-1j $m_{\mathrm{T2}}^{100} \in[140,\infty)$ Efficiency</a> <li><b>Charginos:</b> <a href=?table=Acceptance_SR_DF_81_1_SF_77_1>SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ Acceptance</a> <a href=?table=Efficiency_SR_DF_81_1_SF_77_1>SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ Efficiency</a> <a href=?table=Acceptance_SR_DF_81_1>SR-DF BDT-signal$\in(0.81,1]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_81_1>SR-DF BDT-signal$\in(0.81,1]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_82_1>SR-DF BDT-signal$\in(0.82,1]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_82_1>SR-DF BDT-signal$\in(0.82,1]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_83_1>SR-DF BDT-signal$\in(0.83,1]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_83_1>SR-DF BDT-signal$\in(0.83,1]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_84_1>SR-DF BDT-signal$\in(0.84,1]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_84_1>SR-DF BDT-signal$\in(0.84,1]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_85_1>SR-DF BDT-signal$\in(0.85,1]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_85_1>SR-DF BDT-signal$\in(0.85,1]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_81_8125>SR-DF BDT-signal$\in(0.81,8125]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_81_8125>SR-DF BDT-signal$\in(0.81,8125]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_8125_815>SR-DF BDT-signal$\in(0.8125,815]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_8125_815>SR-DF BDT-signal$\in(0.8125,815]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_815_8175>SR-DF BDT-signal$\in(0.815,8175]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_815_8175>SR-DF BDT-signal$\in(0.815,8175]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_8175_82>SR-DF BDT-signal$\in(0.8175,82]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_8175_82>SR-DF BDT-signal$\in(0.8175,82]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_82_8225>SR-DF BDT-signal$\in(0.82,8225]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_82_8225>SR-DF BDT-signal$\in(0.82,8225]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_8225_825>SR-DF BDT-signal$\in(0.8225,825]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_8225_825>SR-DF BDT-signal$\in(0.8225,825]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_825_8275>SR-DF BDT-signal$\in(0.825,8275]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_825_8275>SR-DF BDT-signal$\in(0.825,8275]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_8275_83>SR-DF BDT-signal$\in(0.8275,83]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_8275_83>SR-DF BDT-signal$\in(0.8275,83]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_83_8325>SR-DF BDT-signal$\in(0.83,8325]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_83_8325>SR-DF BDT-signal$\in(0.83,8325]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_8325_835>SR-DF BDT-signal$\in(0.8325,835]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_8325_835>SR-DF BDT-signal$\in(0.8325,835]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_835_8375>SR-DF BDT-signal$\in(0.835,8375]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_835_8375>SR-DF BDT-signal$\in(0.835,8375]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_8375_84>SR-DF BDT-signal$\in(0.8375,84]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_8375_84>SR-DF BDT-signal$\in(0.8375,84]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_84_845>SR-DF BDT-signal$\in(0.85,845]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_84_845>SR-DF BDT-signal$\in(0.85,845]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_845_85>SR-DF BDT-signal$\in(0.845,85]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_845_85>SR-DF BDT-signal$\in(0.845,85]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_85_86>SR-DF BDT-signal$\in(0.85,86]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_85_86>SR-DF BDT-signal$\in(0.85,86]$ Efficiency</a> <a href=?table=Acceptance_SR_DF_86_1>SR-DF BDT-signal$\in(0.86,1]$ Acceptance</a> <a href=?table=Efficiency_SR_DF_86_1>SR-DF BDT-signal$\in(0.86,1]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_77_1>SR-SF BDT-signal$\in(0.77,1]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_77_1>SR-SF BDT-signal$\in(0.77,1]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_78_1>SR-SF BDT-signal$\in(0.78,1]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_78_1>SR-SF BDT-signal$\in(0.78,1]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_79_1>SR-SF BDT-signal$\in(0.79,1]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_79_1>SR-SF BDT-signal$\in(0.79,1]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_80_1>SR-SF BDT-signal$\in(0.80,1]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_80_1>SR-SF BDT-signal$\in(0.80,1]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_77_775>SR-SF BDT-signal$\in(0.77,0.775]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_77_775>SR-SF BDT-signal$\in(0.77,0.775]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_775_78>SR-SF BDT-signal$\in(0.775,0.78]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_775_78>SR-SF BDT-signal$\in(0.775,0.78]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_78_785>SR-SF BDT-signal$\in(0.78,0.785]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_78_785>SR-SF BDT-signal$\in(0.78,0.785]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_785_79>SR-SF BDT-signal$\in(0.785,0.79]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_785_79>SR-SF BDT-signal$\in(0.785,0.79]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_79_795>SR-SF BDT-signal$\in(0.79,0.795]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_79_795>SR-SF BDT-signal$\in(0.79,0.795]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_795_80>SR-SF BDT-signal$\in(0.795,0.80]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_795_80>SR-SF BDT-signal$\in(0.795,0.80]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_80_81>SR-SF BDT-signal$\in(0.80,0.81]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_80_81>SR-SF BDT-signal$\in(0.80,0.81]$ Efficiency</a> <a href=?table=Acceptance_SR_SF_81_1>SR-SF BDT-signal$\in(0.81,1]$ Acceptance</a> <a href=?table=Efficiency_SR_SF_81_1>SR-SF BDT-signal$\in(0.81,1]$ Efficiency</a></ul> <b>Truth Code snippets</b>, <b>SLHA</b> and <b>machine learning</b> files are available under "Resources" (purple button on the left)
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-0J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.
Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-1J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.
Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.
The upper panel shows the observed number of events in each of the binned SRs defined in Table 3, together with the expected SM backgrounds obtained after applying the efficiency correction method to compute the number of expected FSB events. `Others' include the non-dominant background sources, e.g. $t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. The distributions of two signal points with mass splittings $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 30$ GeV and $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 50$ GeV are overlaid. The lower panel shows the significance as defined in Ref. [115].
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
Cutflow table for the chargino signal sample with $m\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0=(125,25)$ GeV, in the SR-SF BDT-signal$\in (0.77,1]$ and SR-DF BDT-signal$\in (0.81,1]$ regions. The yields include the process cross-section and are weighted to the 139 fb$^{-1}$ luminosity. 170000 events were generated for the sample.
Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for chargino-pair production with $W$-boson-mediated decays in the $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ plane. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
The upper panel shows the observed number of events in the SRs defined in Table 3, together with the expected SM backgrounds obtained after the background fit in the CRs. `Others' include the non-dominant background sources, e.g.$t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. Distributions for three benchmark signal points are overlaid for comparison. The lower panel shows the significance as defined in Ref. [115].
A search for new phenomena has been performed in final states with at least one isolated high-momentum photon, jets and missing transverse momentum in proton--proton collisions at a centre-of-mass energy of $\sqrt{s} = 13$ TeV. The data, collected by the ATLAS experiment at the CERN LHC, correspond to an integrated luminosity of 139 $fb^{-1}$. The experimental results are interpreted in a supersymmetric model in which pair-produced gluinos decay into neutralinos, which in turn decay into a gravitino, at least one photon, and jets. No significant deviations from the predictions of the Standard Model are observed. Upper limits are set on the visible cross section due to physics beyond the Standard Model, and lower limits are set on the masses of the gluinos and neutralinos, all at 95% confidence level. Visible cross sections greater than 0.022 fb are excluded and pair-produced gluinos with masses up to 2200 GeV are excluded for most of the NLSP masses investigated.
The observed and expected (post-fit) yields in the control and validation regions. The lower panel shows the difference in standard deviations between the observed and expected yields, considering both the systematic and statistical uncertainties on the background expectation.
Observed (points with error bars) and expected background (solid histograms) distributions for $E_{T}^{miss}$ in the signal region (a) SRL, (b) SRM and (c) SRH after the background-only fit applied to the CRs. The predicted signal distributions for the two models with a gluino mass of 2000 GeV and neutralino mass of 250 GeV (SRL), 1050 GeV (SRM) or 1950 GeV (SRH) are also shown for comparison. The uncertainties in the SM background are only statistical.
Observed (points with error bars) and expected background (solid histograms) distributions for $E_{T}^{miss}$ in the signal region (a) SRL, (b) SRM and (c) SRH after the background-only fit applied to the CRs. The predicted signal distributions for the two models with a gluino mass of 2000 GeV and neutralino mass of 250 GeV (SRL), 1050 GeV (SRM) or 1950 GeV (SRH) are also shown for comparison. The uncertainties in the SM background are only statistical.
Observed (points with error bars) and expected background (solid histograms) distributions for $E_{T}^{miss}$ in the signal region (a) SRL, (b) SRM and (c) SRH after the background-only fit applied to the CRs. The predicted signal distributions for the two models with a gluino mass of 2000 GeV and neutralino mass of 250 GeV (SRL), 1050 GeV (SRM) or 1950 GeV (SRH) are also shown for comparison. The uncertainties in the SM background are only statistical.
Observed and expected exclusion limit in the gluino-neutralino mass plane at 95% CL combined using the signal region with the best expected sensitivity at each point, for the full Run-2 dataset corresponding to an integrated luminosity of $139~\mathrm{fb}^{-1}$, for $\gamma/Z$ (a) and $\gamma/h$ (b) signal models. The black solid line corresponds to the expected limits at 95% CL, with the light (yellow) bands indicating the 1$\sigma$ exclusions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves, the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties. For each point in the higgsino-bino parameter space, the labels indicate the best-expected signal region, where L, M and H mean SRL, SRM and SRH, respectively.
Observed and expected exclusion limit in the gluino-neutralino mass plane at 95% CL combined using the signal region with the best expected sensitivity at each point, for the full Run-2 dataset corresponding to an integrated luminosity of $139~\mathrm{fb}^{-1}$, for $\gamma/Z$ (a) and $\gamma/h$ (b) signal models. The black solid line corresponds to the expected limits at 95% CL, with the light (yellow) bands indicating the 1$\sigma$ exclusions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves, the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties. For each point in the higgsino-bino parameter space, the labels indicate the best-expected signal region, where L, M and H mean SRL, SRM and SRH, respectively.
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Cutflow for the SRL selection, for two relevant signal points for both $\gamma/Z$ and $\gamma/h$ models, where the gluinos have mass of 2000 GeV and the neutralinos have a mass of 250 GeV (10000 generated events). The numbers are normalized to a luminosity of 139 $fb^{-1}$.
Cutflow for the SRM selection, for two relevant signal points for both $\gamma/Z$ and $\gamma/h$ models, where the gluinos have mass of 2000 GeV and the neutralinos have a mass of 1050 GeV (10000 generated events). The numbers are normalized to a luminosity of 139 $fb^{-1}$.
Cutflow for the SRH selection, for two relevant signal points for both $\gamma/Z$ and $\gamma/h$ models, where the gluinos have mass of 2000 GeV and the neutralinos have a mass of 1950 GeV (10000 generated events). The numbers are normalized to a luminosity of 139 $fb^{-1}$.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
A search for new phenomena in final states with hadronically decaying tau leptons, $b$-jets, and missing transverse momentum is presented. The analyzed dataset comprises $pp$~collision data at a center-of-mass energy of $\sqrt s = 13$ TeV with an integrated luminosity of 139/fb, delivered by the Large Hadron Collider and recorded with the ATLAS detector from 2015 to 2018. The observed data are compatible with the expected Standard Model background. The results are interpreted in simplified models for two different scenarios. The first model is based on supersymmetry and considers pair production of top squarks, each of which decays into a $b$-quark, a neutrino and a tau slepton. Each tau slepton in turn decays into a tau lepton and a nearly massless gravitino. Within this model, top-squark masses up to 1.4 TeV can be excluded at the 95% confidence level over a wide range of tau-slepton masses. The second model considers pair production of leptoquarks with decays into third-generation leptons and quarks. Depending on the branching fraction into charged leptons, leptoquarks with masses up to around 1.25 TeV can be excluded at the 95% confidence level for the case of scalar leptoquarks and up to 1.8 TeV (1.5 TeV) for vector leptoquarks in a Yang--Mills (minimal-coupling) scenario. In addition, model-independent upper limits are set on the cross section of processes beyond the Standard Model.
Relative systematic uncertainties in the estimated number of background events in the signal regions. In the lower part of the table, a breakdown of the total uncertainty into different categories is given. For the multi-bin SR, the breakdown refers to the integral over all three $p_{\text{T}}(\tau)$ bins. As the individual uncertainties are correlated, they do not add in quadrature to equal the total background uncertainty.
Distributions of $m_{\text{T}2}(\tau_{1},\tau_{2})$ in the di-tau SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.
Distributions of $E_{\text{T}}^{\text{miss}}$ in the di-tau SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.
Distributions of $s_{\text{T}}$ in the single-tau one-bin SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.
Distributions of $m_{\text{T}}(\tau)$ in the single-tau one-bin SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.
Distributions of $\Sigma m_{\text{T}}(b_{1,2})$ in the single-tau $p_{\text{T}}(\tau)$-binned SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.
Distributions of $p_{\text{T}}(\tau)$ in the single-tau $p_{\text{T}}(\tau)$-binned SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.
Observed event yields in data ('Observed') and expected event yields for SM background processes obtained from the background-only fit ('Total bkg.' and rows below) in the signal regions of the di-tau and single-tau channels. The quoted uncertainties include both the statistical and systematic uncertainties and are truncated at zero yield. By construction, no $t\bar{t}$ (2 real $\tau$) events can pass the selections in the single-tau channel. As the individual uncertainties are correlated, they do not add in quadrature to equal the total background uncertainty.
From left to right: upper limits at the 95% confidence level (CL) on the visible cross section ($\sigma_\text{vis}$) and on the number of signal events ($S_{\text{obs}}^{95}$). The third column ($S_{\text{exp}}^{95}$) shows the upper limit at the 95% CL on the number of signal events, given the expected number (and $\pm 1\,\sigma$ excursions on the expectation) of background events. The last two columns indicate the confidence level observed for the background-only hypothesis ($\text{CL}_{b}$), the discovery $p$-value ($p(s=0)$) and the significance ($Z$). In the di-tau SR, where fewer events are observed than predicted by the fitted background estimate, the $p$-value is capped at 0.5.
Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for the minimal-coupling scenario. The limits are derived from the binned single-tau signal region.
Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for the minimal-coupling scenario. The limits are derived from the binned single-tau signal region.
Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for vector leptoquarks with additional gauge couplings. The limits are derived from the binned single-tau signal region.
Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for vector leptoquarks with additional gauge couplings. The limits are derived from the binned single-tau signal region.
Exclusion contours at the 95% confidence level for the stop-stau signal model as a function of the masses of the top squark $m(\tilde{t}_{1})$ and of the tau slepton $m(\tilde{\tau}_{1})$. Expected and observed limits are shown for the present search in comparison to observed limits from previous ATLAS analyses based on data from Run-1 of the LHC at $\sqrt{s} = 8$ TeV [Eur. Phys. J. C 76 (2016)] and on a partial dataset from Run 2 at $\sqrt{s} = 13$ TeV [Phys. Rev. D 98 (2018) 032008]. The green band indicates the limit on the mass of the tau slepton (for a massless LSP) from the LEP experiments.
Exclusion contours at the 95% confidence level for the stop-stau signal model as a function of the masses of the top squark $m(\tilde{t}_{1})$ and of the tau slepton $m(\tilde{\tau}_{1})$. Expected and observed limits are shown for the present search in comparison to observed limits from previous ATLAS analyses based on data from Run-1 of the LHC at $\sqrt{s} = 8$ TeV [Eur. Phys. J. C 76 (2016)] and on a partial dataset from Run 2 at $\sqrt{s} = 13$ TeV [Phys. Rev. D 98 (2018) 032008]. The green band indicates the limit on the mass of the tau slepton (for a massless LSP) from the LEP experiments.
Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{u}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for up-type leptoquarks $\text{LQ}_{3}^{\text{u}})$ with charge $+2/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.
Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{u}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for up-type leptoquarks $\text{LQ}_{3}^{\text{u}})$ with charge $+2/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.
Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{d}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for down-type leptoquarks $\text{LQ}_{3}^{\text{d}})$ with charge $-1/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.
Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{d}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for down-type leptoquarks $\text{LQ}_{3}^{\text{d}})$ with charge $-1/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.
Upper limits on the signal cross section at the 95 % confidence level for the stop-stau signal model.
Upper limits on the signal cross section at the 95 % confidence level for the scalar third-generation leptoquark signal model with up-type leptoquarks.
Upper limits on the signal cross section at the 95 % confidence level for the scalar third-generation leptoquark signal model with down-type leptoquarks.
Upper limits on the signal cross section at the 95 % confidence level for the vector third-generation leptoquark signal model with minimal coupling (MC).
Upper limits on the signal cross section at the 95 % confidence level for the vector third-generation leptoquark signal model with additional gauge couplings (YM).
Acceptance of the one-bin signal region of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.
Efficiency of the one-bin signal region of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.
Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.
Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.
Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the signal region of the di-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.
Efficiency of the signal region of the di-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the one-bin signal region of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.
Efficiency of the one-bin signal region of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.
Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.
Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.
Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the signal region of the di-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.
Efficiency of the signal region of the di-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.
Efficiency of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.
Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.
Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.
Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.
Efficiency of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.
Efficiency of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.
Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.
Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.
Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.
Efficiency of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.
Acceptance of the one-bin signal region of the single-tau channel for pair production of top squarks with decays via tau sleptons.
Efficiency of the one-bin signal region of the single-tau channel for pair production of top squarks with decays via tau sleptons.
Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.
Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.
Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.
Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.
Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of top squarks with decays via tau sleptons.
Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of top squarks with decays via tau sleptons.
Acceptance of the signal region of the di-tau channel for pair production of top squarks with decays via tau sleptons.
Efficiency of the signal region of the di-tau channel for pair production of top squarks with decays via tau sleptons.
Cutflow for the benchmark signal model $m(\tilde{t}_{1}) = 1350$ GeV, $m(\tilde{\tau}_{1}) = 1090$ GeV for the di-tau SR. The simulated sample contains 30,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.
Cutflow for the benchmark signal model $m(\tilde{t}_{1}) = 1350$ GeV, $m(\tilde{\tau}_{1}) = 1090$ GeV for the single-tau one-bin SR. The simulated sample contains 30,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
Cutflow for the benchmark signal model $m(\tilde{t}_{1}) = 1350$ GeV, $m(\tilde{\tau}_{1}) = 1090$ GeV for the single-tau multi-bin SR. The simulated sample contains 30,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{u}}) = 1.2$ TeV, $\beta = 0.5$ for the di-tau SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{u}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau one-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{u}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau multi-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{d}}) = 1.2$ TeV, $\beta = 0.5$ for the di-tau SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{d}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau one-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{d}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau multi-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the minimal-coupling scenario for the di-tau SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the minimal-coupling scenario for the single-tau one-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the minimal-coupling scenario for the single-tau multi-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the Yang--Mills scenario for the di-tau SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the Yang--Mills scenario for the single-tau one-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the Yang--Mills scenario for the single-tau multi-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.
A search for chargino$-$neutralino pair production in three-lepton final states with missing transverse momentum is presented. The study is based on a dataset of $\sqrt{s} = 13$ TeV $pp$ collisions recorded with the ATLAS detector at the LHC, corresponding to an integrated luminosity of 139 fb$^{-1}$. No significant excess relative to the Standard Model predictions is found in data. The results are interpreted in simplified models of supersymmetry, and statistically combined with results from a previous ATLAS search for compressed spectra in two-lepton final states. Various scenarios for the production and decay of charginos ($\tilde\chi^\pm_1$) and neutralinos ($\tilde\chi^0_2$) are considered. For pure higgsino $\tilde\chi^\pm_1\tilde\chi^0_2$ pair-production scenarios, exclusion limits at 95% confidence level are set on $\tilde\chi^0_2$ masses up to 210 GeV. Limits are also set for pure wino $\tilde\chi^\pm_1\tilde\chi^0_2$ pair production, on $\tilde\chi^0_2$ masses up to 640 GeV for decays via on-shell $W$ and $Z$ bosons, up to 300 GeV for decays via off-shell $W$ and $Z$ bosons, and up to 190 GeV for decays via $W$ and Standard Model Higgs bosons.
This is the HEPData space for the ATLAS SUSY EWK three-lepton search. The full resolution figures can be found at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2019-09/ The full statistical likelihoods have been provided for this analysis. They can be downloaded by clicking on the purple 'Resources' button above and selecting the 'Common Resources' category. <b>Region yields:</b> <ul display="inline-block"> <li><a href="?table=Tab%2012%20Onshell%20WZ%20Signal%20Region%20Yields%20Table">Tab 12 Onshell WZ Signal Region Yields Table</a> <li><a href="?table=Tab%2013%20Onshell%20Wh%20Signal%20Region%20Yields%20Table">Tab 13 Onshell Wh Signal Region Yields Table</a> <li><a href="?table=Tab%2014%20Offshell%20low-$E_{T}^{miss}$%20Signal%20Region%20Yields%20Table">Tab 14 Offshell low-$E_{T}^{miss}$ Signal Region Yields Table</a> <li><a href="?table=Tab%2015%20Offshell%20high-$E_{T}^{miss}$%20Signal%20Region%20Yields%20Table">Tab 15 Offshell high-$E_{T}^{miss}$ Signal Region Yields Table</a> <li><a href="?table=Tab%2020%20RJR%20Signal%20Region%20Yields%20Table">Tab 20 RJR Signal Region Yields Table</a> <li><a href="?table=Fig%204%20Onshell%20Control%20and%20Validation%20Region%20Yields">Fig 4 Onshell Control and Validation Region Yields</a> <li><a href="?table=Fig%208%20Offshell%20Control%20and%20Validation%20Region%20Yields">Fig 8 Offshell Control and Validation Region Yields</a> <li><a href="?table=Fig%2010%20Onshell%20WZ%20Signal%20Region%20Yields">Fig 10 Onshell WZ Signal Region Yields</a> <li><a href="?table=Fig%2011%20Onshell%20Wh%20Signal%20Region%20Yields">Fig 11 Onshell Wh Signal Region Yields</a> <li><a href="?table=Fig%2012%20Offshell%20Signal%20Region%20Yields">Fig 12 Offshell Signal Region Yields</a> <li><a href="?table=Fig%2018%20RJR%20Control%20and%20Validation%20Region%20Yields">Fig 18 RJR Control and Validation Region Yields</a> </ul> <b>Exclusion contours:</b> <ul display="inline-block"> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs">Fig 16a WZ Exclusion: Wino-bino(+), Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs_Up">Fig 16a WZ Exclusion: Wino-bino(+), Obs_Up</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs_Down">Fig 16a WZ Exclusion: Wino-bino(+), Obs_Down</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp">Fig 16a WZ Exclusion: Wino-bino(+), Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp_Up">Fig 16a WZ Exclusion: Wino-bino(+), Exp_Up</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp_Down">Fig 16a WZ Exclusion: Wino-bino(+), Exp_Down</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20compressed_Obs">Fig 16a WZ Exclusion: Wino-bino(+), compressed_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20compressed_Exp">Fig 16a WZ Exclusion: Wino-bino(+), compressed_Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20offshell_Obs">Fig 16a WZ Exclusion: Wino-bino(+), offshell_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20offshell_Exp">Fig 16a WZ Exclusion: Wino-bino(+), offshell_Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20onshell_Obs">Fig 16a WZ Exclusion: Wino-bino(+), onshell_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20onshell_Exp">Fig 16a WZ Exclusion: Wino-bino(+), onshell_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs_Up">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs_Down">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp_Up">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp_Down">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20compressed_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20compressed_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20offshell_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20offshell_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20onshell_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), onshell_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20onshell_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), onshell_Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs_Up">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs_Down">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp_Up">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp_Down">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20compressed_Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20compressed_Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20offshell_Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20offshell_Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs_Up">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs_Down">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp_Up">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp_Down">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20compressed_Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20compressed_Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20offshell_Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20offshell_Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs">Fig 17 Wh Exclusion, Obs</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs_Up">Fig 17 Wh Exclusion, Obs_Up</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs_Down">Fig 17 Wh Exclusion, Obs_Down</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp">Fig 17 Wh Exclusion, Exp</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp_Up">Fig 17 Wh Exclusion, Exp_Up</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp_Down">Fig 17 Wh Exclusion, Exp_Down</a> </ul> <b>Upper limits:</b> <ul display="inline-block"> <li><a href="?table=AuxFig%208a%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8a WZ Excl. Upper Limit Obs. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208b%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8b WZ Excl. Upper Limit Exp. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208c%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8c WZ Excl. Upper Limit Obs. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208d%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8d WZ Excl. Upper Limit Exp. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208e%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(-)%20($\Delta%20m$)">AuxFig 8e WZ Excl. Upper Limit Obs. Wino-bino(-) ($\Delta m$)</a> <li><a href="?table=AuxFig%208f%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(-)%20($\Delta%20m$)">AuxFig 8f WZ Excl. Upper Limit Exp. Wino-bino(-) ($\Delta m$)</a> <li><a href="?table=AuxFig%208g%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Higgsino%20($\Delta%20m$)">AuxFig 8g WZ Excl. Upper Limit Obs. Higgsino ($\Delta m$)</a> <li><a href="?table=AuxFig%208h%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Higgsino%20($\Delta%20m$)">AuxFig 8h WZ Excl. Upper Limit Exp. Higgsino ($\Delta m$)</a> <li><a href="?table=AuxFig%209a%20Wh%20Excl.%20Upper%20Limit%20Obs.">AuxFig 9a Wh Excl. Upper Limit Obs.</a> <li><a href="?table=AuxFig%209b%20Wh%20Excl.%20Upper%20Limit%20Exp.">AuxFig 9b Wh Excl. Upper Limit Exp.</a> </ul> <b>Model-independent discovery fits:</b> <ul display="inline-block"> <li><a href="?table=Tab%2018%20Onshell%20Discovery%20Fit%20Table">Tab 18 Onshell Discovery Fit Table</a> <li><a href="?table=Tab%2019%20Offshell%20Discovery%20Fit%20Table">Tab 19 Offshell Discovery Fit Table</a> <li><a href="?table=Tab%2021%20RJR%20Discovery%20Fit%20Table">Tab 21 RJR Discovery Fit Table</a> </ul> <b>Kinematic distributions:</b> <ul display="inline-block"> <li><a href="?table=Fig%2013a%20SR$_{DFOS}^{Wh}$-1%20($\Delta%20R_{OS,%20near}$)">Fig 13a SR$_{DFOS}^{Wh}$-1 ($\Delta R_{OS, near}$)</a> <li><a href="?table=Fig%2013b%20SR$_{DFOS}^{Wh}$-2%20(3rd%20Lep.%20$p_{T}$)">Fig 13b SR$_{DFOS}^{Wh}$-2 (3rd Lep. $p_{T}$)</a> <li><a href="?table=Fig%2013c%20SR$_{0j}^{WZ}$%20($E_{T}^{miss}$)">Fig 13c SR$_{0j}^{WZ}$ ($E_{T}^{miss}$)</a> <li><a href="?table=Fig%2013d%20SR$_{0j}^{WZ}$%20($m_{T}$)">Fig 13d SR$_{0j}^{WZ}$ ($m_{T}$)</a> <li><a href="?table=Fig%2014a%20SR$^{offWZ}_{LowETmiss}$-0j%20($m_{T}^{minmll}$)">Fig 14a SR$^{offWZ}_{LowETmiss}$-0j ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014b%20SR$^{offWZ}_{LowETmiss}$-nj%20($m_{T}^{minmll}$)">Fig 14b SR$^{offWZ}_{LowETmiss}$-nj ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014c%20SR$^{offWZ}_{HighETmiss}$-0j%20($m_{T}^{minmll}$)">Fig 14c SR$^{offWZ}_{HighETmiss}$-0j ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014d%20SR$^{offWZ}_{HighETmiss}$-nj%20($p_T^l%20\div%20E_T^{miss}$)">Fig 14d SR$^{offWZ}_{HighETmiss}$-nj ($p_T^l \div E_T^{miss}$)</a> <li><a href="?table=Fig%2020a%20RJR%20SR3$\ell$-Low%20($p_{T}^{\ell%201}$)">Fig 20a RJR SR3$\ell$-Low ($p_{T}^{\ell 1}$)</a> <li><a href="?table=Fig%2020b%20RJR%20SR3$\ell$-Low%20($H_{3,1}^{PP}$)">Fig 20b RJR SR3$\ell$-Low ($H_{3,1}^{PP}$)</a> <li><a href="?table=Fig%2020c%20RJR%20SR3$\ell$-ISR%20($p_{T~ISR}^{CM}$)">Fig 20c RJR SR3$\ell$-ISR ($p_{T~ISR}^{CM}$)</a> <li><a href="?table=Fig%2020d%20RJR%20SR3$\ell$-ISR%20($R_{ISR}$)">Fig 20d RJR SR3$\ell$-ISR ($R_{ISR}$)</a> </ul> <b>Cutflows:</b> <ul display="inline-block"> <li><a href="?table=AuxTab%205%20Cutflow:%20Onshell%20WZ">AuxTab 5 Cutflow: Onshell WZ</a> <li><a href="?table=AuxTab%206%20Cutflow:%20Onshell%20Wh">AuxTab 6 Cutflow: Onshell Wh</a> <li><a href="?table=AuxTab%207%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(250,235)">AuxTab 7 Cutflow: Offshell Wino-bino(+) (250,235)</a> <li><a href="?table=AuxTab%208%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(125,85)">AuxTab 8 Cutflow: Offshell Wino-bino(+) (125,85)</a> <li><a href="?table=AuxTab%209%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(250,170)">AuxTab 9 Cutflow: Offshell Wino-bino(+) (250,170)</a> <li><a href="?table=AuxTab%2010%20Cutflow:%20Offshell%20Wino-bino(-)%20(250,235)">AuxTab 10 Cutflow: Offshell Wino-bino(-) (250,235)</a> <li><a href="?table=AuxTab%2011%20Cutflow:%20Offshell%20Wino-bino(-)%20(125,85)">AuxTab 11 Cutflow: Offshell Wino-bino(-) (125,85)</a> <li><a href="?table=AuxTab%2012%20Cutflow:%20Offshell%20Wino-bino(-)%20(250,170)">AuxTab 12 Cutflow: Offshell Wino-bino(-) (250,170)</a> <li><a href="?table=AuxTab%2013%20Cutflow:%20Offshell%20Higgsino%20(120,100)">AuxTab 13 Cutflow: Offshell Higgsino (120,100)</a> <li><a href="?table=AuxTab%2014%20Cutflow:%20Offshell%20Higgsino%20(100,40)">AuxTab 14 Cutflow: Offshell Higgsino (100,40)</a> <li><a href="?table=AuxTab%2015%20Cutflow:%20Offshell%20Higgsino%20(185,125)">AuxTab 15 Cutflow: Offshell Higgsino (185,125)</a> </ul> <b>Acceptances and Efficiencies:</b> <ul display="inline-block"> <li><a href="?table=AuxFig%2010a%20Acc:%20Onshell%20SR$_{0j}^{WZ}$">AuxFig 10a Acc: Onshell SR$_{0j}^{WZ}$</a> <li><a href="?table=AuxFig%2010b%20Eff:%20Onshell%20SR$_{0j}^{WZ}$">AuxFig 10b Eff: Onshell SR$_{0j}^{WZ}$</a> <li><a href="?table=AuxFig%2010c%20Acc:%20Onshell%20SR$_{nj}^{WZ}$">AuxFig 10c Acc: Onshell SR$_{nj}^{WZ}$</a> <li><a href="?table=AuxFig%2010d%20Eff:%20Onshell%20SR$_{nj}^{WZ}$">AuxFig 10d Eff: Onshell SR$_{nj}^{WZ}$</a> <li><a href="?table=AuxFig%2011a%20Acc:%20Onshell%20SR$_{low-m_{ll}-0j}^{Wh}$">AuxFig 11a Acc: Onshell SR$_{low-m_{ll}-0j}^{Wh}$</a> <li><a href="?table=AuxFig%2011b%20Eff:%20Onshell%20SR$_{low-m_{ll}-0j}^{Wh}$">AuxFig 11b Eff: Onshell SR$_{low-m_{ll}-0j}^{Wh}$</a> <li><a href="?table=AuxFig%2011c%20Acc:%20Onshell%20SR$_{low-m_{ll}-nj}^{Wh}$">AuxFig 11c Acc: Onshell SR$_{low-m_{ll}-nj}^{Wh}$</a> <li><a href="?table=AuxFig%2011d%20Eff:%20Onshell%20SR$_{low-m_{ll}-nj}^{Wh}$">AuxFig 11d Eff: Onshell SR$_{low-m_{ll}-nj}^{Wh}$</a> <li><a href="?table=AuxFig%2011e%20Acc:%20Onshell%20SR$_{DFOS}^{Wh}$">AuxFig 11e Acc: Onshell SR$_{DFOS}^{Wh}$</a> <li><a href="?table=AuxFig%2011f%20Eff:%20Onshell%20SR$_{DFOS}^{Wh}$">AuxFig 11f Eff: Onshell SR$_{DFOS}^{Wh}$</a> <li><a href="?table=AuxFig%2012a%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 12a Acc: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2012b%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 12b Eff: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2012c%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 12c Acc: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2012d%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 12d Eff: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2012e%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 12e Acc: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2012f%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 12f Eff: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2012g%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 12g Acc: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2012h%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 12h Eff: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2013a%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 13a Acc: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2013b%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 13b Eff: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2013c%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 13c Acc: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2013d%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 13d Eff: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2013e%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 13e Acc: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2013f%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 13f Eff: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2013g%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 13g Acc: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2013h%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 13h Eff: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2014a%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 14a Acc: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2014b%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 14b Eff: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2014c%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 14c Acc: Off. Higgsino SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2014d%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 14d Eff: Off. Higgsino SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2014e%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 14e Acc: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2014f%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 14f Eff: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2014g%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 14g Acc: Off. Higgsino SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2014h%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 14h Eff: Off. Higgsino SR$^{offWZ}_{highETmiss}$-nj</a> </ul>
This is the HEPData space for the ATLAS SUSY EWK three-lepton search. The full resolution figures can be found at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2019-09/ The full statistical likelihoods have been provided for this analysis. They can be downloaded by clicking on the purple 'Resources' button above and selecting the 'Common Resources' category. <b>Region yields:</b> <ul display="inline-block"> <li><a href="?table=Tab%2012%20Onshell%20WZ%20Signal%20Region%20Yields%20Table">Tab 12 Onshell WZ Signal Region Yields Table</a> <li><a href="?table=Tab%2013%20Onshell%20Wh%20Signal%20Region%20Yields%20Table">Tab 13 Onshell Wh Signal Region Yields Table</a> <li><a href="?table=Tab%2014%20Offshell%20low-$E_{T}^{miss}$%20Signal%20Region%20Yields%20Table">Tab 14 Offshell low-$E_{T}^{miss}$ Signal Region Yields Table</a> <li><a href="?table=Tab%2015%20Offshell%20high-$E_{T}^{miss}$%20Signal%20Region%20Yields%20Table">Tab 15 Offshell high-$E_{T}^{miss}$ Signal Region Yields Table</a> <li><a href="?table=Tab%2020%20RJR%20Signal%20Region%20Yields%20Table">Tab 20 RJR Signal Region Yields Table</a> <li><a href="?table=Fig%204%20Onshell%20Control%20and%20Validation%20Region%20Yields">Fig 4 Onshell Control and Validation Region Yields</a> <li><a href="?table=Fig%208%20Offshell%20Control%20and%20Validation%20Region%20Yields">Fig 8 Offshell Control and Validation Region Yields</a> <li><a href="?table=Fig%2010%20Onshell%20WZ%20Signal%20Region%20Yields">Fig 10 Onshell WZ Signal Region Yields</a> <li><a href="?table=Fig%2011%20Onshell%20Wh%20Signal%20Region%20Yields">Fig 11 Onshell Wh Signal Region Yields</a> <li><a href="?table=Fig%2012%20Offshell%20Signal%20Region%20Yields">Fig 12 Offshell Signal Region Yields</a> <li><a href="?table=Fig%2018%20RJR%20Control%20and%20Validation%20Region%20Yields">Fig 18 RJR Control and Validation Region Yields</a> </ul> <b>Exclusion contours:</b> <ul display="inline-block"> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs">Fig 16a WZ Exclusion: Wino-bino(+), Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs_Up">Fig 16a WZ Exclusion: Wino-bino(+), Obs_Up</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs_Down">Fig 16a WZ Exclusion: Wino-bino(+), Obs_Down</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp">Fig 16a WZ Exclusion: Wino-bino(+), Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp_Up">Fig 16a WZ Exclusion: Wino-bino(+), Exp_Up</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp_Down">Fig 16a WZ Exclusion: Wino-bino(+), Exp_Down</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20compressed_Obs">Fig 16a WZ Exclusion: Wino-bino(+), compressed_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20compressed_Exp">Fig 16a WZ Exclusion: Wino-bino(+), compressed_Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20offshell_Obs">Fig 16a WZ Exclusion: Wino-bino(+), offshell_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20offshell_Exp">Fig 16a WZ Exclusion: Wino-bino(+), offshell_Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20onshell_Obs">Fig 16a WZ Exclusion: Wino-bino(+), onshell_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20onshell_Exp">Fig 16a WZ Exclusion: Wino-bino(+), onshell_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs_Up">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs_Down">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp_Up">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp_Down">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20compressed_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20compressed_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20offshell_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20offshell_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20onshell_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), onshell_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20onshell_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), onshell_Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs_Up">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs_Down">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp_Up">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp_Down">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20compressed_Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20compressed_Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20offshell_Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20offshell_Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs_Up">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs_Down">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp_Up">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp_Down">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20compressed_Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20compressed_Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20offshell_Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20offshell_Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs">Fig 17 Wh Exclusion, Obs</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs_Up">Fig 17 Wh Exclusion, Obs_Up</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs_Down">Fig 17 Wh Exclusion, Obs_Down</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp">Fig 17 Wh Exclusion, Exp</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp_Up">Fig 17 Wh Exclusion, Exp_Up</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp_Down">Fig 17 Wh Exclusion, Exp_Down</a> </ul> <b>Upper limits:</b> <ul display="inline-block"> <li><a href="?table=AuxFig%208a%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8a WZ Excl. Upper Limit Obs. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208b%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8b WZ Excl. Upper Limit Exp. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208c%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8c WZ Excl. Upper Limit Obs. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208d%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8d WZ Excl. Upper Limit Exp. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208e%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(-)%20($\Delta%20m$)">AuxFig 8e WZ Excl. Upper Limit Obs. Wino-bino(-) ($\Delta m$)</a> <li><a href="?table=AuxFig%208f%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(-)%20($\Delta%20m$)">AuxFig 8f WZ Excl. Upper Limit Exp. Wino-bino(-) ($\Delta m$)</a> <li><a href="?table=AuxFig%208g%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Higgsino%20($\Delta%20m$)">AuxFig 8g WZ Excl. Upper Limit Obs. Higgsino ($\Delta m$)</a> <li><a href="?table=AuxFig%208h%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Higgsino%20($\Delta%20m$)">AuxFig 8h WZ Excl. Upper Limit Exp. Higgsino ($\Delta m$)</a> <li><a href="?table=AuxFig%209a%20Wh%20Excl.%20Upper%20Limit%20Obs.">AuxFig 9a Wh Excl. Upper Limit Obs.</a> <li><a href="?table=AuxFig%209b%20Wh%20Excl.%20Upper%20Limit%20Exp.">AuxFig 9b Wh Excl. Upper Limit Exp.</a> </ul> <b>Model-independent discovery fits:</b> <ul display="inline-block"> <li><a href="?table=Tab%2018%20Onshell%20Discovery%20Fit%20Table">Tab 18 Onshell Discovery Fit Table</a> <li><a href="?table=Tab%2019%20Offshell%20Discovery%20Fit%20Table">Tab 19 Offshell Discovery Fit Table</a> <li><a href="?table=Tab%2021%20RJR%20Discovery%20Fit%20Table">Tab 21 RJR Discovery Fit Table</a> </ul> <b>Kinematic distributions:</b> <ul display="inline-block"> <li><a href="?table=Fig%2013a%20SR$_{DFOS}^{Wh}$-1%20($\Delta%20R_{OS,%20near}$)">Fig 13a SR$_{DFOS}^{Wh}$-1 ($\Delta R_{OS, near}$)</a> <li><a href="?table=Fig%2013b%20SR$_{DFOS}^{Wh}$-2%20(3rd%20Lep.%20$p_{T}$)">Fig 13b SR$_{DFOS}^{Wh}$-2 (3rd Lep. $p_{T}$)</a> <li><a href="?table=Fig%2013c%20SR$_{0j}^{WZ}$%20($E_{T}^{miss}$)">Fig 13c SR$_{0j}^{WZ}$ ($E_{T}^{miss}$)</a> <li><a href="?table=Fig%2013d%20SR$_{0j}^{WZ}$%20($m_{T}$)">Fig 13d SR$_{0j}^{WZ}$ ($m_{T}$)</a> <li><a href="?table=Fig%2014a%20SR$^{offWZ}_{LowETmiss}$-0j%20($m_{T}^{minmll}$)">Fig 14a SR$^{offWZ}_{LowETmiss}$-0j ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014b%20SR$^{offWZ}_{LowETmiss}$-nj%20($m_{T}^{minmll}$)">Fig 14b SR$^{offWZ}_{LowETmiss}$-nj ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014c%20SR$^{offWZ}_{HighETmiss}$-0j%20($m_{T}^{minmll}$)">Fig 14c SR$^{offWZ}_{HighETmiss}$-0j ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014d%20SR$^{offWZ}_{HighETmiss}$-nj%20($p_T^l%20\div%20E_T^{miss}$)">Fig 14d SR$^{offWZ}_{HighETmiss}$-nj ($p_T^l \div E_T^{miss}$)</a> <li><a href="?table=Fig%2020a%20RJR%20SR3$\ell$-Low%20($p_{T}^{\ell%201}$)">Fig 20a RJR SR3$\ell$-Low ($p_{T}^{\ell 1}$)</a> <li><a href="?table=Fig%2020b%20RJR%20SR3$\ell$-Low%20($H_{3,1}^{PP}$)">Fig 20b RJR SR3$\ell$-Low ($H_{3,1}^{PP}$)</a> <li><a href="?table=Fig%2020c%20RJR%20SR3$\ell$-ISR%20($p_{T~ISR}^{CM}$)">Fig 20c RJR SR3$\ell$-ISR ($p_{T~ISR}^{CM}$)</a> <li><a href="?table=Fig%2020d%20RJR%20SR3$\ell$-ISR%20($R_{ISR}$)">Fig 20d RJR SR3$\ell$-ISR ($R_{ISR}$)</a> </ul> <b>Cutflows:</b> <ul display="inline-block"> <li><a href="?table=AuxTab%205%20Cutflow:%20Onshell%20WZ">AuxTab 5 Cutflow: Onshell WZ</a> <li><a href="?table=AuxTab%206%20Cutflow:%20Onshell%20Wh">AuxTab 6 Cutflow: Onshell Wh</a> <li><a href="?table=AuxTab%207%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(250,235)">AuxTab 7 Cutflow: Offshell Wino-bino(+) (250,235)</a> <li><a href="?table=AuxTab%208%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(125,85)">AuxTab 8 Cutflow: Offshell Wino-bino(+) (125,85)</a> <li><a href="?table=AuxTab%209%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(250,170)">AuxTab 9 Cutflow: Offshell Wino-bino(+) (250,170)</a> <li><a href="?table=AuxTab%2010%20Cutflow:%20Offshell%20Wino-bino(-)%20(250,235)">AuxTab 10 Cutflow: Offshell Wino-bino(-) (250,235)</a> <li><a href="?table=AuxTab%2011%20Cutflow:%20Offshell%20Wino-bino(-)%20(125,85)">AuxTab 11 Cutflow: Offshell Wino-bino(-) (125,85)</a> <li><a href="?table=AuxTab%2012%20Cutflow:%20Offshell%20Wino-bino(-)%20(250,170)">AuxTab 12 Cutflow: Offshell Wino-bino(-) (250,170)</a> <li><a href="?table=AuxTab%2013%20Cutflow:%20Offshell%20Higgsino%20(120,100)">AuxTab 13 Cutflow: Offshell Higgsino (120,100)</a> <li><a href="?table=AuxTab%2014%20Cutflow:%20Offshell%20Higgsino%20(100,40)">AuxTab 14 Cutflow: Offshell Higgsino (100,40)</a> <li><a href="?table=AuxTab%2015%20Cutflow:%20Offshell%20Higgsino%20(185,125)">AuxTab 15 Cutflow: Offshell Higgsino (185,125)</a> </ul> <b>Acceptances and Efficiencies:</b> <ul display="inline-block"> <li><a href="?table=AuxFig%2010a%20Acc:%20Onshell%20SR$_{0j}^{WZ}$">AuxFig 10a Acc: Onshell SR$_{0j}^{WZ}$</a> <li><a href="?table=AuxFig%2010b%20Eff:%20Onshell%20SR$_{0j}^{WZ}$">AuxFig 10b Eff: Onshell SR$_{0j}^{WZ}$</a> <li><a href="?table=AuxFig%2010c%20Acc:%20Onshell%20SR$_{nj}^{WZ}$">AuxFig 10c Acc: Onshell SR$_{nj}^{WZ}$</a> <li><a href="?table=AuxFig%2010d%20Eff:%20Onshell%20SR$_{nj}^{WZ}$">AuxFig 10d Eff: Onshell SR$_{nj}^{WZ}$</a> <li><a href="?table=AuxFig%2011a%20Acc:%20Onshell%20SR$_{low-m_{ll}-0j}^{Wh}$">AuxFig 11a Acc: Onshell SR$_{low-m_{ll}-0j}^{Wh}$</a> <li><a href="?table=AuxFig%2011b%20Eff:%20Onshell%20SR$_{low-m_{ll}-0j}^{Wh}$">AuxFig 11b Eff: Onshell SR$_{low-m_{ll}-0j}^{Wh}$</a> <li><a href="?table=AuxFig%2011c%20Acc:%20Onshell%20SR$_{low-m_{ll}-nj}^{Wh}$">AuxFig 11c Acc: Onshell SR$_{low-m_{ll}-nj}^{Wh}$</a> <li><a href="?table=AuxFig%2011d%20Eff:%20Onshell%20SR$_{low-m_{ll}-nj}^{Wh}$">AuxFig 11d Eff: Onshell SR$_{low-m_{ll}-nj}^{Wh}$</a> <li><a href="?table=AuxFig%2011e%20Acc:%20Onshell%20SR$_{DFOS}^{Wh}$">AuxFig 11e Acc: Onshell SR$_{DFOS}^{Wh}$</a> <li><a href="?table=AuxFig%2011f%20Eff:%20Onshell%20SR$_{DFOS}^{Wh}$">AuxFig 11f Eff: Onshell SR$_{DFOS}^{Wh}$</a> <li><a href="?table=AuxFig%2012a%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 12a Acc: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2012b%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 12b Eff: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2012c%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 12c Acc: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2012d%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 12d Eff: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2012e%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 12e Acc: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2012f%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 12f Eff: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2012g%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 12g Acc: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2012h%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 12h Eff: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2013a%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 13a Acc: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2013b%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 13b Eff: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2013c%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 13c Acc: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2013d%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 13d Eff: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2013e%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 13e Acc: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2013f%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 13f Eff: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2013g%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 13g Acc: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2013h%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 13h Eff: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2014a%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 14a Acc: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2014b%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 14b Eff: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2014c%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 14c Acc: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2014d%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 14d Eff: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2014e%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 14e Acc: Off. Higgsino SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2014f%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 14f Eff: Off. Higgsino SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2014g%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 14g Acc: Off. Higgsino SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2014h%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 14h Eff: Off. Higgsino SR$^{offWZ}_{highETmiss}$-nj</a> </ul>
Comparison of the observed data and expected SM background yields in the CRs (pre-fit) and VRs (post-fit) of the onshell $W\!Z$ and $W\!h$ selections. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the relative difference between the observed data and expected yields for the CRs and the significance of the difference for the VRs, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the CRs (pre-fit) and VRs (post-fit) of the onshell $W\!Z$ and $W\!h$ selections. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the relative difference between the observed data and expected yields for the CRs and the significance of the difference for the VRs, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the CRs and VRs of the offshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the CRs and VRs of the offshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Observed and expected yields after the background-only fit in the SRs for the onshell $W\!Z$ selection. The normalization factors of the $W\!Z$ sample are extracted separately for the 0j, low-H<sub>T</sub> and high-H<sub>T</sub> regions, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in the SRs for the onshell $W\!Z$ selection. The normalization factors of the $W\!Z$ sample are extracted separately for the 0j, low-H<sub>T</sub> and high-H<sub>T</sub> regions, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in the SRs for the $W\!h$ selection. The normalization factors of the $W\!Z$ sample are extracted separately for the 0j, low-H<sub>T</sub> and high-H<sub>T</sub> regions, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, tt̄+X and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in the SRs for the $W\!h$ selection. The normalization factors of the $W\!Z$ sample are extracted separately for the 0j, low-H<sub>T</sub> and high-H<sub>T</sub> regions, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, tt̄+X and rare top processes. Combined statistical and systematic uncertainties are presented.
