Showing 10 of 6102 results
The factor of four increase in the LHC luminosity, from $0.5\times 10^{34}\,\textrm{cm}^{-2}\textrm{s}^{-1}$ to $2.0\times 10^{34}\textrm{cm}^{-2}\textrm{s}^{-1}$, and the corresponding increase in pile-up collisions during the 2015-2018 data-taking period, presented a challenge for ATLAS to trigger on missing transverse momentum. The output data rate at fixed threshold typically increases exponentially with the number of pile-up collisions, so the legacy algorithms from previous LHC data-taking periods had to be tuned and new approaches developed to maintain the high trigger efficiency achieved in earlier operations. A study of the trigger performance and comparisons with simulations show that these changes resulted in event selection efficiencies of >98% for this period, meeting and in some cases exceeding the performance of similar triggers in earlier run periods, while at the same time keeping the necessary bandwidth within acceptable limits.
A search for the direct production of the supersymmetric partners of $\tau$-leptons (staus) in final states with two hadronically decaying $\tau$-leptons is presented. The analysis uses a dataset of $pp$ collisions corresponding to an integrated luminosity of $139$ fb$^{-1}$, recorded with the ATLAS detector at the Large Hadron Collider at a center-of-mass energy of 13 TeV. No significant deviation from the expected Standard Model background is observed. Limits are derived in scenarios of direct production of stau pairs with each stau decaying into the stable lightest neutralino and one $\tau$-lepton in simplified models where the two stau mass eigenstates are degenerate. Stau masses from 120 GeV to 390 GeV are excluded at 95% confidence level for a massless lightest neutralino.
The observed upper limits on the model cross-section in units of pb for simplified models with combined ${\tilde{\tau}}^{+}_{R,L} {\tilde{\tau}}^{-}_{R,L}$ production. Three points at ${M({\tilde{\chi}}^{0}_{1})}=200GeV$ were removed from the plot but kept in the table because they overlapped with the plot's legend and are far from the exclusion contour.
The observed upper limits on the model cross-section in units of pb for simplified models with ${\tilde{\tau}}_L {\tilde{\tau}}_L$ only production. Three points at $M({\tilde{\chi}}^{0}_{1})=200GeV$ were removed from the plot but kept in the table because they overlapped with the plot's legend and are far from the exclusion contour.
The observed 95\% CL exclusion contours for the combined fit of SR-lowMass and SR-highMass for simplified models with combined ${\tilde{\tau}}^{+}_{R,L} {\tilde{\tau}}^{-}_{R,L}$ production.
The expected 95% CL exclusion contours for the combined fit of SR-lowMass and SR-highMass for simplified models with combined ${\tilde{\tau}}^{+}_{R,L} {\tilde{\tau}}^{-}_{R,L}$ production.
The observed 95% CL exclusion contours for the combined fit of SR-lowMass and SR-highMass for simplified models with ${\tilde{\tau}}_L {\tilde{\tau}}_L$ only production.
The expected 95% CL exclusion contours for the combined fit of SR-lowMass and SR-highMass for simplified models with ${\tilde{\tau}}_L {\tilde{\tau}}_L$ only production.
Observed 95% CL exclusion limits for simplified models with direct stau pair production in SR-lowMass.
Expected 95% CL exclusion limits for simplified models with direct stau pair production in SR-lowMass.
Observed 95% CL exclusion limits for simplified models with direct stau pair production in SR-highMass.
Expected 95% CL exclusion limits for simplified models with direct stau pair production in SR-highMass.
Signal acceptance in SR highMass for combined stau final states
Signal acceptance in SR lowMass for combined stau final states
Signal efficiency in SR highMass for combined stau final states
Signal efficiency in SR lowMass for combined stau final states
Signal acceptance*efficiency in SR highMass for combined stau final states
Signal acceptance*efficiency in SR lowMass for combined stau final states
Cutflow for two reference points (${\tilde{\tau}}^{+}_{R,L} {\tilde{\tau}}^{-}_{R,L}$ production) in SR. The column labelled $N_{weighted}$ shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$, while $N_{raw}$ in brackets shows the results for the generated number of events. The quoted uncertainties are statistical only. The "Generator filter" includes the requirements that two $\tau$ in the event have ${p}_{T} > 15$ GeV and $|\eta| <$ 2.6. The "Baseline Cut" includes the requirement of two baseline $\tau$ with a minimum value at 0.01 of the boosted decision tree discriminant (JetBDTSigTransMin $>$ 0.01) and ${p}_{T, \tau_{1}} > 50$ GeV and ${p}_{T, \tau_{2}} > 40$ GeV. At the step "Trigger & offline cuts", the following requirements are applied: the event is recorded using the asymmetric di-$\tau$ trigger (di-$\tau$ $E_{T}^{miss}$ trigger) in SR-lowMass (SR-highMass), and the lepton $p_{T}$ and $E_{T}^{miss}$ are required at plateau.
Observed and expected numbers of events in the control and signal regions where all control and signal region bins are included as constraints in the likelihood. The expected event yields of SM processes are given after the background-only fit. The entries marked as "--" are negligible. The uncertainties correspond to the sum in quadrature of statistical and systematic uncertainties. The correlation of systematic uncertainties among control regions and among background processes is fully taken into account.
The post-fit $m_{T2}$ distribution for SR-lowMass. The stacked histograms show the expected SM backgrounds. The multi-jet contribution is estimated from data using the ABCD method. The contributions of multi-jet and $W$+jets events are scaled with the corresponding normalization factors derived from the background-only fit. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distributions from the SUSY reference points are also shown as dashed lines. The last bin includes the overflow events.
The post-fit $m_{T2}$ distribution for SR-highMass. The stacked histograms show the expected SM backgrounds. The multi-jet contribution is estimated from data using the ABCD method. The contributions of multi-jet and $W$+jets events are scaled with the corresponding normalization factors derived from the background-only fit. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distributions from the SUSY reference points are also shown as dashed lines. The last bin includes the overflow events.
The $m_{T2}$ post-fit distributions in the multi-jet background validation region VR-F (lowMass). The stacked histograms show the contribution of each relevant SM process. The multi-jet shape is taken from VR-E in the ABCD method and the normalization is determined by the transfer factor $T$ and rescaled by a correction factor determined by the fit. The hatched bands represent the combined statistical and systematic uncertainties in the sum of the SM backgrounds shown. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.
The $m_{T2}$ post-fit distributions in the multi-jet background validation VR-F (highMass). The stacked histograms show the contribution of each relevant SM process. The multi-jet shape is taken from VR-E in the ABCD method and the normalization is determined by the transfer factor $T$ and rescaled by a correction factor determined by the fit. The hatched bands represent the combined statistical and systematic uncertainties in the sum of the SM backgrounds shown. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.
The $E_{T}^{miss}$ post-fit distributions in the multi-jet background validation region VR-F (lowMass). The stacked histograms show the contribution of each relevant SM process. The multi-jet shape is taken from VR-E in the ABCD method and the normalization is determined by the transfer factor $T$ and rescaled by a correction factor determined by the fit. The hatched bands represent the combined statistical and systematic uncertainties in the sum of the SM backgrounds shown. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.
The $E_{T}^{miss}$ post-fit distributions in the multi-jet background validation region VR-F (highMass). The stacked histograms show the contribution of each relevant SM process. The multi-jet shape is taken from VR-E in the ABCD method and the normalization is determined by the transfer factor $T$ and rescaled by a correction factor determined by the fit. The hatched bands represent the combined statistical and systematic uncertainties in the sum of the SM backgrounds shown. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.
The pre-fit $m_{T2}$ distribution in the $WCR$. The SM backgrounds other than multi-jet production are estimated from MC simulation. The multi-jet contribution is estimated from data using the OS--SS method. The hatched bands represent the combined statistical and systematic uncertainties of the total SM background. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.
The post-fit yields in the $WVR$, $TVRs$, $ZVRs$ and $VVVRs$. The SM backgrounds other than multi-jet production are estimated from MC simulation. The multi-jet contribution is negligible and is estimated from data using the ABCD method, using CRs obtained with the same technique used for the SRs. The hatched bands represent the combined statistical and systematic uncertainties of the total SM background. For illustration, the distributions of the SUSY reference points are also shown as dashed lines. The lower panels show the ratio of data to the SM background estimate.
This Letter presents direct searches for lepton flavour violation in Higgs boson decays, $H\rightarrow e\tau$ and $H\rightarrow\mu\tau$, performed with the ATLAS detector at the LHC. The searches are based on a data sample of proton-proton collisions at a centre-of-mass energy $\sqrt{s} = 13$ TeV, corresponding to an integrated luminosity of $36.1\,\mathrm{fb}^{-1}$. No significant excess is observed above the expected background from Standard Model processes. The observed (median expected) 95 % confidence-level upper limits on the lepton-flavour-violating branching ratios are $0.47\%$ ($0.34^{+0.13}_{-0.10}\,\%$) and $0.28\%$ ($0.37^{+0.14}_{-0.10}\,\%$) for $H\to e\tau$ and $H\to\mu\tau$, respectively.
95% CL upper limits on the branching ratio H --> e tau.
95% CL upper limits on the branching ratio H --> mu tau.
This paper presents a measurement of quantities related to the formation of jets from high-energy quarks and gluons (fragmentation). Jets with transverse momentum 100 GeV $<p_T<$ 2.5 TeV and pseudorapidity $|\eta| < 2.1$ from an integrated luminosity of 33 fb$^{-1}$ of $\sqrt{s}=13$ TeV proton-proton collisions are reconstructed with the ATLAS detector at the Large Hadron Collider. Charged-particle tracks with $p_T > 500$ MeV and $|\eta| < 2.5$ are used to probe the detailed structure of the jet. The fragmentation properties of the more forward and the more central of the two leading jets from each event are studied. The data are unfolded to correct for detector resolution and acceptance effects. Comparisons with parton shower Monte Carlo generators indicate that existing models provide a reasonable description of the data across a wide range of phase space, but there are also significant differences. Furthermore, the data are interpreted in the context of quark- and gluon-initiated jets by exploiting the rapidity dependence of the jet flavor fraction. A first measurement of the charged-particle multiplicity using model-independent jet labels (topic modeling) provides a promising alternative to traditional quark and gluon extractions using input from simulation. The simulations provide a reasonable description of the quark-like data across the jet $p_T$ range presented in this measurement, but the gluon-like data have systematically fewer charged particles than the simulations.
$\langle n_{ch} \rangle$, forward jet.
$\langle n_{ch} \rangle$, central jet.
$\langle \zeta \rangle$, forward jet.
$\langle \zeta \rangle$, central jet.
$\langle p_{T}^{rel} / GeV \rangle$, forward jet.
$\langle p_{T}^{rel} / GeV \rangle$, central jet.
$\langle r \rangle$, forward jet.
$\langle r \rangle$, central jet.
$\langle n_{ch} \rangle$, both jets.
$\langle \zeta \rangle$, combined jet.
$\langle p_{T}^{rel} / GeV \rangle$, both jets.
$\langle r \rangle$, both jets.
$n_{ch}$ , 100 GeV < Jet p_{T} < 200 GeV, both jets.
$n_{ch}$ , 200 GeV < Jet p_{T} < 300 GeV, both jets.
$n_{ch}$ , 300 GeV < Jet p_{T} < 400 GeV, both jets.
$n_{ch}$ , 400 GeV < Jet p_{T} < 500 GeV, both jets.
$n_{ch}$ , 500 GeV < Jet p_{T} < 600 GeV, both jets.
$n_{ch}$ , 600 GeV < Jet p_{T} < 700 GeV, both jets.
$n_{ch}$ , 700 GeV < Jet p_{T} < 800 GeV, both jets.
$n_{ch}$ , 800 GeV < Jet p_{T} < 900 GeV, both jets.
$n_{ch}$ , 900 GeV < Jet p_{T} < 1000 GeV, both jets.
$n_{ch}$ , 1000 GeV < Jet p_{T} < 1200 GeV, both jets.
$n_{ch}$ , 1200 GeV < Jet p_{T} < 1400 GeV, both jets.
$n_{ch}$ , 1400 GeV < Jet p_{T} < 1600 GeV, both jets.
$n_{ch}$ , 1600 GeV < Jet p_{T} < 2000 GeV, both jets.
$n_{ch}$ , 2000 GeV < Jet p_{T} < 2500 GeV, both jets.
$r$ , 100 GeV < Jet p_{T} < 200 GeV, both jets.
$r$ , 200 GeV < Jet p_{T} < 300 GeV, both jets.
$r$ , 300 GeV < Jet p_{T} < 400 GeV, both jets.
$r$ , 400 GeV < Jet p_{T} < 500 GeV, both jets.
$r$ , 500 GeV < Jet p_{T} < 600 GeV, both jets.
$r$ , 600 GeV < Jet p_{T} < 700 GeV, both jets.
$r$ , 700 GeV < Jet p_{T} < 800 GeV, both jets.
$r$ , 800 GeV < Jet p_{T} < 900 GeV, both jets.
$r$ , 900 GeV < Jet p_{T} < 1000 GeV, both jets.
$r$ , 1000 GeV < Jet p_{T} < 1200 GeV, both jets.
$r$ , 1200 GeV < Jet p_{T} < 1400 GeV, both jets.
$r$ , 1400 GeV < Jet p_{T} < 1600 GeV, both jets.
$r$ , 1600 GeV < Jet p_{T} < 2000 GeV, both jets.
$r$ , 2000 GeV < Jet p_{T} < 2500 GeV, both jets.
$\zeta$ , 100 GeV < Jet p_{T} < 200 GeV, both jets.
$\zeta$ , 200 GeV < Jet p_{T} < 300 GeV, both jets.
$\zeta$ , 300 GeV < Jet p_{T} < 400 GeV, both jets.
$\zeta$ , 400 GeV < Jet p_{T} < 500 GeV, both jets.
$\zeta$ , 500 GeV < Jet p_{T} < 600 GeV, both jets.
$\zeta$ , 600 GeV < Jet p_{T} < 700 GeV, both jets.
$\zeta$ , 700 GeV < Jet p_{T} < 800 GeV, both jets.
$\zeta$ , 800 GeV < Jet p_{T} < 900 GeV, both jets.
$\zeta$ , 900 GeV < Jet p_{T} < 1000 GeV, both jets.
$\zeta$ , 1000 GeV < Jet p_{T} < 1200 GeV, both jets.
$\zeta$ , 1200 GeV < Jet p_{T} < 1400 GeV, both jets.
$\zeta$ , 1400 GeV < Jet p_{T} < 1600 GeV, both jets.
$\zeta$ , 1600 GeV < Jet p_{T} < 2000 GeV, both jets.
$\zeta$ , 2000 GeV < Jet p_{T} < 2500 GeV, both jets.