Comparison of the observed data and expected SM background yields in the SRs of the onshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the SRs of the onshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the SRs of the $W\!h$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, tt̄+X and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the SRs of the $W\!h$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, tt̄+X and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Observed and expected yields after the background-only fit in SR<sup>offWZ</sup><sub>lowETmiss</sub>. The normalization factors of the $W\!Z$ sample extracted separately for 0j and nj, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in SR<sup>offWZ</sup><sub>lowETmiss</sub>. The normalization factors of the $W\!Z$ sample extracted separately for 0j and nj, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in SR<sup>offWZ</sup><sub>highETmiss</sub>. The normalization factors of the $W\!Z$ sample extracted separately for 0j and nj, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in SR<sup>offWZ</sup><sub>highETmiss</sub>. The normalization factors of the $W\!Z$ sample extracted separately for 0j and nj, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Comparison of the observed data and expected SM background yields in the SRs of the offshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W^{*}\!Z^{*}$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the SRs of the offshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W^{*}\!Z^{*}$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Observed (N<sub>obs</sub>) yields after the discovery-fit and expected (N<sub>exp</sub>) after the background-only fit, for the inclusive SRs of the onshell $W\!Z$ and $W\!h$ selections. The third and fourth column list the 95 CL upper limits on the visible cross-section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5.
Observed (N<sub>obs</sub>) yields after the discovery-fit and expected (N<sub>exp</sub>) after the background-only fit, for the inclusive SRs of the onshell $W\!Z$ and $W\!h$ selections. The third and fourth column list the 95 CL upper limits on the visible cross-section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5.
Observed (N<sub>obs</sub>) yields after the discovery-fit and expected (N<sub>exp</sub>) after the background-only fit, for the inclusive SRs of the offshell $W\!Z$ selection. The third and fourth column list the 95 CL upper limits on the visible cross section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5.
Observed (N<sub>obs</sub>) yields after the discovery-fit and expected (N<sub>exp</sub>) after the background-only fit, for the inclusive SRs of the offshell $W\!Z$ selection. The third and fourth column list the 95 CL upper limits on the visible cross section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Comparison of the observed data and expected SM background yields in the CRs and VRs of the RJR selection. The SM prediction is taken from the background-only fit. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the CRs and VRs of the RJR selection. The SM prediction is taken from the background-only fit. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Observed and expected yields after the background-only fit in the SRs for the RJR selection. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in the SRs for the RJR selection. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
{Results of the discovery-fit for the SRs of the RJR selection, calculated using pseudo-experiments.} The first and second column list the 95 CL upper limits on the visible cross section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The third column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5. vspace{0.5em}
{Results of the discovery-fit for the SRs of the RJR selection, calculated using pseudo-experiments.} The first and second column list the 95 CL upper limits on the visible cross section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The third column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5. vspace{0.5em}
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!h$-mediated model, for the wino/bino (+) scenario, as in Figure 17. The black numbers represent the observed (a,c,e,g) and expected (b,d,f,h) upper cross-section limits.
Exclusion limits obtained for the $W\!h$-mediated model, for the wino/bino (+) scenario, as in Figure 17. The black numbers represent the observed (a,c,e,g) and expected (b,d,f,h) upper cross-section limits.
Exclusion limits obtained for the $W\!h$-mediated model, for the wino/bino (+) scenario, as in Figure 17. The black numbers represent the observed (a,c,e,g) and expected (b,d,f,h) upper cross-section limits.
Exclusion limits obtained for the $W\!h$-mediated model, for the wino/bino (+) scenario, as in Figure 17. The black numbers represent the observed (a,c,e,g) and expected (b,d,f,h) upper cross-section limits.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
Summary of onshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (300,200) GeV and m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (600,100) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal points, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks per inclusive regions, and then further for each SR. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5.
Summary of onshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (300,200) GeV and m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (600,100) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal points, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks per inclusive regions, and then further for each SR. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5.
Summary of $W\!h$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (190,60) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks per inclusive regions, and then further for each SR. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5.
Summary of $W\!h$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (190,60) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks per inclusive regions, and then further for each SR. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,235) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,235) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (125,85) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (125,85) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,170) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,170) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,235) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,235) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (125,85) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (125,85) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,170) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,170) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (120,100) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (120,100) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (100,40) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (100,40) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (185,125) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (185,125) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
The results of a search for direct pair production of top squarks and for dark matter in events with two opposite-charge leptons (electrons or muons), jets and missing transverse momentum are reported, using 139 fb$^{-1}$ of integrated luminosity from proton-proton collisions at $\sqrt{s} = 13$ TeV, collected by the ATLAS detector at the Large Hadron Collider during Run 2 (2015-2018). This search considers the pair production of top squarks and is sensitive across a wide range of mass differences between the top squark and the lightest neutralino. Additionally, spin-0 mediator dark-matter models are considered, in which the mediator is produced in association with a pair of top quarks. The mediator subsequently decays to a pair of dark-matter particles. No significant excess of events is observed above the Standard Model background, and limits are set at 95% confidence level. The results exclude top squark masses up to about 1 TeV, and masses of the lightest neutralino up to about 500 GeV. Limits on dark-matter production are set for scalar (pseudoscalar) mediator masses up to about 250 (300) GeV.
Two-body selection. Distributions of $m_{T2}$ in $SR^{2-body}_{110,\infty}$ for (a) different-flavour and (b) same-flavour events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference dark-matter signal models are overlayed for comparison. Red arrows in the upper panels indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction.
Two-body selection. Distributions of $m_{T2}$ in $SR^{2-body}_{110,\infty}$ for (a) different-flavour and (b) same-flavour events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference dark-matter signal models are overlayed for comparison. Red arrows in the upper panels indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction.
Three-body selection. Distributions of $M_{\Delta}^R$ in (a,b) $SR_{W}^{3-body}$ and (c,d) $SR_{T}^{3-body}$ for (left) same-flavour and (right) different-flavour events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panels indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.
Three-body selection. Distributions of $M_{\Delta}^R$ in (a,b) $SR_{W}^{3-body}$ and (c,d) $SR_{T}^{3-body}$ for (left) same-flavour and (right) different-flavour events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panels indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.
Three-body selection. Distributions of $M_{\Delta}^R$ in (a,b) $SR_{W}^{3-body}$ and (c,d) $SR_{T}^{3-body}$ for (left) same-flavour and (right) different-flavour events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panels indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.
Three-body selection. Distributions of $M_{\Delta}^R$ in (a,b) $SR_{W}^{3-body}$ and (c,d) $SR_{T}^{3-body}$ for (left) same-flavour and (right) different-flavour events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panels indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.
Four-body selection. (a) distributions of $E_{T}^{miss}$ in $SR^{4-body}_{Small\,\Delta m}$ and (b) distribution of $R_{2\ell 4j}$ in $SR^{4-body}_{Large\,\Delta m}$ for events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panel indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.
Four-body selection. (a) distributions of $E_{T}^{miss}$ in $SR^{4-body}_{Small\,\Delta m}$ and (b) distribution of $R_{2\ell 4j}$ in $SR^{4-body}_{Large\,\Delta m}$ for events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panel indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the Observed limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.
Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the mediator mass for a DM particle mass of $m(\chi)=1$ GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.
Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the mediator mass for a DM particle mass of $m(\chi)=1$ GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.
Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the mediator mass for a DM particle mass of $m(\chi)=1$ GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.
Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the mediator mass for a DM particle mass of $m(\chi)=1$ GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.
Two-body selection. Background fit results for $\mathrm{CR}^{\mathrm{2-body}}_{t\bar{t}}$, $\mathrm{CR}^{\mathrm{2-body}}_{t\bar{t}Z}$, $\mathrm{VR}^{\mathrm{2-body}}_{t\bar{t}, DF}$, $\mathrm{VR}^{\mathrm{2-body}}_{t\bar{t}, SF}$ and $\mathrm{VR}^{\mathrm{2-body}}_{t\bar{t} Z}$. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.
Three-body selection. Background fit results for $\mathrm{CR}^{\mathrm{3-body}}_{t\bar{t}}$, $\mathrm{CR}^{\mathrm{3-body}}_{VV}$, $\mathrm{CR}^{\mathrm{2-body}}_{t\bar{t}Z}$, $\mathrm{VR}^{\mathrm{3-body}}_{VV}$, $\mathrm{VR(1)}^{\mathrm{3-body}}_{t\bar{t}}$ and $\mathrm{VR(2)}^{\mathrm{3-body}}_{t\bar{t}}$. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.
Four-body selection. Background fit results for $\mathrm{CR}^{\mathrm{4-body}}_{t\bar{t}}$,$\mathrm{CR}^{\mathrm{4-body}}_{VV}$, $\mathrm{VR}^{\mathrm{4-body}}_{t\bar{t}}$, $VR^{4-body}_{VV}$ and $\mathrm{VR}^{\mathrm{4-body}}_{VV,lll}$. The ''Others'' category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.
Two-body selection. Background fit results for the different-flavour leptons binned SRs. The ''Others'' category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.
Two-body selection. Background fit results for the same-flavour leptons binned SRs. The ''Others'' category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.
Three-body selection. Observed event yields and background fit results for the three-body selection SRs. The ''Others'' category contains contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.
Four-body selection. Observed event yields and background fit results for SR$^{\mathrm{4-body}}_{\mathrm{Small}\,\Delta m}$ and SR$^{\mathrm{4-body}}_{\mathrm{Large}\,\Delta m}$. The ''Others'' category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.
Exclusion limits contours (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}^0_1$ with 100% branching ratio in $\tilde{t}_1--\tilde{\chi}^0_1$ masses planes. The dashed lines and the shaded bands are the expected limit and its $\pm 1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The exclusion limits contours for the two-body, three-body and four-body selections are respectively shown in blue, green and red.
Exclusion limits contours (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}^0_1$ with 100% branching ratio in $\tilde{t}_1--\tilde{\chi}^0_1$ masses planes. The dashed lines and the shaded bands are the expected limit and its $\pm 1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The exclusion limits contours for the two-body, three-body and four-body selections are respectively shown in blue, green and red.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b W \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b W \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b W \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm 1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b W \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty.The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty.The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.
Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the DM particle mass for a mediator mass of 10 GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.
Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the DM particle mass for a mediator mass of 10 GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.
Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the DM particle mass for a mediator mass of 10 GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.
Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the DM particle mass for a mediator mass of 10 GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Three-body selection efficiency (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Three-body selection efficiency (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Three-body selection efficiency (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Three-body selection efficiency (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Four-body selection Efficiency (a) SR$^{4-body}_{Small \Delta m}$ , (b) $SR^{4-body}_{Large \Delta m}$ for a simplified model assuming $\tilde{t}_1$ pair production.
Four-body selection Efficiency (a) SR$^{4-body}_{Small \Delta m}$ , (b) $SR^{4-body}_{Large \Delta\ m}$ for a simplified model assuming $\tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} +\phi$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Three-body selection acceptance (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Three-body selection acceptance (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Three-body selection acceptance (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Three-body selection acceptance (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.
Four-body selection acceptance (a) SR$^{4-body}_{Small \Delta m}$ , (b) $SR^{4-body}_{Large \Delta m}$ for a simplified model assuming $\tilde{t}_1$ pair production.
Four-body selection acceptance (a) SR$^{4-body}_{Small \Delta m}$ , (b) $SR^{4-body}_{Large \Delta m}$ for a simplified model assuming $\tilde{t}_1$ pair production.
Two-body selection The numbers indicate the observed upper limits on the signal strenght for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.
Two-body selection The numbers indicate the observed upper limits on the signal strenght for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.
Two-body selection The numbers indicate the observed upper limits on the signal strenght for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.
Three-body selection The numbers indicate the upper limits on the signal strenght for a simplified model assuming $\tilde{t}_1$ pair production. For comparison, the red line corresponds to the observed limit.
Four-body selection The numbers indicate the upper limits on the signal strenght for a simplified model assuming $\tilde{t}_1$ pair production. For comparison, the red line corresponds to the observed limit.
Two-body selection The numbers indicate the upper limits on the signal cross-section for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.
Two-body selection The numbers indicate the upper limits on the signal cross-section for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.
Two-body selection The numbers indicate the upper limits on the signal cross-section for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.
Three-body selection The numbers indicate the upper limits on the signal cross-section for a simplified model assuming $\tilde{t}_1$ pair production. For comparison, the red line corresponds to the observed limit.
Four-body selection The numbers indicate the upper limits on the signal cross-section for a simplified model assuming $\tilde{t}_1$ pair production. For comparison, the red line corresponds to the observed limit.
Two-body selection. Background fit results for the $inclusive$ SRs. The Others category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. Note that the individual uncertainties can be correlated, and do not necessarily add up quadratically to the total background uncertainty.
Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=600~ GeV$ and $m(\tilde{\chi}^0_1)=400~ GeV$ in the SRs for the two-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Cut flow for the scalar signal model $t\bar{t} + \phi $ with $m(\phi)=150~ GeV$ and $m(\chi)=1~ GeV$ in the SRs for the two-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Cut flow for the pseudoscalar signal model $t\bar{t} + a $ with $m(a)=150~ GeV$ and $m(\chi)=1~ GeV$ in the SRs for the two-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow bW\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=550~ GeV$ and $m(\tilde{\chi}^0_1)=385~ GeV$ in the SRs for the three-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow bW\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=550~ GeV$ and $m(\tilde{\chi}^0_1)=400~ GeV$ in the SRs for the three-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow bW\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=550~ GeV$ and $m(\tilde{\chi}^0_1)=430~ GeV$ in the SRs for the three-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow bW\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=550~ GeV$ and $m(\tilde{\chi}^0_1)=460~ GeV$ in the SRs for the three-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}^0_1$ with $m(\tilde{t}_1)=400~ GeV$ and $m(\tilde{\chi}^0_1)=380~ GeV$ in the SRs for the four-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}^0_1$ with $m(\tilde{t}_1)=460~ GeV$ and $m(\tilde{\chi}^0_1)=415~ GeV$ in the SRs for the four-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}^0_1$ with $m(\tilde{t}_1)=400~ GeV$ and $m(\tilde{\chi}^0_1)=320~ GeV$ in the SRs for the four-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.
Several extensions of the Standard Model predict the production of dark matter particles at the LHC. An uncharted signature of dark matter particles produced in association with $VV=W^\pm W^\mp$ or $ZZ$ pairs from a decay of a dark Higgs boson $s$ is searched for using 139 fb$^{-1}$ of $pp$ collisions recorded by the ATLAS detector at a center-of-mass energy of 13 TeV. The $s\to V(q\bar q)V(q\bar q)$ decays are reconstructed with a novel technique aimed at resolving the dense topology from boosted $VV$ pairs using jets in the calorimeter and tracking information. Dark Higgs scenarios with $m_s > 160$ GeV are excluded.
Data overlaid on SM background post-fit yields stacked in each SR and CR category and E<sub>T</sub><sup>miss</sup> bin with the maximum-likelihood estimators set to the conditional values of the CR-only fit, and propagated to SR and CRs. Pre-fit uncertainties cover differences between the data and pre-fit background prediction.
Dominant sources of uncertainty for three dark Higgs scenarios after the fit to Asimov data generated from the expected values of the maximum-likelihood estimators including predicted signals with m<sub>Z'</sub> = 1 TeV and m<sub>s</sub> of (a) 160 GeV, (b) 235 GeV, and (c) 310 GeV. The uncertainty in the fitted signal yield relative to the theory prediction is presented. Total is the quadrature sum of statistical and total systematic uncertainties, which consider correlations.
The ratios (μ) of the 95% C.L. upper limits on the combined s→ W<sup>±</sup>W<sup>∓</sup> and s→ ZZ cross section to simplified model expectations for the m<sub>Z'</sub>=0.5 TeV scenario, for various m<sub>s</sub> hypotheses. The observed limits (solid line) are consistent with the expectation under the SM-only hypothesis (dashed line) within uncertainties (filled band), except for a small excess for m<sub>s</sub>=160 GeV, discussed in the text.
The ratios (μ) of the 95% C.L. upper limits on the combined s→ W<sup>±</sup>W<sup>∓</sup> and s→ ZZ cross section to simplified model expectations for the m<sub>Z'</sub>=1 TeV scenario, for various m<sub>s</sub> hypotheses. The observed limits (solid line) are consistent with the expectation under the SM-only hypothesis (dashed line) within uncertainties (filled band), except for a small excess for m<sub>s</sub>=160 GeV, discussed in the text.
The ratios (μ) of the 95% C.L. upper limits on the combined s→ W<sup>±</sup>W<sup>∓</sup> and s→ ZZ cross section to simplified model expectations for the m<sub>Z'</sub>=1.7 TeV scenario, for various m<sub>s</sub> hypotheses. The observed limits (solid line) are consistent with the expectation under the SM-only hypothesis (dashed line) within uncertainties (filled band), except for a small excess for m<sub>s</sub>=160 GeV, discussed in the text.
Observed upper limits at 95% C.L. on σ(pp → s χχ) × B(s→ VV) for m<sub>Z'</sub>=0.5 TeV signal points. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the σ(pp → s χχ) × B(s→ VV) process for m<sub>Z'</sub>=0.5 TeV, shown in dashed blue.
Observed upper limits at 95% C.L. on σ(pp → s χχ) × B(s→ VV) for m<sub>Z'</sub>=1 TeV signal points. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the σ(pp → s χχ) × B(s→ VV) process for m<sub>Z'</sub>=1 TeV, shown in dashed blue.
Observed upper limits at 95% C.L. on σ(pp → s χχ) × B(s→ VV) for m<sub>Z'</sub>=1.7 TeV signal points. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the σ(pp → s χχ) × B(s→ VV) process for m<sub>Z'</sub>=1.7 TeV, shown in dashed blue.
SM background post-fit yields stacked in each SR and CR category and E<sub>T</sub><sup>miss</sup> bin and data overlaid with the maximum likelihood estimators set to the conditional values of the combined signal and control region fit. The hatched uncertainty band shown includes simulation statistics uncertainties, experimental systematic uncertainties, and V+jets theory modelling systematic uncertainties. Pre-fit uncertainties cover differences between the data and pre-fit background prediction.
Cumulative efficiencies for the merged category for signal samples with m<sub>s</sub>=160 GeV (a), m<sub>s</sub>=235 GeV (b) and m<sub>s</sub>=310 GeV (c), each with m<sub>Z'</sub>=1 TeV. The dark Higgs candidate selection includes stringent jet substructure requirements and typically at most one candidate is present in signal events. Here, Δ φ<sub>jets<sub>1,2,3</sub> E<sub>T</sub><sup>miss</sup></sub> is the smallest azimuthal angle between the E<sub>T</sub><sup>miss</sup> and any of the three highest-p<sub>T</sub> (leading) small-R jets.
Cumulative efficiencies for the intermediate category for signal samples with m<sub>s</sub>=160 GeV (a), m<sub>s</sub>=235 GeV (b) and m<sub>s</sub>=310 GeV (c), each with m<sub>Z'</sub>=1 TeV. The TAR+Comb algorithm reconstructs the dark Higgs candidate from a TAR jet with m<sup>TAR</sup>>60 GeV that is supplemented by up to two additional small-R jets within ΔR<sub>cone</sub>=2.5 of the TAR jet. Here, Δ φ<sub>jets<sub>1,2,3</sub> E<sub>T</sub><sup>miss</sup></sub> is the smallest azimuthal angle between the E<sub>T</sub><sup>miss</sup> and any of the three highest-p<sub>T</sub> (leading) small-R jets. For details see text.
The product of acceptance and efficiency (A × ϵ), defined as the number of signal events satisfying the full set of selection criteria in the merged or intermediate signal regions, divided by the total number of generated signal events, for the s(W<sup>±</sup>W<sup>∓</sup>) dark Higgs signal points with dark Higgs boson mass m<sub>s</sub> and Z' boson mass m<sub>Z'</sub>.
The product of acceptance and efficiency (A × ϵ), defined as the number of signal events satisfying the full set of selection criteria in the merged or intermediate signal regions, divided by the total number of generated signal events, for the s(ZZ) dark Higgs signal points with dark Higgs boson mass m<sub>s</sub> and Z' boson mass m<sub>Z'</sub>.
A search is presented for new phenomena in events characterised by high jet multiplicity, no leptons (electrons or muons), and four or more jets originating from the fragmentation of $b$-quarks ($b$-jets). The search uses 139 fb$^{-1}$ of $\sqrt{s}$ = 13 TeV proton-proton collision data collected by the ATLAS experiment at the Large Hadron Collider during Run 2. The dominant Standard Model background originates from multijet production and is estimated using a data-driven technique based on an extrapolation from events with low $b$-jet multiplicity to the high $b$-jet multiplicities used in the search. No significant excess over the Standard Model expectation is observed and 95% confidence-level limits that constrain simplified models of R-parity-violating supersymmetry are determined. The exclusion limits reach 950 GeV in top-squark mass in the models considered.
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <br><br> <b>Exclusion contours:</b> <ul> <li><a href="?table=stbchionly_obs">Stop to bottom quark and chargino exclusion contour (Obs.)</a> <li><a href="?table=stbchionly_exp">Stop to bottom quark and chargino exclusion contour (Exp.)</a> <li><a href="?table=stbchi_obs">Stop to higgsino LSP exclusion contour (Obs.)</a> <li><a href="?table=stbchi_exp">Stop to higgsino LSP exclusion contour (Exp.)</a> <li><a href="?table=sttN_obs">Stop to top quark and neutralino exclusion contour (Obs.)</a> <li><a href="?table=sttN_exp">Stop to top quark and neutralino exclusion contour (Exp.)</a> </ul> <b>Upper limits:</b> <ul> <li><a href="?table=stbchionly_xSecUL_obs">Obs Xsection upper limit in stop to bottom quark and chargino</a> <li><a href="?table=stop_xSecUL_obs">Obs Xsection upper limit in higgsino LSP</a> <li><a href="?table=stbchionly_xSecUL_exp">Exp Xsection upper limit in stop to bottom quark and chargino</a> <li><a href="?table=stop_xSecUL_exp">Exp Xsection upper limit in higgsino LSP</a> </ul> <b>Kinematic distributions:</b> <ul> <li><a href="?table=SR_yields">SR_yields</a> </ul> <b>Cut flows:</b> <ul> <li><a href="?table=cutflow">cutflow</a> </ul> <b>Acceptance and efficiencies:</b> As explained in <a href="https://twiki.cern.ch/twiki/bin/view/AtlasPublic/SupersymmetryPublicResults#summary_of_auxiliary_material">the twiki</a>. <ul> <li> <b>stbchi_6je4be:</b> <a href="?table=stbchi_Acc_6je4be">stbchi_Acc_6je4be</a> <a href="?table=stbchi_Eff_6je4be">stbchi_Eff_6je4be</a> <li> <b>stbchi_7je4be:</b> <a href="?table=stbchi_Acc_7je4be">stbchi_Acc_7je4be</a> <a href="?table=stbchi_Eff_7je4be">stbchi_Eff_7je4be</a> <li> <b>stbchi_8je4be:</b> <a href="?table=stbchi_Acc_8je4be">stbchi_Acc_8je4be</a> <a href="?table=stbchi_Eff_8je4be">stbchi_Eff_8je4be</a> <li> <b>stbchi_9ji4be:</b> <a href="?table=stbchi_Acc_9ji4be">stbchi_Acc_9ji4be</a> <a href="?table=stbchi_Eff_9ji4be">stbchi_Eff_9ji4be</a> <li> <b>stbchi_6je5bi:</b> <a href="?table=stbchi_Acc_6je5bi">stbchi_Acc_6je5bi</a> <a href="?table=stbchi_Eff_6je5bi">stbchi_Eff_6je5bi</a> <li> <b>stbchi_7je5bi:</b> <a href="?table=stbchi_Acc_7je5bi">stbchi_Acc_7je5bi</a> <a href="?table=stbchi_Eff_7je5bi">stbchi_Eff_7je5bi</a> <li> <b>stbchi_8je5bi:</b> <a href="?table=stbchi_Acc_8je5bi">stbchi_Acc_8je5bi</a> <a href="?table=stbchi_Eff_8je5bi">stbchi_Eff_8je5bi</a> <li> <b>stbchi_9ji5bi:</b> <a href="?table=stbchi_Acc_9ji5bi">stbchi_Acc_9ji5bi</a> <a href="?table=stbchi_Eff_9ji5bi">stbchi_Eff_9ji5bi</a> <li> <b>stbchi_8ji5bi:</b> <a href="?table=stbchi_Acc_8ji5bi">stbchi_Acc_8ji5bi</a> <a href="?table=stbchi_Eff_8ji5bi">stbchi_Eff_8ji5bi</a> <li> <b>sttN_6je4be:</b> <a href="?table=sttN_Acc_6je4be">sttN_Acc_6je4be</a> <a href="?table=sttN_Eff_6je4be">sttN_Eff_6je4be</a> <li> <b>sttN_7je4be:</b> <a href="?table=sttN_Acc_7je4be">sttN_Acc_7je4be</a> <a href="?table=sttN_Eff_7je4be">sttN_Eff_7je4be</a> <li> <b>sttN_8je4be:</b> <a href="?table=sttN_Acc_8je4be">sttN_Acc_8je4be</a> <a href="?table=sttN_Eff_8je4be">sttN_Eff_8je4be</a> <li> <b>sttN_9ji4be:</b> <a href="?table=sttN_Acc_9ji4be">sttN_Acc_9ji4be</a> <a href="?table=sttN_Eff_9ji4be">sttN_Eff_9ji4be</a> <li> <b>sttN_6je5bi:</b> <a href="?table=sttN_Acc_6je5bi">sttN_Acc_6je5bi</a> <a href="?table=sttN_Eff_6je5bi">sttN_Eff_6je5bi</a> <li> <b>sttN_7je5bi:</b> <a href="?table=sttN_Acc_7je5bi">sttN_Acc_7je5bi</a> <a href="?table=sttN_Eff_7je5bi">sttN_Eff_7je5bi</a> <li> <b>sttN_8je5bi:</b> <a href="?table=sttN_Acc_8je5bi">sttN_Acc_8je5bi</a> <a href="?table=sttN_Eff_8je5bi">sttN_Eff_8je5bi</a> <li> <b>sttN_9ji5bi:</b> <a href="?table=sttN_Acc_9ji5bi">sttN_Acc_9ji5bi</a> <a href="?table=sttN_Eff_9ji5bi">sttN_Eff_9ji5bi</a> <li> <b>sttN_8ji5bi:</b> <a href="?table=sttN_Acc_8ji5bi">sttN_Acc_8ji5bi</a> <a href="?table=sttN_Eff_8ji5bi">sttN_Eff_8ji5bi</a> </ul> <b>Truth Code snippets</b> and <b>SLHA</a> files are available under "Resources" (purple button on the left)
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{\pm}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown for $B(\tilde{t} \rightarrow b \chi^{+}_{1})$ equal to unity.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{\pm}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contour are excluded. Limits are shown for $B(\tilde{t} \rightarrow b \chi^{+}_{1})$ equal to unity.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown in the case of a higgsino LSP. The results are constrained by the kinematic limits of the top-squark decay into a chargino and a bottom quark (upper diagonal line) and into a neutralino and a top quark (lower diagonal line), respectively.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown in the case of a higgsino LSP. The results are constrained by the kinematic limits of the top-squark decay into a chargino and a bottom quark (upper diagonal line) and into a neutralino and a top quark (lower diagonal line), respectively.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown for the region $m_{\tilde{t}} - m_{\tilde{\chi}^0_{1,2}, \tilde{\chi}^\pm_{1}} \geq m_\text{top}$ where $B(\tilde{t} \rightarrow b \chi^{+}_{1}) = B(\tilde{t} \rightarrow t \chi^{0}_{1,2}) = 0.5$.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown for the region $m_{\tilde{t}} - m_{\tilde{\chi}^0_{1,2}, \tilde{\chi}^\pm_{1}} \geq m_\text{top}$ where $B(\tilde{t} \rightarrow b \chi^{+}_{1}) = B(\tilde{t} \rightarrow t \chi^{0}_{1,2}) = 0.5$.
Observed model-dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{\pm}_{1})$ signal grid. Limits are shown for $B(\tilde{t} \rightarrow b \chi^{+}_{1})$ equal to unity.
Observed model-dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{\pm}_{1} / \tilde{\chi}^{0}_{1,2})$ signal grid. Limits are shown in the case of a higgsino LSP. The results are constrained by the kinematic limits of the top-squark decay into a chargino and a bottom quark (upper diagonal line) and into a neutralino and a top quark (lower diagonal line), respectively.
Expected model-dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{\pm}_{1})$ signal grid. Limits are shown for $B(\tilde{t} \rightarrow b \chi^{+}_{1})$ equal to unity.
Expected model-dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{\pm}_{1} / \tilde{\chi}^{0}_{1,2})$ signal grid. Limits are shown in the case of a higgsino LSP. The results are constrained by the kinematic limits of the top-squark decay into a chargino and a bottom quark (upper diagonal line) and into a neutralino and a top quark (lower diagonal line), respectively.
Expected background and observed number of events in different jet and $b$-tag multiplicity bins.
Cut flow for a model of top-squark pair production with the top squark decaying to a $b$-quark and a chargino. The chargino decays through the non-zero RPV coupling $\lambda^{''}_{323}$ via a virtual top squark to $bbs$ quark triplets ($m_{\tilde{t}}$ = 800 GeV, $m_{\tilde{\chi}^{\pm}_{1}}$ = 750 GeV). The multijet trigger consists of four jets satisfying $p_{\text{T}}\geq(100)120$ GeV for the 2015-2016 (2017-2018) data period. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed. The numbers in $N_{\text{weighted}}$ are normalized by the integrated luminosity of 139 fb$^{-1}$.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal efficiency for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the efficiency given in the table is reported in %.
Signal efficiency for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the efficiency given in the table is reported in %.
Signal efficiency for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the efficiency given in the table is reported in %.
Signal efficiency for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the efficiency given in the table is reported in %.
Signal efficiency for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the efficiency given in the table is reported in %.
Signal efficiency for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the efficiency given in the table is reported in %.
Signal efficiency for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the efficiency given in the table is reported in %.
Signal efficiency for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the efficiency given in the table is reported in %.
Signal efficiency for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the efficiency given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
In this paper, a new technique for reconstructing and identifying hadronically decaying $\tau^+\tau^-$ pairs with a large Lorentz boost, referred to as the di-$\tau$ tagger, is developed and used for the first time in the ATLAS experiment at the Large Hadron Collider. A benchmark di-$\tau$ tagging selection is employed in the search for resonant Higgs boson pair production, where one Higgs boson decays into a boosted $b\bar{b}$ pair and the other into a boosted $\tau^+\tau^-$ pair, with two hadronically decaying $\tau$-leptons in the final state. Using 139 fb$^{-1}$ of proton$-$proton collision data recorded at a centre-of-mass energy of 13 TeV, the efficiency of the di-$\tau$ tagger is determined and the background with quark- or gluon-initiated jets misidentified as di-$\tau$ objects is estimated. The search for a heavy, narrow, scalar resonance produced via gluon$-$gluon fusion and decaying into two Higgs bosons is carried out in the mass range 1$-$3 TeV using the same dataset. No deviations from the Standard Model predictions are observed, and 95% confidence-level exclusion limits are set on this model.
Signal acceptance times selection efficiency as a function of the resonance mass, at various stages of the event selection. From top to bottom: an event pre-selection (trigger, object definitions and $E_{T}^{miss}>10$ GeV) is performed first; the requirements on the di-$\tau$ object and large-$R$ jet detailed in the text are then applied; finally, the $HH$ SR definition must be satisfied.
Signal acceptance times selection efficiency as a function of the resonance mass, at various stages of the event selection. From top to bottom: an event pre-selection (trigger, object definitions and $E_{T}^{miss}>10$ GeV) is performed first; the requirements on the di-$\tau$ object and large-$R$ jet detailed in the text are then applied; finally, the $HH$ SR definition must be satisfied.
Distribution of $m^{vis}_{HH}$ after applying all the event selection that define the $HH$ SR, except the requirement on $m^{vis}_{HH}$. The background labelled as "Others" contains $W$+jets, diboson, $t\bar{t}$ and single-top-quark processes. The $X\rightarrow HH \rightarrow b\bar{b}\tau^{+}\tau^{-}$ signal is overlaid for two resonance mass hypotheses with a cross-section set to the expected limit, while all backgrounds are pre-fit. The first and the last bins contains the under-flow and over-flow bin entries, respectively. The hatched bands represent combined statistical and systematic uncertainties.
Distribution of $m^{vis}_{HH}$ after applying all the event selection that define the $HH$ SR, except the requirement on $m^{vis}_{HH}$. The background labelled as "Others" contains $W$+jets, diboson, $t\bar{t}$ and single-top-quark processes. The $X\rightarrow HH \rightarrow b\bar{b}\tau^{+}\tau^{-}$ signal is overlaid for two resonance mass hypotheses with a cross-section set to the expected limit, while all backgrounds are pre-fit. The first and the last bins contains the under-flow and over-flow bin entries, respectively. The hatched bands represent combined statistical and systematic uncertainties.
Event yields of the various estimated backgrounds and data, computed in the signal region of the search for $X\rightarrow HH \rightarrow b\bar{b}\tau^{+}\tau^{-}$. The background labelled as "Others" contains $W$+jets, diboson, $t\bar{t}$ and single-top-quark processes. Statistical and systematic uncertainties are quoted. The background yields and uncertainties are pre-fit and are found to be similar to those post-fit.
Event yields of the various estimated backgrounds and data, computed in the signal region of the search for $X\rightarrow HH \rightarrow b\bar{b}\tau^{+}\tau^{-}$. The background labelled as "Others" contains $W$+jets, diboson, $t\bar{t}$ and single-top-quark processes. Statistical and systematic uncertainties are quoted. The background yields and uncertainties are pre-fit and are found to be similar to those post-fit.
Expected and observed 95% CL upper limits on the production of a heavy, narrow-width, scalar resonance decaying to a pair of Higgs bosons ($X\rightarrow HH$). The final state used in the search consists of a boosted $b\bar{b}$ pair and a boosted hadronically decaying $\tau^{+}\tau^{-}$ pair, and the SM braching ratio of the Higgs boson are assumed. The $\pm 1\sigma$ and $\pm 2\sigma$ variations about the expected limit are indicated by the error bands. Two different requirements are applied on the visible mass of the two boosted Higgs boson candidates for the resonance mass hypotheses of 1.6 TeV and 2.5 TeV, leading to discontinuities in the limits (at 1.6 TeV, the difference between imposing no requirement and $m^{vis}_{HH}>900$ GeV is less than 1% though).
Expected and observed 95% CL upper limits on the production of a heavy, narrow-width, scalar resonance decaying to a pair of Higgs bosons ($X\rightarrow HH$). The final state used in the search consists of a boosted $b\bar{b}$ pair and a boosted hadronically decaying $\tau^{+}\tau^{-}$ pair, and the SM braching ratio of the Higgs boson are assumed. The $\pm 1\sigma$ and $\pm 2\sigma$ variations about the expected limit are indicated by the error bands. Two different requirements are applied on the visible mass of the two boosted Higgs boson candidates for the resonance mass hypotheses of 1.6 TeV and 2.5 TeV, leading to discontinuities in the limits (at 1.6 TeV, the difference between imposing no requirement and $m^{vis}_{HH}>900$ GeV is less than 1% though).
This paper describes a search for beyond the Standard Model decays of the Higgs boson into a pair of new spin-0 particles subsequently decaying into $b$-quark pairs, $H \rightarrow aa \rightarrow (b\bar{b})(b\bar{b})$, using proton-proton collision data collected by the ATLAS detector at the Large Hadron Collider at center-of-mass energy $\sqrt{s}=13$ TeV. This search focuses on the regime where the decay products are collimated and in the range $15 \leq m_a \leq 30$ GeV and is complementary to a previous search in the same final state targeting the regime where the decay products are well separated and in the range $20 \leq m_a \leq 60$ GeV. A novel strategy for the identification of the $a \rightarrow b\bar{b}$ decays is deployed to enhance the efficiency for topologies with small separation angles. The search is performed with 36 fb$^{-1}$ of integrated luminosity collected in 2015 and 2016 and sets upper limits on the production cross-section of $H \rightarrow aa \rightarrow (b\bar{b})(b\bar{b})$, where the Higgs boson is produced in association with a $Z$ boson.
Summary of the 95% CL upper limits on $\sigma_{ZH} BR(H\rightarrow aa \rightarrow (b\bar{b})(b\bar{b}))$. Both observed and expected limits are listed. In the case of the expected limits, one- and two-standard-deviation uncertainty bands are also listed.
Summary of the 95% CL upper limits on $\sigma_{ZH} BR(H\rightarrow aa \rightarrow (b\bar{b})(b\bar{b}))$. Both observed and expected limits are listed. In the case of the expected limits, one- and two-standard-deviation uncertainty bands are also listed.
Summary of the observed 95% CL upper limits on $\sigma_{ZH} BR(H\rightarrow aa \rightarrow (b\bar{b})(b\bar{b}))$ for the resolved analysis.
Summary of the 95% C.L. upper limits on $\sigma_{ZH} BR(H\rightarrow aa \rightarrow (b\bar{b})(b\bar{b}))$ for the dilepton channel in the resolved analysis. The observed limits are shown, together with the expected limits (dotted black lines). In the case of the expected limits, one- and two-standard-deviation uncertainty bands are also displayed. The data was published in JHEP 10 (2018) 031.
Efficiency and acceptance for simulated $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ samples in two signal regions (SR) of the analysis, one with two $a\to b\bar{b}$ candidates in the High Purity Category (HPC), and the other with one $a\to b\bar{b}$ candidate in the High Purity Category (HPC) and one in the Low Purity Category (LPC).
Efficiency and acceptance for simulated $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ samples in two signal regions (SR) of the analysis, one with two $a\to b\bar{b}$ candidates in the High Purity Category (HPC), and the other with one $a\to b\bar{b}$ candidate in the High Purity Category (HPC) and one in the Low Purity Category (LPC).
Event yields for a simulated $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ sample with $m_a = 17.5\,\text{GeV}$. The signal sample is produced with cross section equals to the standard model $pp\to ZH$, i.e. $0.88\,\text{pb}$. Cut 0 corresponds to the initial number of events. Cut 1 requires the single lepton trigger. Cut 2 requires 2 identified leptons. Cut 3 requires the Z-boson mass window. Cut 4 requires 2 reconstructed $a\to b\bar{b}$ candidates. Cut 5a requires 2 identified $a\to b\bar{b}$ candidates in the 1HPC1LPC region. Cut 6a requires the 2 $a\to b\bar{b}$ candidates in the 1HPC1LPC region to be inside the Higgs mass window. Cut 5b requires 2 identified $a\to b\bar{b}$ candidates in the 2HPC region. Cut 6b requires the 2 $a\to b\bar{b}$ candidates in the 2HPC region to be inside the Higgs mass window.
Event yields for a simulated $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ sample with $m_a = 17.5\,\text{GeV}$. The signal sample is produced with cross section equals to the standard model $pp\to ZH$, i.e. $0.88\,\text{pb}$. Cut 0 corresponds to the initial number of events. Cut 1 requires the single lepton trigger. Cut 2 requires 2 identified leptons. Cut 3 requires the Z-boson mass window. Cut 4 requires 2 reconstructed $a\to b\bar{b}$ candidates. Cut 5a requires 2 identified $a\to b\bar{b}$ candidates in the 1HPC1LPC region. Cut 6a requires the 2 $a\to b\bar{b}$ candidates in the 1HPC1LPC region to be inside the Higgs mass window. Cut 5b requires 2 identified $a\to b\bar{b}$ candidates in the 2HPC region. Cut 6b requires the 2 $a\to b\bar{b}$ candidates in the 2HPC region to be inside the Higgs mass window.
Background yield table for Z+jets, $t\bar{t}$, and rare sources. Observed data yield. Signal $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ yield with $m_a = 20\,\text{GeV}$. The signal sample is produced with cross section equals to the standard model $pp\to ZH$, i.e. $0.88\,\text{pb}$, with a branching ratio set to 1 for the $H \rightarrow aa$ decay, whereas the ATLAS figure attached to this entry instead uses the upper-limit branching ratio (smaller than 1). The table includes the yields in two signal regions with leptons consistent with an on-shell Z-boson decay, one with 2 $a\to b\bar{b}$ candidates in the 2HPC region and one with 2 $a\to b\bar{b}$ candidates in the 1HPC1LPC region. The table also includes the yields in four control regions, one with leptons consistent with an on-shell Z-boson decay and 2 $a\to b\bar{b}$ candidates in the Low Purity Category (LPC), and three others where the leptons are not consistent an on-shell Z-boson decay.
Background yield table for Z+jets, $t\bar{t}$, and rare sources. Observed data yield. Signal $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ yield with $m_a = 20\,\text{GeV}$. The signal sample is produced with cross section equals to the standard model $pp\to ZH$, i.e. $0.88\,\text{pb}$. The table includes the yields in two signal regions with leptons consistent with an on-shell Z-boson decay, one with 2 $a\to b\bar{b}$ candidates in the 2HPC region and one with 2 $a\to b\bar{b}$ candidates in the 1HPC1LPC region. The table also includes the yields in four control regions, one with leptons consistent with an on-shell Z-boson decay and 2 $a\to b\bar{b}$ candidates in the Low Purity Category (LPC), and three others where the leptons are not consistent an on-shell Z-boson decay.
A search for direct pair production of scalar partners of the top quark (top squarks or scalar third-generation up-type leptoquarks) in the all-hadronic $t\bar{t}$ plus missing transverse momentum final state is presented. The analysis of 139 fb$^{-1}$ of ${\sqrt{s}=13}$ TeV proton-proton collision data collected using the ATLAS detector at the LHC yields no significant excess over the Standard Model background expectation. To interpret the results, a supersymmetric model is used where the top squark decays via $\tilde{t} \to t^{(*)} \tilde{\chi}^0_1$, with $t^{(*)}$ denoting an on-shell (off-shell) top quark and $\tilde{\chi}^0_1$ the lightest neutralino. Three specific event selections are optimised for the following scenarios. In the scenario where $m_{\tilde{t}}> m_t+m_{\tilde{\chi}^0_1}$, top squark masses are excluded in the range 400-1250 GeV for $\tilde{\chi}^0_1$ masses below $200$ GeV at 95 % confidence level. In the situation where $m_{\tilde{t}}\sim m_t+m_{\tilde{\chi}^0_1}$, top squark masses in the range 300-630 GeV are excluded, while in the case where $m_{\tilde{t}}< m_W+m_b+m_{\tilde{\chi}^0_1}$ (with $m_{\tilde{t}}-m_{\tilde{\chi}^0_1}\ge 5$ GeV), considered for the first time in an ATLAS all-hadronic search, top squark masses in the range 300-660 GeV are excluded. Limits are also set for scalar third-generation up-type leptoquarks, excluding leptoquarks with masses below $1240$ GeV when considering only leptoquark decays into a top quark and a neutrino.
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <br><br> <b>Exclusion contours:</b> <ul> <li><a href="?table=stop_obs">Stop exclusion contour (Obs.)</a> <li><a href="?table=stop_obs_down">Stop exclusion contour (Obs. Down)</a> <li><a href="?table=stop_obs_up">Stop exclusion contour (Obs. Up)</a> <li><a href="?table=stop_exp">Stop exclusion contour (Exp.)</a> <li><a href="?table=stop_exp_down">Stop exclusion contour (Exp. Down)</a> <li><a href="?table=stop_exp_up">Stop exclusion contour (Exp. Up)</a> <li><a href="?table=LQ3u_obs">LQ3u exclusion contour (Obs.)</a> <li><a href="?table=LQ3u_obs_down">LQ3u exclusion contour (Obs. Down)</a> <li><a href="?table=LQ3u_obs_up">LQ3u exclusion contour (Obs. Up)</a> <li><a href="?table=LQ3u_exp">LQ3u exclusion contour (Exp.)</a> <li><a href="?table=LQ3u_exp_down">LQ3u exclusion contour (Exp. Down)</a> <li><a href="?table=LQ3u_exp_up">LQ3u exclusion contour (Exp. Up)</a> </ul> <b>Upper limits:</b> <ul> <li><a href="?table=stop_xSecUpperLimit_obs">stop_xSecUpperLimit_obs</a> <li><a href="?table=stop_xSecUpperLimit_exp">stop_xSecUpperLimit_exp</a> <li><a href="?table=LQ3u_xSecUpperLimit_obs">LQ3u_xSecUpperLimit_obs</a> <li><a href="?table=LQ3u_xSecUpperLimit_exp">LQ3u_xSecUpperLimit_exp</a> </ul> <b>Kinematic distributions:</b> <ul> <li><a href="?table=SRATW_metsigST">SRATW_metsigST</a> <li><a href="?table=SRBTT_m_1fatjet_kt12">SRBTT_m_1fatjet_kt12</a> <li><a href="?table=SRC_RISR">SRC_RISR</a> <li><a href="?table=SRD0_htSig">SRD0_htSig</a> <li><a href="?table=SRD1_htSig">SRD1_htSig</a> <li><a href="?table=SRD2_htSig">SRD2_htSig</a> </ul> <b>Cut flows:</b> <ul> <li><a href="?table=cutflow_SRATT">cutflow_SRATT</a> <li><a href="?table=cutflow_SRATW">cutflow_SRATW</a> <li><a href="?table=cutflow_SRAT0">cutflow_SRAT0</a> <li><a href="?table=cutflow_SRB">cutflow_SRB</a> <li><a href="?table=cutflow_SRC">cutflow_SRC</a> <li><a href="?table=cutflow_SRD0">cutflow_SRD0</a> <li><a href="?table=cutflow_SRD1">cutflow_SRD1</a> <li><a href="?table=cutflow_SRD2">cutflow_SRD2</a> </ul> <b>Acceptance and efficiencies:</b> As explained in <a href="https://twiki.cern.ch/twiki/bin/view/AtlasPublic/SupersymmetryPublicResults#summary_of_auxiliary_material">the twiki</a>. <ul> <li> <b>SRATT:</b> <a href="?table=Acc_SRATT">Acc_SRATT</a> <a href="?table=Eff_SRATT">Eff_SRATT</a> <li> <b>SRATW:</b> <a href="?table=Acc_SRATW">Acc_SRATW</a> <a href="?table=Eff_SRATW">Eff_SRATW</a> <li> <b>SRAT0:</b> <a href="?table=Acc_SRAT0">Acc_SRAT0</a> <a href="?table=Eff_SRAT0">Eff_SRAT0</a> <li> <b>SRBTT:</b> <a href="?table=Acc_SRBTT">Acc_SRBTT</a> <a href="?table=Eff_SRBTT">Eff_SRBTT</a> <li> <b>SRBTW:</b> <a href="?table=Acc_SRBTW">Acc_SRBTW</a> <a href="?table=Eff_SRBTW">Eff_SRBTW</a> <li> <b>SRBT0:</b> <a href="?table=Acc_SRBT0">Acc_SRBT0</a> <a href="?table=Eff_SRBT0">Eff_SRBT0</a> <li> <b>SRC1:</b> <a href="?table=Acc_SRC1">Acc_SRC1</a> <a href="?table=Eff_SRC1">Eff_SRC1</a> <li> <b>SRC2:</b> <a href="?table=Acc_SRC2">Acc_SRC2</a> <a href="?table=Eff_SRC2">Eff_SRC2</a> <li> <b>SRC3:</b> <a href="?table=Acc_SRC3">Acc_SRC3</a> <a href="?table=Eff_SRC3">Eff_SRC3</a> <li> <b>SRC4:</b> <a href="?table=Acc_SRC4">Acc_SRC4</a> <a href="?table=Eff_SRC4">Eff_SRC4</a> <li> <b>SRC5:</b> <a href="?table=Acc_SRC5">Acc_SRC5</a> <a href="?table=Eff_SRC5">Eff_SRC5</a> <li> <b>SRD0:</b> <a href="?table=Acc_SRD0">Acc_SRD0</a> <a href="?table=Eff_SRD0">Eff_SRD0</a> <li> <b>SRD1:</b> <a href="?table=Acc_SRD1">Acc_SRD1</a> <a href="?table=Eff_SRD1">Eff_SRD1</a> <li> <b>SRD2:</b> <a href="?table=Acc_SRD2">Acc_SRD2</a> <a href="?table=Eff_SRD2">Eff_SRD2</a> </ul> <b>Truth Code snippets</b> and <b>SLHA</a> files are available under "Resources" (purple button on the left)
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <br><br> <b>Exclusion contours:</b> <ul> <li><a href="?table=stop_obs">Stop exclusion contour (Obs.)</a> <li><a href="?table=stop_obs_down">Stop exclusion contour (Obs. Down)</a> <li><a href="?table=stop_obs_up">Stop exclusion contour (Obs. Up)</a> <li><a href="?table=stop_exp">Stop exclusion contour (Exp.)</a> <li><a href="?table=stop_exp_down">Stop exclusion contour (Exp. Down)</a> <li><a href="?table=stop_exp_up">Stop exclusion contour (Exp. Up)</a> <li><a href="?table=LQ3u_obs">LQ3u exclusion contour (Obs.)</a> <li><a href="?table=LQ3u_obs_down">LQ3u exclusion contour (Obs. Down)</a> <li><a href="?table=LQ3u_obs_up">LQ3u exclusion contour (Obs. Up)</a> <li><a href="?table=LQ3u_exp">LQ3u exclusion contour (Exp.)</a> <li><a href="?table=LQ3u_exp_down">LQ3u exclusion contour (Exp. Down)</a> <li><a href="?table=LQ3u_exp_up">LQ3u exclusion contour (Exp. Up)</a> </ul> <b>Upper limits:</b> <ul> <li><a href="?table=stop_xSecUpperLimit_obs">stop_xSecUpperLimit_obs</a> <li><a href="?table=stop_xSecUpperLimit_exp">stop_xSecUpperLimit_exp</a> <li><a href="?table=LQ3u_xSecUpperLimit_obs">LQ3u_xSecUpperLimit_obs</a> <li><a href="?table=LQ3u_xSecUpperLimit_exp">LQ3u_xSecUpperLimit_exp</a> </ul> <b>Kinematic distributions:</b> <ul> <li><a href="?table=SRATW_metsigST">SRATW_metsigST</a> <li><a href="?table=SRBTT_m_1fatjet_kt12">SRBTT_m_1fatjet_kt12</a> <li><a href="?table=SRC_RISR">SRC_RISR</a> <li><a href="?table=SRD0_htSig">SRD0_htSig</a> <li><a href="?table=SRD1_htSig">SRD1_htSig</a> <li><a href="?table=SRD2_htSig">SRD2_htSig</a> </ul> <b>Cut flows:</b> <ul> <li><a href="?table=cutflow_SRATT">cutflow_SRATT</a> <li><a href="?table=cutflow_SRATW">cutflow_SRATW</a> <li><a href="?table=cutflow_SRAT0">cutflow_SRAT0</a> <li><a href="?table=cutflow_SRB">cutflow_SRB</a> <li><a href="?table=cutflow_SRC">cutflow_SRC</a> <li><a href="?table=cutflow_SRD0">cutflow_SRD0</a> <li><a href="?table=cutflow_SRD1">cutflow_SRD1</a> <li><a href="?table=cutflow_SRD2">cutflow_SRD2</a> </ul> <b>Acceptance and efficiencies:</b> As explained in <a href="https://twiki.cern.ch/twiki/bin/view/AtlasPublic/SupersymmetryPublicResults#summary_of_auxiliary_material">the twiki</a>. <ul> <li> <b>SRATT:</b> <a href="?table=Acc_SRATT">Acc_SRATT</a> <a href="?table=Eff_SRATT">Eff_SRATT</a> <li> <b>SRATW:</b> <a href="?table=Acc_SRATW">Acc_SRATW</a> <a href="?table=Eff_SRATW">Eff_SRATW</a> <li> <b>SRAT0:</b> <a href="?table=Acc_SRAT0">Acc_SRAT0</a> <a href="?table=Eff_SRAT0">Eff_SRAT0</a> <li> <b>SRBTT:</b> <a href="?table=Acc_SRBTT">Acc_SRBTT</a> <a href="?table=Eff_SRBTT">Eff_SRBTT</a> <li> <b>SRBTW:</b> <a href="?table=Acc_SRBTW">Acc_SRBTW</a> <a href="?table=Eff_SRBTW">Eff_SRBTW</a> <li> <b>SRBT0:</b> <a href="?table=Acc_SRBT0">Acc_SRBT0</a> <a href="?table=Eff_SRBT0">Eff_SRBT0</a> <li> <b>SRC1:</b> <a href="?table=Acc_SRC1">Acc_SRC1</a> <a href="?table=Eff_SRC1">Eff_SRC1</a> <li> <b>SRC2:</b> <a href="?table=Acc_SRC2">Acc_SRC2</a> <a href="?table=Eff_SRC2">Eff_SRC2</a> <li> <b>SRC3:</b> <a href="?table=Acc_SRC3">Acc_SRC3</a> <a href="?table=Eff_SRC3">Eff_SRC3</a> <li> <b>SRC4:</b> <a href="?table=Acc_SRC4">Acc_SRC4</a> <a href="?table=Eff_SRC4">Eff_SRC4</a> <li> <b>SRC5:</b> <a href="?table=Acc_SRC5">Acc_SRC5</a> <a href="?table=Eff_SRC5">Eff_SRC5</a> <li> <b>SRD0:</b> <a href="?table=Acc_SRD0">Acc_SRD0</a> <a href="?table=Eff_SRD0">Eff_SRD0</a> <li> <b>SRD1:</b> <a href="?table=Acc_SRD1">Acc_SRD1</a> <a href="?table=Eff_SRD1">Eff_SRD1</a> <li> <b>SRD2:</b> <a href="?table=Acc_SRD2">Acc_SRD2</a> <a href="?table=Eff_SRD2">Eff_SRD2</a> </ul> <b>Truth Code snippets</b> and <b>SLHA</a> files are available under "Resources" (purple button on the left)
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contour are excluded.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contour are excluded.
The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.
The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
Model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.
Model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.
Expected model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.
Expected model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.
Model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.
Model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.
Expected model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.
Expected model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.
The distributions of $S$ in SRA-TW. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $S$ in SRA-TW. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $\it{m}^{\mathrm{R=1.2}}_{1}$ in SRB-TT. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $\it{m}^{\mathrm{R=1.2}}_{1}$ in SRB-TT. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of R$_{ISR}$ in SRC signal regions before R$_{ISR}$ cuts are applied. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of R$_{ISR}$ in SRC signal regions before R$_{ISR}$ cuts are applied. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD0. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD0. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD1. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD1. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD2. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD2. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TT. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TT. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TW. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TW. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-T0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-T0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (700,400)\ \mathrm{GeV} $ in signal regions SRB-TT, SRB-TW and SRB-T0. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 60000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (700,400)\ \mathrm{GeV} $ in signal regions SRB-TT, SRB-TW and SRB-T0. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 60000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (500,327)\ \mathrm{GeV} $ in regions SRC-1, SRC-2, SRC-3, SRC-4 and SRC-5. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 150000 raw MC events with filter efficiency of 0.384 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (500,327)\ \mathrm{GeV} $ in regions SRC-1, SRC-2, SRC-3, SRC-4 and SRC-5. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 150000 raw MC events with filter efficiency of 0.384 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD1. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD1. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD2. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD2. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Signal acceptance in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.
Signal efficiency in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.
Signal acceptance in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.
Signal acceptance in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.
Signal efficiency in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
A search for heavy neutral Higgs bosons is performed using the LHC Run 2 data, corresponding to an integrated luminosity of 139 fb$^{-1}$ of proton-proton collisions at $\sqrt{s}=13$ TeV recorded with the ATLAS detector. The search for heavy resonances is performed over the mass range 0.2-2.5 TeV for the $\tau^+\tau^-$ decay with at least one $\tau$-lepton decaying into final states with hadrons. The data are in good agreement with the background prediction of the Standard Model. In the $M_{h}^{125}$ scenario of the Minimal Supersymmetric Standard Model, values of $\tan\beta>8$ and $\tan\beta>21$ are excluded at the 95% confidence level for neutral Higgs boson masses of 1.0 TeV and 1.5 TeV, respectively, where $\tan\beta$ is the ratio of the vacuum expectation values of the two Higgs doublets.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits with one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell $W$ and $Z$ bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of $\sqrt{s}$ = 13 TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139 fb$^{-1}$. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015-2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full dataset are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV.
Distributions in SR-low of the data and post-fit background prediction for m<sub>T</sub>. The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for m<sub>T</sub>. The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for H<sup>boost</sup>. The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for H<sup>boost</sup>. The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for m<sub>eff</sub><sup>3ℓ</sup>/H<sup>boost</sup>. The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for m<sub>eff</sub><sup>3ℓ</sup>/H<sup>boost</sup>. The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for p<sub>T</sub><sup>soft</sup>/(p<sub>T</sub><sup>soft</sup> + m<sub>eff</sub><sup>3ℓ</sup>). The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for p<sub>T</sub><sup>soft</sup>/(p<sub>T</sub><sup>soft</sup> + m<sub>eff</sub><sup>3ℓ</sup>). The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for m<sub>T</sub>. The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for m<sub>T</sub>. The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for R(E<sub>T</sub><sup>miss</sup>,jets). The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for R(E<sub>T</sub><sup>miss</sup>,jets). The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for p<sub>T</sub><sup>soft</sup>. The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for p<sub>T</sub><sup>soft</sup>. The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for p<sub>T</sub><sup>jets</sup>. The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for p<sub>T</sub><sup>jets</sup>. The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Observed exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Observed exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Expected exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Expected exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Plus 1$\sigma$ uncertainty, varying the signal cross section within its uncertainty, on the observed exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Plus 1$\sigma$ uncertainty, varying the signal cross section within its uncertainty, on the observed exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Minus 1$\sigma$ uncertainty, varying the signal cross section within its uncertainty, on the observed exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Minus 1$\sigma$ uncertainty, varying the signal cross section within its uncertainty, on the observed exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Plus 1$\sigma$ uncertainty, due to uncertainties in the background prediction and experimental uncertainties affecting the signal, on the expected exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Plus 1$\sigma$ uncertainty, due to uncertainties in the background prediction and experimental uncertainties affecting the signal, on the expected exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Minus 1$\sigma$ uncertainty, due to uncertainties in the background prediction and experimental uncertainties affecting the signal, on the expected exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Minus 1$\sigma$ uncertainty, due to uncertainties in the background prediction and experimental uncertainties affecting the signal, on the expected exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Upper limits on observed wino-bino simplified model signal cross section $\sigma_\text{obs}^\text{95}$.
Upper limits on observed wino-bino simplified model signal cross section $\sigma_\text{obs}^\text{95}$.
Upper limits on expected wino-bino simplified model signal cross section $\sigma_\text{exp}^\text{95}$.
Upper limits on expected wino-bino simplified model signal cross section $\sigma_\text{exp}^\text{95}$.
Signal acceptance in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal acceptance in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal efficiency in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal efficiency in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal acceptance in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal acceptance in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal efficiency in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal efficiency in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal acceptance in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal acceptance in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal efficiency in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal efficiency in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal acceptance in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal acceptance in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal efficiency in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal efficiency in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
The observed and expected yields after the background-only fit in the SRs. The normalization factors of the $WZ$ sample for the low-mass and ISR regions are different and are treated separately in the combined fit. \The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. Combined statistical and systematic uncertainties are presented. The individual uncertainties can be correlated and do not necessarily add in quadrature to equal the total background uncertainty.
The observed and expected yields after the background-only fit in the SRs. The normalization factors of the $WZ$ sample for the low-mass and ISR regions are different and are treated separately in the combined fit. \The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. Combined statistical and systematic uncertainties are presented. The individual uncertainties can be correlated and do not necessarily add in quadrature to equal the total background uncertainty.
Summary of the expected background and data yields in $\text{SR-low}$ and $\text{SR-ISR}$. The second and third columns show the data and total expected background with systematic uncertainties. The fourth column gives the model-independent upper limits at 95\% CL on the visible cross section ($\sigma_\text{vis}$). The fifth and sixth columns give the visible number of observed ($S^{95}_\text{obs}$) and expected ($S^{95}_\text{exp}$) events of a generic beyond-the-SM process, where uncertainties on $S^{95}_\text{exp}$ reflect the $\pm 1 \sigma$ uncertainties on the background estimation. The last column shows the discovery $p$-value and Gaussian significance $Z$ assuming no signal.
Summary of the expected background and data yields in $\text{SR-low}$ and $\text{SR-ISR}$. The second and third columns show the data and total expected background with systematic uncertainties. The fourth column gives the model-independent upper limits at 95\% CL on the visible cross section ($\sigma_\text{vis}$). The fifth and sixth columns give the visible number of observed ($S^{95}_\text{obs}$) and expected ($S^{95}_\text{exp}$) events of a generic beyond-the-SM process, where uncertainties on $S^{95}_\text{exp}$ reflect the $\pm 1 \sigma$ uncertainties on the background estimation. The last column shows the discovery $p$-value and Gaussian significance $Z$ assuming no signal.
Upper limits on observed (expected) wino-bino simplified model signal cross section $\sigma_\text{obs(exp)}^\text{95}$.
Upper limits on observed (expected) wino-bino simplified model signal cross section $\sigma_\text{obs(exp)}^\text{95}$.
Full list of event selections and MC generator-weighted yields and in $\text{SR-ISR}$ for the main $WZ$ background and a representative $\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2}$ signal point of mass 200 GeV and mass splitting $\Delta m = 100$ GeV normalized to 139 fb$^{-1}$. 40000 events were generated.
Full list of event selections and MC generator-weighted yields and in $\text{SR-ISR}$ for the main $WZ$ background and a representative $\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2}$ signal point of mass 200 GeV and mass splitting $\Delta m = 100$ GeV normalized to 139 fb$^{-1}$. 40000 events were generated.
Full list of event selections and MC generator-weighted yields and in $\text{SR-low}$ for the main $WZ$ background and a representative $\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2}$ signal point of mass 200 GeV and mass splitting $\Delta m = 100$ GeV normalized to 139 fb$^{-1}$. 40000 events were generated.
Full list of event selections and MC generator-weighted yields and in $\text{SR-low}$ for the main $WZ$ background and a representative $\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2}$ signal point of mass 200 GeV and mass splitting $\Delta m = 100$ GeV normalized to 139 fb$^{-1}$. 40000 events were generated.
The results of a search for electroweakino pair production $pp \rightarrow \tilde\chi^\pm_1 \tilde\chi^0_2$ in which the chargino ($\tilde\chi^\pm_1$) decays into a $W$ boson and the lightest neutralino ($\tilde\chi^0_1$), while the heavier neutralino ($\tilde\chi^0_2$) decays into the Standard Model 125 GeV Higgs boson and a second $\tilde\chi^0_1$ are presented. The signal selection requires a pair of $b$-tagged jets consistent with those from a Higgs boson decay, and either an electron or a muon from the $W$ boson decay, together with missing transverse momentum from the corresponding neutrino and the stable neutralinos. The analysis is based on data corresponding to 139 $\mathrm{fb}^{-1}$ of $\sqrt{s}=13$ TeV $pp$ collisions provided by the Large Hadron Collider and recorded by the ATLAS detector. No statistically significant evidence of an excess of events above the Standard Model expectation is found. Limits are set on the direct production of the electroweakinos in simplified models, assuming pure wino cross-sections. Masses of $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ up to 740 GeV are excluded at 95% confidence level for a massless $\tilde{\chi}^{0}_{1}$.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
A search for supersymmetric partners of gluons and quarks is presented, involving signatures with jets and either two isolated leptons (electrons or muons) with the same electric charge, or at least three isolated leptons. A data sample of proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded with the ATLAS detector at the Large Hadron Collider between 2015 and 2018, corresponding to a total integrated luminosity of 139 fb$^{-1}$, is used for the search. No significant excess over the Standard Model expectation is observed. The results are interpreted in simplified supersymmetric models featuring both R-parity conservation and R-parity violation, raising the exclusion limits beyond those of previous ATLAS searches to 1600 GeV for gluino masses and 750 GeV for bottom and top squark masses in these scenarios.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
A search for the electroweak production of charginos and sleptons decaying into final states with two electrons or muons is presented. The analysis is based on 139 fb$^{-1}$ of proton-proton collisions recorded by the ATLAS detector at the Large Hadron Collider at $\sqrt{s}=13$ TeV. Three $R$-parity-conserving scenarios where the lightest neutralino is the lightest supersymmetric particle are considered: the production of chargino pairs with decays via either $W$ bosons or sleptons, and the direct production of slepton pairs. The analysis is optimised for the first of these scenarios, but the results are also interpreted in the others. No significant deviations from the Standard Model expectations are observed and limits at 95 % confidence level are set on the masses of relevant supersymmetric particles in each of the scenarios. For a massless lightest neutralino, masses up to 420 GeV are excluded for the production of the lightest-chargino pairs assuming $W$-boson-mediated decays and up to 1 TeV for slepton-mediated decays, whereas for slepton-pair production masses up to 700 GeV are excluded assuming three generations of mass-degenerate sleptons.