$p_{T}^{rel} / GeV$ , 100 GeV < Jet p_{T} < 200 GeV, both jets.
$p_{T}^{rel} / GeV$ , 200 GeV < Jet p_{T} < 300 GeV, both jets.
$p_{T}^{rel} / GeV$ , 300 GeV < Jet p_{T} < 400 GeV, both jets.
$p_{T}^{rel} / GeV$ , 400 GeV < Jet p_{T} < 500 GeV, both jets.
$p_{T}^{rel} / GeV$ , 500 GeV < Jet p_{T} < 600 GeV, both jets.
$p_{T}^{rel} / GeV$ , 600 GeV < Jet p_{T} < 700 GeV, both jets.
$p_{T}^{rel} / GeV$ , 700 GeV < Jet p_{T} < 800 GeV, both jets.
$p_{T}^{rel} / GeV$ , 800 GeV < Jet p_{T} < 900 GeV, both jets.
$p_{T}^{rel} / GeV$ , 900 GeV < Jet p_{T} < 1000 GeV, both jets.
$p_{T}^{rel} / GeV$ , 1000 GeV < Jet p_{T} < 1200 GeV, both jets.
$p_{T}^{rel} / GeV$ , 1200 GeV < Jet p_{T} < 1400 GeV, both jets.
$p_{T}^{rel} / GeV$ , 1400 GeV < Jet p_{T} < 1600 GeV, both jets.
$p_{T}^{rel} / GeV$ , 1600 GeV < Jet p_{T} < 2000 GeV, both jets.
$p_{T}^{rel} / GeV$ , 2000 GeV < Jet p_{T} < 2500 GeV, both jets.
$n_{ch}$ , 100 GeV < Jet p_{T} < 200 GeV, more forward jet.
$n_{ch}$ , 200 GeV < Jet p_{T} < 300 GeV, more forward jet.
$n_{ch}$ , 300 GeV < Jet p_{T} < 400 GeV, more forward jet.
$n_{ch}$ , 400 GeV < Jet p_{T} < 500 GeV, more forward jet.
$n_{ch}$ , 500 GeV < Jet p_{T} < 600 GeV, more forward jet.
$n_{ch}$ , 600 GeV < Jet p_{T} < 700 GeV, more forward jet.
$n_{ch}$ , 700 GeV < Jet p_{T} < 800 GeV, more forward jet.
$n_{ch}$ , 800 GeV < Jet p_{T} < 900 GeV, more forward jet.
$n_{ch}$ , 900 GeV < Jet p_{T} < 1000 GeV, more forward jet.
$n_{ch}$ , 1000 GeV < Jet p_{T} < 1200 GeV, more forward jet.
$n_{ch}$ , 1200 GeV < Jet p_{T} < 1400 GeV, more forward jet.
$n_{ch}$ , 1400 GeV < Jet p_{T} < 1600 GeV, more forward jet.
$n_{ch}$ , 1600 GeV < Jet p_{T} < 2000 GeV, more forward jet.
$n_{ch}$ , 2000 GeV < Jet p_{T} < 2500 GeV, more forward jet.
$r$ , 100 GeV < Jet p_{T} < 200 GeV, more forward jet.
$r$ , 200 GeV < Jet p_{T} < 300 GeV, more forward jet.
$r$ , 300 GeV < Jet p_{T} < 400 GeV, more forward jet.
$r$ , 400 GeV < Jet p_{T} < 500 GeV, more forward jet.
$r$ , 500 GeV < Jet p_{T} < 600 GeV, more forward jet.
$r$ , 600 GeV < Jet p_{T} < 700 GeV, more forward jet.
$r$ , 700 GeV < Jet p_{T} < 800 GeV, more forward jet.
$r$ , 800 GeV < Jet p_{T} < 900 GeV, more forward jet.
$r$ , 900 GeV < Jet p_{T} < 1000 GeV, more forward jet.
$r$ , 1000 GeV < Jet p_{T} < 1200 GeV, more forward jet.
$r$ , 1200 GeV < Jet p_{T} < 1400 GeV, more forward jet.
$r$ , 1400 GeV < Jet p_{T} < 1600 GeV, more forward jet.
$r$ , 1600 GeV < Jet p_{T} < 2000 GeV, more forward jet.
$r$ , 2000 GeV < Jet p_{T} < 2500 GeV, more forward jet.
$\zeta$ , 100 GeV < Jet p_{T} < 200 GeV, more forward jet.
$\zeta$ , 200 GeV < Jet p_{T} < 300 GeV, more forward jet.
$\zeta$ , 300 GeV < Jet p_{T} < 400 GeV, more forward jet.
$\zeta$ , 400 GeV < Jet p_{T} < 500 GeV, more forward jet.
$\zeta$ , 500 GeV < Jet p_{T} < 600 GeV, more forward jet.
$\zeta$ , 600 GeV < Jet p_{T} < 700 GeV, more forward jet.
$\zeta$ , 700 GeV < Jet p_{T} < 800 GeV, more forward jet.
$\zeta$ , 800 GeV < Jet p_{T} < 900 GeV, more forward jet.
$\zeta$ , 900 GeV < Jet p_{T} < 1000 GeV, more forward jet.
$\zeta$ , 1000 GeV < Jet p_{T} < 1200 GeV, more forward jet.
$\zeta$ , 1200 GeV < Jet p_{T} < 1400 GeV, more forward jet.
$\zeta$ , 1400 GeV < Jet p_{T} < 1600 GeV, more forward jet.
$\zeta$ , 1600 GeV < Jet p_{T} < 2000 GeV, more forward jet.
$\zeta$ , 2000 GeV < Jet p_{T} < 2500 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 100 GeV < Jet p_{T} < 200 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 200 GeV < Jet p_{T} < 300 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 300 GeV < Jet p_{T} < 400 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 400 GeV < Jet p_{T} < 500 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 500 GeV < Jet p_{T} < 600 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 600 GeV < Jet p_{T} < 700 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 700 GeV < Jet p_{T} < 800 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 800 GeV < Jet p_{T} < 900 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 900 GeV < Jet p_{T} < 1000 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 1000 GeV < Jet p_{T} < 1200 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 1200 GeV < Jet p_{T} < 1400 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 1400 GeV < Jet p_{T} < 1600 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 1600 GeV < Jet p_{T} < 2000 GeV, more forward jet.
$p_{T}^{rel} / GeV$ , 2000 GeV < Jet p_{T} < 2500 GeV, more forward jet.
$n_{ch}$ , 100 GeV < Jet p_{T} < 200 GeV, more central jet.
$n_{ch}$ , 200 GeV < Jet p_{T} < 300 GeV, more central jet.
$n_{ch}$ , 300 GeV < Jet p_{T} < 400 GeV, more central jet.
$n_{ch}$ , 400 GeV < Jet p_{T} < 500 GeV, more central jet.
$n_{ch}$ , 500 GeV < Jet p_{T} < 600 GeV, more central jet.
$n_{ch}$ , 600 GeV < Jet p_{T} < 700 GeV, more central jet.
$n_{ch}$ , 700 GeV < Jet p_{T} < 800 GeV, more central jet.
$n_{ch}$ , 800 GeV < Jet p_{T} < 900 GeV, more central jet.
$n_{ch}$ , 900 GeV < Jet p_{T} < 1000 GeV, more central jet.
$n_{ch}$ , 1000 GeV < Jet p_{T} < 1200 GeV, more central jet.
$n_{ch}$ , 1200 GeV < Jet p_{T} < 1400 GeV, more central jet.
$n_{ch}$ , 1400 GeV < Jet p_{T} < 1600 GeV, more central jet.
$n_{ch}$ , 1600 GeV < Jet p_{T} < 2000 GeV, more central jet.
$n_{ch}$ , 2000 GeV < Jet p_{T} < 2500 GeV, more central jet.
$r$ , 100 GeV < Jet p_{T} < 200 GeV, more central jet.
$r$ , 200 GeV < Jet p_{T} < 300 GeV, more central jet.
$r$ , 300 GeV < Jet p_{T} < 400 GeV, more central jet.
$r$ , 400 GeV < Jet p_{T} < 500 GeV, more central jet.
$r$ , 500 GeV < Jet p_{T} < 600 GeV, more central jet.
$r$ , 600 GeV < Jet p_{T} < 700 GeV, more central jet.
$r$ , 700 GeV < Jet p_{T} < 800 GeV, more central jet.
$r$ , 800 GeV < Jet p_{T} < 900 GeV, more central jet.
$r$ , 900 GeV < Jet p_{T} < 1000 GeV, more central jet.
$r$ , 1000 GeV < Jet p_{T} < 1200 GeV, more central jet.
$r$ , 1200 GeV < Jet p_{T} < 1400 GeV, more central jet.
$r$ , 1400 GeV < Jet p_{T} < 1600 GeV, more central jet.
$r$ , 1600 GeV < Jet p_{T} < 2000 GeV, more central jet.
$r$ , 2000 GeV < Jet p_{T} < 2500 GeV, more central jet.
$\zeta$ , 100 GeV < Jet p_{T} < 200 GeV, more central jet.
$\zeta$ , 200 GeV < Jet p_{T} < 300 GeV, more central jet.
$\zeta$ , 300 GeV < Jet p_{T} < 400 GeV, more central jet.
$\zeta$ , 400 GeV < Jet p_{T} < 500 GeV, more central jet.
$\zeta$ , 500 GeV < Jet p_{T} < 600 GeV, more central jet.
$\zeta$ , 600 GeV < Jet p_{T} < 700 GeV, more central jet.
$\zeta$ , 700 GeV < Jet p_{T} < 800 GeV, more central jet.
$\zeta$ , 800 GeV < Jet p_{T} < 900 GeV, more central jet.
$\zeta$ , 900 GeV < Jet p_{T} < 1000 GeV, more central jet.
$\zeta$ , 1000 GeV < Jet p_{T} < 1200 GeV, more central jet.
$\zeta$ , 1200 GeV < Jet p_{T} < 1400 GeV, more central jet.
$\zeta$ , 1400 GeV < Jet p_{T} < 1600 GeV, more central jet.
$\zeta$ , 1600 GeV < Jet p_{T} < 2000 GeV, more central jet.
$\zeta$ , 2000 GeV < Jet p_{T} < 2500 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 100 GeV < Jet p_{T} < 200 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 200 GeV < Jet p_{T} < 300 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 300 GeV < Jet p_{T} < 400 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 400 GeV < Jet p_{T} < 500 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 500 GeV < Jet p_{T} < 600 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 600 GeV < Jet p_{T} < 700 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 700 GeV < Jet p_{T} < 800 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 800 GeV < Jet p_{T} < 900 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 900 GeV < Jet p_{T} < 1000 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 1000 GeV < Jet p_{T} < 1200 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 1200 GeV < Jet p_{T} < 1400 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 1400 GeV < Jet p_{T} < 1600 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 1600 GeV < Jet p_{T} < 2000 GeV, more central jet.
$p_{T}^{rel} / GeV$ , 2000 GeV < Jet p_{T} < 2500 GeV, more central jet.
A search is presented for new phenomena in events characterised by high jet multiplicity, no leptons (electrons or muons), and four or more jets originating from the fragmentation of $b$-quarks ($b$-jets). The search uses 139 fb$^{-1}$ of $\sqrt{s}$ = 13 TeV proton-proton collision data collected by the ATLAS experiment at the Large Hadron Collider during Run 2. The dominant Standard Model background originates from multijet production and is estimated using a data-driven technique based on an extrapolation from events with low $b$-jet multiplicity to the high $b$-jet multiplicities used in the search. No significant excess over the Standard Model expectation is observed and 95% confidence-level limits that constrain simplified models of R-parity-violating supersymmetry are determined. The exclusion limits reach 950 GeV in top-squark mass in the models considered.
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <br><br> <b>Exclusion contours:</b> <ul> <li><a href="?table=stbchionly_obs">Stop to bottom quark and chargino exclusion contour (Obs.)</a> <li><a href="?table=stbchionly_exp">Stop to bottom quark and chargino exclusion contour (Exp.)</a> <li><a href="?table=stbchi_obs">Stop to higgsino LSP exclusion contour (Obs.)</a> <li><a href="?table=stbchi_exp">Stop to higgsino LSP exclusion contour (Exp.)</a> <li><a href="?table=sttN_obs">Stop to top quark and neutralino exclusion contour (Obs.)</a> <li><a href="?table=sttN_exp">Stop to top quark and neutralino exclusion contour (Exp.)</a> </ul> <b>Upper limits:</b> <ul> <li><a href="?table=stbchionly_xSecUL_obs">Obs Xsection upper limit in stop to bottom quark and chargino</a> <li><a href="?table=stop_xSecUL_obs">Obs Xsection upper limit in higgsino LSP</a> <li><a href="?table=stbchionly_xSecUL_exp">Exp Xsection upper limit in stop to bottom quark and chargino</a> <li><a href="?table=stop_xSecUL_exp">Exp Xsection upper limit in higgsino LSP</a> </ul> <b>Kinematic distributions:</b> <ul> <li><a href="?table=SR_yields">SR_yields</a> </ul> <b>Cut flows:</b> <ul> <li><a href="?table=cutflow">cutflow</a> </ul> <b>Acceptance and efficiencies:</b> As explained in <a href="https://twiki.cern.ch/twiki/bin/view/AtlasPublic/SupersymmetryPublicResults#summary_of_auxiliary_material">the twiki</a>. <ul> <li> <b>stbchi_6je4be:</b> <a href="?table=stbchi_Acc_6je4be">stbchi_Acc_6je4be</a> <a href="?table=stbchi_Eff_6je4be">stbchi_Eff_6je4be</a> <li> <b>stbchi_7je4be:</b> <a href="?table=stbchi_Acc_7je4be">stbchi_Acc_7je4be</a> <a href="?table=stbchi_Eff_7je4be">stbchi_Eff_7je4be</a> <li> <b>stbchi_8je4be:</b> <a href="?table=stbchi_Acc_8je4be">stbchi_Acc_8je4be</a> <a href="?table=stbchi_Eff_8je4be">stbchi_Eff_8je4be</a> <li> <b>stbchi_9ji4be:</b> <a href="?table=stbchi_Acc_9ji4be">stbchi_Acc_9ji4be</a> <a href="?table=stbchi_Eff_9ji4be">stbchi_Eff_9ji4be</a> <li> <b>stbchi_6je5bi:</b> <a href="?table=stbchi_Acc_6je5bi">stbchi_Acc_6je5bi</a> <a href="?table=stbchi_Eff_6je5bi">stbchi_Eff_6je5bi</a> <li> <b>stbchi_7je5bi:</b> <a href="?table=stbchi_Acc_7je5bi">stbchi_Acc_7je5bi</a> <a href="?table=stbchi_Eff_7je5bi">stbchi_Eff_7je5bi</a> <li> <b>stbchi_8je5bi:</b> <a href="?table=stbchi_Acc_8je5bi">stbchi_Acc_8je5bi</a> <a href="?table=stbchi_Eff_8je5bi">stbchi_Eff_8je5bi</a> <li> <b>stbchi_9ji5bi:</b> <a