- - - - - - - - Overview of HEPData Record - - - - - - - - <br/><br/> <b>Background Fit results:</b> <ul> <li><a href="89413?version=1&table=Backgroundfit1">CRs</a> <li><a href="89413?version=1&table=Backgroundfit2">VRs</a> <li><a href="89413?version=1&table=Backgroundfit5">inclusive DF-0J SRs</a> <li><a href="89413?version=1&table=Backgroundfit6">inclusive DF-1J SRs</a> <li><a href="89413?version=1&table=Backgroundfit3">inclusive SF-0J SRs</a> <li><a href="89413?version=1&table=Backgroundfit4">inclusive SF-1J SRs</a> </ul> <b>Kinematic distributions in VRs:</b> <ul> <li><a href="89413?version=1&table=VRkinematics1">$m_{T2}$ in VR-top-low</a> <li><a href="89413?version=1&table=VRkinematics2">$m_{T2}$ in VR-top-high</a> <li><a href="89413?version=1&table=VRkinematics3">$E_T^{miss}$ in VR-WW-0J</a> <li><a href="89413?version=1&table=VRkinematics4">$E_T^{miss}$ in VR-WW-1J</a> <li><a href="89413?version=1&table=VRkinematics5">$E_T^{miss}$ sig in VR-VZ</a> <li><a href="89413?version=1&table=VRkinematics6">$E_T^{miss}$ sig in VR-top-WW</a> </ul> <b>Kinematic distributions in SRs:</b> <ul> <li><a href="89413?version=1&table=SRkinematics1">$m_{T2}$ in SR-SF-0J</a> <li><a href="89413?version=1&table=SRkinematics2">$m_{T2}$ in SR-SF-1J</a> <li><a href="89413?version=1&table=SRkinematics3">$m_{T2}$ in SR-DF-0J</a> <li><a href="89413?version=1&table=SRkinematics4">$m_{T2}$ in SR-DF-1J</a> </ul> <b>Systematic uncertaities:</b> <ul> <li><a href="89413?version=1&table=Systematic uncertainties">dominant systematic uncertainties in the inclusive SRs</a> </ul> <b>Exclusion contours:</b> <ul> <li><a href="89413?version=1&table=Exclusioncontour(obs)1">expected exclusion contour direct chargino-pair production via W decay grid</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)1">observed exclusion contour direct chargino-pair production via W decay grid</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)2">expected exclusion contour direct chargino-pair production via slepton decay grid</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)2">observed exclusion contour direct chargino-pair production via slepton decay grid</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)3">expected exclusion contour direct slepton-pair production grid</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)3">observed exclusion contour direct slepton-pair production grid</a> </ul> <br/><br/><b>AUXILIARY MATERIAL</b><br/> <b>Background Fit in binned SRs:</b> <ul> <li><a href="89413?version=1&table=Backgroundfit7">binned DF-0J SRs</a> <li><a href="89413?version=1&table=Backgroundfit8">binned DF-1J SRs</a> <li><a href="89413?version=1&table=Backgroundfit9">binned SF-0J SRs</a> <li><a href="89413?version=1&table=Backgroundfit10">binned SF-1J SRs</a> </ul> <b>Exclusion contours:</b> <ul> <li><a href="89413?version=1&table=Exclusioncontour(obs)4">expected exclusion contour left-handed slepton-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)4">observed exclusion contour left-handed slepton-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)5">expected exclusion contour right-handed slepton-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)5">observed exclusion contour right-handed slepton-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)6">expected exclusion contour selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)6">observed exclusion contour selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)7">expected exclusion contour left-handed selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)7">observed exclusion contour left-handed selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)8">expected exclusion contour right-handed selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)8">observed exclusion contour right-handed selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)9">expected exclusion contour smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)9">observed exclusion contour smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)10">expected exclusion contour left-handed smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)10">observed exclusion contour left-handed smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)11">expected exclusion contour right-handed smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)11">observed exclusion contour right-handed smuon-pair production</a> </ul> <b>Cross section upper limits:</b> <ul> <li><a href="89413?version=1&table=xsecupperlimits1">upper limits on signal cross section for direct chargino-pair production via W decay</a> <li><a href="89413?version=1&table=xsecupperlimits2">upper limits on signal cross section for direct chargino-pair production via slepton decay</a> <li><a href="89413?version=1&table=xsecupperlimits3">upper limits on signal cross section for direct slepton-pair production</a> </ul> <b>Acceptances and Efficiencies for direct chargino-pair production via W decay grid </b> <ul> <li> <b>Acceptance</b> <br/> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[100,inf)forC1C1WWgrid">SR-DF-0J-[100,inf) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[160,inf)forC1C1WWgrid">SR-DF-0J-[160,inf) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[100,120)forC1C1WWgrid">SR-DF-0J-[100,120) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[120,160)forC1C1WWgrid">SR-DF-0J-[120,160) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[100,105)forC1C1WWgrid">SR-DF-0J-[100,105) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[105,110)forC1C1WWgrid">SR-DF-0J-[105,110) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[110,120)forC1C1WWgrid">SR-DF-0J-[110,120) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[120,140)forC1C1WWgrid">SR-DF-0J-[120,140) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[140,160)forC1C1WWgrid">SR-DF-0J-[140,160) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[160,180)forC1C1WWgrid">SR-DF-0J-[160,180) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[180,220)forC1C1WWgrid">SR-DF-0J-[180,220) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[220,260)forC1C1WWgrid">SR-DF-0J-[220,260) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[260,inf)forC1C1WWgrid">SR-DF-0J-[260,inf) </a><br/> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[100,inf)forC1C1WWgrid">SR-DF-1J-[100,inf) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[160,inf)forC1C1WWgrid">SR-DF-1J-[160,inf) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[100,120)forC1C1WWgrid">SR-DF-1J-[100,120) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[120,160)forC1C1WWgrid">SR-DF-1J-[120,160) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[100,105)forC1C1WWgrid">SR-DF-1J-[100,105) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[105,110)forC1C1WWgrid">SR-DF-1J-[105,110) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[110,120)forC1C1WWgrid">SR-DF-1J-[110,120) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[120,140)forC1C1WWgrid">SR-DF-1J-[120,140) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[140,160)forC1C1WWgrid">SR-DF-1J-[140,160) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[160,180)forC1C1WWgrid">SR-DF-1J-[160,180) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[180,220)forC1C1WWgrid">SR-DF-1J-[180,220) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[220,260)forC1C1WWgrid">SR-DF-1J-[220,260) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[260,inf)forC1C1WWgrid">SR-DF-1J-[260,inf) </a><br/> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[100,inf)forC1C1WWgrid">SR-SF-0J-[100,inf) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[160,inf)forC1C1WWgrid">SR-SF-0J-[160,inf) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[100,120)forC1C1WWgrid">SR-SF-0J-[100,120) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[120,160)forC1C1WWgrid">SR-SF-0J-[120,160) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[100,105)forC1C1WWgrid">SR-SF-0J-[100,105) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[105,110)forC1C1WWgrid">SR-SF-0J-[105,110) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[110,120)forC1C1WWgrid">SR-SF-0J-[110,120) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[120,140)forC1C1WWgrid">SR-SF-0J-[120,140) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[140,160)forC1C1WWgrid">SR-SF-0J-[140,160) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[160,180)forC1C1WWgrid">SR-SF-0J-[160,180) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[180,220)forC1C1WWgrid">SR-SF-0J-[180,220) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[220,260)forC1C1WWgrid">SR-SF-0J-[220,260) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[260,inf)forC1C1WWgrid">SR-SF-0J-[260,inf) </a><br/> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[100,inf)forC1C1WWgrid">SR-SF-1J-[100,inf) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[160,inf)forC1C1WWgrid">SR-SF-1J-[160,inf) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[100,120)forC1C1WWgrid">SR-SF-1J-[100,120) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[120,160)forC1C1WWgrid">SR-SF-1J-[120,160) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[100,105)forC1C1WWgrid">SR-SF-1J-[100,105) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[105,110)forC1C1WWgrid">SR-SF-1J-[105,110) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[110,120)forC1C1WWgrid">SR-SF-1J-[110,120) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[120,140)forC1C1WWgrid">SR-SF-1J-[120,140) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[140,160)forC1C1WWgrid">SR-SF-1J-[140,160) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[160,180)forC1C1WWgrid">SR-SF-1J-[160,180) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[180,220)forC1C1WWgrid">SR-SF-1J-[180,220) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[220,260)forC1C1WWgrid">SR-SF-1J-[220,260) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[260,inf)forC1C1WWgrid">SR-SF-1J-[260,inf) </a><br/> <li> <b>Efficiency</b> <br/> <a href="89413?version=1&table=EfficiencySR-DF-0J-[100,inf)forC1C1WWgrid">SR-DF-0J-[100,inf) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[160,inf)forC1C1WWgrid">SR-DF-0J-[160,inf) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[100,120)forC1C1WWgrid">SR-DF-0J-[100,120) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[120,160)forC1C1WWgrid">SR-DF-0J-[120,160) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[100,105)forC1C1WWgrid">SR-DF-0J-[100,105) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[105,110)forC1C1WWgrid">SR-DF-0J-[105,110) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[110,120)forC1C1WWgrid">SR-DF-0J-[110,120) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[120,140)forC1C1WWgrid">SR-DF-0J-[120,140) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[140,160)forC1C1WWgrid">SR-DF-0J-[140,160) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[160,180)forC1C1WWgrid">SR-DF-0J-[160,180) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[180,220)forC1C1WWgrid">SR-DF-0J-[180,220) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[220,260)forC1C1WWgrid">SR-DF-0J-[220,260) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[260,inf)forC1C1WWgrid">SR-DF-0J-[260,inf) </a><br/> <a href="89413?version=1&table=EfficiencySR-DF-1J-[100,inf)forC1C1WWgrid">SR-DF-1J-[100,inf) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[160,inf)forC1C1WWgrid">SR-DF-1J-[160,inf) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[100,120)forC1C1WWgrid">SR-DF-1J-[100,120) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[120,160)forC1C1WWgrid">SR-DF-1J-[120,160) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[100,105)forC1C1WWgrid">SR-DF-1J-[100,105) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[105,110)forC1C1WWgrid">SR-DF-1J-[105,110) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[110,120)forC1C1WWgrid">SR-DF-1J-[110,120) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[120,140)forC1C1WWgrid">SR-DF-1J-[120,140) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[140,160)forC1C1WWgrid">SR-DF-1J-[140,160) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[160,180)forC1C1WWgrid">SR-DF-1J-[160,180) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[180,220)forC1C1WWgrid">SR-DF-1J-[180,220) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[220,260)forC1C1WWgrid">SR-DF-1J-[220,260) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[260,inf)forC1C1WWgrid">SR-DF-1J-[260,inf) </a><br/> <a href="89413?version=1&table=EfficiencySR-SF-0J-[100,inf)forC1C1WWgrid">SR-SF-0J-[100,inf) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[160,inf)forC1C1WWgrid">SR-SF-0J-[160,inf) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[100,120)forC1C1WWgrid">SR-SF-0J-[100,120) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[120,160)forC1C1WWgrid">SR-SF-0J-[120,160) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[100,105)forC1C1WWgrid">SR-SF-0J-[100,105) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[105,110)forC1C1WWgrid">SR-SF-0J-[105,110) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[110,120)forC1C1WWgrid">SR-SF-0J-[110,120) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[120,140)forC1C1WWgrid">SR-SF-0J-[120,140) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[140,160)forC1C1WWgrid">SR-SF-0J-[140,160) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[160,180)forC1C1WWgrid">SR-SF-0J-[160,180) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[180,220)forC1C1WWgrid">SR-SF-0J-[180,220) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[220,260)forC1C1WWgrid">SR-SF-0J-[220,260) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[260,inf)forC1C1WWgrid">SR-SF-0J-[260,inf) </a><br/> <a href="89413?version=1&table=EfficiencySR-SF-1J-[100,inf)forC1C1WWgrid">SR-SF-1J-[100,inf) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[160,inf)forC1C1WWgrid">SR-SF-1J-[160,inf) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[100,120)forC1C1WWgrid">SR-SF-1J-[100,120) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[120,160)forC1C1WWgrid">SR-SF-1J-[120,160) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[100,105)forC1C1WWgrid">SR-SF-1J-[100,105) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[105,110)forC1C1WWgrid">SR-SF-1J-[105,110) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[110,120)forC1C1WWgrid">SR-SF-1J-[110,120) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[120,140)forC1C1WWgrid">SR-SF-1J-[120,140) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[140,160)forC1C1WWgrid">SR-SF-1J-[140,160) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[160,180)forC1C1WWgrid">SR-SF-1J-[160,180) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[180,220)forC1C1WWgrid">SR-SF-1J-[180,220) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[220,260)forC1C1WWgrid">SR-SF-1J-[220,260) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[260,inf)forC1C1WWgrid">SR-SF-1J-[260,inf) </a><br/> </ul> <b>Cutflow:</b> <ul> <li><a href="89413?version=1&table=Cutflow1">Cutflow for direct chargino-pair production via W decay $m(\tilde{\chi}^{\pm}_1,\tilde{\chi}^{0}_1)=(300,50) GeV$</a> <li><a href="89413?version=1&table=Cutflow1">Cutflow for direct chargino-pair production via slepton decay $m(\tilde{\chi}^{\pm}_1,\tilde{l},\tilde{\chi}^{0}_1)=(600,300,1) GeV$</a> <li><a href="89413?version=1&table=Cutflow1">Cutflow for direct slepton-pair production $m(\tilde{l},\tilde{\chi}^{0}_1)=(400,200) GeV$</a> </ul> <b>Truth Code snippets</b> are available under "Resources" (purple button on the left)
- - - - - - - - Overview of HEPData Record - - - - - - - - <br/><br/> <b>Background Fit results:</b> <ul> <li><a href="89413?version=1&table=Backgroundfit1">CRs</a> <li><a href="89413?version=1&table=Backgroundfit2">VRs</a> <li><a href="89413?version=1&table=Backgroundfit5">inclusive DF-0J SRs</a> <li><a href="89413?version=1&table=Backgroundfit6">inclusive DF-1J SRs</a> <li><a href="89413?version=1&table=Backgroundfit3">inclusive SF-0J SRs</a> <li><a href="89413?version=1&table=Backgroundfit4">inclusive SF-1J SRs</a> </ul> <b>Kinematic distributions in VRs:</b> <ul> <li><a href="89413?version=1&table=VRkinematics1">$m_{T2}$ in VR-top-low</a> <li><a href="89413?version=1&table=VRkinematics2">$m_{T2}$ in VR-top-high</a> <li><a href="89413?version=1&table=VRkinematics3">$E_T^{miss}$ in VR-WW-0J</a> <li><a href="89413?version=1&table=VRkinematics4">$E_T^{miss}$ in VR-WW-1J</a> <li><a href="89413?version=1&table=VRkinematics5">$E_T^{miss}$ sig in VR-VZ</a> <li><a href="89413?version=1&table=VRkinematics6">$E_T^{miss}$ sig in VR-top-WW</a> </ul> <b>Kinematic distributions in SRs:</b> <ul> <li><a href="89413?version=1&table=SRkinematics1">$m_{T2}$ in SR-SF-0J</a> <li><a href="89413?version=1&table=SRkinematics2">$m_{T2}$ in SR-SF-1J</a> <li><a href="89413?version=1&table=SRkinematics3">$m_{T2}$ in SR-DF-0J</a> <li><a href="89413?version=1&table=SRkinematics4">$m_{T2}$ in SR-DF-1J</a> </ul> <b>Systematic uncertaities:</b> <ul> <li><a href="89413?version=1&table=Systematic uncertainties">dominant systematic uncertainties in the inclusive SRs</a> </ul> <b>Exclusion contours:</b> <ul> <li><a href="89413?version=1&table=Exclusioncontour(obs)1">expected exclusion contour direct chargino-pair production via W decay grid</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)1">observed exclusion contour direct chargino-pair production via W decay grid</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)2">expected exclusion contour direct chargino-pair production via slepton decay grid</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)2">observed exclusion contour direct chargino-pair production via slepton decay grid</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)3">expected exclusion contour direct slepton-pair production grid</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)3">observed exclusion contour direct slepton-pair production grid</a> </ul> <br/><br/><b>AUXILIARY MATERIAL</b><br/> <b>Background Fit in binned SRs:</b> <ul> <li><a href="89413?version=1&table=Backgroundfit7">binned DF-0J SRs</a> <li><a href="89413?version=1&table=Backgroundfit8">binned DF-1J SRs</a> <li><a href="89413?version=1&table=Backgroundfit9">binned SF-0J SRs</a> <li><a href="89413?version=1&table=Backgroundfit10">binned SF-1J SRs</a> </ul> <b>Exclusion contours:</b> <ul> <li><a href="89413?version=1&table=Exclusioncontour(obs)4">expected exclusion contour left-handed slepton-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)4">observed exclusion contour left-handed slepton-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)5">expected exclusion contour right-handed slepton-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)5">observed exclusion contour right-handed slepton-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)6">expected exclusion contour selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)6">observed exclusion contour selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)7">expected exclusion contour left-handed selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)7">observed exclusion contour left-handed selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)8">expected exclusion contour right-handed selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)8">observed exclusion contour right-handed selectron-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)9">expected exclusion contour smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)9">observed exclusion contour smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)10">expected exclusion contour left-handed smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)10">observed exclusion contour left-handed smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(obs)11">expected exclusion contour right-handed smuon-pair production</a> <li><a href="89413?version=1&table=Exclusioncontour(exp)11">observed exclusion contour right-handed smuon-pair production</a> </ul> <b>Cross section upper limits:</b> <ul> <li><a href="89413?version=1&table=xsecupperlimits1">upper limits on signal cross section for direct chargino-pair production via W decay</a> <li><a href="89413?version=1&table=xsecupperlimits2">upper limits on signal cross section for direct chargino-pair production via slepton decay</a> <li><a href="89413?version=1&table=xsecupperlimits3">upper limits on signal cross section for direct slepton-pair production</a> </ul> <b>Acceptances and Efficiencies for direct chargino-pair production via W decay grid </b> <ul> <li> <b>Acceptance</b> <br/> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[100,inf)forC1C1WWgrid">SR-DF-0J-[100,inf) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[160,inf)forC1C1WWgrid">SR-DF-0J-[160,inf) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[100,120)forC1C1WWgrid">SR-DF-0J-[100,120) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[120,160)forC1C1WWgrid">SR-DF-0J-[120,160) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[100,105)forC1C1WWgrid">SR-DF-0J-[100,105) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[105,110)forC1C1WWgrid">SR-DF-0J-[105,110) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[110,120)forC1C1WWgrid">SR-DF-0J-[110,120) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[120,140)forC1C1WWgrid">SR-DF-0J-[120,140) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[140,160)forC1C1WWgrid">SR-DF-0J-[140,160) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[160,180)forC1C1WWgrid">SR-DF-0J-[160,180) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[180,220)forC1C1WWgrid">SR-DF-0J-[180,220) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[220,260)forC1C1WWgrid">SR-DF-0J-[220,260) </a> <a href="89413?version=1&table=AcceptanceSR-DF-0J-[260,inf)forC1C1WWgrid">SR-DF-0J-[260,inf) </a><br/> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[100,inf)forC1C1WWgrid">SR-DF-1J-[100,inf) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[160,inf)forC1C1WWgrid">SR-DF-1J-[160,inf) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[100,120)forC1C1WWgrid">SR-DF-1J-[100,120) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[120,160)forC1C1WWgrid">SR-DF-1J-[120,160) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[100,105)forC1C1WWgrid">SR-DF-1J-[100,105) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[105,110)forC1C1WWgrid">SR-DF-1J-[105,110) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[110,120)forC1C1WWgrid">SR-DF-1J-[110,120) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[120,140)forC1C1WWgrid">SR-DF-1J-[120,140) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[140,160)forC1C1WWgrid">SR-DF-1J-[140,160) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[160,180)forC1C1WWgrid">SR-DF-1J-[160,180) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[180,220)forC1C1WWgrid">SR-DF-1J-[180,220) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[220,260)forC1C1WWgrid">SR-DF-1J-[220,260) </a> <a href="89413?version=1&table=AcceptanceSR-DF-1J-[260,inf)forC1C1WWgrid">SR-DF-1J-[260,inf) </a><br/> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[100,inf)forC1C1WWgrid">SR-SF-0J-[100,inf) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[160,inf)forC1C1WWgrid">SR-SF-0J-[160,inf) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[100,120)forC1C1WWgrid">SR-SF-0J-[100,120) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[120,160)forC1C1WWgrid">SR-SF-0J-[120,160) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[100,105)forC1C1WWgrid">SR-SF-0J-[100,105) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[105,110)forC1C1WWgrid">SR-SF-0J-[105,110) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[110,120)forC1C1WWgrid">SR-SF-0J-[110,120) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[120,140)forC1C1WWgrid">SR-SF-0J-[120,140) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[140,160)forC1C1WWgrid">SR-SF-0J-[140,160) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[160,180)forC1C1WWgrid">SR-SF-0J-[160,180) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[180,220)forC1C1WWgrid">SR-SF-0J-[180,220) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[220,260)forC1C1WWgrid">SR-SF-0J-[220,260) </a> <a href="89413?version=1&table=AcceptanceSR-SF-0J-[260,inf)forC1C1WWgrid">SR-SF-0J-[260,inf) </a><br/> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[100,inf)forC1C1WWgrid">SR-SF-1J-[100,inf) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[160,inf)forC1C1WWgrid">SR-SF-1J-[160,inf) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[100,120)forC1C1WWgrid">SR-SF-1J-[100,120) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[120,160)forC1C1WWgrid">SR-SF-1J-[120,160) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[100,105)forC1C1WWgrid">SR-SF-1J-[100,105) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[105,110)forC1C1WWgrid">SR-SF-1J-[105,110) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[110,120)forC1C1WWgrid">SR-SF-1J-[110,120) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[120,140)forC1C1WWgrid">SR-SF-1J-[120,140) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[140,160)forC1C1WWgrid">SR-SF-1J-[140,160) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[160,180)forC1C1WWgrid">SR-SF-1J-[160,180) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[180,220)forC1C1WWgrid">SR-SF-1J-[180,220) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[220,260)forC1C1WWgrid">SR-SF-1J-[220,260) </a> <a href="89413?version=1&table=AcceptanceSR-SF-1J-[260,inf)forC1C1WWgrid">SR-SF-1J-[260,inf) </a><br/> <li> <b>Efficiency</b> <br/> <a href="89413?version=1&table=EfficiencySR-DF-0J-[100,inf)forC1C1WWgrid">SR-DF-0J-[100,inf) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[160,inf)forC1C1WWgrid">SR-DF-0J-[160,inf) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[100,120)forC1C1WWgrid">SR-DF-0J-[100,120) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[120,160)forC1C1WWgrid">SR-DF-0J-[120,160) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[100,105)forC1C1WWgrid">SR-DF-0J-[100,105) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[105,110)forC1C1WWgrid">SR-DF-0J-[105,110) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[110,120)forC1C1WWgrid">SR-DF-0J-[110,120) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[120,140)forC1C1WWgrid">SR-DF-0J-[120,140) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[140,160)forC1C1WWgrid">SR-DF-0J-[140,160) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[160,180)forC1C1WWgrid">SR-DF-0J-[160,180) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[180,220)forC1C1WWgrid">SR-DF-0J-[180,220) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[220,260)forC1C1WWgrid">SR-DF-0J-[220,260) </a> <a href="89413?version=1&table=EfficiencySR-DF-0J-[260,inf)forC1C1WWgrid">SR-DF-0J-[260,inf) </a><br/> <a href="89413?version=1&table=EfficiencySR-DF-1J-[100,inf)forC1C1WWgrid">SR-DF-1J-[100,inf) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[160,inf)forC1C1WWgrid">SR-DF-1J-[160,inf) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[100,120)forC1C1WWgrid">SR-DF-1J-[100,120) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[120,160)forC1C1WWgrid">SR-DF-1J-[120,160) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[100,105)forC1C1WWgrid">SR-DF-1J-[100,105) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[105,110)forC1C1WWgrid">SR-DF-1J-[105,110) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[110,120)forC1C1WWgrid">SR-DF-1J-[110,120) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[120,140)forC1C1WWgrid">SR-DF-1J-[120,140) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[140,160)forC1C1WWgrid">SR-DF-1J-[140,160) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[160,180)forC1C1WWgrid">SR-DF-1J-[160,180) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[180,220)forC1C1WWgrid">SR-DF-1J-[180,220) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[220,260)forC1C1WWgrid">SR-DF-1J-[220,260) </a> <a href="89413?version=1&table=EfficiencySR-DF-1J-[260,inf)forC1C1WWgrid">SR-DF-1J-[260,inf) </a><br/> <a href="89413?version=1&table=EfficiencySR-SF-0J-[100,inf)forC1C1WWgrid">SR-SF-0J-[100,inf) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[160,inf)forC1C1WWgrid">SR-SF-0J-[160,inf) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[100,120)forC1C1WWgrid">SR-SF-0J-[100,120) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[120,160)forC1C1WWgrid">SR-SF-0J-[120,160) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[100,105)forC1C1WWgrid">SR-SF-0J-[100,105) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[105,110)forC1C1WWgrid">SR-SF-0J-[105,110) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[110,120)forC1C1WWgrid">SR-SF-0J-[110,120) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[120,140)forC1C1WWgrid">SR-SF-0J-[120,140) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[140,160)forC1C1WWgrid">SR-SF-0J-[140,160) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[160,180)forC1C1WWgrid">SR-SF-0J-[160,180) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[180,220)forC1C1WWgrid">SR-SF-0J-[180,220) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[220,260)forC1C1WWgrid">SR-SF-0J-[220,260) </a> <a href="89413?version=1&table=EfficiencySR-SF-0J-[260,inf)forC1C1WWgrid">SR-SF-0J-[260,inf) </a><br/> <a href="89413?version=1&table=EfficiencySR-SF-1J-[100,inf)forC1C1WWgrid">SR-SF-1J-[100,inf) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[160,inf)forC1C1WWgrid">SR-SF-1J-[160,inf) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[100,120)forC1C1WWgrid">SR-SF-1J-[100,120) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[120,160)forC1C1WWgrid">SR-SF-1J-[120,160) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[100,105)forC1C1WWgrid">SR-SF-1J-[100,105) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[105,110)forC1C1WWgrid">SR-SF-1J-[105,110) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[110,120)forC1C1WWgrid">SR-SF-1J-[110,120) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[120,140)forC1C1WWgrid">SR-SF-1J-[120,140) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[140,160)forC1C1WWgrid">SR-SF-1J-[140,160) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[160,180)forC1C1WWgrid">SR-SF-1J-[160,180) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[180,220)forC1C1WWgrid">SR-SF-1J-[180,220) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[220,260)forC1C1WWgrid">SR-SF-1J-[220,260) </a> <a href="89413?version=1&table=EfficiencySR-SF-1J-[260,inf)forC1C1WWgrid">SR-SF-1J-[260,inf) </a><br/> </ul> <b>Cutflow:</b> <ul> <li><a href="89413?version=1&table=Cutflow1">Cutflow for direct chargino-pair production via W decay $m(\tilde{\chi}^{\pm}_1,\tilde{\chi}^{0}_1)=(300,50) GeV$</a> <li><a href="89413?version=1&table=Cutflow1">Cutflow for direct chargino-pair production via slepton decay $m(\tilde{\chi}^{\pm}_1,\tilde{l},\tilde{\chi}^{0}_1)=(600,300,1) GeV$</a> <li><a href="89413?version=1&table=Cutflow1">Cutflow for direct slepton-pair production $m(\tilde{l},\tilde{\chi}^{0}_1)=(400,200) GeV$</a> </ul> <b>SimpleAnalysis framework implementation</b> of the search SRs is available under "Resources" (purple button on the left)
- - - - - - - - Overview of HEPData Record - - - - - - - - <br/><br/> <b>Background Fit results:</b> <ul> <li><a href="89413?version=3&table=Background fit 1">CRs</a> <li><a href="89413?version=3&table=Background fit 2">VRs</a> <li><a href="89413?version=3&table=Background fit 5">inclusive DF-0J SRs</a> <li><a href="89413?version=3&table=Background fit 6">inclusive DF-1J SRs</a> <li><a href="89413?version=3&table=Background fit 3">inclusive SF-0J SRs</a> <li><a href="89413?version=3&table=Background fit 4">inclusive SF-1J SRs</a> </ul> <b>Kinematic distributions in VRs:</b> <ul> <li><a href="89413?version=3&table=VR kinematics 1">$m_{T2}$ in VR-top-low</a> <li><a href="89413?version=3&table=VR kinematics 2">$m_{T2}$ in VR-top-high</a> <li><a href="89413?version=3&table=VR kinematics 3">$E_T^{miss}$ in VR-WW-0J</a> <li><a href="89413?version=3&table=VR kinematics 4">$E_T^{miss}$ in VR-WW-1J</a> <li><a href="89413?version=3&table=VR kinematics 5">$E_T^{miss}$ sig in VR-VZ</a> <li><a href="89413?version=3&table=VR kinematics 6">$E_T^{miss}$ sig in VR-top-WW</a> </ul> <b>Kinematic distributions in SRs:</b> <ul> <li><a href="89413?version=3&table=SR kinematics 1">$m_{T2}$ in SR-SF-0J</a> <li><a href="89413?version=3&table=SR kinematics 2">$m_{T2}$ in SR-SF-1J</a> <li><a href="89413?version=3&table=SR kinematics 3">$m_{T2}$ in SR-DF-0J</a> <li><a href="89413?version=3&table=SR kinematics 4">$m_{T2}$ in SR-DF-1J</a> </ul> <b>Systematic uncertaities:</b> <ul> <li><a href="89413?version=3&table=Systematic uncertainties">dominant systematic uncertainties in the inclusive SRs</a> </ul> <b>Exclusion contours:</b> <ul> <li><a href="89413?version=3&table=Exclusion contour (exp) 1">expected exclusion contour direct chargino-pair production via W decay grid</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 1">observed exclusion contour direct chargino-pair production via W decay grid</a> <li><a href="89413?version=3&table=Exclusion contour (exp) 2">expected exclusion contour direct chargino-pair production via slepton decay grid</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 2">observed exclusion contour direct chargino-pair production via slepton decay grid</a> <li><a href="89413?version=3&table=Exclusion contour (exp) 3">expected exclusion contour direct slepton-pair production grid</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 3">observed exclusion contour direct slepton-pair production grid</a> </ul> <br/><br/><b>AUXILIARY MATERIAL</b><br/> <b>Background Fit in binned SRs:</b> <ul> <li><a href="89413?version=3&table=Background fit 7">binned DF-0J SRs</a> <li><a href="89413?version=3&table=Background fit 8">binned DF-1J SRs</a> <li><a href="89413?version=3&table=Background fit 9">binned SF-0J SRs</a> <li><a href="89413?version=3&table=Background fit 10">binned SF-1J SRs</a> </ul> <b>Exclusion contours:</b> <ul> <li><a href="89413?version=3&table=Exclusion contour (exp) 4">expected exclusion contour left-handed slepton-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 4">observed exclusion contour left-handed slepton-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (exp) 5">expected exclusion contour right-handed slepton-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 5">observed exclusion contour right-handed slepton-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (exp) 6">expected exclusion contour selectron-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 6">observed exclusion contour selectron-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (exp) 7">expected exclusion contour left-handed selectron-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 7">observed exclusion contour left-handed selectron-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (exp) 8">expected exclusion contour right-handed selectron-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 8">observed exclusion contour right-handed selectron-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (exp) 9">expected exclusion contour smuon-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 9">observed exclusion contour smuon-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (exp) 10">expected exclusion contour left-handed smuon-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 10">observed exclusion contour left-handed smuon-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (exp) 11">expected exclusion contour right-handed smuon-pair production</a> <li><a href="89413?version=3&table=Exclusion contour (obs) 11">observed exclusion contour right-handed smuon-pair production</a> </ul> <b>Cross section upper limits:</b> <ul> <li><a href="89413?version=3&table=xsec upper limits 1">upper limits on signal cross section for direct chargino-pair production via W decay</a> <li><a href="89413?version=3&table=xsec upper limits 2">upper limits on signal cross section for direct chargino-pair production via slepton decay</a> <li><a href="89413?version=3&table=xsec upper limits 3">upper limits on signal cross section for direct slepton-pair production</a> </ul> <b>Acceptances and Efficiencies for direct chargino-pair production via W decay grid </b> <ul> <li> <b>Acceptance</b> <br/> <a href="89413?version=3&table=Acceptance SR-DF-0J-[100,inf) for C1C1WW grid">SR-DF-0J-[100,inf) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[160,inf) for C1C1WW grid">SR-DF-0J-[160,inf) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[100,120) for C1C1WW grid">SR-DF-0J-[100,120) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[120,160) for C1C1WW grid">SR-DF-0J-[120,160) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[100,105) for C1C1WW grid">SR-DF-0J-[100,105) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[105,110) for C1C1WW grid">SR-DF-0J-[105,110) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[110,120) for C1C1WW grid">SR-DF-0J-[110,120) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[120,140) for C1C1WW grid">SR-DF-0J-[120,140) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[140,160) for C1C1WW grid">SR-DF-0J-[140,160) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[160,180) for C1C1WW grid">SR-DF-0J-[160,180) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[180,220) for C1C1WW grid">SR-DF-0J-[180,220) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[220,260) for C1C1WW grid">SR-DF-0J-[220,260) </a> <a href="89413?version=3&table=Acceptance SR-DF-0J-[260,inf) for C1C1WW grid">SR-DF-0J-[260,inf) </a><br/> <a href="89413?version=3&table=Acceptance SR-DF-1J-[100,inf) for C1C1WW grid">SR-DF-1J-[100,inf) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[160,inf) for C1C1WW grid">SR-DF-1J-[160,inf) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[100,120) for C1C1WW grid">SR-DF-1J-[100,120) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[120,160) for C1C1WW grid">SR-DF-1J-[120,160) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[100,105) for C1C1WW grid">SR-DF-1J-[100,105) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[105,110) for C1C1WW grid">SR-DF-1J-[105,110) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[110,120) for C1C1WW grid">SR-DF-1J-[110,120) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[120,140) for C1C1WW grid">SR-DF-1J-[120,140) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[140,160) for C1C1WW grid">SR-DF-1J-[140,160) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[160,180) for C1C1WW grid">SR-DF-1J-[160,180) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[180,220) for C1C1WW grid">SR-DF-1J-[180,220) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[220,260) for C1C1WW grid">SR-DF-1J-[220,260) </a> <a href="89413?version=3&table=Acceptance SR-DF-1J-[260,inf) for C1C1WW grid">SR-DF-1J-[260,inf) </a><br/> <a href="89413?version=3&table=Acceptance SR-SF-0J-[100,inf) for C1C1WW grid">SR-SF-0J-[100,inf) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[160,inf) for C1C1WW grid">SR-SF-0J-[160,inf) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[100,120) for C1C1WW grid">SR-SF-0J-[100,120) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[120,160) for C1C1WW grid">SR-SF-0J-[120,160) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[100,105) for C1C1WW grid">SR-SF-0J-[100,105) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[105,110) for C1C1WW grid">SR-SF-0J-[105,110) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[110,120) for C1C1WW grid">SR-SF-0J-[110,120) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[120,140) for C1C1WW grid">SR-SF-0J-[120,140) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[140,160) for C1C1WW grid">SR-SF-0J-[140,160) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[160,180) for C1C1WW grid">SR-SF-0J-[160,180) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[180,220) for C1C1WW grid">SR-SF-0J-[180,220) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[220,260) for C1C1WW grid">SR-SF-0J-[220,260) </a> <a href="89413?version=3&table=Acceptance SR-SF-0J-[260,inf) for C1C1WW grid">SR-SF-0J-[260,inf) </a><br/> <a href="89413?version=3&table=Acceptance SR-SF-1J-[100,inf) for C1C1WW grid">SR-SF-1J-[100,inf) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[160,inf) for C1C1WW grid">SR-SF-1J-[160,inf) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[100,120) for C1C1WW grid">SR-SF-1J-[100,120) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[120,160) for C1C1WW grid">SR-SF-1J-[120,160) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[100,105) for C1C1WW grid">SR-SF-1J-[100,105) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[105,110) for C1C1WW grid">SR-SF-1J-[105,110) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[110,120) for C1C1WW grid">SR-SF-1J-[110,120) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[120,140) for C1C1WW grid">SR-SF-1J-[120,140) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[140,160) for C1C1WW grid">SR-SF-1J-[140,160) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[160,180) for C1C1WW grid">SR-SF-1J-[160,180) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[180,220) for C1C1WW grid">SR-SF-1J-[180,220) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[220,260) for C1C1WW grid">SR-SF-1J-[220,260) </a> <a href="89413?version=3&table=Acceptance SR-SF-1J-[260,inf) for C1C1WW grid">SR-SF-1J-[260,inf) </a><br/> <li> <b>Efficiency</b> <br/> <a href="89413?version=3&table=Efficiency SR-DF-0J-[100,inf) for C1C1WW grid">SR-DF-0J-[100,inf) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[160,inf) for C1C1WW grid">SR-DF-0J-[160,inf) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[100,120) for C1C1WW grid">SR-DF-0J-[100,120) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[120,160) for C1C1WW grid">SR-DF-0J-[120,160) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[100,105) for C1C1WW grid">SR-DF-0J-[100,105) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[105,110) for C1C1WW grid">SR-DF-0J-[105,110) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[110,120) for C1C1WW grid">SR-DF-0J-[110,120) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[120,140) for C1C1WW grid">SR-DF-0J-[120,140) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[140,160) for C1C1WW grid">SR-DF-0J-[140,160) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[160,180) for C1C1WW grid">SR-DF-0J-[160,180) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[180,220) for C1C1WW grid">SR-DF-0J-[180,220) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[220,260) for C1C1WW grid">SR-DF-0J-[220,260) </a> <a href="89413?version=3&table=Efficiency SR-DF-0J-[260,inf) for C1C1WW grid">SR-DF-0J-[260,inf) </a><br/> <a href="89413?version=3&table=Efficiency SR-DF-1J-[100,inf) for C1C1WW grid">SR-DF-1J-[100,inf) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[160,inf) for C1C1WW grid">SR-DF-1J-[160,inf) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[100,120) for C1C1WW grid">SR-DF-1J-[100,120) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[120,160) for C1C1WW grid">SR-DF-1J-[120,160) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[100,105) for C1C1WW grid">SR-DF-1J-[100,105) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[105,110) for C1C1WW grid">SR-DF-1J-[105,110) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[110,120) for C1C1WW grid">SR-DF-1J-[110,120) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[120,140) for C1C1WW grid">SR-DF-1J-[120,140) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[140,160) for C1C1WW grid">SR-DF-1J-[140,160) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[160,180) for C1C1WW grid">SR-DF-1J-[160,180) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[180,220) for C1C1WW grid">SR-DF-1J-[180,220) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[220,260) for C1C1WW grid">SR-DF-1J-[220,260) </a> <a href="89413?version=3&table=Efficiency SR-DF-1J-[260,inf) for C1C1WW grid">SR-DF-1J-[260,inf) </a><br/> <a href="89413?version=3&table=Efficiency SR-SF-0J-[100,inf) for C1C1WW grid">SR-SF-0J-[100,inf) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[160,inf) for C1C1WW grid">SR-SF-0J-[160,inf) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[100,120) for C1C1WW grid">SR-SF-0J-[100,120) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[120,160) for C1C1WW grid">SR-SF-0J-[120,160) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[100,105) for C1C1WW grid">SR-SF-0J-[100,105) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[105,110) for C1C1WW grid">SR-SF-0J-[105,110) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[110,120) for C1C1WW grid">SR-SF-0J-[110,120) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[120,140) for C1C1WW grid">SR-SF-0J-[120,140) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[140,160) for C1C1WW grid">SR-SF-0J-[140,160) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[160,180) for C1C1WW grid">SR-SF-0J-[160,180) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[180,220) for C1C1WW grid">SR-SF-0J-[180,220) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[220,260) for C1C1WW grid">SR-SF-0J-[220,260) </a> <a href="89413?version=3&table=Efficiency SR-SF-0J-[260,inf) for C1C1WW grid">SR-SF-0J-[260,inf) </a><br/> <a href="89413?version=3&table=Efficiency SR-SF-1J-[100,inf) for C1C1WW grid">SR-SF-1J-[100,inf) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[160,inf) for C1C1WW grid">SR-SF-1J-[160,inf) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[100,120) for C1C1WW grid">SR-SF-1J-[100,120) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[120,160) for C1C1WW grid">SR-SF-1J-[120,160) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[100,105) for C1C1WW grid">SR-SF-1J-[100,105) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[105,110) for C1C1WW grid">SR-SF-1J-[105,110) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[110,120) for C1C1WW grid">SR-SF-1J-[110,120) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[120,140) for C1C1WW grid">SR-SF-1J-[120,140) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[140,160) for C1C1WW grid">SR-SF-1J-[140,160) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[160,180) for C1C1WW grid">SR-SF-1J-[160,180) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[180,220) for C1C1WW grid">SR-SF-1J-[180,220) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[220,260) for C1C1WW grid">SR-SF-1J-[220,260) </a> <a href="89413?version=3&table=Efficiency SR-SF-1J-[260,inf) for C1C1WW grid">SR-SF-1J-[260,inf) </a><br/> </ul> <b>Cutflow:</b> <ul> <li><a href="89413?version=3&table=Cutflow 1">Cutflow for direct chargino-pair production via W decay $m(\tilde{\chi}^{\pm}_1,\tilde{\chi}^{0}_1)=(300,50) GeV$</a> <li><a href="89413?version=3&table=Cutflow 2">Cutflow for direct chargino-pair production via slepton decay $m(\tilde{\chi}^{\pm}_1,\tilde{l},\tilde{\chi}^{0}_1)=(600,300,1) GeV$</a> <li><a href="89413?version=3&table=Cutflow 3">Cutflow for direct slepton-pair production $m(\tilde{l},\tilde{\chi}^{0}_1)=(400,200) GeV$</a> </ul> <b>SimpleAnalysis framework implementation</b> of the search SRs is available under "Resources" (purple button on the left)