href="?table=stbchi_Acc_9ji5bi">stbchi_Acc_9ji5bi</a> <a href="?table=stbchi_Eff_9ji5bi">stbchi_Eff_9ji5bi</a> <li> <b>stbchi_8ji5bi:</b> <a href="?table=stbchi_Acc_8ji5bi">stbchi_Acc_8ji5bi</a> <a href="?table=stbchi_Eff_8ji5bi">stbchi_Eff_8ji5bi</a> <li> <b>sttN_6je4be:</b> <a href="?table=sttN_Acc_6je4be">sttN_Acc_6je4be</a> <a href="?table=sttN_Eff_6je4be">sttN_Eff_6je4be</a> <li> <b>sttN_7je4be:</b> <a href="?table=sttN_Acc_7je4be">sttN_Acc_7je4be</a> <a href="?table=sttN_Eff_7je4be">sttN_Eff_7je4be</a> <li> <b>sttN_8je4be:</b> <a href="?table=sttN_Acc_8je4be">sttN_Acc_8je4be</a> <a href="?table=sttN_Eff_8je4be">sttN_Eff_8je4be</a> <li> <b>sttN_9ji4be:</b> <a href="?table=sttN_Acc_9ji4be">sttN_Acc_9ji4be</a> <a href="?table=sttN_Eff_9ji4be">sttN_Eff_9ji4be</a> <li> <b>sttN_6je5bi:</b> <a href="?table=sttN_Acc_6je5bi">sttN_Acc_6je5bi</a> <a href="?table=sttN_Eff_6je5bi">sttN_Eff_6je5bi</a> <li> <b>sttN_7je5bi:</b> <a href="?table=sttN_Acc_7je5bi">sttN_Acc_7je5bi</a> <a href="?table=sttN_Eff_7je5bi">sttN_Eff_7je5bi</a> <li> <b>sttN_8je5bi:</b> <a href="?table=sttN_Acc_8je5bi">sttN_Acc_8je5bi</a> <a href="?table=sttN_Eff_8je5bi">sttN_Eff_8je5bi</a> <li> <b>sttN_9ji5bi:</b> <a href="?table=sttN_Acc_9ji5bi">sttN_Acc_9ji5bi</a> <a href="?table=sttN_Eff_9ji5bi">sttN_Eff_9ji5bi</a> <li> <b>sttN_8ji5bi:</b> <a href="?table=sttN_Acc_8ji5bi">sttN_Acc_8ji5bi</a> <a href="?table=sttN_Eff_8ji5bi">sttN_Eff_8ji5bi</a> </ul> <b>Truth Code snippets</b> and <b>SLHA</a> files are available under "Resources" (purple button on the left)
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{\pm}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown for $B(\tilde{t} \rightarrow b \chi^{+}_{1})$ equal to unity.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{\pm}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contour are excluded. Limits are shown for $B(\tilde{t} \rightarrow b \chi^{+}_{1})$ equal to unity.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown in the case of a higgsino LSP. The results are constrained by the kinematic limits of the top-squark decay into a chargino and a bottom quark (upper diagonal line) and into a neutralino and a top quark (lower diagonal line), respectively.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown in the case of a higgsino LSP. The results are constrained by the kinematic limits of the top-squark decay into a chargino and a bottom quark (upper diagonal line) and into a neutralino and a top quark (lower diagonal line), respectively.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown for the region $m_{\tilde{t}} - m_{\tilde{\chi}^0_{1,2}, \tilde{\chi}^\pm_{1}} \geq m_\text{top}$ where $B(\tilde{t} \rightarrow b \chi^{+}_{1}) = B(\tilde{t} \rightarrow t \chi^{0}_{1,2}) = 0.5$.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded. Limits are shown for the region $m_{\tilde{t}} - m_{\tilde{\chi}^0_{1,2}, \tilde{\chi}^\pm_{1}} \geq m_\text{top}$ where $B(\tilde{t} \rightarrow b \chi^{+}_{1}) = B(\tilde{t} \rightarrow t \chi^{0}_{1,2}) = 0.5$.
Observed model-dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{\pm}_{1})$ signal grid. Limits are shown for $B(\tilde{t} \rightarrow b \chi^{+}_{1})$ equal to unity.
Observed model-dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{\pm}_{1} / \tilde{\chi}^{0}_{1,2})$ signal grid. Limits are shown in the case of a higgsino LSP. The results are constrained by the kinematic limits of the top-squark decay into a chargino and a bottom quark (upper diagonal line) and into a neutralino and a top quark (lower diagonal line), respectively.
Expected model-dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{\pm}_{1})$ signal grid. Limits are shown for $B(\tilde{t} \rightarrow b \chi^{+}_{1})$ equal to unity.
Expected model-dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{\pm}_{1} / \tilde{\chi}^{0}_{1,2})$ signal grid. Limits are shown in the case of a higgsino LSP. The results are constrained by the kinematic limits of the top-squark decay into a chargino and a bottom quark (upper diagonal line) and into a neutralino and a top quark (lower diagonal line), respectively.
Expected background and observed number of events in different jet and $b$-tag multiplicity bins.
Cut flow for a model of top-squark pair production with the top squark decaying to a $b$-quark and a chargino. The chargino decays through the non-zero RPV coupling $\lambda^{''}_{323}$ via a virtual top squark to $bbs$ quark triplets ($m_{\tilde{t}}$ = 800 GeV, $m_{\tilde{\chi}^{\pm}_{1}}$ = 750 GeV). The multijet trigger consists of four jets satisfying $p_{\text{T}}\geq(100)120$ GeV for the 2015-2016 (2017-2018) data period. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed. The numbers in $N_{\text{weighted}}$ are normalized by the integrated luminosity of 139 fb$^{-1}$.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
Signal acceptance for $\tilde{t} \rightarrow t\tilde{\chi}^{0}_{1,2}(\tilde{\chi}^{0}_{1,2} \rightarrow tbs) / b\tilde{\chi}^{+}_{1}(\tilde{\chi}^{+}_{1} \rightarrow \bar{b}\bar{b}\bar{s}) $ and c.c. model. Please mind that the acceptance given in the table is reported in %.
This paper presents a search for new heavy particles decaying into a pair of top quarks using 139 fb$^{-1}$ of proton--proton collision data recorded at a centre-of-mass energy of $\sqrt{s}=13$ TeV with the ATLAS detector at the Large Hadron Collider. The search is performed using events consistent with pair production of high-transverse-momentum top quarks and their subsequent decays into the fully hadronic final states. The analysis is optimized for resonances decaying into a $t\bar{t}$ pair with mass above 1.4 TeV, exploiting a dedicated multivariate technique with jet substructure to identify hadronically decaying top quarks using large-radius jets and evaluating the background expectation from data. No significant deviation from the background prediction is observed. Limits are set on the production cross-section times branching fraction for the new $Z'$ boson in a topcolor-assisted-technicolor model. The $Z'$ boson masses below 3.9 and 4.7 TeV are excluded at 95% confidence level for the decay widths of 1% and 3%, respectively.
Acceptance and acceptance times selection efficiency as a function of $m^{gen}_{t\bar{t}}$ in SR$1b$. The acceptance is measured as the fraction of events with two leading truth-contained large-$R$ jets, both satisfying the kinematic requirements, but not containing generator-level electrons or muons, as described in the paper. The acceptance $\times$ efficiency is calculated with respect to the full analysis selections including top- and $b$-tagging requirements on the two leading large-$R$ jets. The $m^{gen}_{t\bar{t}}$ is calculated from the momenta of top and anti-top quarks at the generator level before final-state radiation. The branching fractions of the $t \bar{t}$ into all possible final states are included in the acceptance calculation.
Acceptance and acceptance times selection efficiency as a function of $m^{gen}_{t\bar{t}}$ in SR$2b$. The acceptance is measured as the fraction of events with two leading truth-contained large-$R$ jets, both satisfying the kinematic requirements, but not containing generator-level electrons or muons, as described in the paper. The acceptance $\times$ efficiency is calculated with respect to the full analysis selections including top- and $b$-tagging requirements on the two leading large-$R$ jets. The $m^{gen}_{t\bar{t}}$ is calculated from the momenta of top and anti-top quarks at the generator level before final-state radiation. The branching fractions of the $t \bar{t}$ into all possible final states are included in the acceptance calculation.
Observed $m_{t\bar{t}}^{reco}$ distributions in data for SR$1b$, shown together with the result of the fit with the three-shape-parameter function. The error bars indicate the effect of the fit parameter uncertainty on the background prediction. The bin width of the distributions is chosen to be the same as that used in the background parameterization.
Observed $m_{t\bar{t}}^{reco}$ distributions in data for SR$2b$, shown together with the result of the fit with the three-shape-parameter function. The error bars indicate the effect of the fit parameter uncertainty on the background prediction. The bin width of the distributions is chosen to be the same as that used in the background parameterization.
Observed and expected upper limits on the cross-section times branching fraction of the $Z'_{TC2} \rightarrow t\bar{t}$ as a function of the $Z'_{TC2}$ mass ($\Gamma/m = 1.2$%).
Fit parameter values obtained from fits to data in the two signal regions. The fit function is $f(x) = p_{0} (1-x)^{p_{1}} x^{p_{2} + p_{3} \log(x)}$, where $x = m^{reco}_{t\bar{t}}/\sqrt{s}$.
A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell $W$ and $Z$ bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of $\sqrt{s}$ = 13 TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139 fb$^{-1}$. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015-2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full dataset are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV.
Distributions in SR-low of the data and post-fit background prediction for m<sub>T</sub>. The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for H<sup>boost</sup>. The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for m<sub>eff</sub><sup>3ℓ</sup>/H<sup>boost</sup>. The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-low of the data and post-fit background prediction for p<sub>T</sub><sup>soft</sup>/(p<sub>T</sub><sup>soft</sup> + m<sub>eff</sub><sup>3ℓ</sup>). The SR-low event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for m<sub>T</sub>. The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for R(E<sub>T</sub><sup>miss</sup>,jets). The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for p<sub>T</sub><sup>soft</sup>. The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Distributions in SR-ISR of the data and post-fit background prediction for p<sub>T</sub><sup>jets</sup>. The SR-ISR event selections are applied for each distribution except for the variable shown, where the selection is indicated by a red arrow. The normalization factor for the WZ background is derived from the background-only estimation described in Section 7. The expected distribution for a benchmark signal model is included for comparison. The first (last) bin includes underflow (overflow). The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. The bottom panel shows the ratio of the data to the post-fit background prediction. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Observed exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Expected exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Plus 1$\sigma$ uncertainty, varying the signal cross section within its uncertainty, on the observed exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Minus 1$\sigma$ uncertainty, varying the signal cross section within its uncertainty, on the observed exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Plus 1$\sigma$ uncertainty, due to uncertainties in the background prediction and experimental uncertainties affecting the signal, on the expected exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Minus 1$\sigma$ uncertainty, due to uncertainties in the background prediction and experimental uncertainties affecting the signal, on the expected exclusion contour on C1N2 production assuming on-shell $W/Z$ decays as a function of the C1/N2 and N1 masses, and derived from the combined fit of low-mass and ISR regions.
Upper limits on observed wino-bino simplified model signal cross section $\sigma_\text{obs}^\text{95}$.
Upper limits on expected wino-bino simplified model signal cross section $\sigma_\text{exp}^\text{95}$.
Signal acceptance in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal efficiency in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal acceptance in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal efficiency in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} \geq 100$ GeV.
Signal acceptance in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal efficiency in SR-low, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal acceptance in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
Signal efficiency in SR-ISR, for signals with $m(\widetilde{\chi}^{\pm}_{1}/\widetilde{\chi}^{0}_{2}) - m\widetilde{\chi}^{0}_{1} < 100$ GeV.
The observed and expected yields after the background-only fit in the SRs. The normalization factors of the $WZ$ sample for the low-mass and ISR regions are different and are treated separately in the combined fit. \The "Top-quark like" category contains the tt̄, Wt, and WW processes while the "Others" category contains backgrounds from triboson production and processes that include a Higgs boson, 3 or more tops, and tops produced in association with W or Z bosons. Combined statistical and systematic uncertainties are presented. The individual uncertainties can be correlated and do not necessarily add in quadrature to equal the total background uncertainty.
Summary of the expected background and data yields in $\text{SR-low}$ and $\text{SR-ISR}$. The second and third columns show the data and total expected background with systematic uncertainties. The fourth column gives the model-independent upper limits at 95\% CL on the visible cross section ($\sigma_\text{vis}$). The fifth and sixth columns give the visible number of observed ($S^{95}_\text{obs}$) and expected ($S^{95}_\text{exp}$) events of a generic beyond-the-SM process, where uncertainties on $S^{95}_\text{exp}$ reflect the $\pm 1 \sigma$ uncertainties on the background estimation. The last column shows the discovery $p$-value and Gaussian significance $Z$ assuming no signal.
Upper limits on observed (expected) wino-bino simplified model signal cross section $\sigma_\text{obs(exp)}^\text{95}$.
Full list of event selections and MC generator-weighted yields and in $\text{SR-ISR}$ for the main $WZ$ background and a representative $\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2}$ signal point of mass 200 GeV and mass splitting $\Delta m = 100$ GeV normalized to 139 fb$^{-1}$. 40000 events were generated.
Full list of event selections and MC generator-weighted yields and in $\text{SR-low}$ for the main $WZ$ background and a representative $\tilde{\chi}^{\pm}_{1}\tilde{\chi}^{0}_{2}$ signal point of mass 200 GeV and mass splitting $\Delta m = 100$ GeV normalized to 139 fb$^{-1}$. 40000 events were generated.
This paper presents results of searches for electroweak production of supersymmetric particles in models with compressed mass spectra. The searches use 139 fb$^{-1}$ of $\sqrt{s}=13$ TeV proton-proton collision data collected by the ATLAS experiment at the Large Hadron Collider. Events with missing transverse momentum and two same-flavor, oppositely charged, low transverse momentum leptons are selected, and are further categorized by the presence of hadronic activity from initial-state radiation or a topology compatible with vector-boson fusion processes. The data are found to be consistent with predictions from the Standard Model. The results are interpreted using simplified models of $R$-parity-conserving supersymmetry in which the lightest supersymmetric partner is a neutralino with a mass similar to the lightest chargino, the second-to-lightest neutralino or the slepton. Lower limits on the masses of charginos in different simplified models range from 193 GeV to 240 GeV for moderate mass splittings, and extend down to mass splittings of 1.5 GeV to 2.4 GeV at the LEP chargino bounds (92.4 GeV). Similar lower limits on degenerate light-flavor sleptons extend up to masses of 251 GeV and down to mass splittings of 550 MeV. Constraints on vector-boson fusion production of electroweak SUSY states are also presented.