- - - - - - - - Overview of HEPData Record - - - - - - - - <br/><br/> <b>Background Fit results:</b> <ul> <li><a href="89413?version=4&table=Background fit 1">CRs</a> <li><a href="89413?version=4&table=Background fit 2">VRs</a> <li><a href="89413?version=4&table=Background fit 5">inclusive DF-0J SRs</a> <li><a href="89413?version=4&table=Background fit 6">inclusive DF-1J SRs</a> <li><a href="89413?version=4&table=Background fit 3">inclusive SF-0J SRs</a> <li><a href="89413?version=4&table=Background fit 4">inclusive SF-1J SRs</a> </ul> <b>Kinematic distributions in VRs:</b> <ul> <li><a href="89413?version=4&table=VR kinematics 1">$m_{T2}$ in VR-top-low</a> <li><a href="89413?version=4&table=VR kinematics 2">$m_{T2}$ in VR-top-high</a> <li><a href="89413?version=4&table=VR kinematics 3">$E_T^{miss}$ in VR-WW-0J</a> <li><a href="89413?version=4&table=VR kinematics 4">$E_T^{miss}$ in VR-WW-1J</a> <li><a href="89413?version=4&table=VR kinematics 5">$E_T^{miss}$ sig in VR-VZ</a> <li><a href="89413?version=4&table=VR kinematics 6">$E_T^{miss}$ sig in VR-top-WW</a> </ul> <b>Kinematic distributions in SRs:</b> <ul> <li><a href="89413?version=4&table=SR kinematics 1">$m_{T2}$ in SR-SF-0J</a> <li><a href="89413?version=4&table=SR kinematics 2">$m_{T2}$ in SR-SF-1J</a> <li><a href="89413?version=4&table=SR kinematics 3">$m_{T2}$ in SR-DF-0J</a> <li><a href="89413?version=4&table=SR kinematics 4">$m_{T2}$ in SR-DF-1J</a> </ul> <b>Systematic uncertaities:</b> <ul> <li><a href="89413?version=4&table=Systematic uncertainties">dominant systematic uncertainties in the inclusive SRs</a> </ul> <b>Exclusion contours:</b> <ul> <li><a href="89413?version=4&table=Exclusion contour (exp) 1">expected exclusion contour direct chargino-pair production via W decay grid</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 1">observed exclusion contour direct chargino-pair production via W decay grid</a> <li><a href="89413?version=4&table=Exclusion contour (exp) 2">expected exclusion contour direct chargino-pair production via slepton decay grid</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 2">observed exclusion contour direct chargino-pair production via slepton decay grid</a> <li><a href="89413?version=4&table=Exclusion contour (exp) 3">expected exclusion contour direct slepton-pair production grid</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 3">observed exclusion contour direct slepton-pair production grid</a> </ul> <br/><br/><b>AUXILIARY MATERIAL</b><br/> <b>Background Fit in binned SRs:</b> <ul> <li><a href="89413?version=4&table=Background fit 7">binned DF-0J SRs</a> <li><a href="89413?version=4&table=Background fit 8">binned DF-1J SRs</a> <li><a href="89413?version=4&table=Background fit 9">binned SF-0J SRs</a> <li><a href="89413?version=4&table=Background fit 10">binned SF-1J SRs</a> </ul> <b>Exclusion contours:</b> <ul> <li><a href="89413?version=4&table=Exclusion contour (exp) 4">expected exclusion contour left-handed slepton-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 4">observed exclusion contour left-handed slepton-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (exp) 5">expected exclusion contour right-handed slepton-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 5">observed exclusion contour right-handed slepton-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (exp) 6">expected exclusion contour selectron-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 6">observed exclusion contour selectron-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (exp) 7">expected exclusion contour left-handed selectron-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 7">observed exclusion contour left-handed selectron-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (exp) 8">expected exclusion contour right-handed selectron-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 8">observed exclusion contour right-handed selectron-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (exp) 9">expected exclusion contour smuon-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 9">observed exclusion contour smuon-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (exp) 10">expected exclusion contour left-handed smuon-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 10">observed exclusion contour left-handed smuon-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (exp) 11">expected exclusion contour right-handed smuon-pair production</a> <li><a href="89413?version=4&table=Exclusion contour (obs) 11">observed exclusion contour right-handed smuon-pair production</a> </ul> <b>Cross section upper limits:</b> <ul> <li><a href="89413?version=4&table=xsec upper limits 1">upper limits on signal cross section for direct chargino-pair production via W decay</a> <li><a href="89413?version=4&table=xsec upper limits 2">upper limits on signal cross section for direct chargino-pair production via slepton decay</a> <li><a href="89413?version=4&table=xsec upper limits 3">upper limits on signal cross section for direct slepton-pair production</a> </ul> <b>Acceptances and Efficiencies for direct chargino-pair production via W decay grid </b> <ul> <li> <b>Acceptance</b> <br/> <a href="89413?version=4&table=Acceptance SR-DF-0J-[100,inf) for C1C1WW grid">SR-DF-0J-[100,inf) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[160,inf) for C1C1WW grid">SR-DF-0J-[160,inf) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[100,120) for C1C1WW grid">SR-DF-0J-[100,120) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[120,160) for C1C1WW grid">SR-DF-0J-[120,160) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[100,105) for C1C1WW grid">SR-DF-0J-[100,105) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[105,110) for C1C1WW grid">SR-DF-0J-[105,110) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[110,120) for C1C1WW grid">SR-DF-0J-[110,120) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[120,140) for C1C1WW grid">SR-DF-0J-[120,140) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[140,160) for C1C1WW grid">SR-DF-0J-[140,160) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[160,180) for C1C1WW grid">SR-DF-0J-[160,180) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[180,220) for C1C1WW grid">SR-DF-0J-[180,220) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[220,260) for C1C1WW grid">SR-DF-0J-[220,260) </a> <a href="89413?version=4&table=Acceptance SR-DF-0J-[260,inf) for C1C1WW grid">SR-DF-0J-[260,inf) </a><br/> <a href="89413?version=4&table=Acceptance SR-DF-1J-[100,inf) for C1C1WW grid">SR-DF-1J-[100,inf) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[160,inf) for C1C1WW grid">SR-DF-1J-[160,inf) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[100,120) for C1C1WW grid">SR-DF-1J-[100,120) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[120,160) for C1C1WW grid">SR-DF-1J-[120,160) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[100,105) for C1C1WW grid">SR-DF-1J-[100,105) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[105,110) for C1C1WW grid">SR-DF-1J-[105,110) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[110,120) for C1C1WW grid">SR-DF-1J-[110,120) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[120,140) for C1C1WW grid">SR-DF-1J-[120,140) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[140,160) for C1C1WW grid">SR-DF-1J-[140,160) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[160,180) for C1C1WW grid">SR-DF-1J-[160,180) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[180,220) for C1C1WW grid">SR-DF-1J-[180,220) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[220,260) for C1C1WW grid">SR-DF-1J-[220,260) </a> <a href="89413?version=4&table=Acceptance SR-DF-1J-[260,inf) for C1C1WW grid">SR-DF-1J-[260,inf) </a><br/> <a href="89413?version=4&table=Acceptance SR-SF-0J-[100,inf) for C1C1WW grid">SR-SF-0J-[100,inf) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[160,inf) for C1C1WW grid">SR-SF-0J-[160,inf) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[100,120) for C1C1WW grid">SR-SF-0J-[100,120) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[120,160) for C1C1WW grid">SR-SF-0J-[120,160) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[100,105) for C1C1WW grid">SR-SF-0J-[100,105) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[105,110) for C1C1WW grid">SR-SF-0J-[105,110) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[110,120) for C1C1WW grid">SR-SF-0J-[110,120) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[120,140) for C1C1WW grid">SR-SF-0J-[120,140) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[140,160) for C1C1WW grid">SR-SF-0J-[140,160) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[160,180) for C1C1WW grid">SR-SF-0J-[160,180) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[180,220) for C1C1WW grid">SR-SF-0J-[180,220) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[220,260) for C1C1WW grid">SR-SF-0J-[220,260) </a> <a href="89413?version=4&table=Acceptance SR-SF-0J-[260,inf) for C1C1WW grid">SR-SF-0J-[260,inf) </a><br/> <a href="89413?version=4&table=Acceptance SR-SF-1J-[100,inf) for C1C1WW grid">SR-SF-1J-[100,inf) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[160,inf) for C1C1WW grid">SR-SF-1J-[160,inf) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[100,120) for C1C1WW grid">SR-SF-1J-[100,120) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[120,160) for C1C1WW grid">SR-SF-1J-[120,160) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[100,105) for C1C1WW grid">SR-SF-1J-[100,105) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[105,110) for C1C1WW grid">SR-SF-1J-[105,110) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[110,120) for C1C1WW grid">SR-SF-1J-[110,120) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[120,140) for C1C1WW grid">SR-SF-1J-[120,140) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[140,160) for C1C1WW grid">SR-SF-1J-[140,160) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[160,180) for C1C1WW grid">SR-SF-1J-[160,180) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[180,220) for C1C1WW grid">SR-SF-1J-[180,220) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[220,260) for C1C1WW grid">SR-SF-1J-[220,260) </a> <a href="89413?version=4&table=Acceptance SR-SF-1J-[260,inf) for C1C1WW grid">SR-SF-1J-[260,inf) </a><br/> <li> <b>Efficiency</b> <br/> <a href="89413?version=4&table=Efficiency SR-DF-0J-[100,inf) for C1C1WW grid">SR-DF-0J-[100,inf) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[160,inf) for C1C1WW grid">SR-DF-0J-[160,inf) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[100,120) for C1C1WW grid">SR-DF-0J-[100,120) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[120,160) for C1C1WW grid">SR-DF-0J-[120,160) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[100,105) for C1C1WW grid">SR-DF-0J-[100,105) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[105,110) for C1C1WW grid">SR-DF-0J-[105,110) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[110,120) for C1C1WW grid">SR-DF-0J-[110,120) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[120,140) for C1C1WW grid">SR-DF-0J-[120,140) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[140,160) for C1C1WW grid">SR-DF-0J-[140,160) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[160,180) for C1C1WW grid">SR-DF-0J-[160,180) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[180,220) for C1C1WW grid">SR-DF-0J-[180,220) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[220,260) for C1C1WW grid">SR-DF-0J-[220,260) </a> <a href="89413?version=4&table=Efficiency SR-DF-0J-[260,inf) for C1C1WW grid">SR-DF-0J-[260,inf) </a><br/> <a href="89413?version=4&table=Efficiency SR-DF-1J-[100,inf) for C1C1WW grid">SR-DF-1J-[100,inf) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[160,inf) for C1C1WW grid">SR-DF-1J-[160,inf) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[100,120) for C1C1WW grid">SR-DF-1J-[100,120) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[120,160) for C1C1WW grid">SR-DF-1J-[120,160) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[100,105) for C1C1WW grid">SR-DF-1J-[100,105) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[105,110) for C1C1WW grid">SR-DF-1J-[105,110) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[110,120) for C1C1WW grid">SR-DF-1J-[110,120) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[120,140) for C1C1WW grid">SR-DF-1J-[120,140) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[140,160) for C1C1WW grid">SR-DF-1J-[140,160) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[160,180) for C1C1WW grid">SR-DF-1J-[160,180) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[180,220) for C1C1WW grid">SR-DF-1J-[180,220) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[220,260) for C1C1WW grid">SR-DF-1J-[220,260) </a> <a href="89413?version=4&table=Efficiency SR-DF-1J-[260,inf) for C1C1WW grid">SR-DF-1J-[260,inf) </a><br/> <a href="89413?version=4&table=Efficiency SR-SF-0J-[100,inf) for C1C1WW grid">SR-SF-0J-[100,inf) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[160,inf) for C1C1WW grid">SR-SF-0J-[160,inf) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[100,120) for C1C1WW grid">SR-SF-0J-[100,120) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[120,160) for C1C1WW grid">SR-SF-0J-[120,160) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[100,105) for C1C1WW grid">SR-SF-0J-[100,105) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[105,110) for C1C1WW grid">SR-SF-0J-[105,110) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[110,120) for C1C1WW grid">SR-SF-0J-[110,120) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[120,140) for C1C1WW grid">SR-SF-0J-[120,140) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[140,160) for C1C1WW grid">SR-SF-0J-[140,160) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[160,180) for C1C1WW grid">SR-SF-0J-[160,180) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[180,220) for C1C1WW grid">SR-SF-0J-[180,220) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[220,260) for C1C1WW grid">SR-SF-0J-[220,260) </a> <a href="89413?version=4&table=Efficiency SR-SF-0J-[260,inf) for C1C1WW grid">SR-SF-0J-[260,inf) </a><br/> <a href="89413?version=4&table=Efficiency SR-SF-1J-[100,inf) for C1C1WW grid">SR-SF-1J-[100,inf) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[160,inf) for C1C1WW grid">SR-SF-1J-[160,inf) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[100,120) for C1C1WW grid">SR-SF-1J-[100,120) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[120,160) for C1C1WW grid">SR-SF-1J-[120,160) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[100,105) for C1C1WW grid">SR-SF-1J-[100,105) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[105,110) for C1C1WW grid">SR-SF-1J-[105,110) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[110,120) for C1C1WW grid">SR-SF-1J-[110,120) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[120,140) for C1C1WW grid">SR-SF-1J-[120,140) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[140,160) for C1C1WW grid">SR-SF-1J-[140,160) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[160,180) for C1C1WW grid">SR-SF-1J-[160,180) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[180,220) for C1C1WW grid">SR-SF-1J-[180,220) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[220,260) for C1C1WW grid">SR-SF-1J-[220,260) </a> <a href="89413?version=4&table=Efficiency SR-SF-1J-[260,inf) for C1C1WW grid">SR-SF-1J-[260,inf) </a><br/> </ul> <b>Cutflow:</b> <ul> <li><a href="89413?version=4&table=Cutflow 1">Cutflow for direct chargino-pair production via W decay $m(\tilde{\chi}^{\pm}_1,\tilde{\chi}^{0}_1)=(300,50) GeV$</a> <li><a href="89413?version=4&table=Cutflow 2">Cutflow for direct chargino-pair production via slepton decay $m(\tilde{\chi}^{\pm}_1,\tilde{l},\tilde{\chi}^{0}_1)=(600,300,1) GeV$</a> <li><a href="89413?version=4&table=Cutflow 3">Cutflow for direct slepton-pair production $m(\tilde{l},\tilde{\chi}^{0}_1)=(400,200) GeV$</a> </ul> <b>SimpleAnalysis framework implementation</b> of the search SRs is available under "Resources" (purple button on the left)
Observed events and predicted background yields from the fit for the CRs. For backgrounds whose normalisation is extracted from the fit, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit for the CRs. For backgrounds whose normalisation is extracted from the fit, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit for the CRs. For backgrounds whose normalisation is extracted from the fit, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit for the CRs. For backgrounds whose normalisation is extracted from the fit, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields in the VRs. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields in the VRs. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields in the VRs. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields in the VRs. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Distributions of $m_{T2}$ in VR-top-low for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $m_{T2}$ in VR-top-low for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $m_{T2}$ in VR-top-low for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $m_{T2}$ in VR-top-low for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $m_{T2}$ in VR-top-high for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $m_{T2}$ in VR-top-high for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $m_{T2}$ in VR-top-high for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $m_{T2}$ in VR-top-high for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ in VR-WW-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ in VR-WW-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ in VR-WW-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ in VR-WW-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ in VR-WW-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ in VR-WW-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ in VR-WW-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ in VR-WW-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ significance in VR-VZ for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ significance in VR-VZ for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ significance in VR-VZ for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ significance in VR-VZ for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ significance in VR-top-WW for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ significance in VR-top-WW for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ significance in VR-top-WW for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Distributions of $E_T^{miss}$ significance in VR-top-WW for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.
Breakdown of the dominant systematic uncertainties on background estimates in the inclusive SRs requiring $m_{T2}$>100 GeV after performing the profile likelihood fit. Note that the individual uncertainties can be correlated, and do not necessarily add up quadratically to the total background uncertainty. The percentages show the size of the uncertainty relative to the total expected background. "Top theoretical uncertainties" refers to $t\bar t$ theoretical uncertainties and the uncertainty associated to $Wt-t\bar t$ interference added quadratically.
Breakdown of the dominant systematic uncertainties on background estimates in the inclusive SRs requiring $m_{T2}$>100 GeV after performing the profile likelihood fit. Note that the individual uncertainties can be correlated, and do not necessarily add up quadratically to the total background uncertainty. The percentages show the size of the uncertainty relative to the total expected background. "Top theoretical uncertainties" refers to $t\bar t$ theoretical uncertainties and the uncertainty associated to $Wt-t\bar t$ interference added quadratically.
Breakdown of the dominant systematic uncertainties on background estimates in the inclusive SRs requiring $m_{T2}$>100 GeV after performing the profile likelihood fit. Note that the individual uncertainties can be correlated, and do not necessarily add up quadratically to the total background uncertainty. The percentages show the size of the uncertainty relative to the total expected background. "Top theoretical uncertainties" refers to $t\bar t$ theoretical uncertainties and the uncertainty associated to $Wt-t\bar t$ interference added quadratically.
Breakdown of the dominant systematic uncertainties on background estimates in the inclusive SRs requiring $m_{T2}$>100 GeV after performing the profile likelihood fit. Note that the individual uncertainties can be correlated, and do not necessarily add up quadratically to the total background uncertainty. The percentages show the size of the uncertainty relative to the total expected background. "Top theoretical uncertainties" refers to $t\bar t$ theoretical uncertainties and the uncertainty associated to $Wt-t\bar t$ interference added quadratically.
Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Distributions of $m_{T2}$ in SRSF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRSF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRSF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRSF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRSF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRSF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRSF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRSF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRDF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRDF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRDF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRDF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRDF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRDF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRDF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Distributions of $m_{T2}$ in SRDF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.
Observed exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.
Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.
Observed exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.
Observed exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.
Expected exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.
Upper limits on signal cross-section (fb) for chargino-pair production with W -boson-mediated decays.
Upper limits on signal cross-section (fb) for chargino-pair production with W -boson-mediated decays.
Upper limits on signal cross-section (fb) for chargino-pair production with W -boson-mediated decays.
Upper limits on signal cross-section (fb) for chargino-pair production with W -boson-mediated decays.
Upper limits on signal cross-section (fb) for chargino-pair production with slepton/sneutrino-mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed.
Upper limits on signal cross-section (fb) for chargino-pair production with slepton/sneutrino-mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed.
Upper limits on signal cross-section (fb) for chargino-pair production with slepton/sneutrino-mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed.
Upper limits on signal cross-section (fb) for chargino-pair production with slepton/sneutrino-mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed.
Upper limits on signal cross-section (fb) for slepton-pair production.
Upper limits on signal cross-section (fb) for slepton-pair production.
Upper limits on signal cross-section (fb) for slepton-pair production.
Upper limits on signal cross-section (fb) for slepton-pair production.
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).
Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).
Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).
Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via $W^{\pm}W^{\mp}$. The masses of the two charginos are 300 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 50 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via $W^{\pm}W^{\mp}$. The masses of the two charginos are 300 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 50 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via $W^{\pm}W^{\mp}$. The masses of the two charginos are 300 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 50 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via $W^{\pm}W^{\mp}$. The masses of the two charginos are 300 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 50 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via slepton-neutrino/sneutrino-lepton pair. The masses of the two charginos are 600 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 1 GeV. The slepton/sneutrino masses are 300 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via slepton-neutrino/sneutrino-lepton pair. The masses of the two charginos are 600 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 1 GeV. The slepton/sneutrino masses are 300 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via slepton-neutrino/sneutrino-lepton pair. The masses of the two charginos are 600 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 1 GeV. The slepton/sneutrino masses are 300 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via slepton-neutrino/sneutrino-lepton pair. The masses of the two charginos are 600 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 1 GeV. The slepton/sneutrino masses are 300 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde\ell\tilde\ell$ are produced. Only $\tilde{e}$ and $\tilde{\mu}$ are considered in this model. The masses of the two sleptons are 400 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 200 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde\ell\tilde\ell$ are produced. Only $\tilde{e}$ and $\tilde{\mu}$ are considered in this model. The masses of the two sleptons are 400 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 200 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde\ell\tilde\ell$ are produced. Only $\tilde{e}$ and $\tilde{\mu}$ are considered in this model. The masses of the two sleptons are 400 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 200 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
Cutflow for supersymmetric model where $\tilde\ell\tilde\ell$ are produced. Only $\tilde{e}$ and $\tilde{\mu}$ are considered in this model. The masses of the two sleptons are 400 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 200 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.
A search for long-lived particles decaying into an oppositely charged lepton pair, $\mu\mu$, $ee$, or $e\mu$, is presented using 32.8 fb$^{-1}$ of $pp$ collision data collected at $\sqrt{s}=13$ TeV by the ATLAS detector at the LHC. Candidate leptons are required to form a vertex, within the inner tracking volume of ATLAS, displaced from the primary $pp$ interaction region. No lepton pairs with an invariant mass greater than 12 GeV are observed, consistent with the background expectations derived from data. The detection efficiencies for generic resonances with lifetimes ($c\tau$) of 100-1000 mm decaying into a dilepton pair with masses between 0.1-1.0 TeV are presented as a function of $p_T$ and decay radius of the resonances to allow the extraction of upper limits on the cross sections for theoretical models. The result is also interpreted in a supersymmetric model in which the lightest neutralino, produced via squark-antisquark production, decays into $\ell^{+}\ell^{'-}\nu$ ($\ell, \ell^{'} = e$, $\mu$) with a finite lifetime due to the presence of R-parity violating couplings. Cross-section limits are presented for specific squark and neutralino masses. For a 700 GeV squark, neutralinos with masses of 50-500 GeV and mean proper lifetimes corresponding to $c\tau$ values between 1 mm to 6 m are excluded. For a 1.6 TeV squark, $c\tau$ values between 3 mm to 1 m are excluded for 1.3 TeV neutralinos.
<h1>Overview of reinterpretation material</h1><p><b>Important note:</b> A detailed explanation of the reinterpretation material can be found <a href="https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2017-04/hepdata_info.pdf">here</a>.<br/>Please read this stand-alone document before reinterpreting the search.</p><h2>Parameterized detection efficiencies</h2><p>RPV SUSY model: Tables <a href="90606?version=1&table=Table27">27</a> to <a href="90606?version=1&table=Table44">44</a><br/>Z' toy model: Tables <a href="90606?version=1&table=Table45">45</a> to <a href="90606?version=1&table=Table59">59</a></p><h2>Further material for the RPV SUSY model</h2><p>Acceptances: Tables <a href="90606?version=1&table=Table18">18</a> (ee), <a href="90606?version=1&table=Table19">19</a> (emu) and <a href="90606?version=1&table=Table20">20</a> (mumu)<br/>Detection efficiencies: Tables <a href="90606?version=1&table=Table21">21</a> (ee), <a href="90606?version=1&table=Table22">22</a> (emu) and <a href="90606?version=1&table=Table23">23</a> (mumu)<br/>Overall signal efficiencies: Tables <a href="90606?version=1&table=Table24">24</a> (ee), <a href="90606?version=1&table=Table25">25</a> (emu) and <a href="90606?version=1&table=Table26">26</a> (mumu)</p><h2>Further material for the Z' toy model</h2><p>Acceptances, detection efficiencies and overall signal efficiencies: Tables <a href="90606?version=1&table=Table60">60</a> (mZ' = 100 GeV) to <a href="90606?version=1&table=Table64">64</a> (mZ' = 1000 GeV)</p>
dRcos distribution of dimuon pairs (scaled) and dimuon vertices in the cosmic rays control region. The distribution of all dimuon pairs is scaled to the DV distribution.
Dependence of the overall signal efficiency on the transverse decay radius Rxy of the long-lived Z' for Z' -> ee. The error bars indicate the total uncertainties.
Dependence of the overall signal efficiency on the pT of the long-lived Z' for Z' -> ee. The error bars indicate the total uncertainties.
Dependence of the overall signal efficiency on the transverse decay radius Rxy of the long-lived Z' for Z' -> emu. The error bars indicate the total uncertainties.
Dependence of the overall signal efficiency on the pT of the long-lived Z' for Z' -> emu. The error bars indicate the total uncertainties.
Dependence of the overall signal efficiency on the transverse decay radius Rxy of the long-lived Z' for Z' -> mumu. The error bars indicate the total uncertainties.
Dependence of the overall signal efficiency on the pT of the long-lived Z' for Z' -> mumu. The error bars indicate the total uncertainties.
Overall signal efficiency as a function of the mean proper lifetime (ctau) of the neutralino for the lambda121 scenario of the RPV SUSY model. The error bars indicate the total uncertainties.
Overall signal efficiency as a function of the mean proper lifetime (ctau) of the neutralino for the lambda122 scenario of the RPV SUSY model. The error bars indicate the total uncertainties.
95% CL upper limits on the squark-antisquark production cross-section as a function of the mean proper lifetime (ctau) of the neutralino for the lambda121 scenario of the RPV SUSY model and a 700 GeV squark. The uncertainties of the expected limit indicate the +-1sigma variations.
95% CL upper limits on the squark-antisquark production cross-section as a function of the mean proper lifetime (ctau) of the neutralino for the lambda122 scenario of the RPV SUSY model and a 700 GeV squark. The uncertainties of the expected limit indicate the +-1sigma variations.
95% CL upper limits on the squark-antisquark production cross-section as a function of the mean proper lifetime (ctau) of the neutralino for the lambda121 scenario of the RPV SUSY model and a 1600 GeV squark. The uncertainties of the expected limit indicate the +-1sigma variations.
95% CL upper limits on the squark-antisquark production cross-section as a function of the mean proper lifetime (ctau) of the neutralino for the lambda122 scenario of the RPV SUSY model and a 1600 GeV squark. The uncertainties of the expected limit indicate the +-1sigma variations.
Fraction of detector volume covered by the material veto as a function of z and Rxy of the displaced dilepton vertex.
Fraction of detector volume covered by the disabled pixel modules veto veto as a function of z and Rxy of the displaced dilepton vertex.
Observed Rxy distribution of vertices composed of two non-leptonic tracks in a control sample in the data and the predicted distribution obtained from the event mixing. The error bars indicate the statistical uncertainties.
Rxy distributions of Kshort vertices from the large radius tracking in the data and background MC samples. Data has been normalised such that the total number of Kshort from the standard tracking in the data agrees with the total number of Kshort from the standard tracking in the MC. The error bars indicate the statistical uncertainties.
Acceptance per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> eenu. The error bars indicate the statistical uncertainties.
Acceptance per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> emunu. The error bars indicate the statistical uncertainties.
Acceptance per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> mumunu. The error bars indicate the statistical uncertainties.
Detection efficiency per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> eenu. The error bars indicate the total uncertainties.
Detection efficiency per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> emunu. The error bars indicate the total uncertainties.
Detection efficiency per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> mumunu. The error bars indicate the total uncertainties.
Overall signal efficiency (acceptance times efficiency) per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> eenu. The error bars indicate the total uncertainties.
Overall signal efficiency (acceptance times efficiency) per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> emunu. The error bars indicate the total uncertainties.
Overall signal efficiency (acceptance times efficiency) per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> mumunu. The error bars indicate the total uncertainties.
Detection efficiency per decay for Rxy < 22 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.
Detection efficiency per decay for 22 <= Rxy < 38 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.
Detection efficiency per decay for 38 <= Rxy < 73 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.
Detection efficiency per decay for 73 <= Rxy < 111 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.
Detection efficiency per decay for 111 <= Rxy < 145 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.
Detection efficiency per decay for 145 <= Rxy < 300 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.
Detection efficiency per decay for Rxy < 22 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.
Detection efficiency per decay for 22 <= Rxy < 38 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.
Detection efficiency per decay for 38 <= Rxy < 73 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.
Detection efficiency per decay for 73 <= Rxy < 111 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.
Detection efficiency per decay for 111 <= Rxy < 145 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.
Detection efficiency per decay for 145 <= Rxy < 300 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.
Detection efficiency per decay for Rxy < 22 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.
Detection efficiency per decay for 22 <= Rxy < 38 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.
Detection efficiency per decay for 38 <= Rxy < 73 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.
Detection efficiency per decay for 73 <= Rxy < 111 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.
Detection efficiency per decay for 111 <= Rxy < 145 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.
Detection efficiency per decay for 145 <= Rxy < 300 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 100 GeV and LLP -> ee.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 100 GeV and LLP -> emu.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 100 GeV and LLP -> mumu.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 250 GeV and LLP -> ee.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 250 GeV and LLP -> emu.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 250 GeV and LLP -> mumu.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 500 GeV and LLP -> ee.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 500 GeV and LLP -> emu.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 500 GeV and LLP -> mumu.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 750 GeV and LLP -> ee.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 750 GeV and LLP -> emu.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 750 GeV and LLP -> mumu.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 1000 GeV and LLP -> ee.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 1000 GeV and LLP -> emu.
Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 1000 GeV and LLP -> mumu.
Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 100 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.
Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 250 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.
Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 500 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.
Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 750 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.
Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 1000 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.
A search for heavy charged long-lived particles is performed using a data sample of 36.1 fb$^{-1}$ of proton-proton collisions at $\sqrt{s} = 13$ TeV collected by the ATLAS experiment at the Large Hadron Collider. The search is based on observables related to ionization energy loss and time of flight, which are sensitive to the velocity of heavy charged particles traveling significantly slower than the speed of light. Multiple search strategies for a wide range of lifetimes, corresponding to path lengths of a few meters, are defined as model-independently as possible, by referencing several representative physics cases that yield long-lived particles within supersymmetric models, such as gluinos/squarks ($R$-hadrons), charginos and staus. No significant deviations from the expected Standard Model background are observed. Upper limits at 95% confidence level are provided on the production cross sections of long-lived $R$-hadrons as well as directly pair-produced staus and charginos. These results translate into lower limits on the masses of long-lived gluino, sbottom and stop $R$-hadrons, as well as staus and charginos of 2000 GeV, 1250 GeV, 1340 GeV, 430 GeV and 1090 GeV, respectively.
- - - - - - - - Overview of HEPData Record - - - - - - - - <br/><br/> <b>Lower mass requirement for signal regions.</b> <ul> <li><a href="86565?version=1&table=Table1">Gluinos and squarks</a></li> <li><a href="86565?version=1&table=Table2">Staus and charginos</a></li> </ul> <b>Discovery regions:</b> <ul> <li><a href="86565?version=1&table=Table3">Yields</a></li> <li><a href="86565?version=1&table=Table6">p0-values and limits</a></li> </ul> <b>Signal yield tables:</b> <ul> <li><a href="86565?version=1&table=Table4">MS-agnostic R-hadron search</a></li> <li><a href="86565?version=1&table=Table5">Full-detector R-hadron search</a></li> <li><a href="86565?version=1&table=Table7">MS-agnostic search for metastable gluino R-hadrons</a></li> <li><a href="86565?version=1&table=Table8">Full-detector direct-stau search</a></li> <li><a href="86565?version=1&table=Table9">Full-detector chargino search</a></li> </ul> <b>Limits:</b> <ul> <li><a href="86565?version=1&table=Table10">Gluino R-hadron search</a></li> <li><a href="86565?version=1&table=Table11">Sbottom R-hadron search</a></li> <li><a href="86565?version=1&table=Table12">Stop R-hadron search</a></li> <li><a href="86565?version=1&table=Table13">Stau search</a></li> <li><a href="86565?version=1&table=Table14">Chargino search</a></li> <li><a href="86565?version=1&table=Table15">Meta-stable gluino R-hadron search</a></li> <li><a href="86565?version=1&table=Table17">Meta-stable gluino R-hadron search</a></li> </ul> <b>Acceptance and efficiency:</b> <ul> <li><a href="86565?version=1&table=Table16">MS-agnostic R-hadron search</a></li> </ul> <b>Truth quantities:</b> <ul> <li><a href="86565?version=1&table=Table18">Flavor composition of 800 GeV stop R-hadrons simulated using the generic model</a></li> <li><a href="86565?version=1&table=Table19">Flavor composition of 800 GeV anti-stop R-hadrons simulated using the generic model</a></li> <li><a href="86565?version=1&table=Table20">Flavor composition of 800 GeV stop R-hadrons simulated using the Regge model</a></li> <li><a href="86565?version=1&table=Table21">Flavor composition of 800 GeV anti-stop R-hadrons simulated using the Regge model</a></li> </ul> <b>Reinterpretation material:</b> <ul> <li><a href="86565?version=1&table=Table22">ETmiss trigger efficiency as function of true ETmiss</a></li> <li><a href="86565?version=1&table=Table23">Single-muon trigger efficiency as function of |eta| and beta</a></li> <li><a href="86565?version=1&table=Table24">Candidate reconstruction efficiency for ID+Calo selection</a></li> <li><a href="86565?version=1&table=Table25">Candidate reconstruction efficiency for loose selection</a></li> <li><a href="86565?version=1&table=Table26">Efficiency for a loose candidate to be promoted to a tight candidate</a></li> <li><a href="86565?version=1&table=Table27">Resolution and average of reconstructed dE/dx mass for a given simulated mass for ID+calo candidates</a></li> <li><a href="86565?version=1&table=Table28">Resolution and average of reconstructed ToF mass for a given simulated mass for ID+calo candidates</a></li> <li><a href="86565?version=1&table=Table29">Resolution and average of reconstructed ToF mass for a given simulated mass for FullDet candidates</a></li> </ul> <p><b>Pseudo-code snippets</b> and <b>example SLHA setups</b> are available in the "Resources" linked on the left, and more detailed reinterpretation material is available at <a href="http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2016-32/hepdata_info.pdf">http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2016-32/hepdata_info.pdf</a>.</p>
- - - - - - - - Overview of HEPData Record - - - - - - - - <br/><br/> <b>Lower mass requirement for signal regions.</b> <ul> <li><a href="86565?version=1&table=Table1">Gluinos and squarks</a></li> <li><a href="86565?version=1&table=Table2">Staus and charginos</a></li> </ul> <b>Discovery regions:</b> <ul> <li><a href="86565?version=1&table=Table3">Yields</a></li> <li><a href="86565?version=1&table=Table6">p0-values and limits</a></li> </ul> <b>Signal yield tables:</b> <ul> <li><a href="86565?version=1&table=Table4">MS-agnostic R-hadron search</a></li> <li><a href="86565?version=1&table=Table5">Full-detector R-hadron search</a></li> <li><a href="86565?version=1&table=Table7">MS-agnostic search for metastable gluino R-hadrons</a></li> <li><a href="86565?version=1&table=Table8">Full-detector direct-stau search</a></li> <li><a href="86565?version=1&table=Table9">Full-detector chargino search</a></li> </ul> <b>Limits:</b> <ul> <li><a href="86565?version=1&table=Table10">Gluino R-hadron search</a></li> <li><a href="86565?version=1&table=Table11">Sbottom R-hadron search</a></li> <li><a href="86565?version=1&table=Table12">Stop R-hadron search</a></li> <li><a href="86565?version=1&table=Table13">Stau search</a></li> <li><a href="86565?version=1&table=Table14">Chargino search</a></li> <li><a href="86565?version=1&table=Table15">Meta-stable gluino R-hadron search</a></li> <li><a href="86565?version=1&table=Table17">Meta-stable gluino R-hadron search</a></li> </ul> <b>Acceptance and efficiency:</b> <ul> <li><a href="86565?version=1&table=Table16">MS-agnostic R-hadron search</a></li> </ul> <b>Truth quantities:</b> <ul> <li><a href="86565?version=1&table=Table18">Flavor composition of 800 GeV stop R-hadrons simulated using the generic model</a></li> <li><a href="86565?version=1&table=Table19">Flavor composition of 800 GeV anti-stop R-hadrons simulated using the generic model</a></li> <li><a href="86565?version=1&table=Table20">Flavor composition of 800 GeV stop R-hadrons simulated using the Regge model</a></li> <li><a href="86565?version=1&table=Table21">Flavor composition of 800 GeV anti-stop R-hadrons simulated using the Regge model</a></li> </ul> <b>Reinterpretation material:</b> <ul> <li><a href="86565?version=1&table=Table22">ETmiss trigger efficiency as function of true ETmiss</a></li> <li><a href="86565?version=1&table=Table23">Single-muon trigger efficiency as function of |eta| and beta</a></li> <li><a href="86565?version=1&table=Table24">Candidate reconstruction efficiency for ID+Calo selection</a></li> <li><a href="86565?version=1&table=Table25">Candidate reconstruction efficiency for loose selection</a></li> <li><a href="86565?version=1&table=Table26">Efficiency for a loose candidate to be promoted to a tight candidate</a></li> <li><a href="86565?version=1&table=Table27">Resolution and average of reconstructed dE/dx mass for a given simulated mass for ID+calo candidates</a></li> <li><a href="86565?version=1&table=Table28">Resolution and average of reconstructed ToF mass for a given simulated mass for ID+calo candidates</a></li> <li><a href="86565?version=1&table=Table29">Resolution and average of reconstructed ToF mass for a given simulated mass for FullDet candidates</a></li> </ul> <p><b>Pseudo-code snippets</b> and <b>example SLHA setups</b> are available in the "Resources" linked on the left, and more detailed reinterpretation material is available at <a href="http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2016-32/hepdata_info.pdf">http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2016-32/hepdata_info.pdf</a>.</p>
Lower mass requirement for signal regions.
Lower mass requirement for signal regions.
Lower mass requirement for signal regions.
Lower mass requirement for signal regions.
Expected and observed events in the 16 discovery regions along with the according control regions.
Expected and observed events in the 16 discovery regions along with the according control regions.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the MS-agnostic R-hadron search.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the MS-agnostic R-hadron search.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the full-detector R-hadron search.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the full-detector R-hadron search.
p0-values and model-independent upper limits on cross-section x acceptance x efficiency for the 16 discovery regions.
p0-values and model-independent upper limits on cross-section x acceptance x efficiency for the 16 discovery regions.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the MS-agnostic search for metastable gluino R-hadrons.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the MS-agnostic search for metastable gluino R-hadrons.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the full-detector direct-stau search.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the full-detector direct-stau search.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the full-detector chargino search.
Expected signal yield and acceptance x efficiency, estimated background and observed number of events in data for the full range of simulated masses in the full-detector chargino search.
Upper cross-section limit in gluino R-hadron search.
Upper cross-section limit in gluino R-hadron search.
Upper cross-section limit in sbottom R-hadron search.
Upper cross-section limit in sbottom R-hadron search.
Upper cross-section limit in stop R-hadron search.
Upper cross-section limit in stop R-hadron search.
Upper cross-section limit in stau search.
Upper cross-section limit in stau search.
Upper cross-section limit in chargino search.
Upper cross-section limit in chargino search.
Lower mass limit as function of gluino lifetime.
Lower mass limit as function of gluino lifetime.
Acceptance x efficiency, acceptance and efficiency for the full range of simulated masses in the MS-agnostic R-hadron search.
Acceptance x efficiency, acceptance and efficiency for the full range of simulated masses in the MS-agnostic R-hadron search.
Upper cross-section limit in meta-stable gluino R-hadron search.
Upper cross-section limit in meta-stable gluino R-hadron search.
Flavor composition of 800 GeV stop R-hadrons simulated using the generic model as a function of radial distance from the interaction point.
Flavor composition of 800 GeV stop R-hadrons simulated using the generic model as a function of radial distance from the interaction point.
Flavor composition of 800 GeV anti-stop R-hadrons simulated using the generic model as a function of radial distance from the interaction point.
Flavor composition of 800 GeV anti-stop R-hadrons simulated using the generic model as a function of radial distance from the interaction point.
Flavor composition of 800 GeV stop R-hadrons simulated using the Regge model as a function of radial distance from the interaction point.
Flavor composition of 800 GeV stop R-hadrons simulated using the Regge model as a function of radial distance from the interaction point.
Flavor composition of 800 GeV anti-stop R-hadrons simulated using the Regge model as a function of radial distance from the interaction point.
Flavor composition of 800 GeV anti-stop R-hadrons simulated using the Regge model as a function of radial distance from the interaction point.
ETmiss trigger efficiency as function of true ETmiss (EtmissTurnOn).
ETmiss trigger efficiency as function of true ETmiss (EtmissTurnOn).
Single-muon trigger efficiency as function of $|\eta|$ and $\beta$ (SingleMuTurnOn).
Single-muon trigger efficiency as function of $|\eta|$ and $\beta$ (SingleMuTurnOn).
Candidate reconstruction efficiency for ID+Calo selection (IDCaloEff).
Candidate reconstruction efficiency for ID+Calo selection (IDCaloEff).
Candidate reconstruction efficiency for loose selection (LooseEff).
Candidate reconstruction efficiency for loose selection (LooseEff).
Efficiency for a loose candidate to be promoted to a tight candidate (TightPromotionEff).
Efficiency for a loose candidate to be promoted to a tight candidate (TightPromotionEff).
Resolution and average of reconstructed dE/dx mass for a given simulated mass for ID+calo candidates.
Resolution and average of reconstructed dE/dx mass for a given simulated mass for ID+calo candidates.
Resolution and average of reconstructed ToF mass for a given simulated mass for ID+calo candidates.