Expected 95% CL exclusion sensitivity for simplified models of direct higgsino production.
Expected 95% CL exclusion sensitivity for simplified models of direct higgsino production.
Expected 95% CL exclusion sensitivity for simplified models of direct higgsino production.
Expected 95% CL exclusion sensitivity for simplified models of direct higgsino production.
Observed 95% CL exclusion sensitivity for simplified models of direct higgsino production.
Observed 95% CL exclusion sensitivity for simplified models of direct higgsino production.
Observed 95% CL exclusion sensitivity for simplified models of direct higgsino production.
Observed 95% CL exclusion sensitivity for simplified models of direct higgsino production.
Expected 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Expected 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Expected 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Expected 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Expected 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Expected 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Expected 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Expected 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Expected 95% CL exclusion sensitivity for simplified models of VBF wino-bino production.
Expected 95% CL exclusion sensitivity for simplified models of VBF wino-bino production.
Expected 95% CL exclusion sensitivity for simplified models of VBF wino-bino production.
Expected 95% CL exclusion sensitivity for simplified models of VBF wino-bino production.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production.
Observed 95% CL exclusion sensitivity for simplified models of direct wino-bino production.
Expected 95% CL exclusion sensitivity for simplified models of direct slepton production.
Expected 95% CL exclusion sensitivity for simplified models of direct slepton production.
Expected 95% CL exclusion sensitivity for simplified models of direct slepton production.
Expected 95% CL exclusion sensitivity for simplified models of direct slepton production.
Observed 95% CL exclusion sensitivity for simplified models of direct slepton production.
Observed 95% CL exclusion sensitivity for simplified models of direct slepton production.
Observed 95% CL exclusion sensitivity for simplified models of direct slepton production.
Observed 95% CL exclusion sensitivity for simplified models of direct slepton production.
Expected 95% CL exclusion sensitivity for simplified models of direct LH smuon production.
Expected 95% CL exclusion sensitivity for simplified models of direct LH smuon production.
Expected 95% CL exclusion sensitivity for simplified models of direct smuon production.
Expected 95% CL exclusion sensitivity for simplified models of direct smuon production.
Observed 95% CL exclusion sensitivity for simplified models of direct LH smuon production.
Observed 95% CL exclusion sensitivity for simplified models of direct LH smuon production.
Observed 95% CL exclusion sensitivity for simplified models of direct smuon production.
Observed 95% CL exclusion sensitivity for simplified models of direct smuon production.
Expected 95% CL exclusion sensitivity for simplified models of direct RH smuon production.
Expected 95% CL exclusion sensitivity for simplified models of direct RH smuon production.
Expected 95% CL exclusion sensitivity for simplified models of direct selectron production.
Expected 95% CL exclusion sensitivity for simplified models of direct selectron production.
Observed 95% CL exclusion sensitivity for simplified models of direct RH smuon production.
Observed 95% CL exclusion sensitivity for simplified models of direct RH smuon production.
Observed 95% CL exclusion sensitivity for simplified models of direct selectron production.
Observed 95% CL exclusion sensitivity for simplified models of direct selectron production.
Expected 95% CL exclusion sensitivity for simplified models of direct LH selectron production.
Expected 95% CL exclusion sensitivity for simplified models of direct LH selectron production.
Expected 95% CL exclusion sensitivity for simplified models of direct LH slepton production.
Expected 95% CL exclusion sensitivity for simplified models of direct LH slepton production.
Observed 95% CL exclusion sensitivity for simplified models of direct LH selectron production.
Observed 95% CL exclusion sensitivity for simplified models of direct LH selectron production.
Observed 95% CL exclusion sensitivity for simplified models of direct LH slepton production.
Observed 95% CL exclusion sensitivity for simplified models of direct LH slepton production.
Expected 95% CL exclusion sensitivity for simplified models of direct RH selectron production.
Expected 95% CL exclusion sensitivity for simplified models of direct RH selectron production.
Expected 95% CL exclusion sensitivity for simplified models of direct RH slepton production.
Expected 95% CL exclusion sensitivity for simplified models of direct RH slepton production.
Observed 95% CL exclusion sensitivity for simplified models of direct RH selectron production.
Observed 95% CL exclusion sensitivity for simplified models of direct RH selectron production.
Observed 95% CL exclusion sensitivity for simplified models of direct RH slepton production.
Observed 95% CL exclusion sensitivity for simplified models of direct RH slepton production.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Expected 95% CL exclusion sensitivity for simplified models of direct LH smuon production.
Expected 95% CL exclusion sensitivity for simplified models of direct LH smuon production.
Efficiency for the C1C1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Observed 95% CL exclusion sensitivity for simplified models of direct LH smuon production.
Observed 95% CL exclusion sensitivity for simplified models of direct LH smuon production.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Expected 95% CL exclusion sensitivity for simplified models of direct RH smuon production.
Expected 95% CL exclusion sensitivity for simplified models of direct RH smuon production.
Efficiency for the C1C1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Observed 95% CL exclusion sensitivity for simplified models of direct RH smuon production.
Observed 95% CL exclusion sensitivity for simplified models of direct RH smuon production.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Expected 95% CL exclusion sensitivity for simplified models of direct LH selectron production.
Expected 95% CL exclusion sensitivity for simplified models of direct LH selectron production.
Efficiency for the C1C1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Observed 95% CL exclusion sensitivity for simplified models of direct LH selectron production.
Observed 95% CL exclusion sensitivity for simplified models of direct LH selectron production.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Expected 95% CL exclusion sensitivity for simplified models of direct RH selectron production.
Expected 95% CL exclusion sensitivity for simplified models of direct RH selectron production.
Efficiency for the N2N1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Observed 95% CL exclusion sensitivity for simplified models of direct RH selectron production.
Observed 95% CL exclusion sensitivity for simplified models of direct RH selectron production.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2N1 higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1p higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the slepton process in the SR-S region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the slepton process in the SR-S region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-high region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S-high region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S-high region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the slepton process in the SR-S-high region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the slepton process in the SR-S-high region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-low region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S-low region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S-low region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the slepton process in the SR-S-low region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the slepton process in the SR-S-low region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-med region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Efficiency for the N2C1m higgsino process in the SR-E-1l1T region. Truth dilepton invariant mass is constrained to be within the range [0.5,60] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the slepton process in the SR-S region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the slepton process in the SR-S region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S-high region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S-high region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the slepton process in the SR-S-high region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the slepton process in the SR-S-high region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S-low region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-3}$) for the slepton process in the SR-S-low region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the slepton process in the SR-S-low region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Efficiency for the slepton process in the SR-S-low region. Truth stransverse mass is constrained to be within the range [100,140] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the C1C1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the C1C1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2N1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2N1 VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Observed and Expected upper cross-section limits for wino-bino scenarios, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Observed and Expected upper cross-section limits for wino-bino scenarios, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1p VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Observed and Expected upper cross-section limits for wino-bino scenarios, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Observed and Expected upper cross-section limits for wino-bino scenarios, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1p VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Observed and Expected upper cross-section limits for higgsino scenarios.
Observed and Expected upper cross-section limits for higgsino scenarios.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Observed and Expected upper cross-section limits for higgsino scenarios, assuming VBF production..
Observed and Expected upper cross-section limits for higgsino scenarios, assuming VBF production..