Resolution and average of reconstructed ToF mass for a given simulated mass for ID+calo candidates.
Resolution and average of reconstructed ToF mass for a given simulated mass for FullDet candidates.
Resolution and average of reconstructed ToF mass for a given simulated mass for FullDet candidates.
This paper presents a search for direct electroweak gaugino or gluino pair production with a chargino nearly mass-degenerate with a stable neutralino. It is based on an integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ of $pp$ collisions at $\sqrt{s} = 13$ TeV collected by the ATLAS experiment at the LHC. The final state of interest is a disappearing track accompanied by at least one jet with high transverse momentum from initial-state radiation or by four jets from the gluino decay chain. The use of short track segments reconstructed from the innermost tracking layers significantly improves the sensitivity to short chargino lifetimes. The results are found to be consistent with Standard Model predictions. Exclusion limits are set at 95% confidence level on the mass of charginos and gluinos for different chargino lifetimes. For a pure wino with a lifetime of about 0.2 ns, chargino masses up to 460 GeV are excluded. For the strong production channel, gluino masses up to 1.65 TeV are excluded assuming a chargino mass of 460 GeV and lifetime of 0.2 ns.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (fb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
The generator-level acceptance after reconstruction, for selecting and reconstructing charginos as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The generator-level acceptance after reconstruction, for selecting and reconstructing charginos as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anticorrelation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracket background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
A search for heavy neutral Higgs bosons and $Z^{\prime}$ bosons is performed using a data sample corresponding to an integrated luminosity of 36.1 fb$^{-1}$ from proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded by the ATLAS detector at the LHC during 2015 and 2016. The heavy resonance is assumed to decay to $\tau^+\tau^-$ with at least one tau lepton decaying to final states with hadrons and a neutrino. The search is performed in the mass range of 0.2-2.25 TeV for Higgs bosons and 0.2-4.0 TeV for $Z^{\prime}$ bosons. The data are in good agreement with the background predicted by the Standard Model. The results are interpreted in benchmark scenarios. In the context of the hMSSM scenario, the data exclude $\tan\beta > 1.0$ for $m_A$ = 0.25 TeV and $\tan\beta > 42$ for $m_A$ = 1.5 TeV at the 95% confidence level. For the Sequential Standard Model, $Z^{\prime}_\mathrm{SSM}$ with $m_{Z^{\prime}} < 2.42$ TeV is excluded at 95% confidence level, while $Z^{\prime}_\mathrm{NU}$ with $m_{Z^{\prime}} < 2.25$ TeV is excluded for the non-universal $G(221)$ model that exhibits enhanced couplings to third-generation fermions.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Despite listing this as an exclusive final state (as there must be no b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. In the paper, the first bin is cut off at 60 GeV for aesthetics but contains underflows down to 50 GeV as in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Despite listing this as an exclusive final state (as there must be at least one b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. In the paper, the first bin is cut off at 60 GeV for aesthetics but contains underflows down to 50 GeV as in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Despite listing this as an exclusive final state (as there must be no b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Despite listing this as an exclusive final state (as there must be at least one b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution for the b-inclusive selection in the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. In the paper, the first bin is cut off at 60 GeV for aesthetics but contains underflows down to 50 GeV as in the HepData table. The last bin includes overflows. The prediction for a SSM Zprime with masses of 1500, 2000 and 2500 GeV are also provided.
Observed and predicted mTtot distribution for the b-inclusive selection in the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The prediction for a SSM Zprime with masses of 1500, 2000 and 2500 GeV are also provided.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the Drell Yan production cross section times ditau branching fraction as a function of the Zprime boson mass.
Observed and expected 95% CL upper limits on the Higgs boson production cross section times ditau branching fraction as a function of the boson mass and the relative strength of the b-associated production.
Ratio of the 95% CL upper limits on the production cross section times branching fraction for alternate Zprime models with respect to the SSM, both observed and expected are shown.
Acceptance, acceptance times efficiency and b-tag category fraction for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance, acceptance times efficiency and b-tag category fraction for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance and acceptance times efficiency for a heavy gauge boson produced by Drell Yan as a function of the gauge boson mass.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
A search for pair production of a scalar partner of the top quark in events with four or more jets plus missing transverse momentum is presented. An analysis of 36.1 fb$^{-1}$ of $\sqrt{s}$=13 TeV proton-proton collisions collected using the ATLAS detector at the LHC yields no significant excess over the expected Standard Model background. To interpret the results a simplified supersymmetric model is used where the top squark is assumed to decay via $\tilde{t}_1 \rightarrow t^{(*)} \tilde\chi^0_1$ and $\tilde{t}_1\rightarrow b\tilde\chi^\pm_1 \rightarrow b W^{(*)} \tilde\chi^0_1$, where $\tilde\chi^0_1$ ($\chi^\pm_1$) denotes the lightest neutralino (chargino). Exclusion limits are placed in terms of the top-squark and neutralino masses. Assuming a branching ratio of 100% to $t \tilde\chi^0_1$, top-squark masses in the range 450-950 GeV are excluded for $\tilde\chi^0_1$ masses below 160 GeV. In the case where $m_{\tilde{t}_1}\sim m_t+m_{\tilde\chi^0_1}$, top-squark masses in the range 235-590 GeV are excluded.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{t}_1,\tilde\chi^{\pm}_1)=$ (800,100) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (800,100) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{t}_1,\tilde\chi^{\pm}_1)=$ (600,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (600,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
A search for supersymmetry in events with large missing transverse momentum, jets, and at least one hadronically decaying tau lepton has been performed using 3.2 fb$^{-1}$ of proton-proton collision data at $\sqrt{s}=13$ TeV recorded by the ATLAS detector at the Large Hadron Collider in 2015. Two exclusive final states are considered, with either exactly one or at least two tau leptons. No excess over the Standard Model prediction is observed in the data. Results are interpreted in the context of gauge-mediated supersymmetry breaking and a simplified model of gluino pair production with tau-rich cascade decays, substantially improving on previous limits. In the GMSB model considered, supersymmetry-breaking scale ($\Lambda$) values below 92 TeV are excluded at the 95% confidence level, corresponding to gluino masses below 2000 GeV. For large values of $\tan\beta$, values of $\Lambda$ up to 107 TeV and gluino masses up to 2300 GeV are excluded. In the simplified model, gluino masses are excluded up to 1570 GeV for neutralino masses around 100 GeV. Neutralino masses up to 700 GeV are excluded for all gluino masses between 800 GeV and 1500 GeV, while the strongest exclusion of 750 GeV is achieved for gluino masses around 1400 GeV.
mTtau distributions for "extended SR selections" of the 1 tau channel, for the Compressed SR selection without the mTtau > 80 GeV requirement. The last bin includes overflow events. Uncertainties are statistical only. Signal predictions are overlaid for several benchmark models, normalised to their predicted cross sections. For the simplified model, "LM" refers to a low mass splitting, or compressed scenario, with m(gluino)=665 GeV and m(neutralino)=585 GeV; "MM" stands for a medium mass splitting, with m(gluino)=1145 GeV and m(neutralino)=265 GeV; "HM" denotes a high mass splitting scenario, with m(gluino)=1305 GeV and m(neutralino)=105 GeV.
mTtau distributions for "extended SR selections" of the 1 tau channel, for the Medium Mass SR selection without the mTtau > 200 GeV requirement. The last bin includes overflow events. Uncertainties are statistical only. Signal predictions are overlaid for several benchmark models, normalised to their predicted cross sections. For the simplified model, "LM" refers to a low mass splitting, or compressed scenario, with m(gluino)=665 GeV and m(neutralino)=585 GeV; "MM" stands for a medium mass splitting, with m(gluino)=1145 GeV and m(neutralino)=265 GeV; "HM" denotes a high mass splitting scenario, with m(gluino)=1305 GeV and m(neutralino)=105 GeV.
mTtau distributions for "extended SR selections" of the 1 tau channel, for the High Mass SR selection without the mTtau > 200 GeV requirement. The last bin includes overflow events. Uncertainties are statistical only. Signal predictions are overlaid for several benchmark models, normalised to their predicted cross sections. For the simplified model, "LM" refers to a low mass splitting, or compressed scenario, with m(gluino)=665 GeV and m(neutralino)=585 GeV; "MM" stands for a medium mass splitting, with m(gluino)=1145 GeV and m(neutralino)=265 GeV; "HM" denotes a high mass splitting scenario, with m(gluino)=1305 GeV and m(neutralino)=105 GeV.
Kinematic distributions for "extended SR selections" of the 2-tau channel, for mTsum in the Compressed SR selection without the mTsum>1400 GeV requirement. The last bin includes overflow events. Cited uncertainties are statistical uncertainties only. Signal predictions are overlaid for several benchmark models, normalised to their predicted cross sections. For the simplified model, "MM" refers to a medium mass splitting, with m(gluino)=1145 GeV and m(neutralino)=265 GeV; "HM" denotes a high mass splitting scenario, with m(gluino)=1305 GeV and m(neutralino)=105 GeV. The GMSB benchmark model corresponds to Lambda = 90 TeV and tanbeta = 40.
Kinematic distributions for "extended SR selections" of the 2-tau channel, for mTtau1+mTtau2 in the High-Mass SR selection without the mTtau1+mTtau2>350GeV requirement. The last bin includes overflow events. Cited uncertainties are statistical uncertainties only. Signal predictions are overlaid for several benchmark models, normalised to their predicted cross sections. For the simplified model, "MM" refers to a medium mass splitting, with m(gluino)=1145 GeV and m(neutralino)=265 GeV; "HM" denotes a high mass splitting scenario, with m(gluino)=1305 GeV and m(neutralino)=105 GeV. The GMSB benchmark model corresponds to Lambda = 90 TeV and tanbeta = 40.
Kinematic distributions for "extended SR selections" of the 2-tau channel, for HT in the GMSB SR selection without the HT > 1700 GeV requirement. The last bin includes overflow events. Cited uncertainties are statistical uncertainties only. Signal predictions are overlaid for several benchmark models, normalised to their predicted cross sections. For the simplified model, "MM" refers to a medium mass splitting, with m(gluino)=1145 GeV and m(neutralino)=265 GeV; "HM" denotes a high mass splitting scenario, with m(gluino)=1305 GeV and m(neutralino)=105 GeV. The GMSB benchmark model corresponds to Lambda = 90 TeV and tanbeta = 40.
Expected exclusion contour at the 95% confidence level for the simplified model of gluino pair production, based on the combined results from the 1tau and 2tau channel. The result is obtained using 3.2 fb-1 of sqrt(s) = 13 TeV ATLAS data.
Observed exclusion contour at the 95% confidence level for the simplified model of gluino pair production, based on the combined results from the 1tau and 2tau channel. The result is obtained using 3.2 fb-1 of sqrt(s) = 13 TeV ATLAS data.
Expected exclusion contour at the 95% confidence level for the simplified model of gluino pair production, based on results from the 2tau channel. The result is obtained using 3.2 fb-1 of sqrt(s) = 13 TeV ATLAS data.
Expected exclusion contour at the 95% confidence level for the simplified model of gluino pair production, based on results from the 1tau channel. The result is obtained using 3.2 fb-1 of sqrt(s) = 13 TeV ATLAS data.
Observed exclusion contours at the 95% confidence level for the gauge-mediated supersymmetry-breaking model, based on results from the 2 tau channel. The result is obtained using 3.2 fb-1 of sqrt(s) = 13 TeV ATLAS data. Additional model parameters are M(mess) = 250 TeV, N5 = 3, mu>0 and Cgrav =1.
Expected exclusion contours at the 95% confidence level for the gauge-mediated supersymmetry-breaking model, based on results from the 2 tau channel. The result is obtained using 3.2 fb-1 of sqrt(s) = 13 TeV ATLAS data. Additional model parameters are M(mess) = 250 TeV, N5 = 3, mu>0 and Cgrav =1.
Observed upper cross section limits in pb for the simplified model of gluino pair production for the combination of all SRs.
Best expected signal region for the simplified model of gluino pair production. The respective SR has been used in the combination of the results.
Acceptance for the gluino production simplified model grid in the Compressed 1tau signal region.
Efficiency for the gluino production simplified model grid in the Compressed 1tau signal region.
Acceptance times Efficiency for the gluino production simplified model grid in the Compressed 1tau signal region.
Acceptance for the gluino production simplified model grid in the medium mass 1tau signal region.
Efficiency for the gluino production simplified model grid in the medium mass 1tau signal region.
Acceptance times Efficiency for the gluino production simplified model grid in the medium mass 1tau signal region.
Acceptance for the gluino production simplified model grid in the high mass 1tau signal region.
Efficiency for the gluino production simplified model grid in the high mass 1tau signal region.
Acceptance times Efficiency for the gluino production simplified model grid in the high mass 1tau signal region.
Acceptance for the gluino production simplified model grid in the compressed 2tau signal region.
Efficiency for the gluino production simplified model grid in the compressed 2tau signal region.
Acceptance times Efficiency for the gluino production simplified model grid in the compressed 2tau signal region.
Acceptance for the gluino production simplified model grid in the high mass 2tau signal region.
Efficiency for the gluino production simplified model grid in the high mass 2tau signal region.
Acceptance times Efficiency for the gluino production simplified model grid in the high mass 2tau signal region.
Acceptance for the GMSB model grid in the 2tau signal region.
Efficiency for the GMSB model grid in the 2tau signal region.
Acceptance times Efficiency for the GMSB model grid in the 2tau signal region.
The result of a search for pair production of the supersymmetric partner of the Standard Model bottom quark ($\tilde{b}_1$) is reported. The search uses 3.2 fb$^{-1}$ of $pp$ collisions at $\sqrt{s}=$13 TeV collected by the ATLAS experiment at the Large Hadron Collider in 2015. Bottom squarks are searched for in events containing large missing transverse momentum and exactly two jets identified as originating from $b$-quarks. No excess above the expected Standard Model background yield is observed. Exclusion limits at 95% confidence level on the mass of the bottom squark are derived in phenomenological supersymmetric $R$-parity-conserving models in which the $\tilde{b}_1$ is the lightest squark and is assumed to decay exclusively via $\tilde{b}_1 \rightarrow b \tilde{\chi}_1^0$, where $\tilde{\chi}_1^0$ is the lightest neutralino. The limits significantly extend previous results; bottom squark masses up to 800 (840) GeV are excluded for the $\tilde{\chi}_1^0$ mass below 360 (100) GeV whilst differences in mass above 100 GeV between the $\tilde{b}_1$ and the $\tilde{\chi}_1^0$ are excluded up to a $\tilde{b}_1$ mass of 500 GeV.
Expected exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario.
Signal region (SR) providing the best expected sensitivity in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane.
Cross-section upper limit in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the best expected signal region.
Cross-section upper limit in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRA250 signal region.
Cross-section upper limit in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRA350 signal region.
Cross-section upper limit in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRA450 signal region.
Cross-section upper limit in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRB signal region.
Expected CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the best expected signal region.
Expected CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRA250 signal region.
Expected exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for signal region SRA250.
Observed exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for signal region SRA250.
Expected CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRA350 signal region.
Expected exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for signal region SRA350.
Observed exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for signal region SRA350.
Expected CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRA450 signal region.
Expected exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for signal region SRA450.
Observed exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for signal region SRA450.
Expected CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRB signal region.
Expected exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for signal region SRB.
Observed exclusion limit at 95% CL in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for signal region SRB.
Observed CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the best expected signal region.
Observed CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRA250 signal region.
Observed CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRA350 signal region.
Observed CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRA450 signal region.
Observed CLs values in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the SRB signal region.
Signal efficiency (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the best expected signal region.
Signal efficiency (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the SRA250 signal region.
Signal efficiency (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the SRA350 signal region.
Signal efficiency (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the SRA450 signal region.
Signal efficiency (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the SRB signal region.
Signal acceptance (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the best expected signal region.
Signal acceptance (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the SRA250 signal region.
Signal acceptance (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the SRA350 signal region.
Signal acceptance (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the SRA450 signal region.
Signal acceptance (in %) in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane for the sbottom pair production scenario, for the SRB signal region.
Total experimental systematic uncertainty in percent on the signal efficiency times acceptance in the $m(\tilde b_1)$-$m(\tilde\chi^0_1)$ plane. The best expected signal region selection is used per point.
A search for $W^\prime$ bosons in events with one lepton (electron or muon) and missing transverse momentum is presented. The search uses 3.2 fb$^{-1}$ of $pp$ collision data collected at $\sqrt{s} = 13$ TeV by the ATLAS experiment at the LHC in 2015. The transverse mass distribution is examined and no significant excess of events above the level expected from Standard Model processes is observed. Upper limits on the $W^\prime$ boson cross-section times branching ratio to leptons are set as a function of the $W^\prime$ mass. Assuming a $W^\prime$ boson as predicted by the Sequential Standard Model, $W^\prime$ masses below 4.07 TeV are excluded at the 95% confidence level. This extends the limit set using LHC data at $\sqrt{s}=8$ TeV by around 800 GeV.
Observed and predicted electron channel transverse mass (MT) distribution in the search region. The bin width is constant in log(MT).
Observed and predicted muon channel transverse mass (MT) distribution in the search region. The bin width is constant in log(MT).
W' Product of acceptance and efficiency for the electron and muon selections as a function of the SSM W' pole mass.
Median expected and observed 95% CL upper limits on the cross-section times branching ratio (sigma*B) for W'_SSM production for the exclusive muon and electron channels, and for both channels combined.
The results of a search for the stop, the supersymmetric partner of the top quark, in final states with one isolated electron or muon, jets, and missing transverse momentum are reported. The search uses the 2015 LHC $pp$ collision data at a center-of-mass energy of $\sqrt{s}=13$ TeV recorded by the ATLAS detector and corresponding to an integrated luminosity of 3.2 fb${}^{-1}$. The analysis targets two types of signal models: gluino-mediated pair production of stops with a nearly mass-degenerate stop and neutralino; and direct pair production of stops, decaying to the top quark and the lightest neutralino. The experimental signature in both signal scenarios is similar to that of a top quark pair produced in association with large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits on gluino and stop masses are set at 95% confidence level. The results extend the LHC Run-1 exclusion limit on the gluino mass up to 1460 GeV in the gluino-mediated scenario in the high gluino and low stop mass region, and add an excluded stop mass region from 745 to 780 GeV for the direct stop model with a massless lightest neutralino. The results are also reinterpreted to set exclusion limits in a model of vector-like top quarks.
Comparison of data with estimated backgrounds in the $am_\text{T2}$ distribution with the STCR1 event selection except for the requirement on $am_\text{T2}$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $b$-tagged jet multiplicity with the STCR1 event selection except for the requirement on the $b$-tagged jet multiplicity. Furthermore, the $\Delta R(b_1,b_2)$ requirement is dropped. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $\Delta R(b_1,b_2)$ distribution with the STCR1 event selection except for the requirement on $\Delta R(b_1,b_2)$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $\tilde{E}_\text{T}^\text{miss}$ distribution with the TZCR1 event selection except for the requirement on $\tilde{E}_\text{T}^\text{miss}$. The variables $\tilde{E}_\text{T}^\text{miss}$ and $\tilde{m}_\text{T}$ are constructed in the same way as $E_\text{T}^\text{miss}$ and $m_\text{T}$ but treating the leading photon transverse momentum as invisible. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $\tilde{m}_\text{T}$ distribution with the TZCR1 event selection except for the requirement on $\tilde{m}_\text{T}$. The variables $\tilde{E}_\text{T}^\text{miss}$ and $\tilde{m}_\text{T}$ are constructed in the same way as $E_\text{T}^\text{miss}$ and $m_\text{T}$ but treating the leading photon transverse momentum as invisible. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of the observed data ($n_\text{obs}$) with the predicted background ($n_\text{exp}$) in the validation and signal regions. The background predictions are obtained using the background-only fit configuration. The bottom panel shows the significance of the difference between data and predicted background, where the significance is based on the total uncertainty ($\sigma_\text{tot}$).
Jet multiplicity distributions for events where exactly two signal leptons are selected. No correction factors are included in the background normalizations. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Jet multiplicity distributions for events where exactly one lepton plus one $\tau$ candidate are selected. No correction factors are included in the background normalizations. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
The $E_\text{T}^\text{miss}$ distribution in SR1. In the plot, the full event selection in the corresponding signal region is applied, except for the requirement on $E_\text{T}^\text{miss}$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin contains the overflow. Benchmark signal models are overlaid for comparison. The benchmark models are specified by the gluino and stop masses, given in TeV in the table.
The $m_\text{T}$ distribution in SR1. In the plot, the full event selection in the corresponding signal region is applied, except for the requirement on $m_\text{T}$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin contains the overflow. Benchmark signal models are overlaid for comparison. The benchmark models are specified by the gluino and stop masses, given in TeV in the table.
Expected (black dashed) 95% excluded regions in the plane of $m_{\tilde{g}}$ versus $m_{\tilde{t}_1}$ for gluino-mediated stop production.
Observed (red solid) 95% excluded regions in the plane of $m_{\tilde{g}}$ versus $m_{\tilde{t}_1}$ for gluino-mediated stop production.
Expected (black dashed) 95% excluded regions in the plane of $m_{\tilde{t}_1}$ versus $m_{\tilde{\chi}_1^0}$ for direct stop production.
Observed (red solid) 95% excluded regions in the plane of $m_{\tilde{t}_1}$ versus $m_{\tilde{\chi}_1^0}$ for direct stop production.
The expected upper limits on $T$ quark pair production times the squared branching ratio for $T \rightarrow tZ$ as a function of the $T$ quark mass.
The observed upper limits on $T$ quark pair production times the squared branching ratio for $T \rightarrow tZ$ as a function of the $T$ quark mass.
The expected limits on $T$ quarks as a function of the branching ratios $B\left(T \rightarrow bW\right)$ and $B\left(T \rightarrow tH\right)$ for a $T$ quark with a mass of 800 GeV. The $T$ is assumed to decay in three possible ways: $T \to tZ$, $T \to tH$, and $T \to bW$.
The observed limits on $T$ quarks as a function of the branching ratios $B\left(T \rightarrow bW\right)$ and $B\left(T \rightarrow tH\right)$ for a $T$ quark with a mass of 800 GeV. The $T$ is assumed to decay in three possible ways: $T \to tZ$, $T \to tH$, and $T \to bW$.
The $m_\text{T}$ distribution in the WVR2-tail validation region which has the same preselection and jet $p_\text{T}$ requirements as SR2.
The $am_\text{T2}$ distribution in the WVR2-tail validation region which has the same preselection and jet $p_\text{T}$ requirements as SR2.
Large-radius jet mass ($R=1.2$), decomposed into the number of small-radius jet constituents. The lower panel shows the ratio of the total data to the total prediction (summed over all jet multiplicities). Events are required to have one lepton, four jets with $p_\text{T}>80,50,40,40$ GeV, at least one $b$-tagged jet, $E_\text{T}^\text{miss}>200$ GeV, and $m_\text{T}>30$ GeV.
Distribution of $m_\text{T2}^\tau$ in data for a selection enriched in $t\bar{t}$ events with one hadronically decaying $\tau$. Events that have no hadronic $\tau$ candidate (that passes the Loose identification criteria, as well as other requirements) are not shown in the plot.
Upper limits on the model cross-section in units of pb for the gluino-mediated stop models.
Upper limits on the model cross-section in units of pb for the models with direct stop pair production.
Illustration of the best expected signal region per signal grid point for the gluino-mediated stop models. This mapping is used for the final combined exclusion limits.
Illustration of the best expected signal region per signal grid point for models with direct stop pair production. This mapping is used for the final combined exclusion limits.
Expected $CL_s$ values for the gluino-mediated stop models.
Observed $CL_s$ values for the gluino-mediated stop models.
Expected $CL_s$ values for the direct stop pair production models.
Observed $CL_s$ values for the direct stop pair production models.
Expected limit using SR1 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Expected limit using SR1 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Expected limit using SR1 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Observed limit using SR1 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Observed limit using SR1 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Observed limit using SR1 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Expected limit using SR2 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Expected limit using SR2 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Expected limit using SR2 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Observed limit using SR2 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Observed limit using SR2 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Observed limit using SR2 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Expected limit using SR1+SR2 (best expected) for models with direct stop pair production and an unpolarized stop (and bino LSP).
Expected limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Expected limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Observed limit using SR1+SR2 (best expected) for models with direct stop pair production and an unpolarized stop (and bino LSP).
Observed limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Observed limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Acceptance for SR1 in the gluino-mediated stop models. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR1 in the direct stop pair production. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR2 in the gluino-mediated stop models. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR2 in the direct stop pair production. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR3 in the gluino-mediated stop models. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR3 in the direct stop pair production. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Efficiency for SR1 in the gluino-mediated stop models. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR1 in the direct stop pair production. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR2 in the gluino-mediated stop models. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR2 in the direct stop pair production. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR3 in the gluino-mediated stop models. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR3 in the direct stop pair production. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
A search for Supersymmetry involving the pair production of gluinos decaying via third-generation squarks to the lightest neutralino is reported. It uses an LHC proton--proton dataset at a center-of-mass energy $\sqrt{s} = 13$ TeV with an integrated luminosity of 3.2 fb$^{-1}$ collected with the ATLAS detector in 2015. The signal is searched for in events containing several energetic jets, of which at least three must be identified as $b$-jets, large missing transverse momentum and, potentially, isolated electrons or muons. Large-radius jets with a high mass are also used to identify highly boosted top quarks. No excess is found above the predicted background. For neutralino masses below approximately 700 GeV, gluino masses of less than 1.78 TeV and 1.76 TeV are excluded at the 95% CL in simplified models of the pair production of gluinos decaying via sbottom and stop, respectively. These results significantly extend the exclusion limits obtained with the $\sqrt{s} = 8$ TeV dataset.
Distribution of missing transverse energy for SR-Gbb-B.
Distribution of missing transverse energy for SR-Gtt-0L-C.
Distribution of missing transverse energy for SR-Gtt-1L-A.
Expected 95% CL exclusion contour for the Gbb signal.
Observed 95% CL exclusion contour for the Gbb signal.
Expected 95% CL exclusion contour for the Gtt combination.
Observed 95% CL exclusion contour for the Gtt combination.
Acceptances for the Gbb model in SR-Gbb-A. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gbb model in SR-Gbb-B. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gbb model in SR-Gbb-C. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-0L-A. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-0L-B. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-0L-C. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-1L-A. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-1L-B. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptance times efficiency for the Gbb model in SR-Gbb-A.
Acceptance times efficiency for the Gbb model in SR-Gbb-B.
Acceptance times efficiency for the Gbb model in SR-Gbb-C.
Acceptance times efficiency for the Gtt model in SR-Gtt-0L-A.
Acceptance times efficiency for the Gtt model in SR-Gtt-0L-B.
Acceptance times efficiency for the Gtt model in SR-Gtt-0L-C.
Acceptance times efficiency for the Gtt model in SR-Gtt-1L-A.
Acceptance times efficiency for the Gtt model in SR-Gtt-1L-B.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gbb model in SR-Gbb-A.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gbb model in SR-Gbb-B.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gbb model in SR-Gbb-C.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-0L-A.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-0L-B.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-0L-C.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-1L-A.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-1L-B.
Signal region yielding the best expected sensitivity for each point of the parameter space in the Gbb model.
Signal region yielding the best expected sensitivity for each point of the parameter space in the Gtt model for the 0-lepton channel.
Signal region yielding the best expected sensitivity for each point of the parameter space in the Gtt model for the 1-lepton channel.
Combination of two 0-lepton and 1-lepton signal regions yielding the best expected sensitivity for each point of the parameter space in the Gtt model.
A search for squarks and gluinos in final states containing hadronic jets, missing transverse momentum but no electrons or muons is presented. The data were recorded in 2015 by the ATLAS experiment in $\sqrt{s}=$ 13 TeV proton--proton collisions at the Large Hadron Collider. No excess above the Standard Model background expectation was observed in 3.2 fb$^{-1}$ of analyzed data. Results are interpreted within simplified models that assume R-parity is conserved and the neutralino is the lightest supersymmetric particle. An exclusion limit at the 95% confidence level on the mass of the gluino is set at 1.51 TeV for a simplified model incorporating only a gluino octet and the lightest neutralino, assuming the lightest neutralino is massless. For a simplified model involving the strong production of mass-degenerate first- and second-generation squarks, squark masses below 1.03 TeV are excluded for a massless lightest neutralino. These limits substantially extend the region of supersymmetric parameter space excluded by previous measurements with the ATLAS detector.
Observed and expected background effective mass distributions in control region CRgamma for SR4jt.
Observed and expected background effective mass distributions in control region CRW for SR4jt.
Observed and expected background effective mass distributions in control region CRT for SR4jt.
Observed and expected background and signal effective mass distributions for SR2jl. For signal, a squark direct decay model with $m(\tilde q)=800$ GeV and $m(\tilde\chi^0_1)=400$ GeV is shown.
Observed and expected background and signal effective mass distributions for SR2jm. For signal, a gluino direct decay model with $m(\tilde g)=750$ GeV and $m(\tilde\chi^0_1)=660$ GeV is shown.
Observed and expected background and signal effective mass distributions for SR2jt. For signal, a squark direct decay model with $m(\tilde q)=1200$ GeV and $m(\tilde\chi^0_1)=0$ GeV is shown.
Observed and expected background and signal effective mass distributions for SR4jt. For signal, a gluino direct decay model with $m(\tilde g)=1400$ GeV and $m(\tilde\chi^0_1)=0$ GeV is shown.
Observed and expected background and signal effective mass distributions for SR5j. For signal, a gluino one-step decay model with $m(\tilde g)=1265$ GeV, $m(\tilde\chi^\pm_1)=945$ GeV and $m(\tilde\chi^0_1)=625$ GeV is shown.
Observed and expected background and signal effective mass distributions for SR6jm. For signal, a gluino one-step decay model with $m(\tilde g)=1265$ GeV, $m(\tilde\chi^\pm_1)=945$ GeV and $m(\tilde\chi^0_1)=625$ GeV is shown.
Observed and expected background and signal effective mass distributions for SR6jt. For signal, a gluino one-step decay model with $m(\tilde g)=1385$ GeV, $m(\tilde\chi^\pm_1)=705$ GeV and $m(\tilde\chi^0_1)=25$ GeV is shown.
Expected limit at 95% CL for squark direct decay model grid.
Expected limits at 95% CL +1 sigma excursion due to experimental and background-only theoretical uncertainties for squark direct decay model grid.
Expected limits at 95% CL -1 sigma excursion due to experimental and background-only theoretical uncertainties for squark direct decay model grid.
Observed limits at 95% CL for squark direct decay model grid.
Observed limits at 95% CL +1 sigma excursion due to the signal cross-section uncertainty for squark direct decay model grid.
Observed limits at 95% CL -1 sigma excursion due to the signal cross-section uncertainty for squark direct decay model grid.
Expected limit at 95% CL for gluino direct decay model grid.
Expected limits at 95% CL +1 sigma excursion due to experimental and background-only theoretical uncertainties for gluino direct decay model grid.
Expected limits at 95% CL -1 sigma excursion due to experimental and background-only theoretical uncertainties for gluino direct decay model grid.
Observed limits at 95% CL for gluino direct decay model grid.
Observed limits at 95% CL +1 sigma excursion due to the signal cross-section uncertainty for gluino direct decay model grid.
Observed limits at 95% CL -1 sigma excursion due to the signal cross-section uncertainty for gluino direct decay model grid.
Expected limit at 95% CL for gluino one-step decay model grid.
Expected limits at 95% CL +1 sigma excursion due to experimental and background-only theoretical uncertainties for gluino one-step decay model grid.
Expected limits at 95% CL -1 sigma excursion due to experimental and background-only theoretical uncertainties for gluino one-step decay model grid.
Observed limits at 95% CL for gluino one-step decay model grid.
Observed limits at 95% CL +1 sigma excursion due to the signal cross-section uncertainty for gluino one-step decay model grid.
Observed limits at 95% CL -1 sigma excursion due to the signal cross-section uncertainty for gluino one-step decay model grid.
Observed and expected background effective mass distributions in control region CRgamma for SR2jl.
Observed and expected background effective mass distributions in validation region VRZ for SR2jl.
Observed and expected background effective mass distributions in control region CRW for SR2jl.
Observed and expected background effective mass distributions in control region CRT for SR2jl.
Observed and expected background effective mass distributions in control region CRgamma for SR2jm.
Observed and expected background effective mass distributions in validation region VRZ for SR2jm.
Observed and expected background effective mass distributions in control region CRW for SR2jm.
Observed and expected background effective mass distributions in control region CRT for SR2jm.
Observed and expected background effective mass distributions in control region CRgamma for SR2jt.
Observed and expected background effective mass distributions in validation region VRZ for SR2jt.
Observed and expected background effective mass distributions in control region CRW for SR2jt.
Observed and expected background effective mass distributions in control region CRT for SR2jt.
Observed and expected background effective mass distributions in control region CRgamma for SR4jt.
Observed and expected background effective mass distributions in validation region VRZ for SR4jt.
Observed and expected background effective mass distributions in control region CRW for SR4jt.
Observed and expected background effective mass distributions in control region CRT for SR4jt.
Observed and expected background effective mass distributions in control region CRgamma for SR5j.
Observed and expected background effective mass distributions in validation region VRZ for SR5j.
Observed and expected background effective mass distributions in control region CRW for SR5j.
Observed and expected background effective mass distributions in control region CRT for SR5j.
Observed and expected background effective mass distributions in control region CRgamma for SR6jm.
Observed and expected background effective mass distributions in validation region VRZ for SR6jm.
Observed and expected background effective mass distributions in control region CRW for SR6jm.
Observed and expected background effective mass distributions in control region CRT for SR6jm.
Observed and expected background effective mass distributions in control region CRgamma for SR6jt.
Observed and expected background effective mass distributions in validation region VRZ for SR6jt.
Observed and expected background effective mass distributions in control region CRW for SR6jt.
Observed and expected background effective mass distributions in control region CRT for SR6jt.
Observed and expected event yields in VRZ as a function of signal region.
Observed and expected event yields in VRW as a function of signal region.
Observed and expected event yields in VRWv as a function of signal region.
Observed and expected event yields in VRT as a function of signal region.
Observed and expected event yields in VRTv as a function of signal region.
Observed and expected event yields in VRQa as a function of signal region.
Observed and expected event yields in VRQb as a function of signal region.
Signal acceptance for SR2jl in squark direct decay model grid.
Signal acceptance times efficiency for SR2jl in squark direct decay model grid.
Signal acceptance for SR2jm in squark direct decay model grid.
Signal acceptance times efficiency for SR2jm in squark direct decay model grid.
Signal acceptance for SR2jt in squark direct decay model grid.
Signal acceptance times efficiency for SR2jt in squark direct decay model grid.
Signal acceptance for SR4jt in squark direct decay model grid.
Signal acceptance times efficiency for SR4jt in squark direct decay model grid.
Signal acceptance for SR5j in squark direct decay model grid.
Signal acceptance times efficiency for SR5j in squark direct decay model grid.
Signal acceptance for SR6jm in squark direct decay model grid.
Signal acceptance times efficiency for SR6jm in squark direct decay model grid.
Signal acceptance for SR6jt in squark direct decay model grid.
Signal acceptance times efficiency for SR6jt in squark direct decay model grid.
Signal acceptance for SR2jl in gluino direct decay model grid.
Signal acceptance times efficiency for SR2jl in gluino direct decay model grid.
Signal acceptance for SR2jm in gluino direct decay model grid.
Signal acceptance times efficiency for SR2jm in gluino direct decay model grid.
Signal acceptance for SR2jt in gluino direct decay model grid.
Signal acceptance times efficiency for SR2jt in gluino direct decay model grid.
Signal acceptance for SR4jt in gluino direct decay model grid.
Signal acceptance times efficiency for SR4jt in gluino direct decay model grid.
Signal acceptance for SR5j in gluino direct decay model grid.
Signal acceptance times efficiency for SR5j in gluino direct decay model grid.
Signal acceptance for SR6jm in gluino direct decay model grid.
Signal acceptance times efficiency for SR6jm in gluino direct decay model grid.
Signal acceptance for SR6jt in gluino direct decay model grid.
Signal acceptance times efficiency for SR6jt in gluino direct decay model grid.
Signal acceptance for SR2jl in gluino one-step decay model grid.
Signal acceptance times efficiency for SR2jl in gluino one-step decay model grid.
Signal acceptance for SR2jm in gluino one-step decay model grid.
Signal acceptance times efficiency for SR2jm in gluino one-step decay model grid.
Signal acceptance for SR2j5 in gluino one-step decay model grid.
Signal acceptance times efficiency for SR2jt in gluino one-step decay model grid.
Signal acceptance for SR4jt in gluino one-step decay model grid.
Signal acceptance times efficiency for SR4jt in gluino one-step decay model grid.
Signal acceptance for SR5j in gluino one-step decay model grid.
Signal acceptance times efficiency for SR5j in gluino one-step decay model grid.
Signal acceptance for SR6jm in gluino one-step decay model grid.
Signal acceptance times efficiency for SR6jm in gluino one-step decay model grid.
Signal acceptance for SR6jt in gluino one-step decay model grid.
Signal acceptance times efficiency for SR6jt in gluino one-step decay model grid.
A search for strongly produced supersymmetric particles is conducted using signatures involving multiple energetic jets and either two isolated leptons ($e$ or $\mu$) with the same electric charge or at least three isolated leptons. The search also utilises $b$-tagged jets, missing transverse momentum and other observables to extend its sensitivity. The analysis uses a data sample of proton-proton collisions at $\sqrt{s}=13$ TeV recorded with the ATLAS detector at the Large Hadron Collider in 2015 corresponding to a total integrated luminosity of 3.2 fb$^{-1}$. No significant excess over the Standard Model expectation is observed. The results are interpreted in several simplified supersymmetric models and extend the exclusion limits from previous searches. In the context of exclusive production and simplified decay modes, gluino masses are excluded at 95% confidence level up to 1.1-1.3 TeV for light neutralinos (depending on the decay channel), and bottom squark masses are also excluded up to 540 GeV. In the former scenarios, neutralino masses are also excluded up to 550-850 GeV for gluino masses around 1 TeV.
Missing transverse momentum distribution after SR0b3j selection, beside the $E_\mathrm{T}^\mathrm{miss}$ requirement. The results in the signal region correspond to the last inclusive bin. The systematic uncertainties include theory uncertainties for the backgrounds with prompt SS/3L and the full systematic uncertainties for data-driven backgrounds. For illustration the distribution for a benchmark SUSY scenario ($pp\to \tilde g\tilde g$, $\tilde g\to qq(\tilde\ell\ell/\tilde\nu\nu)$, $m_{\tilde g}=1.3$ TeV, $m_{\tilde\chi_1^0}=0.5$ TeV) is also shown.
Missing transverse momentum distribution after SR0b5j selection, beside the $E_\mathrm{T}^\mathrm{miss}$ requirement. The results in the signal region correspond to the last inclusive bin. The systematic uncertainties include theory uncertainties for the backgrounds with prompt SS/3L and the full systematic uncertainties for data-driven backgrounds. For illustration the distribution for a benchmark SUSY scenario ($pp\to \tilde g\tilde g$, $\tilde g\to qqWZ\tilde\chi_1^0$, $m_{\tilde g}=1.1$ TeV, $m_{\tilde\chi_1^0}=0.4$ TeV) is also shown.