Efficiency for the N2C1m VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF-high region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Observed and Expected upper cross-section limits for direct slepton scenarios.
Observed and Expected upper cross-section limits for direct slepton scenarios.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Observed and Expected upper cross-section limits for direct LH slepton scenarios.
Observed and Expected upper cross-section limits for direct LH slepton scenarios.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF-low region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Observed and Expected upper cross-section limits for direct RH slepton scenarios.
Observed and Expected upper cross-section limits for direct RH slepton scenarios.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Acceptance (note the $z$-axis is in units of $10^{-4}$) for the N2C1m VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Observed and Expected upper cross-section limits for direct smuon scenarios.
Observed and Expected upper cross-section limits for direct smuon scenarios.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Efficiency for the N2C1m VBF higgsino process in the SR-VBF region. Truth dilepton invariant mass is constrained to be within the range [1,40] GeV.
Observed and Expected upper cross-section limits for direct LH smuon scenarios.
Observed and Expected upper cross-section limits for direct LH smuon scenarios.
Observed and Expected upper cross-section limits for wino-bino scenarios, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Observed and Expected upper cross-section limits for wino-bino scenarios, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})>0$.
Observed and Expected upper cross-section limits for direct RH smuon scenarios.
Observed and Expected upper cross-section limits for direct RH smuon scenarios.
Observed and Expected upper cross-section limits for wino-bino scenarios, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Observed and Expected upper cross-section limits for wino-bino scenarios, assuming $m(\tilde{\chi}_{2}^{0}) \times m(\tilde{\chi}_{1}^{0})<0$.
Observed and Expected upper cross-section limits for direct selectron scenarios.
Observed and Expected upper cross-section limits for direct selectron scenarios.
Observed and Expected upper cross-section limits for higgsino scenarios.
Observed and Expected upper cross-section limits for higgsino scenarios.
Observed and Expected upper cross-section limits for direct LH selectron scenarios.
Observed and Expected upper cross-section limits for direct LH selectron scenarios.
Observed and Expected upper cross-section limits for higgsino scenarios, assuming VBF production..
Observed and Expected upper cross-section limits for higgsino scenarios, assuming VBF production..
Observed and Expected upper cross-section limits for direct RH selectron scenarios.
Observed and Expected upper cross-section limits for direct RH selectron scenarios.
Observed and Expected upper cross-section limits for direct slepton scenarios.
Observed and Expected upper cross-section limits for direct slepton scenarios.
Number of signal events in SR-E-1L1T for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-1L1T for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Observed and Expected upper cross-section limits for direct LH slepton scenarios.
Observed and Expected upper cross-section limits for direct LH slepton scenarios.
Number of signal events in SR-E-high for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-high for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Observed and Expected upper cross-section limits for direct RH slepton scenarios.
Observed and Expected upper cross-section limits for direct RH slepton scenarios.
Number of signal events in SR-E-low for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-low for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Observed and Expected upper cross-section limits for direct smuon scenarios.
Observed and Expected upper cross-section limits for direct smuon scenarios.
Number of signal events in SR-E-med for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-med for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Observed and Expected upper cross-section limits for direct LH smuon scenarios.
Observed and Expected upper cross-section limits for direct LH smuon scenarios.
Number of signal events in SR-S-high for the (m($\tilde{\ell}$),m($\tilde{\chi}_{1}^{0}$)) = (150 GeV, 140 GeV) Slepton signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-S-high for the (m($\tilde{\ell}$),m($\tilde{\chi}_{1}^{0}$)) = (150 GeV, 140 GeV) Slepton signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Observed and Expected upper cross-section limits for direct RH smuon scenarios.
Observed and Expected upper cross-section limits for direct RH smuon scenarios.
Number of signal events in SR-S-low for the (m($\tilde{\ell}$),m($\tilde{\chi}_{1}^{0}$)) = (150 GeV, 140 GeV) Slepton signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-S-low for the (m($\tilde{\ell}$),m($\tilde{\chi}_{1}^{0}$)) = (150 GeV, 140 GeV) Slepton signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Observed and Expected upper cross-section limits for direct selectron scenarios.
Observed and Expected upper cross-section limits for direct selectron scenarios.
Number of signal events in SR-VBF for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (100 GeV, 95 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-VBF for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (100 GeV, 95 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Observed and Expected upper cross-section limits for direct LH selectron scenarios.
Observed and Expected upper cross-section limits for direct LH selectron scenarios.
Observed and Expected upper cross-section limits for direct RH selectron scenarios.
Observed and Expected upper cross-section limits for direct RH selectron scenarios.
Number of signal events in SR-E-1L1T for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-1L1T for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-high for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-high for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-low for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-low for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-med for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-E-med for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (155 GeV, 150 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-S-high for the (m($\tilde{\ell}$),m($\tilde{\chi}_{1}^{0}$)) = (150 GeV, 140 GeV) Slepton signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-S-high for the (m($\tilde{\ell}$),m($\tilde{\chi}_{1}^{0}$)) = (150 GeV, 140 GeV) Slepton signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-S-low for the (m($\tilde{\ell}$),m($\tilde{\chi}_{1}^{0}$)) = (150 GeV, 140 GeV) Slepton signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-S-low for the (m($\tilde{\ell}$),m($\tilde{\chi}_{1}^{0}$)) = (150 GeV, 140 GeV) Slepton signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-VBF for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (100 GeV, 95 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
Number of signal events in SR-VBF for the (m($\tilde{\chi}_{2}^{0}$),m($\tilde{\chi}_{1}^{0}$)) = (100 GeV, 95 GeV) Higgsino signal model at different stages of selection before and after weighting events to correspond to 140/fb.
A search for supersymmetric partners of gluons and quarks is presented, involving signatures with jets and either two isolated leptons (electrons or muons) with the same electric charge, or at least three isolated leptons. A data sample of proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded with the ATLAS detector at the Large Hadron Collider between 2015 and 2018, corresponding to a total integrated luminosity of 139 fb$^{-1}$, is used for the search. No significant excess over the Standard Model expectation is observed. The results are interpreted in simplified supersymmetric models featuring both R-parity conservation and R-parity violation, raising the exclusion limits beyond those of previous ATLAS searches to 1600 GeV for gluino masses and 750 GeV for bottom and top squark masses in these scenarios.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
The results of a search for electroweakino pair production $pp \rightarrow \tilde\chi^\pm_1 \tilde\chi^0_2$ in which the chargino ($\tilde\chi^\pm_1$) decays into a $W$ boson and the lightest neutralino ($\tilde\chi^0_1$), while the heavier neutralino ($\tilde\chi^0_2$) decays into the Standard Model 125 GeV Higgs boson and a second $\tilde\chi^0_1$ are presented. The signal selection requires a pair of $b$-tagged jets consistent with those from a Higgs boson decay, and either an electron or a muon from the $W$ boson decay, together with missing transverse momentum from the corresponding neutrino and the stable neutralinos. The analysis is based on data corresponding to 139 $\mathrm{fb}^{-1}$ of $\sqrt{s}=13$ TeV $pp$ collisions provided by the Large Hadron Collider and recorded by the ATLAS detector. No statistically significant evidence of an excess of events above the Standard Model expectation is found. Limits are set on the direct production of the electroweakinos in simplified models, assuming pure wino cross-sections. Masses of $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ up to 740 GeV are excluded at 95% confidence level for a massless $\tilde{\chi}^{0}_{1}$.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status
Email
Forum
Twitter
GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.