Missing transverse momentum distribution after SR1b selection, beside the $E_\mathrm{T}^\mathrm{miss}$ requirement. The results in the signal region correspond to the last inclusive bin. The systematic uncertainties include theory uncertainties for the backgrounds with prompt SS/3L and the full systematic uncertainties for data-driven backgrounds. For illustration the distribution for a benchmark SUSY scenario ($pp\to \tilde b_1\tilde b_1^*$, $\tilde b_1\to tW\tilde\chi_1^0$, $m_{\tilde b_1}=600$ GeV, $m_{\tilde\chi_1^0}=50$ GeV) is also shown.
Missing transverse momentum distribution after SR3b selection, beside the $E_\mathrm{T}^\mathrm{miss}$ requirement. The results in the signal region correspond to the last inclusive bin. The systematic uncertainties include theory uncertainties for the backgrounds with prompt SS/3L and the full systematic uncertainties for data-driven backgrounds. For illustration the distribution for a benchmark SUSY scenario ($pp\to \tilde g\tilde g$, $\tilde g\to t\bar t\tilde\chi_1^0$, $m_{\tilde g}=1.2$ TeV, $m_{\tilde\chi_1^0}=0.7$ TeV) is also shown.
Observed exclusion limits on the $\tilde g$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde g\tilde g$ pair production with exclusive $\tilde g\to qq(\tilde\ell\ell/\tilde\nu\nu)$ decays. All limits are computed at 95% CL.
Expected exclusion limits on the $\tilde g$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde g\tilde g$ pair production with exclusive $\tilde g\to qq(\tilde\ell\ell/\tilde\nu\nu)$ decays. All limits are computed at 95% CL.
Upper limits on signal cross-sections as function of the $\tilde g$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde g\tilde g$ pair production with exclusive $\tilde g\to qq(\tilde\ell\ell/\tilde\nu\nu)$ decays, obtained using the signal efficiency and acceptance specific to each model. All limits are computed at 95% CL.
Observed exclusion limits on the $\tilde g$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde g\tilde g$ pair production with exclusive $\tilde g\to qqWZ\tilde\chi_1^0$ decays. All limits are computed at 95% CL.
Expected exclusion limits on the $\tilde g$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde g\tilde g$ pair production with exclusive $\tilde g\to qqWZ\tilde\chi_1^0$ decays. All limits are computed at 95% CL.
Upper limits on signal cross-sections as function of the $\tilde g$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde g\tilde g$ pair production with exclusive $\tilde g\to qqWZ\tilde\chi_1^0$ decays, obtained using the signal efficiency and acceptance specific to each model. All limits are computed at 95% CL.
Observed exclusion limits on the $\tilde b_1$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde b_1\tilde b_1^*$ pair production with exclusive $\tilde b_1\to t\tilde\chi_1^-$ decays. All limits are computed at 95% CL.
Expected exclusion limits on the $\tilde b_1$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde b_1\tilde b_1^*$ pair production with exclusive $\tilde b_1\to t\tilde\chi_1^-$ decays. All limits are computed at 95% CL.
Upper limits on signal cross-sections as function of the $\tilde b_1$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde b_1\tilde b_1^*$ pair production with exclusive $\tilde b_1\to t\tilde\chi_1^-$ decays, obtained using the signal efficiency and acceptance specific to each model. All limits are computed at 95% CL.
Observed exclusion limits on the $\tilde g$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde g\tilde g$ pair production with exclusive $\tilde g\to t\bar t\tilde\chi_1^0$ decays. All limits are computed at 95% CL.
Expected exclusion limits on the $\tilde g$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde g\tilde g$ pair production with exclusive $\tilde g\to t\bar t\tilde\chi_1^0$ decays. All limits are computed at 95% CL.
Upper limits on signal cross-sections as function of the $\tilde g$ and $\tilde\chi_1^0$ masses in the context of SUSY scenarios with simplified mass spectra featuring $\tilde g\tilde g$ pair production with exclusive $\tilde g\to t\bar t\tilde\chi_1^0$ decays, obtained using the signal efficiency and acceptance specific to each model. All limits are computed at 95% CL.
SUSY scenario with $\tilde g\tilde g$ production and $\tilde g\to q\bar q(\tilde\ell\ell/\tilde\nu\nu)$ decay: signal acceptance (in %) in the signal region SR0b3j. The benchmark scenarios used to set exclusion limits are materialized by black dot markers. Acceptance and efficiency are defined as in appendix A of [JHEP 06 (2014) 124, arXiv: 1403.4853v1 [hep-ex]].
SUSY scenario with $\tilde g\tilde g$ production and $\tilde g\to q\bar q(\tilde\ell\ell/\tilde\nu\nu)$ decay: reconstruction efficiency (in %) in the signal region SR0b3j. The benchmark scenarios used to set exclusion limits are materialized by black dot markers. Acceptance and efficiency are defined as in appendix A of [JHEP 06 (2014) 124, arXiv: 1403.4853v1 [hep-ex]].
SUSY scenario with $\tilde g\tilde g$ production and $\tilde g\to q\bar qWZ\tilde\chi_1^0$ decay: signal acceptance (in %) in the signal region SR0b5j. The benchmark scenarios used to set exclusion limits are materialized by black dot markers. Acceptance and efficiency are defined as in appendix A of [JHEP 06 (2014) 124, arXiv: 1403.4853v1 [hep-ex]].
SUSY scenario with $\tilde g\tilde g$ production and $\tilde g\to q\bar qWZ\tilde\chi_1^0$ decay: reconstruction efficiency (in %) in the signal region SR0b5j. The benchmark scenarios used to set exclusion limits are materialized by black dot markers. Acceptance and efficiency are defined as in appendix A of [JHEP 06 (2014) 124, arXiv: 1403.4853v1 [hep-ex]].
SUSY scenario with $\tilde b_1\tilde b_1^*$ production and $\tilde b_1\to tW\tilde\chi_1^0$ decay: signal acceptance (in %) in the signal region SR1b. The benchmark scenarios used to set exclusion limits are materialized by black dot markers. Acceptance and efficiency are defined as in appendix A of [JHEP 06 (2014) 124, arXiv: 1403.4853v1 [hep-ex]].
SUSY scenario with $\tilde b_1\tilde b_1^*$ production and $\tilde b_1\to tW\tilde\chi_1^0$ decay: reconstruction efficiency (in %) in the signal region SR1b. The benchmark scenarios used to set exclusion limits are materialized by black dot markers. Acceptance and efficiency are defined as in appendix A of [JHEP 06 (2014) 124, arXiv: 1403.4853v1 [hep-ex]].
SUSY scenario with $\tilde g\tilde g$ production and $\tilde g\to t\bar t\tilde\chi_1^0$ decay: signal acceptance (in %) in the signal region SR3b. The benchmark scenarios used to set exclusion limits are materialized by black dot markers. Acceptance and efficiency are defined as in appendix A of [JHEP 06 (2014) 124, arXiv: 1403.4853v1 [hep-ex]].
SUSY scenario with $\tilde g\tilde g$ production and $\tilde g\to t\bar t\tilde\chi_1^0$ decay: reconstruction efficiency (in %) in the signal region SR3b. The benchmark scenarios used to set exclusion limits are materialized by black dot markers. Acceptance and efficiency are defined as in appendix A of [JHEP 06 (2014) 124, arXiv: 1403.4853v1 [hep-ex]].
Results are reported of a search for new phenomena, such as supersymmetric particle production, that could be observed in high-energy proton--proton collisions. Events with large numbers of jets, together with missing transverse momentum from unobserved particles, are selected. The data analysed were recorded by the ATLAS experiment during 2015 using the 13 TeV centre-of-mass proton--proton collisions at the Large Hadron Collider, and correspond to an integrated luminosity of 3.2 fb$^{-1}$. The search selected events with various jet multiplicities from $\ge 7$ to $\ge 10$ jets, and with various $b$-jet multiplicity requirements to enhance sensitivity. No excess above Standard Model expectations is observed. The results are interpreted within two supersymmetry models, where gluino masses up to 1400 GeV are excluded at 95% confidence level, significantly extending previous limits.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in validation region 7ej50 0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in validation region 6ej80 0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 10j50 0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 10j50 2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 8j80 0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 8j80 2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
Observed 95% CL limit for the pMSSM grid.
Observed 95% CL limit for the pMSSM grid when the signal cross section is increased by one standard deviation.
Observed 95% CL limit for the pMSSM grid when the signal cross section is decreased by one standard deviation.
Expected 95% CL limit for the pMSSM grid.
+1 sigma excursion of the expected 95% CL limit for the pMSSM grid.
-1 sigma excursion of the expected 95% CL limit for the pMSSM grid.
Observed 95% CL limit for the 2Step grid.
Observed 95% CL limit for the 2Step grid when the signal cross section is increased by one standard deviation.
Observed 95% CL limit for the 2Step grid when the signal cross section is decreased by one standard deviation.
Expected 95% CL limit for the 2Step grid.
+1 sigma excursion of the expected 95% CL limit for the 2Step grid.
-1 sigma excursion of the expected 95% CL limit for the 2Step grid.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 8j50 0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 8j50 1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 8j50 2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 9j50 0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 9j50 1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 9j50 2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 10j50 0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 10j50 1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 10j50 2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 7j80 0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 7j80 1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 7j80 2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 8j80 0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 8j80 1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region 8j80 2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
Degree of multijet closure for signal and vaidation regions with at no b-jet requirement. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The bins labelled in bold are signal regions, while the others are validation regions. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Degree of multijet closure for signal and vaidation regions with at least 1 b-jet. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The bins labelled in bold are signal regions, while the others are validation regions. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Degree of multijet closure for signal and vaidation regions with at least 2 b-jets. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The bins labelled in bold are signal regions, while the others are validation regions. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Summary of all 15 signal regions (post-fit).
Signal region yielding the best-expected CLs value, the best expected CLs value, and the corresponding observed CLs value for the 2Step grid.
Signal region yielding the best-expected CLs value, the best expected CLs value, and the corresponding observed CLs value for the pMSSM grid.
95% CLs observed upper limit on model cross-section for 2-step signal points for the best-expected signal region.
Performance of the 8j50-0b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j50-1b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j50-2b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 9j50-0b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 9j50-1b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 9j50-2b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 10j50-0b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 10j50-1b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 10j50-2b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 7j80-0b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 7j80-1b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 7j80-2b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j80-0b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j80-1b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j80-2b selection for the pMSSM grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j50-0b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j50-1b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j50-2b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 9j50-0b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 9j50-1b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 9j50-2b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 10j50-0b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 10j50-1b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 10j50-2b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 7j80-0b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 7j80-1b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 7j80-2b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j80-0b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j80-1b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
Performance of the 8j80-2b selection for the 2Step grid: number of generated signal events; total signal cross-section; acceptance; efficiency (fractional); observed CL using this region alone; expected CL using this region alone.
A summary is presented of ATLAS searches for gluinos and first- and second-generation squarks in final states containing jets and missing transverse momentum, with or without leptons or b-jets, in the $\sqrt{s}$ = 8 TeV data set collected at the Large Hadron Collider in 2012. This paper reports the results of new interpretations and statistical combinations of previously published analyses, as well as a new analysis. Since no significant excess of events over the Standard Model expectation is observed, the data are used to set limits in a variety of models. In all the considered simplified models that assume R-parity conservation, the limit on the gluino mass exceeds 1150 GeV at 95% confidence level, for an LSP mass smaller than 100 GeV. Furthermore, exclusion limits are set for left-handed squarks in a phenomenological MSSM model, a minimal Supergravity/Constrained MSSM model, R-parity-violation scenarios, a minimal gauge-mediated supersymmetry breaking model, a natural gauge mediation model, a non-universal Higgs mass model with gaugino mediation and a minimal model of universal extra dimensions.
Acceptance for the loose channel of the Razor analysis for the direct squark-squark model.
Acceptance times efficiency for the loose channel of the Razor analysis for the direct squark-squark model.
Acceptance for the tight channel of the Razor analysis for the direct squark-squark model.
Acceptance times efficiency for the tight channel of the Razor analysis for the direct squark-squark model.
Acceptance for the 1tau channel of the Taus+jets+MET analysis for the gluino simplified model.
Efficiency for the 1tau channel of the Taus+jets+MET analysis for the gluino simplified model.
Acceptance for the 2tau channel of the Taus+jets+MET analysis for the gluino simplified model.
Efficiency for the 2tau channel of the Taus+jets+MET analysis for the gluino simplified model.
Acceptance for the 1tau channel of the Taus+jets+MET analysis for the squark simplified model.
Efficiency for the 1tau channel of the Taus+jets+MET analysis for the squark simplified model.
Acceptance for the 2tau channel of the Taus+jets+MET analysis for the squark simplified model.
Efficiency for the 2tau channel of the Taus+jets+MET analysis for the squark simplified model.
Observed limit on the cross-section times branching ratio in fb at 95% CL for the direct squark-squark model.
Observed limit on the cross-section times branching ratio in fb at 95% CL for the gluino simplified model, obtained by the Taus+jets+MET analysis.
Observed limit on the cross-section times branching ratio in fb at 95% CL for the squark simplified model, obtained by the Taus+jets+MET analysis.
Observed 95% CL cross section times branching ratio upper limit on pMSSM qLqL production with M1=60 GeV and $m_{\tilde g}=$1.6 TeV interpreted by the 0L analysis including its two dedicated signal regions.
Observed 95% CL cross section times branching ratio upper limit on pMSSM qLqL production with M2=(M1+mqL)/2 and $m_{\tilde g}=$1.6 TeV interpreted by the 0L analysis including its two dedicated signal regions.
Observed 95% CL cross section times branching ratio upper limit on pMSSM qLqL production with M1=60 GeV with $m_{\tilde g}=$2.2 TeV interpreted by the 0L analysis including its two dedicated signal regions.
Observed 95% CL cross section times branching ratio upper limit on pMSSM qLqL production with M2=(M1+mqL)/2 and $m_{\tilde g}=$2.2 TeV interpreted by the 0L analysis including its two dedicated signal regions.
Observed 95% CL cross section times branching ratio upper limit on pMSSM qLqL production with M1=60 GeV and $m_{\tilde g}=$3.0 TeV interpreted by the 0L analysis including its two dedicated signal regions.
Observed 95% CL cross section times branching ratio upper limit on pMSSM qLqL production with M2=(M1+mqL)/2 and $m_{\tilde g}=$3.0 TeV interpreted by the 0L analysis including its two dedicated signal regions.
Observed and expected limits on the cross-section times branching ratio in fb at 95% CL for the gluino-mediated stop model with off-shell stops, for mass points with four- or five-body gluino decays, obtained by the SS/3L and 0/1L3B analyses.
: Cut flow for signal regions 0L_4jt+ and 0L_5jt of baseline signal points normalized to 20.3 fb$^\mathrm{-1}$. The point used for the 0L_4jt+ cutflow is mqL = 1150 GeV, M1 = 60 GeV, M2 = 1000 GeV, m(gluino) = 2200 GeV. The point used for the 0L_5jt cutflow is mqL = 950 GeV, M1 = 100 GeV, M2 = 525 GeV, m(gluino) = 2200 GeV.
Cut flow for the 1L(H)_7-jet SR (electron channel) for the main background from the $t\bar{t}$ production. The events are normalized to 20.3 fb$^\mathrm{-1}$.
Cut flow for the 1L(H)_7-jet SR (muon channel) for the main background from the $t\bar{t}$ production. The events are normalized to 20.3 fb$^\mathrm{-1}$.
Cut flow for 1L(H)_7-jet SR (electron channel). The signal point is taken from the gluino simplified model with 1-step decay via charginos and parameters $m_{\tilde{g}}$ = 1145 GeV, $m_{{\tilde \chi}_{1}^{\pm}}$ = 785 GeV, $m_{\tilde{\chi}_{1}^{0}}$ = 425 GeV; 20000 events were generated for this point. The events are normalized to 20.3 fb$^\mathrm{-1}$.
Cut flow for 1L(H)_7-jet SR (muon channel). The signal point is taken from the gluino simplified model with 1-step decay via charginos and parameters $m_{\tilde{g}}$ = 1145 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 785 GeV, $m_{\tilde{\chi}_{1}^{0}}$ = 425 GeV; 20000 events were generated for this point. The events are normalized to 20.3 fb$^\mathrm{-1}$.
Cut flow for 1L(H)_7-jet SR (electron channel). The signal point is taken from the gluino simplified model with 1-step decay via charginos and parameters $m_{\tilde{g}}$ = 1025 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 545 GeV, $m_{\tilde{\chi}_{1}^{0}}$ = 65 GeV; 20000 events were generated for this point. The events are normalized to 20.3 fb$^\mathrm{-1}$.
Cut flow for 1L(H)_7-jet SR (muon channel). The signal point is taken from the gluino simplified model with 1-step decay via charginos and parameters $m_{\tilde{g}}$ = 1025 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 545 GeV, $m_{\tilde{\chi}_{1}^{0}}$ = 65 GeV; 20000 events were generated for this point. The events are normalized to 20.3 fb$^\mathrm{-1}$.
Cut flow for 0LRaz_SR$_{\rm loose}$ and 0LRaz_SR$_{\rm tight}$ signal regions of baseline signal point ($m(\tilde{q}, \tilde{\chi}_1^0)=(850, 100)$ GeV) normalized to 20.3 fb$^{-1}$. 5000 events were generated for ths point.
Two searches for supersymmetric particles in final states containing a same-flavour opposite-sign lepton pair, jets and large missing transverse momentum are presented. The proton-proton collision data used in these searches were collected at a centre-of-mass energy $\sqrt{s}=8$ TeV by the ATLAS detector at the Large Hadron Collider and corresponds to an integrated luminosity of 20.3 fb$^{-1}$. Two leptonic production mechanisms are considered: decays of squarks and gluinos with $Z$ bosons in the final state, resulting in a peak in the dilepton invariant mass distribution around the $Z$-boson mass; and decays of neutralinos (e.g. $\tilde{\chi}^{0}_{2} \rightarrow \ell^{+}\ell^{-}\tilde{\chi}^{0}_{1}$), resulting in a kinematic endpoint in the dilepton invariant mass distribution. For the former, an excess of events above the expected Standard Model background is observed, with a significance of 3 standard deviations. In the latter case, the data are well-described by the expected Standard Model background. The results from each channel are interpreted in the context of several supersymmetric models involving the production of squarks and gluinos.
The observed and expected dielectron invariant mass distribution in SR-Z. The negigible estimated contribution from Z+jets is omitted in these distributions.
The observed and expected dimuon invariant mass distribution in SR-Z. The negigible estimated contribution from Z+jets is omitted in these distributions.
The observed and expected $E_T^{miss}$ distribution in the dielectron SR-Z. The negigible estimated contribution from Z+jets is omitted in these distributions. The last bin contains the overflow.
The observed and expected $E_T^{miss}$ distribution in the dimuon SR-Z. The negigible estimated contribution from Z+jets is omitted in these distributions. The last bin contains the overflow.
The observed and expected dielectron invariant mass distribution in SR-loose. The last bin contains the overflow.
The observed and expected dimuon invariant mass distribution in SR-loose. The last bin contains the overflow.
The observed and expected dielectron invariant mass distribution in the two-jet $b$-veto SR. The last bin contains the overflow.
The observed and expected dimuon invariant mass distribution in the two-jet $b$-veto SR. The last bin contains the overflow.
The observed and expected dielectron invariant mass distribution in the four jet b-veto SR. The last bin contains the overflow.
The observed and expected dimuon invariant mass distribution in the four-jet $b$-veto SR. The last bin contains the overflow.
The observed and expected dielectron invariant mass distribution in the two-jet $b$-tag SR. The last bin contains the overflow.
The observed and expected dimuon invariant mass distribution in two-jet $b$-tag SR. The last bin contains the overflow.
The observed and expected dielectron invariant mass distribution in the four-jet $b$-tag SR. The last bin contains the overflow.
The observed and expected dimuon invariant mass distribution in the four-jet $b$-tag SR. The last bin contains the overflow.
Expected 95% exclusion contour for the GGM model with $\tan(\beta)=1.5$ in SR-Z.
Observed 95% exclusion contour for the GGM model with $\tan(\beta)=1.5$ in SR-Z.
Expected 95% exclusion contour for the GGM model with $\tan(\beta)=30$ in SR-Z.
Observed 95% exclusion contour for the GGM model with $\tan(\beta)=30$ in SR-Z.
Expected 95% exclusion contour for the two-step first- and second-generation squark simplified model with sleptons in the two-jet $b$-veto SR.
Observed 95% exclusion contour for the two-step first- and second-generation squark simplified model with sleptons in the two-jet $b$-veto SR.
Expected 95% exclusion contour for the two-step gluino simplified model with sleptons in the four-jet $b$-veto SR.
Observed 95% exclusion contour for the two-step gluino simplified model with sleptons in the four-jet $b$-veto SR.
Number of generated events in the two-step gluino simplified model with sleptons.
Production cross-section in the two-step gluino simplified model with sleptons.
Number of generated events in the two-step first- and second-generation squark simplified model with sleptons.
Production cross-section in the two-step first- and second-generation squark simplified model with sleptons.
Number of generated events in the GGM model with $\tan(\beta)=1.5$.
Production cross-section in the GGM model with $\tan(\beta)=1.5$.
Number of generated events in the GGM model with $\tan(\beta)=30$.
Production cross-section in the GGM model with $\tan(\beta)=30$.
Total experimental uncertainty [%] for the two-step gluino simplified model with sleptons.
Total experimental uncertainty [%] for the GGM model with $\tan(\beta)=1.5$.
Total experimental uncertainty for the GGM model with $\tan(\beta)=30$.
Signal acceptance for the GGM model with $\tan(\beta)=1.5$ in the combined electron and muon SR-Z.
Signal acceptance for the GGM model with $\tan(\beta)=30$ in the combined electron and muon SR-Z.
Signal efficiency for the GGM model with $\tan(\beta)=1.5$ in the dielectron SR-Z.
Signal efficiency for the GGM model with $\tan(\beta)=30$ in the dielectron SR-Z.
Signal efficiency for the GGM model with $\tan(\beta)=1.5$ in the dimuon SR-Z.
Signal efficiency for the GGM model with $\tan(\beta)=30$ in the dimuon SR-Z.
Signal efficiency for the GGM model with $\tan(\beta)=1.5$ in the electron and muon combined SR-Z.
Signal efficiency for the GGM model with $\tan(\beta)=30$ in the the electron and muon combined SR-Z.
Signal acceptance for the two-step first- and second-generation squarks simplified model with sleptons in the two-jet $b$-veto SR.
Signal acceptance for the two-step gluino simplified model with sleptons in the four-jet $b$-veto SR.
Signal efficiency for the two-step first- and second-generation squarks simplified model with sleptons in the two-jet $b$-veto SR.
Signal efficiency for the two-step gluino simplified model with sleptons in the four-jet $b$-veto SR.
Upper limits on the signal cross-section at 95% CL for the GGM model with $\tan(\beta)=1.5$.
Observed CL$_{\text{S}}$ for the GGM model with $\tan(\beta)=1.5$.
Expected CL$_{\text{S}}$ for the GGM model with $\tan(\beta)=1.5$.
Upper limits on the signal cross-section at 95% CL for the GGM model with $\tan(\beta)=30$.
Observed CL$_{\text{S}}$ for the GGM model with $\tan(\beta)=30$.
Expected CL$_{\text{S}}$ for the GGM model with $\tan(\beta)=30$.
Upper limits on the signal stength at 95% CL for the two-step first- and second-generation squark simplified model with sleptons. The excluded signal strength is defined as the ratio of the observed excluded production cross section to the expected production cross section calculated at NLO+NLL.
Upper limits on the signal stength at 95% CL for the two-step gluino simplified model with sleptons. The excluded signal strength is defined as the ratio of the observed excluded production cross section to the expected production cross section calculated at NLO+NLL.
Observed CL$_{\text{S}}$ for the two-step first- and second-generation squark simplified model with sleptons.
Expected CL$_{\text{S}}$ for the two-step first- and second-generation squark simplified model with sleptons.
Observed CL$_{\text{S}}$ for the two-step gluino simplified model with sleptons.
Expected CL$_{\text{S}}$ for the two-step gluino simplified model with sleptons.
Cutflow table for three benchmark signal points in SR-Z for the $ee$ and $\mu\mu$ channels separately. The three signal points are taken from the $\tan\beta = 1.5$ grid. 100000 events were generated for each of these points. Shown here are both the unweighted number of events and the number of events normalised to 20.3 fb$^{-1}$. The total experimental systematic uncertainty on the signal yields is indicated at the last cut, along with the corresponding observed and expected $CL_S$ values.
Cutflow table for three benchmark signal points in the two jet b-veto SR of the off-$Z$ search for the $ee$ and $\mu\mu$ channels separately. Shown here are both the unweighted number of events and the number of events normalised to 20.3$^{-1}$. Except for the last two rows indicating the dilepton mass requirements, quoted event yields include all requirements from the top of the table down to the given row.
Cutflow table for three benchmark signal points in the four jet b-veto SR of the off-$Z$ search for the $ee$ and $\mu\mu$ channels separately. Shown here are both the unweighted number of events and the number of events normalised to 20.3 fb$^{-1}$. Except for the last two rows indicating the dilepton mass requirements, quoted event yields include all requirements from the top of the table down to the given row.
A search for high-mass resonances decaying into $\tau^{+}\tau^{-}$ final states using proton-proton collisions at $\sqrt{s}= 8$ TeV produced by the Large Hadron Collider is presented. The data were recorded with the ATLAS detector and correspond to an integrated luminosity of 19.5-20.3 fb$^{-1}$. No statistically significant excess above the Standard Model expectation is observed; 95% credibility upper limits are set on the cross section times branching fraction of $Z^{\prime}$ resonances decaying into $\tau^+\tau^-$ pairs as a function of the resonance mass. As a result, $Z^{\prime}$ bosons of the Sequential Standard Model with masses less than 2.02 TeV are excluded at 95% credibility. The impact of the fermionic couplings on the $Z^{\prime}$ acceptance is investigated and limits are also placed on a $Z^{\prime}$ model that exhibits enhanced couplings to third-generation fermions.
Signal acceptance times efficiency (ACC*EFF) for Z'L, Z'R, Z'narrow and Z'wide divided by ACC*EFF for Z'SSM as a function of the Z' mass, separately for the had-had and lep-had channels.
Ratio of the Z'NU to Z'SSM cross section times tau+tau- branching fraction (SIG*BR) as a function of sin^2phi and the Z' mass.
Ratio of the Z'NU to Z'SSM acceptance times efficiency (ACC*EFF) in the had-had channel as a function of sin^2phi and the Z' mass.
Ratio of the Z'NU to Z'SSM acceptance times efficiency (ACC*EFF) in the lep-had channel as a function of sin^2phi and the Z' mass.
Z' SSM acceptance (ACC) and product of acceptance and efficiency (ACC*EFF) for the had-had and lep-had selections as a function of the Z' mass.
Number of expected Z'SSM signal (NS), background (NB) and observed (N) events passing the total transverse mass ($m_{\rm T}^{\rm tot}$) threshold in the had-had and lep-had channels.
Median expected and observed 95% CL upper limits on the cross-section times branching fraction to tau+tau- for Z'SSM production for the exclusive had-had and lep-had channels, and for both channels combined.
Observed 95% CL upper limits on the cross-section times branching fraction to tau+tau- for Z'L and Z'R production for the combination of the had-had and lep-had channels.
Observed 95% CL lower limit on the Z'NU mass as a function of sin^2(phi).
A search is presented for the direct pair production of a chargino and a neutralino $pp\to\tilde{\chi}^\pm_1\tilde{\chi}^0_2$, where the chargino decays to the lightest neutralino and the $W$ boson, $\tilde{\chi}^\pm_1 \to \tilde{\chi}^0_1 (W^{\pm}\to\ell^{\pm}\nu)$, while the neutralino decays to the lightest neutralino and the 125 GeV Higgs boson, $\tilde{\chi}^0_2 \to \tilde{\chi}^0_1 (h\to bb/\gamma\gamma/\ell^{\pm}\nu qq)$. The final states considered for the search have large missing transverse momentum, an isolated electron or muon, and one of the following: either two jets identified as originating from bottom quarks, or two photons, or a second electron or muon with the same electric charge. The analysis is based on 20.3 fb$^{-1}$ of $\sqrt{s}=8$ TeV proton-proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with the Standard Model expectations, and limits are set in the context of a simplified supersymmetric model.
Distribution of contransverse mass $m_{\rm CT}$ in CRlbb-T, central $m_{bb}$ bin. The background histograms are obtained from the background-only fit, and their uncertainty represents the total background uncertainty after the fit. The last bin includes overflow.
Distribution of contransverse mass $m_{\rm CT}$ in SRlbb-1 and SRlbb-2, $m_{bb}$ sideband. The background histograms are obtained from the background-only fit, and their uncertainty represents the total background uncertainty after the fit. The last bin includes overflow.
Distribution of the transverse mass of the $W$-candidate $m_{\rm T}^{W}$ for the one lepton and two $b$-jets channel in VRlbb-2, central $m_{bb}$ bin. The background histograms are obtained from the background-only fit, and their uncertainty represents the total background uncertainty after the fit. The last bin includes overflow.
Distribution of the transverse mass of the $W$-candidate $m_{\rm T}^{W}$ for the one lepton and two $b$-jets channel in SRlbb-1 and SRlbb-2, $m_{bb}$ sidebands. The background histograms are obtained from the background-only fit, and their uncertainty represents the total background uncertainty after the fit. The last bin includes overflow.
Distribution of the number of $b$-jets for the one lepton and two $b$-jets channel in SRlbb-1 and SRlbb-2 without the b-jet multiplicity requirement, central $m_{bb}$ bin. The background histograms are obtained from the background-only fit, and their uncertainty represents the total background uncertainty after the fit.
Distribution of the invariant mass of the $b$-jets $m_{bb}$ for the one lepton and two $b$-jets channel in the SRlbb-1 and SRlbb-2. The background histograms are obtained from the background-only fit, and their uncertainty represents the total background uncertainty after the fit.
Distribution of missing transverse momentum $E_{\rm T}^{\rm miss}$ in the one lepton and two photons signal regions SR$\ell\gamma\gamma$-1 and SR$\ell\gamma\gamma$-2 for the Higgs-mass window ($120\lt m_{\gamma\gamma} \lt 130$ GeV). The final column (background) is a simulation-based cross check. The contributions from non-Higgs backgrounds are scaled by 10 GeV / 50 GeV = 0.2 from the $m_{\gamma\gamma}$ sideband ($100 \lt m_{\gamma\gamma} \lt 120$ GeV and $130 \lt m_{\gamma\gamma} \lt 160$ GeV) into the Higgs-mass window. The last bin includes overflow. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(165,35)$ GeV.
Distribution of the azimuth difference between the $W$ and Higgs boson candidates $\Delta\phi(W,h)$ in the one lepton and two photons signal regions SR$\ell\gamma\gamma$-1 and SR$\ell\gamma\gamma$-2 for the Higgs-mass window ($120\lt m_{\gamma\gamma} \lt 130$ GeV). The final column (background) is a simulation-based cross check. The contributions from non-Higgs backgrounds are scaled by 10 GeV / 50 GeV = 0.2 from the $m_{\gamma\gamma}$ sideband ($100 \lt m_{\gamma\gamma} \lt 120$ GeV and $130 \lt m_{\gamma\gamma} \lt 160$ GeV) into the Higgs-mass window. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(165,35)$ GeV.
Distribution of the transverse mass of the $W$ and photon system $m_{\rm{T}}^{W\gamma_1}$ in the one lepton and two photons signal regions SR$\ell\gamma\gamma$-1 and SR$\ell\gamma\gamma$-2 for the Higgs-mass window ($120\lt m_{\gamma\gamma} \lt 130$ GeV). The final column (background) is a simulation-based cross check. The contributions from non-Higgs backgrounds are scaled by 10 GeV / 50 GeV = 0.2 from the $m_{\gamma\gamma}$ sideband ($100 \lt m_{\gamma\gamma} \lt 120$ GeV and $130 \lt m_{\gamma\gamma} \lt 160$ GeV) into the Higgs-mass window. The last bin includes overflow. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(165,35)$ GeV.
Distribution of the transverse mass of the $W$ and photon system $m_{\rm{T}}^{W\gamma_2}$ in the one lepton and two photons signal regions SR$\ell\gamma\gamma$-1 and SR$\ell\gamma\gamma$-2 for the Higgs-mass window ($120\lt m_{\gamma\gamma} \lt 130$ GeV). The final column (background) is a simulation-based cross check. The contributions from non-Higgs backgrounds are scaled by 10 GeV / 50 GeV = 0.2 from the $m_{\gamma\gamma}$ sideband ($100 \lt m_{\gamma\gamma} \lt 120$ GeV and $130 \lt m_{\gamma\gamma} \lt 160$ GeV) into the Higgs-mass window. The last bin includes overflow. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(165,35)$ GeV.
Results of the background-only fit to the diphoton invariant mass, $m_{\gamma\gamma}$, distribution in the one lepton and two photons signal region SR$l\gamma\gamma$-1. The contributions from SM Higgs boson production are constrained to the MC prediction and associated systematic uncertainties. The fit is performed on events with 100 GeV $ \lt m_{\gamma\gamma} \lt $ 160 GeV, with events in SR$l\gamma\gamma$-1 or SR$l\gamma\gamma$-2 in the Higgs-mass window (120 GeV $\le m_{\gamma\gamma} \le$ 130 GeV) excluded from the fit.
Results of the background-only fit to the diphoton invariant mass, $m_{\gamma\gamma}$, distribution in the one lepton and two photons signal region SR$l\gamma\gamma$-2. The contributions from SM Higgs boson production are constrained to the MC prediction and associated systematic uncertainties. The fit is performed on events with 100 GeV $ \lt m_{\gamma\gamma} \lt $ 160 GeV, with events in SR$l\gamma\gamma$-1 or SR$l\gamma\gamma$-2 in the Higgs-mass window (120 GeV $\le m_{\gamma\gamma} \le$ 130 GeV) excluded from the fit.
Results of the background-only fit to the diphoton invariant mass, $m_{\gamma\gamma}$, distribution in the one lepton and two photons validation region VR$l\gamma\gamma$-1. The contributions from SM Higgs boson production are constrained to the MC prediction and associated systematic uncertainties. The fit is performed on events with 100 GeV $ \lt m_{\gamma\gamma} \lt $ 160 GeV, with events in SR$l\gamma\gamma$-1 or SR$l\gamma\gamma$-2 in the Higgs-mass window (120 GeV $\le m_{\gamma\gamma} \le$ 130 GeV) excluded from the fit.
Results of the background-only fit to the diphoton invariant mass, $m_{\gamma\gamma}$, distribution in the one lepton and two photons validation region VR$l\gamma\gamma$-2. The contributions from SM Higgs boson production are constrained to the MC prediction and associated systematic uncertainties. The fit is performed on events with 100 GeV $ \lt m_{\gamma\gamma} \lt $ 160 GeV, with events in SR$l\gamma\gamma$-1 or SR$l\gamma\gamma$-2 in the Higgs-mass window (120 GeV $\le m_{\gamma\gamma} \le$ 130 GeV) excluded from the fit.
Distribution of effective mass $m_{\rm eff}$ in the validation region of the same-sign $e\mu$ channel. This validation region is defined by requiring one, two, or three jets, and reversing the $m_{lj}$, $m_{ljj}$ criteria. The distribution of a signal hypothesis is also shown.
Distribution of effective mass $m_{\rm eff}$ for the same-sign dilepton channel in the signal regions with one jet SR$ll$-1. SR$ll$-1 is the sum of SR$ee$-1, SR$e\mu$-1, and SR$\mu\mu$-1. All selection criteria are applied, except for the one on $m_{\rm eff}$. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(130,0)$ GeV. The last bin includes overflow.
Distribution of effective mass $m_{\rm eff}$ for the same-sign dilepton channel in the signal regions with two or three jets SR$ll$-2. SR$ll$-2 is the sum of SR$ee$-2, SR$e\mu$-2, and SR$\mu\mu$-2. All selection criteria are applied, except for the one on $m_{\rm eff}$. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(130,0)$ GeV. The last bin includes overflow.
Distribution of largest transverse mass $m_{\rm T}^{\rm max}$ for the same-sign dilepton channel in the signal regions with one jet SR$ll$-1. SR$ll$-1 is the sum of SR$ee$-1, SR$e\mu$-1, and SR$\mu\mu$-1. All selection criteria are applied, except for the one on $m_{\rm T}^{\rm max}$. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(130,0)$ GeV. The last bin includes overflow.
Distribution of largest transverse mass $m_{\rm T}^{\rm max}$ for the same-sign dilepton channel in the signal regions with two or three jets SR$ll$-2. SR$ll$-2 is the sum of SR$ee$-2, SR$e\mu$-2, and SR$\mu\mu$-2. All selection criteria are applied, except for the one on $m_{\rm T}^{\rm max}$. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(130,0)$ GeV. The last bin includes overflow.
Distribution of invariant mass of lepton and jet $m_{lj}$ for the same-sign dilepton channel in the signal regions with one jet SR$ll$-1. SR$ll$-1 is the sum of SR$ee$-1, SR$e\mu$-1, and SR$\mu\mu$-1. All selection criteria are applied, except for the one on $m_{lj}$. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(130,0)$ GeV. The last bin includes overflow.
Distribution of invariant mass of lepton and di-jet $m_{ljj}$ for the same-sign dilepton channel in the signal regions with two or three jets SR$ll$-2. SR$ll$-2 is the sum of SR$ee$-2, SR$e\mu$-2, and SR$\mu\mu$-2. All selection criteria are applied, except for the one on $m_{ljj}$. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(130,0)$ GeV. The last bin includes overflow.
One lepton and two $b$-jets channel: observed and expected 95% CL upper limits on the cross section normalised by the simplified model prediction as a function of the common mass $m_{\tilde{\chi}_1^\pm \tilde{\chi}^0_2}$ for $m_{\tilde{\chi}^0_1}=0$.
One lepton and two photons channel: observed and expected 95% CL upper limits on the cross section normalised by the simplified model prediction as a function of the common mass $m_{\tilde{\chi}_1^\pm \tilde{\chi}^0_2}$ for $m_{\tilde{\chi}^0_1}=0$.
Same-sign dilepton channel: observed and expected 95% CL upper limits on the cross section normalised by the simplified model prediction as a function of the common mass $m_{\tilde{\chi}_1^\pm \tilde{\chi}^0_2}$ for $m_{\tilde{\chi}^0_1}=0$.
Combination: observed and expected 95% CL upper limits on the cross section normalised by the simplified model prediction as a function of the common mass $m_{\tilde{\chi}_1^\pm \tilde{\chi}^0_2}$ for $m_{\tilde{\chi}^0_1}=0$. This combination is obtained using the result from the ATLAS three-lepton search, J. High Energy Phys. 04 (2014) 169, in addition to the three channels reported in this paper.
One lepton and two b-jets channel: Expected 95% CL exclusion contour for chargino neutralino production via Wh.
One lepton and two b-jets channel: Observed 95% CL exclusion contour for chargino neutralino production via Wh.
One lepton and two photons channel: Expected 95% CL exclusion contour for chargino neutralino production via Wh.
One lepton and two photons channel: Observed 95% CL exclusion contour for chargino neutralino production via Wh.
Same-sign dilepton channel: Expected 95% CL exclusion contour for chargino neutralino production via Wh.
Same-sign dilepton channel: Observed 95% CL exclusion contour for chargino neutralino production via Wh.
Combination: Expected 95% CL exclusion contour for chargino neutralino production via Wh.
Combination: Observed 95% CL exclusion contour for chargino neutralino production via Wh.
Combination: excluded model cross-section at 95% CL IN PB.
Acceptance SR$\ell\gamma\gamma$-1.
Acceptance SR$\ell\gamma\gamma$-2.
Efficiency SR$\ell\gamma\gamma$-1.
Efficiency SR$\ell\gamma\gamma$-2.
$m_{\gamma\gamma}$ distribution in the SR$l\gamma\gamma$-1 region for the full $m_{\gamma\gamma}$ window. The last column (background) is from a simulation-based cross check. $Z\gamma$ events, with $Z\rightarrow{ee}$ and one electron mis-identified as a photon, are included in the $Z\gamma(\gamma)$ background. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(165,35)$ GeV.
$m_{\gamma\gamma}$ distribution in the SR$l\gamma\gamma$-2 region for the full $m_{\gamma\gamma}$ window. The last column (background) is from a simulation-based cross check. $Z\gamma$ events, with $Z\rightarrow{ee}$ and one electron mis-identified as a photon, are included in the $Z\gamma(\gamma)$ background. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(165,35)$ GeV.
$m_{\gamma\gamma}$ distribution in the VR$l\gamma\gamma$-1 region for the full $m_{\gamma\gamma}$ window. The last column (background) is from a simulation-based cross check. $Z\gamma$ events, with $Z\rightarrow{ee}$ and one electron mis-identified as a photon, are included in the $Z\gamma(\gamma)$ background. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(165,35)$ GeV.
$m_{\gamma\gamma}$ distribution in the VR$l\gamma\gamma$-2 region for the full $m_{\gamma\gamma}$ window. The last column (background) is from a simulation-based cross check. $Z\gamma$ events, with $Z\rightarrow{ee}$ and one electron mis-identified as a photon, are included in the $Z\gamma(\gamma)$ background. The distributions of a signal hypothesis are also shown for $m(\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2},\tilde{\chi}^{0}_{1})=(165,35)$ GeV.
Acceptance for SRlbb-1, central $m_{bb}$ bin.
Acceptance for SRlbb-1, $m_{bb}$ sideband.
Acceptance for SRlbb-2, central $m_{bb}$ bin.
Acceptance for SRlbb-2, $m_{bb}$ sideband.
Efficiency for SRlbb-1, central $m_{bb}$ bin.
Efficiency for SRlbb-1, $m_{bb}$ sideband.
Efficiency for SRlbb-2, central $m_{bb}$ bin.
Efficiency for SRlbb-2, $m_{bb}$ sideband.
Acceptance for the same-sign $ee$ channel with one jet.
Acceptance for the same-sign $ee$ channel with two or three jets.
Acceptance for the same-sign $e\mu$ channel with one jet.
Acceptance for the same-sign $e\mu$ channel with two or three jets.
Acceptance for the same-sign $\mu\mu$ channel with one jet.
Acceptance for the same-sign $\mu\mu$ channel with two or three jets.
Efficiency for the same-sign $ee$ channel with one jet.
Efficiency for the same-sign $ee$ channel with two or three jets.
Efficiency for the same-sign $e\mu$ channel with one jet.
Efficiency for the same-sign $e\mu$ channel with two or three jets.
Efficiency for the same-sign $\mu\mu$ channel with one jet.
Efficiency for the same-sign $\mu\mu$ channel with two or three jets.
The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider (LHC) are reported. The search is based on proton-proton collision data at a centre-of-mass energy $\sqrt{s} = 8$ TeV collected in 2012, corresponding to an integrated luminosity of 20 fb$^{-1}$. No significant excess above the Standard Model expectation is observed. Limits are set on the parameters of a minimal universal extra dimensions model, excluding a compactification radius of $1/R_c=950$ GeV for a cut-off scale times radius ($\Lambda R_c$) of approximately 30, as well as on sparticle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV.
Observed and expected $E_T^{miss}/m_{eff}$ distribution in soft single-lepton 3-jet signal region. The last bin includes the overflow.
Observed and expected $E_T^{miss}/m_{eff}$ distribution in soft single-lepton 5-jet signal region. The last bin includes the overflow.
Observed and expected $E_T^{miss}/m_{eff}$ distribution in soft single-lepton 3-jet inclusive signal region. The last bin includes the overflow.
Observed and expected $E_T^{miss}$ distribution in soft dimuon signal region. The last bin includes the overflow.
Observed and expected $m_{eff}^{incl}$ distribution in hard single-lepton 3-jet signal region. The last bin includes the overflow.
Observed and expected $m_{eff}^{incl}$ distribution for hard single-lepton 5-jet signal region. The last bin includes the overflow.
Observed and expected $E_{T}^{miss}$ distribution for hard single-lepton 6-jet signal region. The last bin includes the overflow.
Observed and expected $M_{R}'$ distribution for hard same-flavour dilepton low-multiplicity signal region. The last bin includes the overflow.
Observed and expected $M_{R}'$ distribution for hard same-flavour dilepton 3-jet signal region. The last bin includes the overflow.
Observed and expected $M_{R}'$ distribution for hard opposite-flavour dilepton low-multiplicity signal region. The last bin includes the overflow.
Observed and expected $M_{R}'$ distribution for hard opposite-flavour dilepton 3-jet opposite-flavour signal region. The last bin includes the overflow.
Observed 95% exclusion contour for the mSUGRA/CMSSM model with $\tan\beta=30$, $A_{0}=-2m_{0}$ and $\mu > 0$.
Expected 95% exclusion contour for the mSUGRA/CMSSM model with $\tan\beta=30$, $A_{0}=-2m_{0}$ and $\mu > 0$.
Observed 95% exclusion contour for the bRPV MSUGRA/CMSSM model.
Expected 95% exclusion contour for the bRPV MSUGRA/CMSSM model.
Observed 95% exclusion contour for the natural gauge mediation with a stau NLSP model (nGM).
Expected 95% exclusion contour for the natural gauge mediation with a stau NLSP model (nGM).
Observed 95% exclusion contour for the non-universal higgs masses with gaugino mediation model (NUHMG).
Expected 95% exclusion contour for the non-universal higgs masses with gaugino mediation model (NUHMG).
Observed 95% exclusion contour for the minimal UED model from the combination of the hard dilepton and soft dilepton analyses.
Expected 95% exclusion contour for the minimal UED model from the combination of the hard dilepton and soft dilepton analyses.
Observed 95% exclusion contour for the minimal UED model from the hard dilepton analysis.
Expected 95% exclusion contour for the minimal UED model from the hard dilepton analysis.
Observed 95% exclusion contour for the minimal UED model from the soft dilepton analysis.
Expected 95% exclusion contour for the minimal UED model from the soft dilepton analysis.
Observed 95% exclusion contour for the simplified model with gluino-mediated top squark production where the top squark is assumed to decay exclusively via $\tilde{t} \rightarrow c \tilde{\chi}^{0}_{1}$.
Expected 95% exclusion contour for the simplified model with gluino-mediated top squark production, where the top squark is assumed to decay exclusively via $\tilde{t} \rightarrow c \tilde{\chi}^{0}_{1}$.
Observed 95% exclusion contour for the simplified model with gluino-mediated top squark production where the gluinos are assumed to decay exclusively through a virtual top squark, $\tilde{g} \rightarrow tt+\tilde{\chi}^{0}_{1}$.
Expected 95% exclusion contour for the simplified model with gluino-mediated top squark production where the gluinos are assumed to decay exclusively through a virtual top squark, $\tilde{g} \rightarrow tt+\tilde{\chi}^{0}_{1}$.
Observed 95% exclusion contour for the gluino simplified model from the combination of the soft single-lepton and hard single-lepton analyses for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Expected 95% exclusion contour for the gluino simplified model from the combination of the soft single-lepton and hard single-lepton analyses for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Observed 95% exclusion contour for the gluino simplified model from the hard single-lepton analyses for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Expected 95% exclusion contour for the gluino simplified model from the hard single-lepton analyses for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Observed 95% exclusion contour for the gluino simplified model from the soft single-lepton analyses for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Expected 95% exclusion contour for the gluino simplified model from the soft single-lepton analyses for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Observed 95% exclusion contour for the the first- and second-generation squark simplified model from the combination of the soft single-lepton and hard single-lepton analyses for the case in which the chargino mass is fixed at x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) = 1/2.
Expected 95% exclusion contour for the the first- and second-generation squark simplified model from the combination of the soft single-lepton and hard single-lepton analyses for the case in which the chargino mass is fixed at x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) = 1/2.
Observed 95% exclusion contour for the the first- and second-generation squark simplified model from the hard single-lepton analysis for the case in which the chargino mass is fixed at x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) = 1/2.
Expected 95% exclusion contour for the the first- and second-generation squark simplified model from the hard single-lepton analysis for the case in which the chargino mass is fixed at x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) = 1/2.
Observed 95% exclusion contour for the the first- and second-generation squark simplified model from the soft single-lepton analysis for the case in which the chargino mass is fixed at x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) = 1/2.
Expected 95% exclusion contour for the the first- and second-generation squark simplified model from the soft single-lepton analysis for the case in which the chargino mass is fixed at x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) = 1/2.
Observed 95% exclusion contour for the gluino simplified model from the combination of the soft single-lepton and hard single-lepton analyses for the case in which x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Expected 95% exclusion contour for the gluino simplified model from the combination of the soft single-lepton and hard single-lepton analyses for the case in which x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Observed 95% exclusion contour for the gluino simplified model from the hard single-lepton analysis for the case in which x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Expected 95% exclusion contour for the gluino simplified model from the hard single-lepton analysis for the case in which x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Observed 95% exclusion contour for the gluino simplified model from the soft single-lepton analysis for the case in which x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Expected 95% exclusion contour for the gluino simplified model from the soft single-lepton analysis for the case in which x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Observed 95% exclusion contour for the first- and second-generation squark simplified model from the combination of the soft single-lepton and hard single-lepton analyses for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Expected 95% exclusion contour for the first- and second-generation squark simplified model from the combination of soft single-lepton and hard single-lepton analyses for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Observed 95% exclusion contour for the first- and second-generation squark simplified model from the hard single-lepton analyses for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Expected 95% exclusion contour for the first- and second-generation squark simplified model from the hard single-lepton analyses for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Observed 95% exclusion contour for the first- and second-generation squark simplified model from the soft single-lepton analyses for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Expected 95% exclusion contour for the first- and second-generation squark simplified model from the soft single-lepton analyses for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Observed 95% exclusion contour for the two-step gluino simplified model with sleptons from the combination of the hard dilepton and hard single-lepton analyses.
Expected 95% exclusion contour for the two-step gluino simplified model with sleptons from the combination of the hard dilepton and hard single-lepton analyses.
Observed 95% exclusion contour for the two-step gluino simplified model with sleptons from the hard single-lepton analysis.
Expected 95% exclusion contour for the two-step gluino simplified model with sleptons from the hard single-lepton analysis.
Observed 95% exclusion contour for the two-step gluino simplified model with sleptons from the hard dilepton analysis.
Expected 95% exclusion contour for the two-step gluino simplified model with sleptons from the hard dilepton analysis.
Observed 95% exclusion contour for the two-step first- and second-generation squark simplified model with sleptons from the hard dilepton analysis.
Expected 95% exclusion contour for the two-step first- and second-generation squark simplified model with sleptons from the hard dilepton analysis.
Observed 95% exclusion contour for the two-step gluino simplified model without sleptons from the hard single-lepton analysis.
Expected 95% exclusion contour for the two-step gluino simplified model without sleptons from the hard single-lepton analysis.
Number of generated events in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Production cross-section in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Number of generated events in the the first- and second-generation squark simplified model for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV. squark decaying to quark neutralino1 with varying x.
Production cross-section in the the first- and second-generation squark simplified model for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Number of generated evens in the minimal UED model.
Production cross-section in the minimal UED model in pb.
Number of generated events in the two-step first- and second-generation squark simplified model with sleptons.
Production cross-section in the two-step first- and second-generation squark simplified model with sleptons.
Acceptance for soft single-lepton 3-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Efficiency for soft single-lepton 3-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Acceptance for soft single-lepton 5-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Efficiency for soft single-lepton 5-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Acceptance for soft single-lepton 3-jet inclusive signal region in the gluino simplified model for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Efficiency for the soft single-lepton 3-jet inclusive signal region in the gluino simplified model for the case in x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Expected CLs from the combination of the soft single-lepton and hard single-lepton analyses in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Expected CLs from the combination of the soft single-lepton and hard single-lepton analyses in the gluino simplified model for the case in which the chargino mass is varied and the LSP mass is set at 60 GeV. The chargino mass is parameterised using x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)).
Observed CLs from the combination of the soft single-lepton and hard single-lepton analyses in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Observed CLs from the combination of the soft single-lepton and hard single-lepton analyses in the gluino simplified model for the case in which the chargino mass is varied and the LSP mass is set at 60 GeV. The chargino mass is parameterised using x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)).
Acceptance for soft dimuon signal region in the minimal UED model (mUED).
Efficiency for soft dimuon signal region in minimal UED model (mUED).
Acceptance for hard dilepton 3-jet opposite-flavour signal region in the two-step first- and second-generation squark simplified model with sleptons.
Efficiency for hard dilepton 3jet opposite-flavour signal region in the two-step first- and second-generation squark simplified model with sleptons.
Acceptance for hard dilepton 3-jet same-flavour signal region in the two-step first- and second-generation squark simplified model with sleptons.
Efficiency for hard dilepton 3-jet same-flavour signal region in the two-step first- and second-generation squark simplified model with sleptons.
Acceptance for hard dilepton low-multiplicity opposite-flavour signal region in the two-step first- and second-generation squark simplified model with sleptons.
Efficiency for hard dilepton low-multiplicity opposite-flavour signal region in the two-step first- and second-generation squark simplified model with sleptons.
Acceptance for hard dilepton low-multiplicity same-flavour signal region in the two-step first- and second-generation squark simplified model with sleptons.
Efficiency for hard dilepton low-multiplicity same-flavour signal region in the two-step first- and second-generation squark simplified model with sleptons.
Best expected signal region in the minimal UED model (mUED).
Expected CLs from hard dilepton analysis in the two-step first- and second-generation squark simplified model with sleptons.
Observed CLs from the hard dilepton analysis in the two-step first- and second-generation squark simplified model with sleptons.
Expected CLs from the combination of the soft dimuon and hard dilepton analyses in the minimal UED model (mUED).
Observed CLs from the combination of the soft dimuon and hard dilepton analyses in the minimal UED model (mUED).
Acceptance for hard single-lepton 3-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Efficiency for hard single-lepton 3-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Acceptance for hard single-lepton 5-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Efficiency for hard single-lepton 5-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Acceptance for hard single-lepton 6-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Efficiency for hard single-lepton 6-jet signal region in the gluino simplified model for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Acceptance for hard single-lepton 3-jet signal region in the first- and second-generation squark simplified model for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Efficiency for hard single-lepton 3-jet signal region in the first- and second-generation squark simplified model for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Acceptance for hard single-lepton 5-jet signal region in the first- and second-generation squark simplified model for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Efficiency for hard single-lepton 5-jet signal region in the first- and second-generation squark simplified model for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Acceptance for hard single-lepton 6-jet signal region in the first- and second-generation squark simplified model for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Efficiency for hard single-lepton 6-jet signal region in the first- and second-generation squark simplified model for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Observed 95% upper limit on the visible cross-section in the gluino simplified model from the combination of the soft single-lepton and hard single-lepton analyses for the case in which the chargino mass is fixed at x = (m(gluino)-m(chargino))/(m(gluino)-m(LSP)) = 1/2.
Observed 95% upper limit on the visible cross-section in the first- and second-generation squark simplified model from the combination of the soft single-lepton and hard single-lepton analyses for the case in which x = (m(squark)-m(chargino))/(m(squark)-m(LSP)) is varied and the LSP mass is set at 60 GeV.
Observed 95% upper limit on the visible cross-section in the first- and second-generation squark simplified model with sleptons from the hard dilepton analysis.
Observed 95% upper limit on the visible cross-section in the minimal UED model (mUED) from the combination of the soft dimuon and hard dilepton analyses.
A search for a massive $W'$ gauge boson decaying to a top quark and a bottom quark is performed with the ATLAS detector in $pp$ collisions at the LHC. The dataset was taken at a centre-of-mass energy of $\sqrt{s} = 8$ TeV and corresponds to 20.3 fb$^{-1}$ of integrated luminosity. This analysis is done in the hadronic decay mode of the top quark, where novel jet substructure techniques are used to identify jets from high-momentum top quarks. This allows for a search for high-mass $W'$ bosons in the range $1.5 - 3.0$ TeV. $b$-tagging is used to identify jets originating from $b$-quarks. The data are consistent with Standard Model background-only expectations, and upper limits at 95% confidence level are set on the $W' \rightarrow tb$ cross section times branching ratio ranging from $0.16$ pb to $0.33$ pb for left-handed $W'$ bosons, and ranging from $0.10$ pb to $0.21$ pb for $W'$ bosons with purely right-handed couplings. Upper limits at 95% confidence level are set on the $W'$-boson coupling to $tb$ as a function of the $W'$ mass using an effective field theory approach, which is independent of details of particular models predicting a $W'$ boson.
m_tb distributions in data in the one b-tag and the two b-tag category, together with background-only fits excluding the region 4-5 TeV which is beyond the range considered for this analysis. Potential WPRIME_L signal shapes in the hadronic top-quark decay channel with gPRIME = gSM are also given for resonance masses of 1.5, 2.0, 2.5 and 3.0 TeV.
Limits at 95% CL on the cross section times branching ratio to TOP BOTTOM for the left-handed and for the right-handed WPRIME model. The expected cross section for WPRIME production with gprime = gSM is also shown.
Observed and expected 95% CL limits on the ratio of coupling gWPRIME_L/gSM (gWPRIME_R/gSM) of the WPRIME_L (WPRIME_R) model as a function of the WPRIME mass.
Selection acceptance times efficiency as a function of WPRIME mass at truth level for left- and right-handed WPRIME MC. The total efficiency curves correspond to the sum of the efficiencies of the one b-tag and two b-tag categories.
Cutflow (efficiency with respect to total number of events in %) for several WPRIME masses in the left-handed and in the right-handed model for hadronic top-quark decays.
Overview of the signal acceptance times efficiency (A x Eff) for the hadronic top-quark decay for both categories, the predicted cross section times branching ratio to TOP BOTTOM, as well as the observed 95% CL limit on the cross section times branching ratio for several WPRIME masses in the left-handed and in the right-handed model. The expected signal event yields in the two categories for 20.3 fb-1 of 8 TeV data are also shown.
The results of a search for top squark (stop) pair production in final states with one isolated lepton, jets, and missing transverse momentum are reported. The analysis is performed with proton--proton collision data at $\sqrt{s} = 8$ TeV collected with the ATLAS detector at the LHC in 2012 corresponding to an integrated luminosity of $20$ fb$^{-1}$. The lightest supersymmetric particle (LSP) is taken to be the lightest neutralino which only interacts weakly and is assumed to be stable. The stop decay modes considered are those to a top quark and the LSP as well as to a bottom quark and the lightest chargino, where the chargino decays to the LSP by emitting a $W$ boson. A wide range of scenarios with different mass splittings between the stop, the lightest neutralino and the lightest chargino are considered, including cases where the $W$ bosons or the top quarks are off-shell. Decay modes involving the heavier charginos and neutralinos are addressed using a set of phenomenological models of supersymmetry. No significant excess over the Standard Model prediction is observed. A stop with a mass between $210$ and $640$ GeV decaying directly to a top quark and a massless LSP is excluded at $95$ % confidence level, and in models where the mass of the lightest chargino is twice that of the LSP, stops are excluded at $95$ % confidence level up to a mass of $500$ GeV for an LSP mass in the range of $100$ to $150$ GeV. Stringent exclusion limits are also derived for all other stop decay modes considered, and model-independent upper limits are set on the visible cross-section for processes beyond the Standard Model.
Expected and observed $H_{T,sig}^{miss}$ distribution for tN_med SR, before applying the $H_{T,sig}^{miss}>12$ requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed large-R jet mass distribution for tN_boost SR, before applying the large-R jet mass$>75$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed b-jet multiplicity distribution for bCc_diag SR, before applying the b-jet multiplicity$=0$ requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed $am_{T2}$ distribution for bCd_high1 SR, before applying the $am_{T2}>200$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed leading b-jet $p_T$ distribution for bCd_high2 SR, before applying the leading b-jet $p_T>170$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed $E_T^{miss}$ distribution for tNbC_mix SR, before applying the $E_T^{miss}>270$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed lepton $p_T$ distribution for bCa_low SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed lepton $p_T$ distribution for bCa_med SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed $am_T2$ distribution for bCb_med1 SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed $am_T2$ distribution for bCb_high SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Best expected signal region for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$). This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$). This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV. This mapping is used for the final combined exclusion limits.
Upper limits on the model cross-section for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Observed exclusion contour for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Expected exclusion contour for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Upper limit on signal events for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$).
Observed exclusion contour for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$).
Expected exclusion contour for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$).
Upper limit on signal events for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$).
Observed exclusion contour for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$).
Expected exclusion contour for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$).
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV.
Acceptance of tN_diag SR ($E_T^{miss}>150$ GeV, $m_T>140$ GeV) for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCb_med2 SR ($am_{T2}>250$ GeV, $m_T>60$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCd_bulk SR ($am_{T2}>175$ GeV, $m_T>120$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCa_med for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCa_low for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCb_med1 for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCb_high for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of 3-body SR ($80<am_{T2}<90$ GeV, $m_T>120$ GeV) for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$). The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of tNbC_mix SR for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Efficiency of tN_diag SR ($E_T^{miss}>150$ GeV, $m_T>140$ GeV) for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCb_med2 SR ($am_{T2}>250$ GeV, $m_T>60$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCd_bulk SR ($am_{T2}>175$ GeV, $m_T>120$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCa_med for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCa_low for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCb_med1 for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCb_high for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of 3-body SR ($80<am_{T2}<90$ GeV, $m_T>120$ GeV) for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$). The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of tNbC_mix SR for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Number of generated events for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Number of generated events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Number of generated events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV; $E_T^{miss}$(gen)$>60$ GeV.
Number of generated events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV; $E_T^{miss}$(gen)$>250$ GeV.
Number of generated events for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).
Number of generated events for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Cross-section for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Cross-section for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Cross-section for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Cross-section for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).
Cross-section for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected tN_diag SR yields for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$, using the 2 highest $E_T^{miss}$ and 2 highest $m_T$ bins.
Combined experimental systematic uncertainty of expected tN_med SR yields for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected tN_boost SR yields for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected bCb_med2 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$, using the 2 highest $am_{T2}$ and 2 highest $m_T$ bins.
Combined experimental systematic uncertainty of expected bCc_diag SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected bCd_bulk SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$, using the 2 highest $am_{T2}$ and 2 highest $m_T$ bins.
Combined experimental systematic uncertainty of expected bCd_high1 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected bCd_high2 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected bCa_med SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Combined experimental systematic uncertainty of expected bCa_low SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Combined experimental systematic uncertainty of expected bCb_med1 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Combined experimental systematic uncertainty of expected bCb_high SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Combined experimental systematic uncertainty of expected 3-body SR yields for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$), using the 2 lowest $am_{T2}$ and 2 highest $m_T$ bins.
Combined experimental systematic uncertainty of expected tNbC_mix SR yields for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in tN_diag SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Observed CLs in tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Observed CLs in tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Observed CLs in bCb_med2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCd_bulk SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCa_med SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed CLs in bCa_low SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed CLs in bCb_med1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed CLs in bCb_high SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed CLs in 3-body SR for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).
Observed CLs in tNbC_mix SR for the mixed scenario (50% $\tilde t_1\to t\chi^0_1$, 50% $\tilde t_1\to b\chi^0_1$).
Expected CLs in tN_diag SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Expected CLs in tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Expected CLs in tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Expected CLs in bCb_med2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCd_bulk SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCa_med SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected CLs in bCa_low SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected CLs in bCb_med1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected CLs in bCb_high SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected CLs in 3-body SR for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).
Expected CLs in tNbC_mix SR for the mixed scenario (50% $\tilde t_1\to t\chi^0_1$, 50% $\tilde t_1\to b\chi^\pm_1$).
Results from a search for supersymmetry in events with four or more leptons including electrons, muons and taus are presented. The analysis uses a data sample corresponding to 20.3 $fb^{-1}$ of proton--proton collisions delivered by the Large Hadron Collider at $\sqrt{s}$ = 8 TeV and recorded by the ATLAS detector. Signal regions are designed to target supersymmetric scenarios that can be either enriched in or depleted of events involving the production of a $Z$ boson. No significant deviations are observed in data from Standard Model predictions and results are used to set upper limits on the event yields from processes beyond the Standard Model. Exclusion limits at the 95% confidence level on the masses of relevant supersymmetric particles are obtained. In R-parity-violating simplified models with decays of the lightest supersymmetric particle to electrons and muons, limits of 1350 GeV and 750 GeV are placed on gluino and chargino masses, respectively. In R-parity-conserving simplified models with heavy neutralinos decaying to a massless lightest supersymmetric particle, heavy neutralino masses up to 620 GeV are excluded. Limits are also placed on other supersymmetric scenarios.
The ETmiss distribution in VR0Z.
The effective mass distribution in VR0Z.
The ETmiss distribution in VR2Z.
The effective mass distribution in VR2Z.
The ETmiss distribution in SR0noZa.
The effective mass distribution in SR0noZa.
The ETmiss distribution in SR1noZa.
The effective mass distribution in SR1noZa.
The ETmiss distribution in SR2noZa.
The effective mass distribution in SR2noZa.
The ETmiss distribution in SR0noZb.
The effective mass distribution in SR0noZb.
The ETmiss distribution in SR1noZb.
The effective mass distribution in SR1noZb.
The ETmiss distribution in SR2noZb.
The effective mass distribution in SR2noZb.
The ETmiss distribution in SR0Z.
The effective mass distribution in SR0Z.
The ETmiss distribution in SR1Z.
The effective mass distribution in SR1Z.
The ETmiss distribution in SR2Z.
The effective mass distribution in SR2Z.
Observed 95% CL exclusion contour for the RPV chargino NLSP model with lambda_121 != 0.
Expected 95% CL exclusion contour for the RPV chargino NLSP model with lambda_121 != 0.
Observed 95% CL exclusion contour for the RPV chargino NLSP model with lambda_122 != 0.
Expected 95% CL exclusion contour for the RPV chargino NLSP model with lambda_122 != 0.
Observed 95% CL exclusion contour for the RPV chargino NLSP model with lambda_133 != 0.
Expected 95% CL exclusion contour for the RPV chargino NLSP model with lambda_133 != 0.
Observed 95% CL exclusion contour for the RPV chargino NLSP model with lambda_233 != 0.
Expected 95% CL exclusion contour for the RPV chargino NLSP model with lambda_233 != 0.
Observed 95% CL exclusion contour for the RPV gluino NLSP model with lambda_121 != 0.
Expected 95% CL exclusion contour for the RPV gluino NLSP model with lambda_121 != 0.
Observed 95% CL exclusion contour for the RPV gluino NLSP model with lambda_122 != 0.
Expected 95% CL exclusion contour for the RPV gluino NLSP model with lambda_122 != 0.
Observed 95% CL exclusion contour for the RPV gluino NLSP model with lambda_133 != 0.
Expected 95% CL exclusion contour for the RPV gluino NLSP model with lambda_133 != 0.
Observed 95% CL exclusion contour for the RPV gluino NLSP model with lambda_233 != 0.
Expected 95% CL exclusion contour for the RPV gluino NLSP model with lambda_233 != 0.
Observed 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_121 != 0.
Expected 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_121 != 0.
Observed 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_122 != 0.
Expected 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_122 != 0.
Observed 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_133 != 0.
Expected 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_133 != 0.
Observed 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_233 != 0.
Expected 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_233 != 0.
Observed 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_121 != 0.
Expected 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_121 != 0.
Observed 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_122 != 0.
Expected 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_122 != 0.
Observed 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_133 != 0.
Expected 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_133 != 0.
Observed 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_233 != 0.
Expected 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_233 != 0.
Observed 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_121 != 0.
Expected 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_121 != 0.
Observed 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_122 != 0.
Expected 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_122 != 0.
Observed 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_133 != 0.
Expected 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_133 != 0.
Observed 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_233 != 0.
Expected 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_233 != 0.
Observed 95% CL exclusion contour for the R-slepton RPC model.
Expected 95% CL exclusion contour for the R-slepton RPC model.
Observed and expected 95% CL cross-section upper limits for the Stau RPC model, together with the theoretically predicted cross-section.
Observed and expected 95% CL cross-section upper limits for the Z RPC model, together with the theoretically predicted cross-section.
Observed 95% CL exclusion contour for the GGM tan beta = 1.5 model.
Expected 95% CL exclusion contour for the GGM tan beta = 1.5 model.
Observed 95% CL exclusion contour for the GGM tan beta = 30 model.
Expected 95% CL exclusion contour for the GGM tan beta = 30 model.
Observed 95% CL cross-section upper limit for the RPV chargino NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the RPV chargino NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the RPV gluino NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the RPV gluino NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the RPV Lslepton NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the RPV Lslepton NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the RPV Rslepton NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the RPV Rslepton NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the RPV sneutrino NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the RPV sneutrino NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).
Observed 95% CL cross-section upper limit for the R-slepton RPC model, and the selection of Z-veto signal regions used to set limits in this model. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bbb' means that the regions SR0noZb, SR1noZb and SR2noZb were used, in addition to the three Z-rich regions (SR0-2Z). For the RPC stau and Z models, the ``aaa' combination of regions was used throughout.
Performance of the SR0noZa selection in the R-slepton RPC model: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.
Performance of the SR0noZb selection in the RPV chargino NLSP model with lambda_121 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.
Performance of the SR1noZa selection in the RPV sneutrino NLSP model with lambda_233 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.
Performance of the SR1noZb selection in the RPV gluino NLSP model with lambda_133 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.
Performance of the SR2noZa selection in the RPV sneutrino NLSP model with lambda_233 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.
Performance of the SR2noZb selection in the RPV gluino NLSP model with lambda_133 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.
Performance of the SR0Z selection in the GGM tan beta = 30 model: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.
Cut flows for a representative selection of SUSY signal points in the Z-veto signal regions. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the larger of the two masses. The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise.
Cut flows for a representative selection of SUSY signal points in the Z-rich signal regions. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the larger of the two masses (or the value of mu in the case of GGM models). The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise.
Cut flows by lepton channel for a representative selection of SUSY signal points in the SR0noZa signal region. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the larger of the two masses. The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise. The RPC R-slepton model is used, with (m2,m1) = (450,300) GeV.
Cut flows by lepton channel for a representative selection of SUSY signal points in the SR1noZb signal region. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the larger of the two masses. The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise. The RPV gluino NLSP model is used, with lambda_133 != 0 and (m2,m1) = (800,400) GeV.
Cut flows by lepton channel for a representative selection of SUSY signal points in the SR0Z signal region. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the value of mu. The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise. The GGM tan beta = 30 model is used, with (m2,m1) = (200,1000) GeV.
A search has been performed for the experimental signature of an isolated photon with high transverse momentum, at least one jet identified as originating from a bottom quark, and high missing transverse momentum. Such a final state may originate from supersymmetric models with gauge-mediated supersymmetry breaking in events in which one of a pair of higgsino-like neutralinos decays into a photon and a gravitino while the other decays into a Higgs boson and a gravitino. The search is performed using the full dataset of 7 TeV proton-proton collisions recorded with the ATLAS detector at the LHC in 2011, corresponding to an integrated luminosity of 4.7 fb-1. A total of 7 candidate events are observed while 7.5 pm 2.2 events are expected from the Standard Model background. The results of the search are interpreted in the context of general gauge mediation to exclude certain regions of a benchmark plane for higgsino-like neutralino production.
Missing ET distribution.
Signal Point Information: (1) Number of Monte Carlo events generated (2) Total signal cross section (pb) (3) Signal acceptance (4) Relative uncertainty on acceptance (5) CLs expected (6) CLs observed.
The observed limit contour in the GLUINO-NEUTRALINO plane.
The expected limit contour in the GLUINO-NEUTRALINO plane.
The observed limit contour in the SQUARK-NEUTRALINO plane.
The expected limit contour in the SQUARK-NEUTRALINO plane.
The results of a search for direct pair production of heavy top-quark partners in 4.7 fb-1 of integrated luminosity from pp collisions at sqrt(s) = 7 TeV collected by the ATLAS detector at the LHC are reported. Heavy top-quark partners decaying into a top quark and a neutral non-interacting particle are searched for in events with two leptons in the final state. No excess above the Standard Model expectation is observed. Limits are placed on the mass of a supersymmetric scalar top and of a spin-1/2 top-quark partner. A spin-1/2 top-quark partner with a mass between 300 GeV and 480 GeV, decaying to a top quark and a neutral non-interacting particle lighter than 100 GeV, is excluded at 95% confidence level.
(1) Number of generated MC events for the scalar top signal grid (2) Relative Cross section uncertainties for the scalar top signal grid.
(1) Acceptance of the same flavour selection for the scalar top signal grid (2) Selection efficiency of the same flavour selection for the scalar top signal grid (3) Product of the acceptance and efficiency of the same flavour selection for the scalar top signal grid (4) Relative experimental uncertainties on the acceptance times efficiency of the same flavour selection for the scalar top signal grid.
(1) Acceptance of the different flavour selection for the scalar top signal grid (2) Selection efficiency of the different flavour selection for the scalar top signal grid (3) Product of the acceptance and efficiency of the different flavour selection for the scalar top signal grid (4) Relative experimental uncertainties on the acceptance times efficiency of the different flavour selection for the scalar top signal grid.
(1) Number of generated MC events for the spin 1/2 top partner signal grid (2) Relative Cross section uncertainties for the spin 1/2 top partner signal grid.
(1) Acceptance of the same flavour selection for the spin 1/2 top partner signal grid (2) Selection efficiency of the same flavour selection for the spin 1/2 top partner signal grid (3) Product of the acceptance and efficiency of the same flavour selection for the spin 1/2 top partner signal grid (4) Relative experimental uncertainties on the acceptance times efficiency of the same flavour selection for the spin 1/2 top partner signal grid.
(1) Acceptance of the different flavour selection for the spin 1/2 top partner signal grid (2) Selection efficiency of the different flavour selection for the spin 1/2 top partner signal grid (3) Product of the acceptance and efficiency of the different flavour selection for the spin 1/2 top partner signal grid (4) Relative experimental uncertainties on the acceptance times efficiency of the different flavour selection for the spin 1/2 top partner signal grid.
(1) Observed CLs values for the scalar top signal grid (2) Expected CLs values for the scalar top signal grid.
(1) Observed CLs values for the spin 1/2 top partner signal grid (2) Expected CLs values for the spin 1/2 top partner signal grid.
Cross section limits [pb] for the scalar top signal grid.
Cross section limits [pb] for the spin 1/2 top partner signal grid.
Observed 95% CL limit for stop grid as a function of the scalar top and neutralino masses.
Observed 95% CL limit for stop grid as a function of the scalar top and neutralino masses, varying signal cross section of +1sigma.
Observed 95% CL limit for stop grid as a function of the scalar top and neutralino masses, varying signal cross section of -1sigma.
Expected 95% CL limit for stop grid as a function of the scalar top and neutralino masses.
Expected 95% CL limit for stop grid as a function of the scalar top and neutralino masses, varying the uncertainty of +1sigma.
Expected 95% CL limit for stop grid as a function of the scalar top and neutralino masses, varying the uncertainty of -1sigma.
Observed 95% CL limit for top partner grid as a function of the top partner and neutralino masses.
Observed 95% CL limit for top partner grid as a function of the top partner and neutralino masses, varying signal cross section of +1sigma.
Observed 95% CL limit for top partner grid as a function of the top partner and neutralino masses, varying signal cross section of -1sigma.
Expected 95% CL limit for top partner grid as a function of the top partner and neutralino masses.
Expected 95% CL limit for top partner grid as a function of the top partner and neutralino masses, varying the uncertainty of +1sigma.
Expected 95% CL limit for top partner grid as a function of the top partner and neutralino masses, varying the uncertainty of -1sigma.
A search is presented for direct top squark pair production in final states with one isolated electron or muon, jets, and missing transverse momentum in proton-proton collisions at sqrt(s) = 7 TeV. The measurement is based on 4.7 fb-1 of data collected with the ATLAS detector at the LHC. Each top squark is assumed to decay to a top quark and the lightest supersymmetric particle (LSP). The data are found to be consistent with Standard Model expectations. Top squark masses between 230 GeV and 440 GeV are excluded with 95% confidence for massless LSPs, and top squark masses around 400 GeV are excluded for LSP masses up to 125 GeV.
The observed and standard model prediction for the distribution of missing ET in signal region A.
The observed 95% exclusion limits for the five signal regions.
The expected 95% exclusion limits for the five signal regions.
The stop pair production cross section and its uncertainty due to PDF, factorization and the renormalization scales.
A search for the weak production of charginos and neutralinos into final states with three electrons or muons and missing transverse momentum is presented. The analysis uses 2.06 fb^-1 of sqrt(s) = 7 TeV proton-proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with standard model expectations in two signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric and simplified models. For the simplified models, degenerate lightest chargino and next-to-lightest neutralino masses up to 300 GeV are excluded for mass differences from the lightest neutralino up to 300 GeV.
Transverse momentum distribution for the first leading lepton for events in the SR1 signal region for DATA and SM predictions.
Transverse momentum distribution for the first leading lepton for events in the SR2 signal region for DATA and SM predictions.
Transverse momentum distribution for the second leading lepton for events in the SR1 signal region for DATA and SM predictions.
Transverse momentum distribution for the second leading lepton for events in the SR2 signal region for DATA and SM predictions.
Transverse momentum distribution for the third leading lepton for events in the SR1 signal region for DATA and SM predictions.
Transverse momentum distribution for the third leading lepton for events in the SR2 signal region for DATA and SM predictions.
Missing transverse energy for events in the SR1 signal region for DATA and SM predictions.
Missing transverse energy for events in the SR2 signal region for DATA and SM predictions.
Invariant mass of the same-flavour-opposite-sign (SFOS) lepton pair for events in the SR1 signal region for DATA and SM predictions.
The Cross Section in signal region SR1 for the SUSY pMSSM model with M1=100 GeV grid.
The Cross Section in signal region SR1 for the SUSY simplified model grid.
The Number of generated Events in signal region SR1 for the SUSY pMSSM model with M1=100 GeV grid.
The Number of generated Events in signal region SR1 for the SUSY simplified model grid.
The Efficiency in signal region SR1 for the SUSY pMSSM model with M1=100 GeV grid.
The Efficiency in signal region SR1 for the SUSY simplified model grid.
The Acceptance in signal region SR1 for the SUSY pMSSM model with M1=100 GeV grid.
The Acceptance in signal region SR1 for the SUSY simplified model grid.
The Acceptance*Efficiency in signal region SR1 for the SUSY pMSSM model with M1=100 GeV grid.
The Acceptance*Efficiency in signal region SR1 for the SUSY simplified model grid.
The Systematic Uncertainty of the data (excluding the Monte Carlo) in signal region SR1 for the SUSY pMSSM model with M1=100 GeV grid.
The Systematic Uncertainty of the data (excluding the Monte Carlo) in signal region SR1 for the SUSY simplified model grid.
CL values for the pMSSM with M1=100 GeV model grid for the SR1 signal region.
CL values for the simplified model model grid for the SR1 signal region.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.